Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PENETRATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Optimization and guidance of penetration landing trajectories in a windshear

The optimization and guidance of penetration landing trajectories in a windshear are considered. It is assumed that the aircraft is controlled by the angle of attack and the power setting. For the optimal trajectory, the performance index being minimized measures the deviation of the flight trajectory from the nominal trajectory. In turn, the nominal trajectory includes two parts: the approach part (nominal glide slope constant) and the flare part (nominal glide slope varying linearly with the horizontal distance). Numerical results show that the optimal trajectory deviates somewhat from the nominal trajectory in the shear region. A guidance scheme is developed to approximate the optimal trajectory. The angle of attack is determined by the windshear intensity, the absolute path inclination, and the glide slope angle, while the power setting is determined by the windshear intensity and the velocity. Numerical results indicate that the guidance trajectory is close to the optimal trajectory.

Miele, A.↗

Delaminations in composite plates caused by non-penetrating impact

A model is presented for estimating the dimensions of delaminations in continuous fiber reinforced composite plates subjected to non-penetrating (low velocity) impact of a solid object. The model is based on dimensional analysis, and results in two simple, closed form expressions, one providing the delamination length, the other the delamination width. Comparisons of delamination lengths and widths calculated by these expressions with experimental data suggest that the model predicts these dimensions with reasonable accuracy.

Finn, Scott R.↗

Systematic variation of magnetic-field penetration depth in high-Tc superconductors studied by muon-spin relaxation

The muon relaxation rate (sigma) was measured in the high critical temperature superconductors YBa2Cu3O(x) for x = 6.66, 6.95, 7.0, and La1.85 SrO.15 CuO4 in transverse external magnetic fields 1 is approximately 4 kG. A simple relation is found which connects the transition temperature T(c), the magnetic field penetration depth lambda(L), the carrier concentration n(s) and the effective mass m* as T(c) varies as sigma which varies as 1/lambda(L) squared which varies as n(s)/m*. The linear dependence T(c) varies as n(s)/m* suggests a high energy scale for the coupling between superconducting carriers.

Uemura, Y. J.↗

Penetrative convective flows induced by internal heating and mantle compressibility

Penetrative convective flows induced in a spherical shell by combined effects of internal heating and mantle compressibility are investigated using mathematical and numerical formulations for compressible spherical shell convection. Isothermal stress-free boundary conditions applied at the top and the bottom of the shell are solved using a time-dependent finite difference code in a temperature, vorticity, stream function formulation for Rayleigh numbers ranging from the critical Rc up to 2000 Rc. Results indicate that compressibility, together with internal heating, could be a mechanism capable of generating spontaneously layered convection and local melting in the mantle and that non-Boussinesq effects must be considered in interpretations of geophysical phenomena.

Machetel, Philippe↗

Magnetically-Guided Penetrant Applicator

Small wheeled vehicle moved inside nonmagnetic enclosure. Miniature magnetically guided truck uses foam-rubber sponge pads to apply penetrant fluid for inspection of welds in hidden surfaces of nonmagnetic tubes. Risk of explosion less than if electric motor used to drive vehicle. Inexpensive to make and made in range of sizes.

Molina, Orlando G.↗

Filter Enhances Fluorescent-Penetrant-Inspecting Borescope

Slip-on eyepiece for commercial ultraviolet-light borescope reduces both amount of short-wave ultraviolet light that reaches viewer's eye and apparent intensity of unwanted reflections of white light from surfaces undergoing inspection. Fits on stock eyepiece of borescope, which illuminates surface inspected with intense ultraviolet light. Surface, which is treated with fluorescent dye, emits bright-green visible light wherever dye penetrates - in cracks and voids. Eyepiece contains deep-yellow Wratten 15 (G) filter, which attenuates unwanted light strongly but passes yellow-green fluorescence so defects seen clearly.

Molina, Orlando G.↗

Milder Etchant For Penetrant Inspection

New etching solution for chemical penetrant inspection of Inconel(R) 718 castings and weldments. Etchant does not introduce artifacts mistaken for defects. Applied by swabbing or by immersion. Used to detect unwanted residues of Nioro(R) (or equivalent) gold brazing alloy on type 347 stainless steel.

O'Tousa, Joseph E.↗

Enhancement Of Penetrant-Inspection Images

Proposed computerized video system processes images of fluorescent dyes absorbed in flaws in welds. Video camera, held by operator or by remote manipulator, views weld illuminated by visible white and ultraviolet light. Images of penetrating dye in cracks and voids in weld joint appear on video monitor. Fluorescent features enhanced by software to facilitate identification of true flaws and record important data.

Wilson, Rhonda C.↗

An EPR methodology for measuring the London penetration depth for the ceramic superconductors

The use is discussed of electron paramagnetic resonance (EPR) as a quick and easily accessible method for measuring the London penetration depth, lambda for the high T(sub c) superconductors. The method utilizes the broadening of the EPR signal, due to the emergence of the magnetic flux lattice, of a free radical adsorbed on the surface of the sample. The second moment, of the EPR signal below T(sub c) is fitted to the Brandt equation for a simple triangular lattice. The precision of this method compares quite favorably with those of the more standard methods such as micro sup(+)SR, Neutron scattering, and magnetic susceptibility.

Rakvin, B.↗

Solar activity influence on cosmic ray penetration in the middle atmosphere

A new improved model for cosmic rays-middle atmosphere interaction is developed. The ionization q(h)-profile dependence on penetrating high energy particles composition (protons, alpha-particles and heavier nuclei) and energy spectra (solar activity modulation included) are investigated. A computer program, realizing the Gaussian algorithm for solving of multidimensional integrals is created. The corresponding electron density profiles N(h) at solar minimum and maximum are obtained.

Vellinov, P. I.↗

Intensive MHD-structures penetration in the middle atmosphere initiated in the ionospheric cusp under quiet geomagnetic conditions

In connection with the recently detected quasiperiodical magnetic disturbances in the ionospheric cusp, the penetration of compressional surface magnetohydrodynamic (MHD) waves through the middle atmosphere is modelled numerically. For the COSPAR International Reference Atmosphere (CIRA) 72 model the respective energy density flux of the disturbances in the middle atmosphere is determined. On the basis of the developed model certain conclusions are reached about the height distribution of the structures (energy losses, currents, etc.) initiated by intensive magnetic cusp disturbances.

Mateev, L. N.↗

Design and Evaluation of Candidate Pressure Distribution and Air Data System Tile Penetration for the Aeroassist Flight Experiment

This program objectives were to produce a pressure measurements system that penetrates the thermal protection system of a spacecraft and is able to obtain accurate pressure data. The design was tested vibro-acoustically, aerothermally, and structurally and found to be adequate. This design is a possible replacement of the current pressure system on the orbiter.

Vontheumer, Alfred E.↗

Penetrable Linear-Gap Pressure Seal

Pair of opposed inflatable rubber tubes allow object to be moved between them while maintaining pressure seal. Conceived for pressurized wind tunnel into which sensor probes inserted and positioned from outside. Probe moved along seal gap, pushed inward, and/or pulled outward while different pressures maintained inside and outside tunnel. Replaces bulky sealing unit. Adaptable to other situations in which objects must penetrate pressure walls and move along them. Works as well for vacuum chambers and for pressure vessels. Also applicable to dust seals not having to withstand differential pressures.

Trimarchi, Paul↗

Determination of surface resistance and magnetic penetration depth of superconducting YBa2Cu3O(7-delta) thin films by microwave power transmission measurements

A novel waveguide power transmission measurement technique was developed to extract the complex conductivity of superconducting thin films at microwave frequencies. The microwave conductivity was taken of two laser ablated YBa2Cu3O(7-delta) thin films on LaAlO3 with transition temperatures of approx. 86.3 and 82 K, respectively, in the temperature range 25 to 300 K. From the conductivity values, the penetration depth was found to be approx. 0.54 and 0.43 micron, and the surface resistance (R sub s) to be approx. 24 and 36 micro-Ohms at 36 GHz and 76 K for the two films under consideration. The R sub s values were compared with those obtained from the change in the Q-factor of a 36 GHz Te sub 011-mode (OFHC) copper cavity by replacing one of its end walls with the superconducting sample. This technique allows noninvasive characterization of high transition temperature superconducting thin films at microwave frequencies.

Bhasin, K. B.↗

Mars penetrator sample retrieval system

Three University of Wisconsin-Madison space studies are discussed briefly. The Mars Penetrator Retrieval System, used to acquire and analyze soil samples from a region approximately 15 to 30 feet below the Martian surface, uses a drill bit with three cutting tips arranged in a radially terraced formation. A prototype was built and tested. The Mars Egg is a small surface analyzer that would be dropped on the surface of Mars from an orbiter and would analyze the gases present in the surface soil over a period of one Martian year to determine the diffusivity of the soil. The egg contains a gas chromatograph, radio transmitter, and the necessary power supplies. Also discussed is the design of a GeoShack, a manned or unmanned mini-space station in geosynchronous orbit, designed for the repair, attitude correction, and general upkeep of satellites in geosynchnonous orbit.

Source record↗

Airborne Ground Penetrating Radar (GPR) for peat analyses in the Canadian Northern wetlands study

The study was conducted as part of the NASA Biospherics Research on Emissions from Wetlands (BREW) program. An important aspect of the program is to investigate the terrestrial production and atmospheric distribution of methane and other gases contributing to global warming. Multi-kilometer transects of airborne (helicopter) Ground Penetrating Radar (GPR) data were collected periodically along the 100 km distance from the coast inland so as to obtain a regional trend in peat depth and related parameters. Global Positioning System (GPS) data were simultaneously collected from the helicopter to properly georeference the GPR data. Additional 50 m ground-based transects of GPR data were also collected as a source of ground truthing, as a calibration aid for the airborne data sets, and as a source of higher resolution data for characterizing the strata within the peat. In situ peat depth probing and soil characterizations from excavated soil pits were used to verify GPR findings. Results from the ground-based data are presented.

Pelletier-Travis, Ramona E.↗

Influence of penetrating solar radiation on the heat budget of the equatorial Pacific Ocean

Recent satellite observations of ocean transparency, coupled with climatological surface heat fluxes and ocean density profiles, are used here to show that solar radiation in visible frequencies, usually assumed to be absorbed at the sea surface, in fact penetrates to a significant degree to below the upper mixed layer of the ocean which interacts actively with the atmosphere. The net effect is a reduction of the heat input into the upper layer; for a 20 m-thick mixed layer this is equivalent to an annual reduction in temperature of about 5-10 K. The results provide a natural explanation for the discrepancy between the SSTs predicted by models and those observed.

Lewis, Marlon R.↗

The effect of volume phase changes, mass transport, sunlight penetration, and densification on the thermal regime of icy regoliths

The present quantitative modeling of convective, condensational, and sublimational effects on porous ice crust volumes subjected to solar radiation encompasses the effect of such insolation's penetration of visible bandpass-translucent light, but opaque to the IR bandpass. Quasi-steady-state temperatures, H2O mass fluxes, and ice mass-density change rates are computed as functions of time of day and ice depth. When the effects of latent heat and mass transport are included in the model, the enhancement of near-surface temperature due to the 'solid-state greenhouse effect' is substantially diminished. When latent heat, mass transport, and densification effects are considered, however, a significant solid-state greenhouse effect is shown to be compatible with both morphological evidence for high crust strengths and icy shell decoupling from the lithosphere.

Fanale, Fraser P.↗