Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OPTOELECTRONIC DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Characteristics of InGaAsBi with various lattice mismatches on InP substrate

To develop bismuth-containing infrared optoelectronic devices, InGaAsBi/InP films with different lattice mismatches have been investigated. The lattice mismatch was tailored by changing the Bi content in conjunction with the In content simultaneously. X-ray diffraction analysis revealed that alloy lattice constants have been extended positively by incorporation of Bi into the crystal lattice. Electrical and optical characteristics were investigated by Hall-effect, optical absorption and photoluminescence measurements. A bandgap shrinking of about 56.4 meV/Bi% was deduced by X-ray diffraction and optical absorption measurements. From the excitation dependent photoluminescence measurement at 10 K, the donor-acceptor pair emissions were inferred for samples containing moderate and high levels of Bi. The temperature dependence of the PL peak energy is as small as 0.06 meV/K in In{sub 0.5}Ga{sub 0.5}As{sub 0.987}Bi{sub 0.013}, which is fairly low compared with that of In{sub 0.5}Ga{sub 0.5}As.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Annealing induced microstructure engineering of antimony tri-selenide thin films

Highlights: • Deposition of Sb{sub 2}Se{sub 3} thin films using thermal vapour deposition. • Films are deposited on substrates with concurrent heating and without heating. • Effect of post deposition annealing on the two types of films are investigated. • Influence of temperature and processing conditions on optical band gap are probed. • This Sb{sub 2}Se{sub 3} films can find application in solar cells and optoelectronic devices. - Abstract: The presented work demonstrates the effect of annealing on the structural, surface morphology and optical properties of Antimony Triselenide (Sb{sub 2}Se{sub 3}) thin films deposited by thermal evaporation. Two sets of thin films of Sb{sub 2}Se{sub 3} were grown on soda lime glass (SLG) substrates by thermal evaporation with and without substrate heating. Both sets of films were then annealed at three distinct temperatures (100 °C, 200 °C and 300 °C) to study the effects of annealing on the microstructure. Analysis using XRD (X-Ray Diffraction) characterization revealed that the as-deposited films without substrate heating exhibit an amorphous nature, whereas the films grown with concurrent substrate heating are polycrystalline with orthorhombic structure. The films annealed at high temperature with concurrent substrate heating possess smooth and continuous grain morphologies. The effect of annealing was also found to have significant impact on the band gap and optical properties of the Sb{sub 2}Se{sub 3} thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Environmental stability of high-mobility indium-oxide based transparent electrodes

Large-scale deployment of a wide range of optoelectronic devices, including solar cells, critically depends on the long-term stability of their front electrodes. Here, we investigate the performance of Sn-doped In{sub 2}O{sub 3} (ITO), H-doped In{sub 2}O{sub 3} (IO:H), and Zn-doped In{sub 2}O{sub 3} (IZO) electrodes under damp heat (DH) conditions (85 °C, 85% relative humidity). ITO, IO:H capped with ITO, and IZO show high stability with only 3%, 9%, and 13% sheet resistance (R{sub s}) degradation after 1000 h of DH, respectively. For uncapped IO:H, we find a 75% R{sub s} degradation, due to losses in electron Hall mobility (μ{sub Hall}). We propose that this degradation results from chemisorbed OH- or H{sub 2}O-related species in the film, which is confirmed by thermal desorption spectroscopy and x-ray photoelectron spectroscopy. While μ{sub Hall} strongly degrades during DH, the optical mobility (μ{sub optical}) remains unchanged, indicating that the degradation mainly occurs at grain boundaries.

36 MATERIALS SCIENCE↗

Toxicity evaluation of ZnO nanostructures on L929 fibroblast cell line using MTS assay

ZnO has wide applications in medical and dentistry apart from being used as optoelectronic devices such as solar cells, photodetectors, sensors and light emitting diodes (LEDs). Therefore, the toxicity evaluation is important to know the toxicity level on normal cell line. The toxicity of two grades ZnO nanostructures, ZnO-4 and ZnO-8 have been carried out using cytotoxicity test of MTS assay on L929 rat fibroblast cell line. Prior to that, ZnO-4 and ZnO-8 were characterized for its morphology, structure and optical properties using FESEM, X-ray diffraction, and Photoluminescence respectively. The two groups revealed difference in morphology and exhibit slightly shifted of near band edge emission of Photoluminescence other than having a similar calculated crystallite size of nanostructures. The viability of cells after 72h were obtained and the statistical significance value was calculated using SPSS v20. The p value is more than 0.05 between untreated and treated cell with ZnO. This insignificant value of p>0.05 can be summarized as a non-toxic level of ZnO-4 and ZnO-8 on the L929 cell line.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Semiconducting ZnSnN{sub 2} thin films for Si/ZnSnN{sub 2} p-n junctions

ZnSnN{sub 2} is regarded as a promising photovoltaic absorber candidate due to earth-abundance, non-toxicity, and high absorption coefficient. However, it is still a great challenge to synthesize ZnSnN{sub 2} films with a low electron concentration, in order to promote the applications of ZnSnN{sub 2} as the core active layer in optoelectronic devices. In this work, polycrystalline and high resistance ZnSnN{sub 2} films were fabricated by magnetron sputtering technique, then semiconducting films were achieved after post-annealing, and finally Si/ZnSnN{sub 2} p-n junctions were constructed. The electron concentration and Hall mobility were enhanced from 2.77 × 10{sup 17} to 6.78 × 10{sup 17 }cm{sup −3} and from 0.37 to 2.07 cm{sup 2} V{sup −1} s{sup −1}, corresponding to the annealing temperature from 200 to 350 °C. After annealing at 300 °C, the p-n junction exhibited the optimum rectifying characteristics, with a forward-to-reverse ratio over 10{sup 3}. The achievement of this ZnSnN{sub 2}-based p-n junction makes an opening step forward to realize the practical application of the ZnSnN{sub 2} material. In addition, the nonideal behaviors of the p-n junctions under both positive and negative voltages are discussed, in hope of suggesting some ideas to further improve the rectifying characteristics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Observation of natural superlattice in Al{sub X}Ga{sub 1-X}As layers grown by metalorganic vapor phase epitaxy

Atomic Cu-Pt type ordering in monolayer scale is well known in Ga{sub 0.5} In{sub 0.5} P epitaxial layers leading to change in its bandgap. Despite wide scale use of Al{sub x}Ga{sub 1-x}As (0<x<0.7) in various optoelectronic devices and quantum well structures, spontaneous ordering in this system was not well studied beyond monolayer scale. In this work, we report observation of natural superlattice ordering due to compositional variation in MOVPE grown Al{sub x}Ga{sub 1-x}As epitaxial layers. Clear evidence of such ordering was first noticed in the barrier layers of GaAs/Al{sub 0.3}Ga{sub 0.7}As quantum well structures. Further investigation on bulk epitaxial growth of Al{sub x}Ga{sub 1-x}As layer with different composition (x=0.2) has also confirmed existence of such structures. We have probed the sample using high resolution Transmission Electron Microscopy coupled with x-ray rocking curve (XRC) and reflectivity (XRR) measurements. Sharp superlattice peaks around (004) substrate Bragg peak as well as around (002) forbidden peak in XRC have been observed. Similar peaks are present in XRR also. We have presented detailed analysis of X-ray diffraction data with the help of kinematical diffraction theory here. The stability of the superlattice structures has been further investigated by annealing the sample at different temperatures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hole mobility modulation of solution-processed nickel oxide thin-film transistor based on high-k dielectric

Solution-processed p-type oxide semiconductors have recently attracted increasing interests for the applications in low-cost optoelectronic devices and low-power consumption complementary metal-oxide-semiconductor circuits. In this work, p-type nickel oxide (NiO{sub x}) thin films were prepared using low-temperature solution process and integrated as the channel layer in thin-film transistors (TFTs). The electrical properties of NiO{sub x} TFTs, together with the characteristics of NiO{sub x} thin films, were systematically investigated as a function of annealing temperature. By introducing aqueous high-k aluminum oxide (Al{sub 2}O{sub 3}) gate dielectric, the electrical performance of NiO{sub x} TFT was improved significantly compared with those based on SiO{sub 2} dielectric. Particularly, the hole mobility was found to be 60 times enhancement, quantitatively from 0.07 to 4.4 cm{sup 2}/V s, which is mainly beneficial from the high areal capacitance of the Al{sub 2}O{sub 3} dielectric and high-quality NiO{sub x}/Al{sub 2}O{sub 3} interface. This simple solution-based method for producing p-type oxide TFTs is promising for next-generation oxide-based electronic applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

GaAs/Ge crystals grown on Si substrates patterned down to the micron scale

Monolithic integration of III-V compounds into high density Si integrated circuits is a key technological challenge for the next generation of optoelectronic devices. In this work, we report on the metal organic vapor phase epitaxy growth of strain-free GaAs crystals on Si substrates patterned down to the micron scale. The differences in thermal expansion coefficient and lattice parameter are adapted by a 2-μm-thick intermediate Ge layer grown by low-energy plasma enhanced chemical vapor deposition. The GaAs crystals evolve during growth towards a pyramidal shape, with lateral facets composed of (111) planes and an apex formed by (137) and (001) surfaces. The influence of the anisotropic GaAs growth kinetics on the final morphology is highlighted by means of scanning and transmission electron microscopy measurements. The effect of the Si pattern geometry, substrate orientation, and crystal aspect ratio on the GaAs structural properties was investigated by means of high resolution X-ray diffraction. The thermal strain relaxation process of GaAs crystals with different aspect ratio is discussed within the framework of linear elasticity theory by Finite Element Method simulations based on realistic geometries extracted from cross-sectional scanning electron microscopy images.

36 MATERIALS SCIENCE↗

Design of graphene-based hybrid waveguides for nonlinear applications

The extraordinary properties of a monolayer graphene can be effectively utilized in integrated optoelectronic devices. Therefore, the optical properties and the effective parameters on the graphene’s conductivity are calculated at the telecom wavelength 1.55 µm. Next, the different types of photonic and plasmonic hybrid waveguides based on graphene are designed for nonlinear applications such as frequency conversion processes. The fundamental proposed structure consists of a LiNbO{sub 3} layer, a single graphene layer and a dielectric gap between the graphene and LiNbO{sub 3} to support the nonlinear applications such as second harmonic generation. The waveguide’s performance is analyzed in terms of the intensity of electric field, LiNbO{sub 3} thickness, the gap refractive index, mode effective index and propagation loss while the graphene’s chemical potential is varied with an applied gate voltage. According to the results, a sudden rise in propagation loss at µ{sub c} = 0.493 eV (where the permittivity of graphene is almost zero) is observed. At last, a plasmonic hybrid waveguide consisting of a silver strip and a graphene layer placed between the metal and LiNbO{sub 3} layer is presented and the effect of the graphene’s chemical potential on the mode effective index and the propagation length are studied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Review of radiation-induced defects in GaAs

Radiation-resilient optoelectronic materials are highly desired in space and nuclear applications, and understanding the relevant defects and electronic processes in those materials is crucial for both current and next-generation applications. GaAs is a prototypical semiconductor that serves as a foundational system for describing and understanding optoelectronic devices. In this review, both experimental studies and molecular dynamics (MD) simulations of irradiated GaAs are reviewed, with particular emphasis on the deep-level transient spectroscopy, irradiation-induced amorphization zones, and MD predictions of damage structures. The MD results are also compared to predictions of the non-ionized energy-loss model. Recent theoretical studies, in particular, density functional theory based calculations on the simple intrinsic defects and defect clusters in GaAs, are also reviewed. These defects have an important role in dictating the evolution of GaAs in radiation damage environments, as they impact the coupled dynamics of charge carriers. Finally, possible gaps and challenges toward the general understanding of defect evolution in GaAs are discussed.

36 MATERIALS SCIENCE↗

Spectroscopic studies of Sm3+ ions doped alkaline-earth chloro borate glasses for visible photonic applications

Highlights: • AECB glasses doped with Sm{sup 3+} ions were synthesized by melt quenching technique. • Bonding parameters reveal bonding nature between Sm-Oxygen as ionic. • Energy transfer leads to shrink in experimental decay times of Sm{sup 3+} ions. • AECB{sub 0}.5Sm glass is apt for designing reddish orange optoelectronic devices. - Abstract: A new series of Sm{sup 3+} ions doped Alkaline-Earth Chloro Borate (AECB) glasses with compositions (25-x)CaO-5SrO-10BaCl{sub 2}-60B{sub 2}O{sub 3}-xSm{sub 2}O{sub 3} (x = 0.1 mol%–2.5 mol%) were prepared by a conventional melt quenching technique and characterized with XRD, absorption, excitation, photoluminescence (PL) and fluorescence decay spectral measurements. From the absorption spectra, Judd-Ofelt (J-O) intensity parameters (Ω{sub 2}, Ω{sub 4}, Ω{sub 6}) have been measured. The PL spectra under 402 nm excitation show bright reddish-orange emission at 602 nm. The decay spectral profiles of {sup 4}G{sub 5/2} → {sup 6}H{sub 7/2} (602 nm) luminescence transition used to measure experimental lifetimes (τ{sub R}). The Inokuti-Hirayama model used to understand the predominant energy transfer mechanism involved in the prepared glasses. The evaluated emission cross-sections (σ{sub se}), branching ratios (β{sub R}) and quantum efficiency (η) allows us to contemplate that the Sm{sup 3+} ions doped AECB glasses are aptly suitable as potential gain mediums for visible reddish orange lasers pumped directly by commercially available 405 nm laser diodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of heterovalent doping on tetrahedral N interstitial formation in dilute GaAsN alloys

Dilute alloying of GaAs with N enables bandgap tuning for near-infrared to mid-infrared optoelectronic devices. However, non-substitutional N incorporation has been linked to lower absorption and emission efficiencies in dilute-nitride-alloy-based devices, especially in those containing heterovalent dopants. Here, in this work, we examine the influence of heterovalent dopants on N incorporation mechanisms in dilute GaAs 1−x N x alloys with N composition intentionally below the threshold composition for the formation of tetrahedral N interstitials (N tetra ) in undoped GaAs 1−x N x . For undoped GaAs 1−x N x , 20% of the N incorporates in non-substitutional sites, as (N-N) As and (N-As) split interstitials. Interestingly, Si dopants induce the formation of N tetra , while Be doping has a negligible effect on the interstitial type. Although elastic interactions due to opposite signs of the misfit volumes of N tetra and N As contribute to N tetra incorporation above a threshold N composition, Si dopants reduce the threshold composition, due to the Fermi level-dependent stability of N tetra .

36 MATERIALS SCIENCE↗

Energy barriers for Dy and H penetrating graphene on 6 H -SiC(0001) and freestanding bilayer graphene from first-principles calculations

Currently, intercalation of foreign guest atoms into two-dimensional (2D) layered van der Waals materials is an active research area motivated in part by the development of next-generation energy-storage technologies and optoelectronic devices. One such extensively studied 2D material is the graphene-on-SiC system. To realize and control the desired intercalated structures, it is fundamentally important to understand the kinetic process of intercalation. For the intercalation of a guest atom into graphene layers on SiC substrate, a critical kinetic parameter is the energy barrier of a guest atom penetrating the perfect graphene top layer into the gallery under it. However, accurate theoretical calculations for such penetration barriers are unavailable in literature. From our first-principles density functional theory calculations, we obtain the global energy barriers of 3.47 and 1.80 eV for single Dy and H atoms penetrating the graphene top layer on a graphene buffer layer supported by a Si-terminated 6H-SiC(0001) substrate, respectively. Furthermore, for comparison as well as for examining the lateral strain effects, we also obtain the global barriers of 5.05 and 1.50 eV for single Dy and H atoms penetrating freestanding bilayer graphene with a tensile strain of about 8.8% to match our model for supported graphene, as well as the global barriers of 7.21 and 4.18 eV for penetrating unstrained freestanding bilayer graphene, respectively. From corresponding minimum energy paths with multiple energy minima and saddle points, we can also obtain various local energy barriers and the global backward barrier from the graphene gallery back to the top surface.

2D materials↗

Selective Laser-Assisted Synthesis of Tubular van der Waals Heterostructures of Single-Layered PbI{sub 2} within Carbon Nanotubes Exhibiting Carrier Photogeneration

The electronic and optical properties of two-dimensional layered materials allow the miniaturization of nanoelectronic and optoelectronic devices in a competitive manner. Even larger opportunities arise when two or more layers of different materials are combined. Here, we report on an ultrafast energy efficient strategy, using laser irradiation, which allows bulk synthesis of crystalline single-layered lead iodide in the cavities of carbon nanotubes by forming cylindrical van der Waals heterostructures. In contrast to the filling of van der Waals solids into carbon nanotubes by conventional thermal annealing, which favors the formation of inorganic nanowires, the present strategy is highly selective toward the growth of monolayers forming lead iodide nanotubes. The irradiated bulk material bearing the nanotubes reveals a decrease of the resistivity as well as a significant increase in the current flow upon illumination. Both effects are attributed to the presence of single-walled lead iodide nanotubes in the cavities of carbon nanotubes, which dominate the properties of the whole matrix. The present study brings in a simple, ultrafast and energy efficient strategy for the tailored synthesis of rolled-up single-layers of lead iodide (i.e., single-walled PbI{sub 2} nanotubes), which we believe could be expanded to other two-dimensional (2D) van der Waals solids. In fact, initial tests with ZnI{sub 2} already reveal the formation of single-walled ZnI{sub 2} nanotubes, thus proving the versatility of the approach.

60 APPLIED LIFE SCIENCES↗

Edge effects on band gap energy in bilayer 2H-MoS{sub 2} under uniaxial strain

The potential of ultrathin MoS{sub 2} nanostructures for applications in electronic and optoelectronic devices requires a fundamental understanding in their electronic structure as a function of strain. Previous experimental and theoretical studies assume that an identical strain and/or stress state is always maintained in the top and bottom layers of a bilayer MoS{sub 2} film. In this study, a bilayer MoS{sub 2} supercell is constructed differently from the prototypical unit cell in order to investigate the layer-dependent electronic band gap energy in a bilayer MoS{sub 2} film under uniaxial mechanical deformations. The supercell contains an MoS{sub 2} bottom layer and a relatively narrower top layer (nanoribbon with free edges) as a simplified model to simulate the as-grown bilayer MoS{sub 2} flakes with free edges observed experimentally. Our results show that the two layers have different band gap energies under a tensile uniaxial strain, although they remain mutually interacting by van der Waals interactions. The deviation in their band gap energies grows from 0 to 0.42 eV as the uniaxial strain increases from 0% to 6% under both uniaxial strain and stress conditions. The deviation, however, disappears if a compressive uniaxial strain is applied. These results demonstrate that tensile uniaxial strains applied to bilayer MoS{sub 2} films can result in distinct band gap energies in the bilayer structures. Such variations need to be accounted for when analyzing strain effects on electronic properties of bilayer or multilayered 2D materials using experimental methods or in continuum models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First principles study of structural, optoelectronic and thermoelectric properties of Cu{sub 2}CdSnX{sub 4} (X = S, Se, Te) chalcogenides

Highlights: • Copper based quaternary chalcogenides are important for optoelectronic devices. • The WC-GGA shows that the materials are metallic in nature. • The EV-GGA predicts better band gaps compared to WC-GGA. • Absorption peaks are high in the visible and ultraviolet energy regions. • All the semiconductors have figure of merit above 0.70. - Abstract: In this work, structural, electronic, optical and thermoelectric properties of Cu{sub 2}CdSnX{sub 4} (X = S, Se, Te) have been studied through the full potential linearized augmented plane wave method. Calculated ground state lattice parameters are in good agreement with the experimental results. Lattice constant and bulk moduli vary inversely by replacing the anion X from S to Te in Cu{sub 2}CdSnX{sub 4}. The WC-GGA shows that the materials are metallic in nature. The EV-GGA predicts better band gaps compared to WC-GGA. The calculated bandgap values are 1.8, 1.06 and 0.8042 for Cu{sub 2}CdSnX{sub 4}, Cu{sub 2}CdSnX{sub 4}, Cu{sub 2}CdSnX{sub 4} respectively. Cd-d, Sn-s and X-p states contribute significantly in the density of states of the compounds. Absorption peaks and optical conductivity is high in the visible and ultraviolet energy regions. All the semiconductors have figure of merit above 0.70. The optical and thermoelectric properties clearly show that Cu{sub 2}CdSnX{sub 4} are potential candidates in the fields of solar cell and thermoelectric technology.

36 MATERIALS SCIENCE↗

Influence of Annealing and Composition on the Crystal Structure of Mixed-Halide, Ruddlesden–Popper Perovskites

Mixed-halide two-dimensional (2D) hybrid organic–inorganic perovskites offer an important opportunity to control the band gap for applications in optoelectronic devices. In this study, we focus on phenethylammonium lead halide [(PEA) 2 Pb(I 1– x Br x ) 4 ] films, the pure iodide form of which is one of the most widely studied optically active 2D perovskite systems. Resonant infrared, matrix-assisted pulsed laser evaporation is used to grow films to explore the effects of post-growth annealing and mixed-halide composition. The composition, crystal structure, and optical properties are studied for as-grown and annealed films of (PEA) 2 Pb(I 1– x Br x ) 4 for x = 0, 0.25, 0.5, 0.75, and 1. First-principles calculations are used in conjunction with the experimental data to explain the mixed-halide behavior that does not trend monotonically with the bromide content. Important results of this work are as follows: (i) X-ray diffraction reveals evidence for halide phase separation around x = 0.25, consistent with first-principles calculations, whereas no phase separation is observed for x = 0.5 and above and (ii) a unique photoluminescence (PL) peak splitting is observed for x = 0.75, a composition for which no compositional phase separation is observed. The PL splitting is tentatively explained by the coexistence of two distinct types of halide short-range ordering at x = 0.75. Overall, this study demonstrates that mixed-halide n = 1 Ruddlesden–Popper perovskites are not simple random alloys but that instead, they display distinct sites and ordering preferences of the different halide anions. These preferences are critical to understand and rationally tune the properties of the materials.

36 MATERIALS SCIENCE↗

High Photoluminescence Quantum Yield in Band Gap Tunable Bromide Containing Mixed Halide Perovskites

Hybrid organic-inorganic halide perovskite based semiconductor materials are attractive for use in a wide range of optoelectronic devices because they combine the advantages of suitable optoelectronic attributes and simultaneously low-cost solution processability. Here, we present a two-step low-pressure vapor-assisted solution process to grow high quality homogeneous CH 3 NH 3 PbI 3-x Br x perovskite films over the full band gap range of 1.6-2.3 eV. Photoluminescence light-in versus light-out characterization techniques are used to provide new insights into the optoelectronic properties of Br-containing hybrid organic-inorganic perovskites as a function of optical carrier injection by employing pump-powers over a 6 orders of magnitude dynamic range. The internal luminescence quantum yield of wide band gap perovskites reaches impressive values up to 30%. This high quantum yield translates into substantial quasi-Fermi level splitting and high "luminescence or optically implied" open-circuit voltage. Most importantly, both attributes, high internal quantum yield and high optically implied open-circuit voltage, are demonstrated over the entire band gap range (1.6 eV ≤ E g ≤ 2.3 eV). These results establish the versatility of Br-containing perovskite semiconductors for a variety of applications and especially for the use as high-quality top cell in tandem photovoltaic devices in combination with industry dominant Si bottom cells. (Figure Presented).

36 MATERIALS SCIENCE↗