Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PARTIAL PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Heterogeneous Interactions of ClONO2 and HCl with Sulfuric Acid Tetrahydrate: Implications for the Stratosphere

The reaction probabilities for ClONO2+H2O- HOCl + HNO3 and ClONO2+ HCl Cl2 +HNO3 have been investigated on sulfuric acid tetrahydrate (SAT, H2SO4-4H2O)surfaces at temperatures between 190 and 230 K and at reactant concentrations that are typical in the lower stratosphere, using a fast-flow reactor coupled to a quadrupole mass spectrometer. The results indicate that the reaction probabilities as well as HCl uptake depend strongly on the thermodynamic state of SAT surface: they decrease significantly with decreasing H2O partial pressure at a given temperature, and decrease with increasing temperature at a given H2O partial pressure, as the SAT changes from the H2O-rich form to the H2SO4-rich form. For H2O-rich SAT at 195 K gamma(sub 1) approx. = -0.01 and gamma(sub 2) greater or equal to 0.1, whereas the values for H2SO4-rich SAT decrease by more than 2 orders of magnitude. At low concentrations of HCl, close to those found in the stratosphere, the amount of HCl taken up by H2O-rich SAT films corresponds to a coverage of the order of a tenth of a monolayer (approx. = 10(exp 14) molecules/sq cm); H2SO4-rich SAT films take up 2 orders of magnitude less HCl (les than 10(exp 12) molecules/sq cm). Substantial HCl uptake at high HCl concentrations is also observed, as a result of surface melting. The data reveal that frozen stratospheric sulfate aerosols may play an important role in chlorine activation in the winter polar stratosphere via processes similar to those occurring on the surfaces of polar stratospheric cloud particles.

Zhang, Renyi↗

Cyclic catalytic upgrading of chemical species using metal oxide materials

Processes are disclosure which comprise alternately contacting an oxygen-carrying catalyst with a reducing substance, or a lower partial pressure of an oxidizing gas, and then with the oxidizing gas or a higher partial pressure of the oxidizing gas, whereby the catalyst is alternately reduced and then regenerated to an oxygenated state. In certain embodiments, the oxygen-carrying catalyst comprises at least one metal oxide-containing material containing a composition having one of the following formulas: (a) Ce.sub.xB.sub.yB'.sub.zB''O.sub..delta., wherein B=Ba, Sr, Ca, or Zr; B'=Mn, Co, or Fe; B''=Cu; 0.01<x<0.99; 0<y<0.6; 0<z<0.5; and 1<.delta.<2.2; (b) Sr.sub.vLa.sub.wB.sub.xB'.sub.yB''.sub.zO.sub..delta., wherein B=Co or Fe; B'=Al or Ga; B''=Cu; 0.01<v<1.4; 0.1<w<1.6; 0.1<x<1.9; 0.1<y<0.9; 0<z<2.2; and 3<.delta.<5.5).

White, James H.↗

Cyclic Catalytic Upgrading of Chemical Species Using Metal Oxide Materials

Processes are disclosure which comprise alternately contacting an oxygen-carrying catalyst with a reducing substance, or a lower partial pressure of an oxidizing gas, and then with the oxidizing gas or a higher partial pressure of the oxidizing gas, whereby the catalyst is alternately reduced and then regenerated to an oxygenated state. In certain embodiments, the oxygen-carrying catalyst comprises at least one metal oxide-containing material containing a composition having the following formulas: (a) Ce(sub x)B(sub y)B'(sub z)B''O(sub gamma; wherein B=Ba, Sr, Ca, or Zr; B'=Mn, Co, and/or Fe; B''=Cu; 0.01<x<0.99; 0<y<0.6; 0<z<0.5; (b) Ce(sub 1-x-y) Ni(sub x) B(sub y) O(sub 2-*), wherein B=Zr, Ba, Ca, La, or K; 0.02<x<0.1; 0<y<0.1; and 0.02<*<0.15; and 1<delta<2.2 and (c) coal ash either as a catalyst material itself or as a support for said unary or binary metal oxides.

White, James H.↗

Cyclic catalytic upgrading of chemical species using metal oxide materials

Processes are disclosure which comprise alternately contacting an oxygen-carrying catalyst with a reducing substance, or a lower partial pressure of an oxidizing gas, and then with the oxidizing gas or a higher partial pressure of the oxidizing gas, whereby the catalyst is alternately reduced and then regenerated to an oxygenated state. In certain embodiments, the oxygen-carrying catalyst comprises at least one metal oxide-containing material containing a composition having one of the following formulas: (a) Ce.sub.xB.sub.yB'.sub.zB''O.sub..delta., wherein B=Ba, Sr, Ca, or Zr; B'=Mn, Co, or Fe; B''=Cu; 0.01<x<0.99; 0<y<0.6; 0<z<0.5; and 1<.delta.<2.2; (b) Sr.sub.vLa.sub.wB.sub.xB'.sub.yB''.sub.zO.sub..delta., wherein B=Co or Fe; B'=Al or Ga; B''=Cu; 0.01<v<1.4; 0.1<w<1.6; 0.1<x<1.9; 0.1<y<0.9; 0<z<2.2; and 3<.delta.<5.5).

White, James H↗

Cyclic catalytic upgrading of chemical species using metal oxide materials

Processes are disclosure which comprise alternately contacting an oxygen-carrying catalyst with a reducing substance, or a lower partial pressure of an oxidizing gas, and then with the oxidizing gas or a higher partial pressure of the oxidizing gas, whereby the catalyst is alternately reduced and then regenerated to an oxygenated state. In certain embodiments, the oxygen-carrying catalyst comprises at least one metal oxide-containing material containing a composition having the following formulas: (a) Ce.sub.xB.sub.yB&#x27;.sub.zB&#x27;&#x27;O.sub..delta., wherein B=Ba, Sr, Ca, or Zr; B&#x27;=Mn, Co, and/or Fe; B&#x27;&#x27;=Cu; 0.01<x<0.99; 0<y<0.6; 0<z<0.5; (b) Ce.sub.1-x-yNi.sub.xB.sub.yO.sub.2-*, wherein B=Zr, Ba, Ca, La, or K; 0.02<x<0.1; 0<y<0.1; and 0.02<*<0.15; and 1<.delta.<2.2 and (c) coal ash either as a catalyst material itself or as a support for said unary or binary metal oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetic Modeling of the Reaction Rate for Quartz and Carbon Black Pellet

The kinetic modeling for the carbothermal reduction reaction rate in quartz and carbon black pellets is studied at different temperatures, under varying CO partial pressures in ambient atmosphere, varying carbon contents, different quartz particle sizes, and different crucible opening areas. Carbon black is produced by the cracking of natural gas. The activation energy of the SiC-producing step was determined to be 594 kJ/mol. The averaged pre-exponential factor A obtained from 1898 K, 1923 K, and 1948 K (1625 °C, 1650 °C, and 1675 °C) is 2.62E+16 min -1 . The reaction rate of the gas-solid interface factor, fix-C content (X fix-C ), temperature (T), and CO partial pressure (X CO ) can be expressed as follows:((d pct)/(dt))=(1-0.40×X fix-C -0.86 ×pct)×2.62×10 16 ×exp(-(594000/(RT)))×(2.6-0.015×X co ).

36 MATERIALS SCIENCE↗

High-temperature electron-hole transport in PrBaCo{sub 2}O{sub 5+{delta}}

The oxygen content, conductivity and thermopower in the double perovskite-like cobaltite PrBaCo{sub 2}O{sub 5+{delta}} are reported in the oxygen partial pressure range 2x10{sup -6}-0.21 atm and temperatures between 650 and 950 deg. C. The electrical properties are shown to be continuous through the transition from {delta}>0.5 to {delta}<0.5. The variations of transport parameters with temperature and oxygen content reveal hole polaron hopping conduction within oxygen non-stoichiometry domain {delta}<0.5. - Graphical abstract: Electrical properties in PrBaCo{sub 2}O5+{delta} depending on oxygen content at 800 deg. C. Highlights: > The oxygen content in PrBaCo{sub 2}O{sub 5+{delta}} is studied depending on temperature and oxygen partial pressure. > The transport parameter variations reveal hole polaron conduction. > The electrical properties are continuous through the transition from {delta}>0.5 to {delta}<0.5.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dissecting the Performance of Nanoporous Gold Catalysts for Oxygen-Assisted Coupling of Methanol with Fundamental Mechanistic and Kinetic Information

The utility of the surface reactivity observed for model systems under ultrahigh vacuum for predicting the performance of catalytic materials under ambient flow conditions is a highly debated topic in heterogeneous catalysis. Herein we show that vast differences in selectivity observed for methanol self-coupling across wide ranges of temperature and reactant pressure can be accurately predicted utilizing the kinetics and mechanism obtained from model studies on gold single crystals in ultrahigh vacuum regressed to fit transient pulse responses over nanoporous gold (Ag 0.03 Au 0.97 ) at low pressures. Specifically, microkinetic modeling of the complex sequence of elementary steps governing this reaction predicts the dramatic effect of reactant partial pressure on the product distribution and leads to conclusion that the gas phase partial pressures of both reactants and the reaction temperature determine the changes in selectivity to methyl formate formation. Moreover, thorough analysis of the reaction network indicates that the product distribution becomes increasingly insensitive to kinetic effects at pressures approaching 1 bar, leading toward 100% selectivity methyl formate. A rigorous kinetic sensitivity analysis also demonstrates the complex interplay of the kinetics of the elementary steps and the overall catalytic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-temperature transport properties, thermal expansion and cathodic performance of Ni-substituted LaSr{sub 2}Mn{sub 2}O{sub 7-{delta}}

The substitution of manganese with nickel in LaSr{sub 2}Mn{sub 2}O{sub 7-{delta}}, where the solubility limit corresponds to approximately 25% Mn sites, enhances the Ruddlesden-Popper phase stability at elevated temperatures and atmospheric oxygen pressure. The total conductivity of LaSr{sub 2}Mn{sub 2-y}Ni{sub y}O{sub 7-{delta}} (y=0-0.4) decreases with nickel additions, whilst the average thermal expansion coefficients calculated from dilatometric data in the temperature range 300-1370 K increase from (11.4-13.7)x10{sup -6} K{sup -1} at y=0 up to (12.5-14.4)x10{sup -6} K{sup -1} at y=0.4. The conductivity and Seebeck coefficient of LaSr{sub 2}Mn{sub 1.6}Ni{sub 0.4}O{sub 7-{delta}}, analyzed in the oxygen partial pressure range 10{sup -15}-0.3 atm at 600-1270 K, display that the electronic transport is n-type and occurs via a small polaron mechanism. Reductive decomposition is observed at the oxygen pressures close to Ni/NiO boundary, namely {approx}2.3x10{sup -11} atm at 1223 K. Within the phase stability domain, the electronic transport properties are essentially p(O{sub 2})-independent. The steady-state oxygen permeability of dense LaSr{sub 2}Mn{sub 1.6}Ni{sub 0.4}O{sub 7-{delta}} membranes is higher than that of (La,Sr)MnO{sub 3-{delta}}, but lower if compared to perovskite-like (Sr,Ce)MnO{sub 3-{delta}}. Porous LaSr{sub 2}Mn{sub 1.6}Ni{sub 0.4}O{sub 7-{delta}} cathodes in contact with apatite-type La{sub 10}Si{sub 5}AlO{sub 26.5} solid electrolyte exhibit, however, a relatively poor electrochemical performance, partly associated with strong cation interdiffusion between the materials. - Graphical abstract: The substitution of manganese with nickel in Ruddlesden-Popper-type LaSr{sub 2}Mn{sub 2}O{sub 7-{delta}}, where the solubility limit corresponds to approximately 25% Mn sites, increases phase stability at elevated temperatures and thermal expansion, and decreases unit cell volume and total conductivity. The Seebeck coefficient and conductivity of LaSr{sub 2}Mn{sub 1.6}Ni{sub 0.4}O{sub 7-{delta}}, analyzed in the oxygen partial pressure range 10{sup -15}-0.3 atm at 600-1270 K, display that the electronic transport is n-type and occurs via a small polaron mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transparent conductive Al-doped ZnO thin films grown at room temperature

Aluminum-doped ZnO (ZnO:Al, AZO) thin films were prepared on glass substrates by dc reactive magnetron sputtering from a Zn-Al alloy target at room temperature. The effects of the Ar-to-O{sub 2} partial pressure ratios on the structural, electrical, and optical properties of AZO films were studied in detail. AZO films grown using 100:4 to 100:8 Ar-to-O{sub 2} ratio result in acceptable quality films with c-axis orientated crystals, uniform grains, 10{sup -3} {Omega} cm resistivity, greater than 10{sup 20} cm{sup -3} electron concentration, and high transmittance, 90%, in the visible region. The lowest resistivity of 4.11x10{sup -3} {Omega} cm was obtained under the Ar-to-O{sub 2} partial pressure ratio of 100:4. A relatively strong UV emission at {approx}3.26 eV was observed in the room-temperature photoluminescence spectrum. X-ray photoelectron spectroscopy analysis confirmed that Al was introduced into ZnO and substitutes for Zn and doped the film n-type.

36 MATERIALS SCIENCE↗

Effect of Nickel Substitution on Defect Chemistry, Electrical Properties, and Dimensional Stability of Calcium-Doped Yttrium Chromite

The effect of nickel substitution on defect chemistry, electrical properties, and dimensional stability of calcium-doped yttrium chromite was studied for use as an interconnect material in high temperature solid oxide fuel cells (SOFCs). The compositions of Y0.8Ca0.2Cr1-xNixO3±δ (x=0-0.15), prepared using the glycine nitrate process, showed single phase orthorhombic perovskite structures over a wide range of oxygen partial pressures (10^-17 atm ≤ pO2 ≤ 0.21 atm). X-ray diffraction (XRD) analysis indicated that most of the nickel ions replacing chromium ions are divalent and act as acceptor dopants, leading to a substantial increase in conductivity. In particular, the conductivity at 900 degree C in air increased from 10 S/cm to 34 S/cm with 15% nickel substitution, and an increase in charge carrier density was confirmed by Seebeck measurements. A point defect model was derived, and the relationship between electrical conductivity and oxygen partial pressure was successfully fitted into the proposed model. The defect modeling results indicated that nickel substitution improves the stability of calcium-doped yttrium chromite toward reduction and suppresses the oxygen vacancy formation, which results in significantly increased electrical conductivity in reducing environment. The electrical conductivity of Y0.8Ca0.2Cr0.85Ni0.15O3±δ at 900 degree C in reducing atmosphere (pO2=10^-17 atm) was 5.8 S/cm, which was more than an order of magnitude higher than that of Y0.8Ca0.2CrO3±δ (0.2 S/cm). Improved stability in reducing atmosphere was further confirmed by dilatometry measurements showing reduced isothermal "chemical" expansion, and the isothermal expansion in reducing atmosphere (pO2=10^-17 atm) at 900 degree C decreased from 0.07% for Y0.8Ca0.2CrO3±δ to 0.03% for Y0.8Ca0.2Cr0.85Ni0.15O3±δ. Based on these results, enhanced electrical performance and mechanical integrity is expected with nickel substitution on calcium-doped yttrium chromite in SOFC operating conditions.

30 DIRECT ENERGY CONVERSION↗

Characterization of carrier states in CuWO₄ thin-films at elevated temperatures using conductometric analysis

CuWO₄ thin-films were deposited by pulsed laser deposition onto an insulating substrate. The temperature dependence of the electronic conductivity of CuWO₄ thin-films was determined over 100–500 °C temperature range in a synthetic air atmosphere. Additionally, variations of conductivity at 300 °C and 500 °C have been measured for oxygen partial pressures (0.1 atm<p(O₂)<0.9 atm) in nitrogen. The apparent activation energy ΔE{sub a} for the electrical conduction has been estimated. The study of the temperature effect on the electron transport properties of CuWO₄ thin-films reveals the operation of two temperature-dependent oxygen states. The effect of varying oxygen concentration on the electronic properties is discussed in detail. The electrochemical nature of the operating oxygen states for 100–500 °C temperature range is deduced using a physicochemical model that relates electronic conductivity with oxygen partial pressure and temperature. - Graphical abstract: Formation of oxygen states in n-type semiconducting metal-oxides and its effect on the surface electrochemical potential and electron transport. Highlights: • The study of surface species in CuWO₄ thin-films was carried using conductometry. • The determination of the apparent activation energy of conduction with temperature is outlined. • Temperature and O₂ concentration effects on the oxygen states was established. • For the ranges of temperature studied, the identified operating oxygen states were O₂⁻ and O⁻.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen-dominated plasma, due to silane depletion, for microcrystalline silicon deposition

Plasma conditions for microcrystalline silicon deposition generally require a high flux of atomic hydrogen, relative to SiH{sub {alpha}=0{yields}3} radicals, on the growing film. The necessary dominant partial pressure of hydrogen in the plasma is conventionally obtained by hydrogen dilution of silane in the inlet flow. However, a hydrogen-dominated plasma environment can also be obtained due to plasma depletion of the silane in the gas mixture, even up to the limit of pure silane inlet flow, provided that the silane depletion is strong enough. At first sight, it may seem surprising that the composition of a strongly depleted pure silane plasma consists principally of molecular hydrogen, without significant contribution from the partial pressure of silane radicals. The aim here is to bring some physical insight by means of a zero-dimensional, analytical plasma chemistry model. The model is appropriate for uniform large-area showerhead reactors, as shown by comparison with a three-dimensional numerical simulations. The SiH{sub {alpha}} densities remain very low because of their rapid diffusion and surface reactivity, contributing to film growth which is the desired scenario for efficient silane utilization. Significant SiH{sub {alpha}} densities due to poor design of reactor and gas flow, on the other hand, would result in powder formation wasting silane. Conversely, hydrogen atoms are not deposited, but recombine on the film surface and reappear as molecular hydrogen in the plasma. Therefore, in the limit of extremely high silane depletion fraction (>99.9%), the silane density falls below the low SiH{sub {alpha}} densities, but only the H radical can eventually reach significant concentrations in the hydrogen-dominated plasma.

36 MATERIALS SCIENCE↗

ANALYTIC SOLUTION FOR SELF-REGULATED COLLECTIVE ESCAPE OF COSMIC RAYS FROM THEIR ACCELERATION SITES

Supernova remnants (SNRs), as the major contributors to the galactic cosmic rays (CRs), are believed to maintain an average CR spectrum by diffusive shock acceleration regardless of the way they release CRs into the interstellar medium (ISM). However, the interaction of the CRs with nearby gas clouds crucially depends on the release mechanism. We call into question two aspects of a popular paradigm of the CR injection into the ISM, according to which they passively and isotropically diffuse in the prescribed magnetic fluctuations as test particles. First, we treat the escaping CR and the Alfven waves excited by them on an equal footing. Second, we adopt field-aligned CR escape outside the source, where the waves become weak. An exact analytic self-similar solution for a CR ''cloud'' released by a dimmed accelerator strongly deviates from the test-particle result. The normalized CR partial pressure may be approximated as P(p,z,t)=2[|z|{sup 5/3}+z{sub dif}{sup 5/3}(p,t)]{sup -3/5} exp[-z{sup 2}/4D{sub ISM}(p)t], where p is the momentum of CR particle, and z is directed along the field. The core of the cloud expands as z{sub dif}{proportional_to}{radical}(D{sub NL}(p)t) and decays in time as p{proportional_to}2z{sup -1}{sub dif}(t). The diffusion coefficient D{sub NL} is strongly suppressed compared to its background ISM value D{sub ISM}: D{sub NL} {approx} D{sub ISM}exp (- {Pi}) << D{sub ISM} for sufficiently high field-line-integrated CR partial pressure, {Pi}. When {Pi} >> 1, the CRs drive Alfven waves efficiently enough to build a transport barrier (p Almost-Equal-To 2/ Divides z Divides -{sup p}edestal{sup )} that strongly reduces the leakage. The solution has a spectral break at p = p{sub br}, where p{sub br} satisfies the equation D{sub NL}(p{sub br}) {approx_equal} z {sup 2}/t.

79 ASTRONOMY AND ASTROPHYSICS↗

A determination of the oxygen non-stoichiometry of the oxygen storage materials LnBaMn{sub 2}O{sub 5+δ} (Ln=Gd, Pr)

The A-site ordered double-perovskite oxides, LnBaMn{sub 2}O{sub 5+δ} (Ln=Gd, Pr), were synthesized and investigated to understand the effect of A site cation substitution on the oxygen storage properties of these materials. The present results are compared with our previous data for YBaMn{sub 2}O{sub 5+δ}. The results clearly reveal that changing the Ln cation strongly influences the oxidation/reduction behavior of LnBaMn{sub 2}O{sub 5+δ}. Based on thermogravimetric analysis data, oxygen uptake begins at lower temperatures in both air and oxygen in compounds with Ln{sup 3+} ions larger than Y{sup 3+}. These oxides exhibit almost complete and reversible oxygen uptake/release between fully-reduced LnBaMn{sub 2}O{sub 5} and fully-oxidized LnBaMn{sub 2}O{sub 6} during changes of the oxygen partial pressure between air and 1.99% H{sub 2}/Ar. In addition, the oxygen non-stoichiometries of GdBaMn{sub 2}O{sub 5+δ} and PrBaMn{sub 2}O{sub 5+δ} were determined as a function of pO{sub 2} at 600, 650, 700 and 750 °C by Coulometric titration at near-equilibrium conditions. The results confirm that these materials have two distinct phases on oxidation/reduction with δ≈0, 0.5 and a third phase with a range of composition with an oxygen content (5+δ) approaching ~6. The stabilities of the LnBaMn{sub 2}O{sub 5+δ} phases extend over a wide range of oxygen partial pressures (∼10{sup −25}≤pO{sub 2} (atm)≤∼1) depending on temperature. Isothermal experiments show that the larger the Ln{sup 3+} cation the lower pO{sub 2} for phase conversion. At some temperatures and pO{sub 2} conditions, the LnBaMn{sub 2}O{sub 5+δ} compounds are unstable with respect to decomposition to BaMnO{sub 3−δ} and LnMnO{sub 3}. This instability is more apparent in Coulometric titration experiments than in thermogravimetric analysis. The Coulometric titration experiments are necessarily slow in order to achieve equilibrium oxygen compositions. - Graphical abstract: Structure of LnBaMn{sub 2}O{sub 5.5} and the variation of stoichiometry of GdBaMn{sub 2}O{sub 5+x} with −log(pO{sub 2}) Display Omitted - Highlights: • Determination of the oxygen non-stoichiometry of GdBaMn{sub 2}O{sub 5+δ} and PrBaMn{sub 2}O{sub 5+δ} as a function of pO{sub 2} and T. • Establishment of pO{sub 2} ranges of stability of O{sub 5} and O{sub 5.5} at 600 °C, 650 °C, 700 °C and 750 °C. • Investigation of the kinetic instability of LnBaMn{sub 2}O{sub 5+δ} (Ln=Gd, Pr) with respect to decomposition to BaMnO{sub 3−x} and LnMnO{sub 3} • Comparison of the thermodynamics of the oxidation of LnBaMnO{sub 5} (Ln=Y, Gd, Pr) as a function of the rare earth cation size.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mixed conductivity, structural and microstructural characterization of titania-doped yttria tetragonal zirconia polycrystalline/titania-doped yttria stabilized zirconia composite anode matrices

Taking advantage of the fact that TiO{sub 2} additions to 8YSZ cause not only the formation of a titania-doped YSZ solid solution but also a titania-doped YTZP solid solution, composite materials based on both solutions were prepared by solid state reaction. In particular, additions of 15 mol% of TiO{sub 2} give rise to composite materials constituted by 0.51 mol fraction titania-doped yttria tetragonal zirconia polycrystalline and 0.49 mol fraction titania-doped yttria stabilized zirconia (0.51TiYTZP/0.49TiYSZ). Furthermore, Y{sub 2}(Ti{sub 1-y}Zr{sub y}){sub 2}O{sub 7} pyrochlore is present as an impurity phase with y close to 1, according to FT-Raman results. Lower and higher additions of titania than that of 15 mol%, i.e., x=0, 5, 10, 20, 25 and 30 mol% were considered to study the evolution of 8YSZ phase as a function of the TiO{sub 2} content. Furthermore, zirconium titanate phase (ZrTiO{sub 4}) is detected when the titania content is equal or higher than 20 mol% and this phase admits Y{sub 2}O{sub 3} in solid solution according to FE-SEM-EDX. The 0.51TiYTZP/0.49TiYSZ duplex material was selected in this study to establish the mechanism of its electronic conduction under low oxygen partial pressures. In the pO{sub 2} range from 0.21 to 10{sup -7.5} atm. the conductivity is predominantly ionic and constant over the range and its value is 0.01 S/cm. The ionic plus electronic conductivity is 0.02 S/cm at 1000 {sup o}C and 10{sup -12.3} atm. Furthermore, the onset of electronic conductivity under reducing conditions exhibits a -1/4 pO{sub 2} dependence. Therefore, it is concluded that the n-type electronic conduction in the duplex material can be due to a small polaron-hopping between Ti{sup 3+} and Ti{sup 4+}. -- Graphical abstract: FE-SEM micrograph of a polished and thermal etched surface of a Ti-doped YTZP/Ti-doped YSZ composite material. Display Omitted Research highlights: {yields} Ti-doped YTZP/Ti-doped YSZ composite materials are mixed conductors under low partial pressures. {yields} From 5 mol% of TiO{sub 2}, Y{sub 2}(Ti{sub 1-y},Zr{sub y}){sub 2}O{sub 7} pyrochlore is present as a minor phase, being y close to 1 according to FT-Raman studies. {yields} The onset of the electronic conductivity under reducing conditions exhibit a -1/4 pO{sub 2} dependence. The n-type electronic conduction is due to a small polaron-hopping between Ti{sup 3+} and Ti{sup 4+}.

36 MATERIALS SCIENCE↗

TGA Study of the Reaction Kinetics of a CuFeMnAlO 4+δ Oxygen Carrier for Methane Chemical Looping Combustion under High Pressure and Atmospheric Pressure Conditions

Reduction and oxidation kinetics of a CuFeMnAlO 4+δ oxygen carrier for methane were studied using an atmospheric thermogravimetric analyzer (TGA) and a pressurized TGA. Important parameters such as temperature (500–900 °C), particle size distribution (150–650 μm), and partial pressures of reactants (methane and oxygen) were evaluated. Results showed that the reduction of the oxygen carrier was not affected by particle size distribution studied in this work, and that above 750 °C, the effect of the temperature on oxygen carrier reduction started to diminish. The reaction time approaches an asymptotic limit as methane partial pressure increases. For oxygen carrier oxidation, it was found that the rate of oxidation increased with increasing oxygen concentration. The effect of the oxygen concentration was more noticeable when the oxygen concentration was below 7.5%. Because of the inherent feature of the oxygen carrier, its chemical looping with oxygen uncoupling property was also assessed. A phase boundary-controlled shrinking sphere model was used to model the test data from the TGAs. Modeling results showed that the oxygen carrier reduction had a reaction order of 1 with an activation energy of ∼46 kJ/mol. Oxygen carrier oxidation demonstrated a reaction order of 1.1 with an activation energy of ∼55 kJ/mol. Additionally, the differences of the experimental results between the atmospheric pressure TGA and the pressurized TGA were discussed in detail and the limitations of the pressurized TGA were highlighted.

Hydrocarbons↗

Thermodynamic restrictions on mechanosynthesis of strontium titanate

Chemical potential phase stability diagrams were calculated from relevant thermodynamic properties and used to predict the thermodynamic driving force under prospective conditions of room temperature mechanosynthesis. One analysed the dependence of chemical potential diagrams on temperature and partial pressure of evolving gases such as oxygen or carbon dioxide, as expected on using strontium peroxide or strontium carbonate as precursor reactants for the alkali earth component. Thermodynamic calculations were also obtained for changes in titania precursor reactants, including thermodynamic predictions for reactivity of strontium carbonate with amorphous titania. Experimental evidence showed that strontium titanate can be obtained by mechanosynthesis of strontium carbonate+anatase mixtures, due to previous amorphization under high energy milling. Ability to perform mechanosynthesis with less energetic milling depends on the suitable choice of alternative precursor reactants, which meet the thermodynamic requirements without previous amorphization; this was demonstrated by mechanosynthesis from anatase+strontium peroxide mixtures. - Graphical abstract: X-Ray diffractograms of the starting TiO{sub 2} (anatase)+SrCO{sub 3} mixture and after mechanical activation at 650 rpm, for 1, 2, and 7 h. Different symbols are used to identify reflections ascribed to anatase (diamonds), SrCO{sub 3} (squares) and SrTiO{sub 3} (triangles). Highlights: Black-Right-Pointing-Pointer Prediction of thermodynamic driving force for room temperature mechanosynthesis. Black-Right-Pointing-Pointer Dependence of chemical potential diagrams on temperature and partial pressure. Black-Right-Pointing-Pointer Thermodynamic calculations for changes in titania precursor. Black-Right-Pointing-Pointer Experimental support for thermodynamic predictions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗