Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OMIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Effect of high hydrostatic pressure on structural stability of Ti{sub 3}GeC{sub 2}: A first-principles investigation

An investigation into the structural stability, electronic and elastic properties of Ti{sub 3}GeC{sub 2} under high hydrostatic pressure was conducted using first-principles calculations based on density functional theory (DFT). From the energy and enthalpy calculations, and the variations of elastic constants with pressure, we conclude that {alpha}-Ti{sub 3}GeC{sub 2} is most stable upon compression to 100 GPa, which is not consistent with the nonhydrostatic in situ synchrotron X-ray diffraction studies. The higher structural stability was analyzed in terms of electronic level. The absence of band gap at the Fermi level and the finite value of the density of states at the Fermi energy reveal the metallic behavior of all polymorphs of Ti{sub 3}GeC{sub 2}. -- Graphical abstract: The less phase stability of {beta}-Ti{sub 3} SiC{sub 2} compared to that of {alpha}-Ti{sub 3} SiC{sub 2} can be interpreted by the states between -6.0 and 3.6 eV shift toward the higher energy region for {beta}-Ti{sub 3} SiC{sub 2} Display Omitted Research highlights: > From the energy and enthalpy calculations of polymorphs for Ti{sub 3}GeC{sub 2}, we can conclude that Ti{sub 3}GeC{sub 2} possessed higher stable structural stability under pressure to 100 GPa, which is not consistent with the nonhydrostatic experiments. > The higher stable structure of Ti{sub 3}GeC{sub 2} is testified by the calculated variations of elastic constants with pressure. > The reasons for this higher stable phase stability were discussed in terms of the electronic level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compositionally controlled metal-insulator transition in Tl{sub 2-x}In{sub x}TeO{sub 6}

Tl{sub 2}TeO{sub 6} and In{sub 2}TeO{sub 6} are both known to crystallize in the Na{sub 2}SiF{sub 6}-type structure. We find Tl{sub 2}TeO{sub 6} is metallic, whereas In{sub 2}TeO{sub 6} is an insulator. We have prepared a complete Tl{sub 2-x}In{sub x}TeO{sub 6} series in a search for a compositionally controlled metal-insulator transition that might be expected if a complete solid solution can be obtained. Unit cell edges and volume vary monotonically with no indication of a miscibility gap. The metal-insulator transition occurs at an x value of about 1.4, which can be rationalized on a percolation model. No superconductivity could be detected down to 5 K. -- Graphical abstract: A complete solid solution between Tl{sub 2}TeO{sub 6} and In{sub 2}TeO{sub 6} is formed. A compositionally controlled metal-insulator transition occurs in Tl{sub 2-x}In{sub x}TeO{sub 6} at an x value of about 1.5. No superconductivity could be detected down to 5 K. Display Omitted Research highlights: {yields} A complete solid solution between Tl{sub 2}TeO{sub 6} and In{sub 2}TeO{sub 6} is formed. {yields} A compositionally controlled metal-insulator transition occurs in Tl{sub 2-x}In{sub x}TeO{sub 6} at an x value of about 1.5, which can be rationalized on a percolation model. {yields} No superconductivity could be detected down to 5 K.

36 MATERIALS SCIENCE↗

Structural, optoelectronic, infrared and Raman spectra of orthorhombic SrSnO{sub 3} from DFT calculations

Orthorhombic SrSnO{sub 3} was investigated using density functional theory (DFT) considering both the local density and generalized gradient approximations, LDA and GGA, respectively. The electronic band structure, density of states, complex dielectric function, optical absorption, and the infrared and Raman spectra were computed. Calculated lattice parameters are close to the experimental measurements, and an indirect band gap E(S{yields}{Gamma})=1.97eV (2.27 eV) was obtained within the GGA (LDA) level of calculation. Effective masses for holes and electrons were estimated, being very anisotropic in comparison with similar results for orthorhombic CaSnO{sub 3}. The complex dielectric function and the optical absorption of SrSnO{sub 3} were shown to be sensitive to the plane of polarization of the incident light. The infrared spectrum between 100 and 600 cm{sup -1} was obtained, with its main peaks being assigned, and a nice agreement between experimental and theoretical peaks of the Raman spectrum of orthorhombic SrSnO{sub 3} was achieved. -- Graphical abstract: Orthorhombic SrSnO{sub 3}: a view of the unit cell (left) and plots showing the calculated and experimental Raman spectra (right). Display Omitted Research highlights: {yields} We have performed DFT calculations on orthorhombic SrSnO{sub 3} crystals, obtaining their structural, electronical and optical properties. {yields} An indirect band gap was obtained, and anisotropic effective masses were found for both electrons and holes. {yields} The complex dielectric function and the optical absorption of SrSnO{sub 3} were shown to be very sensitive to the plane of polarization of the incident light. {yields} The infrared spectrum between 100 and 600 cm{sup -1} was obtained, with its main peaks being assigned, and a nice agreement between experimental and theoretical peaks of the Raman spectrum was achieved.

36 MATERIALS SCIENCE↗

Microstructure and magnetic properties of electrospun one-dimensional Al{sup 3+}-substituted SrFe{sub 12}O{sub 19} nanofibers

SrAl{sub x}Fe{sub 12-x}O{sub 19} (x=0-3.0) nanofibers with diameters about 100 nm have been prepared by electrospinning and subsequent heat treatment. With Al{sup 3+} ion content ranging from 0 to 3.0, the lattice parameters decrease due to Fe{sup 3+} ions substituted by smaller Al{sup 3+} ions and the average grain size calculated by the Scherrer's equation reduces from 65 to 37 nm. The magnetization shows a continuous reduction with the Al content and its value measured at 77 K is higher than at room temperature, which can be explained by Bloch's law. For the coercivity, its value initially increases, reaching a maximum value of 617 (298 K) and 547 kA m{sup -1} (77 K) at x=2.0, and then reduces with the Al content further increase largely arising from the substituted Al{sup 3+} ion arrangement in different interstitial sites of the strontium ferrite unit cell. -- Graphical abstract: Al{sup 3+} ions substituted strontium ferrite nanofibers have been prepared by the electrospinning with a diameter of about 100 nm and the Al{sup 3+} ion substitution has a great effect on the microstructure and magnetic property of SrAl{sub x}Fe{sub 12-x}O{sub 19} nanofibers. Display Omitted Research highlights: {yields} SrAl{sub x}Fe{sub 12-x}O{sub 19} nanofibers have been fabricated by the electrospinning. {yields} There is a relation between the Al{sup 3+} ions substitution and microstructure. {yields} The magnetic property can be tuned effectively by Al{sup 3+} ion substitution. {yields} The magnetic property is influenced by measurement temperature.

36 MATERIALS SCIENCE↗

Crystal structure of Ba{sub 2}InTaO{sub 6} as determined by the Rietveld refinement

Rietveld profile analysis of X-ray diffraction data was carried out to determine the symmetry and crystal structures of the double perovskite Ba{sub 2}InTaO{sub 6}. Contrary to a recent study of Raman spectroscopy, we find no evidence that Ba{sub 2}InTaO{sub 6} adopts the tetragonal space group P4/mnc of the tilt system a{sup 0}a{sup 0}c{sup +}. Instead, it has cubic symmetry with the space group Fm3-bar m in the temperature range 82-723 K. In Ba{sub 2}InTaO{sub 6} the ordering between In(III) and Ta(V) cations is a difficult process requiring prolonged heat treatment at high temperature. -- Graphical abstract: Enlarged sections of the X-ray diffraction pattern of Ba{sub 2}InTaO{sub 6} showing the basic (222) and (400) reflections. Insert shows the evolution of these reflections as function of temperature. No peak splitting is observed in the temperature range between 82 and 723 K. Display Omitted Research highlights: {yields} The ordering between In(III) and Ta(V) cations in Ba{sub 2}InTaO{sub 6} is controlled by kinetic process requiring prolonged heat treatment. {yields} Ba{sub 2}InTaO{sub 6} adopts the cubic space group Fm3-bar m instead of tetragonal P4/mnc. {yields} No phase transition occurs in the temperature range between 82 and 723 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

B-site substitutions in LaNb{sub 1-x}M{sub x}O{sub 4-{delta}} materials in the search for potential proton conductors (M=Ga, Ge, Si, B, Ti, Zr, P, Al)

The solid solubilities of potential B-site dopants in LaNb{sub 1-x}M{sub x}O{sub 4-{delta},} materials, M=Ga, Ge, Si, Al, B, P, Zr or Ti, have been investigated in the search for possible novel proton conductors. In general, the solubility levels of these cations were found to be very low (x{<=}0.03). At the maximum value x=0.03, only compositions containing Ti, Ge, Ga and Si appeared pure at the limit of resolution of XRD. The literature phase diagram, La{sub 2}O{sub 3}-Nb{sub 2}O{sub 5}-ZrO{sub 2}, has been re-analysed for compositions of low Zr-content around the composition LaNbO{sub 4}. The electrical properties of phase pure Ti-doped compositions have been studied. Higher bulk and total conductivities were observed in wet than dry conditions, suggesting a significant protonic contribution to total conductivity. In wet conditions, the activation energy for bulk conductivity of LaNb{sub 0.98}Ti{sub 0.02}O{sub 4-{delta}} was found to be much higher than that of an A-site, Sr-doped material, Sr{sub 0.02}La{sub 0.98}NbO{sub 4-{delta},} of similar acceptor dopant concentration. The Sr-doped composition offered higher conductivities than the Ti-doped composition up to approximately 900{sup o}C. -- Graphical abstract: Comparison of total (open symbols) and bulk (closed symbols) conductivities measured in wet (p(H{sub 2}O){approx}0.026 atm.) nitrogen and oxygen atmospheres for LaNb{sub 0.98}Ti{sub 0.02}O{sub 4-{delta}} (LNT2O) and Sr{sub 0.02}La{sub 0.98}NbO{sub 4-{delta}} (S2LNO) materials. Display Omitted Research highlights: {yields} The article investigates solid solubilities of potential B-site dopants in the potential proton conductor LaNb{sub 1-x}M{sub x}O{sub 4-{delta},} {yields} The literature phase diagram, La{sub 2}O{sub 3}-Nb{sub 2}O{sub 5}-ZrO{sub 2}, has been corrected for compositions of low Zr-content around the composition LaNbO{sub 4}. {yields} The electrical properties of Ti-doped compositions have been assessed in wet and dry conditions. {yields} Comparison has been made between the electrical properties of B-site, Ti-doped, compositions and A-site, Sr-doped, compositions.

36 MATERIALS SCIENCE↗

High-pressure synthesis and structural behavior of sodium orthonitrate Na{sub 3}NO{sub 4}

Sodium orthonitrate (Na{sub 3}NO{sub 4}) is an unusual phase containing the first example of isolated tetrahedrally bonded NO{sub 4}{sup 3-} groups. This compound was obtained originally by heating together mixtures of Na{sub 2}O and NaNO{sub 3} for periods extending up to >14 days in evacuated chambers. Considering the negative volume change between reactants and products, it was inferred that a high-pressure synthesis route might favor the formation of the Na{sub 3}NO{sub 4} compound. We found that the recovered sample is likely to be a high-pressure polymorph, containing NO{sub 4}{sup 3-} groups as evidenced by Raman spectroscopy. The high-pressure behavior of Na{sub 3}NO{sub 4} was studied using Raman spectroscopy and synchrotron X-ray diffraction in a diamond anvil cell above 60 GPa. We found no evidence for major structural transformations, even following laser heating experiments carried out at high pressure, although broadening of the Raman peaks could indicate the onset of disordering at higher pressure. -- Graphical abstract: We studied Na{sub 3}NO{sub 4} at high pressure using Raman spectroscopy and X-ray diffraction and determined V(P) to 64 GPa. We investigated synthesis and phase behavior of the orthonitrate at high-P,T conditions. Display Omitted Research highlights: {yields} Investigation of Na{sub 3}NO{sub 4} at extreme compression (up to 64 GPa) using Raman spectroscopy and X-ray diffraction. {yields} Synthesis of Na{sub 3}NO{sub 4} via high-pressure conditions. {yields} Estimation of the bulk moduli of Na{sub 3}NO{sub 4} and Na{sub 2}O and comparison with related compounds. {yields} Exploratory laser heating run in search for high-pressure Na{sub 3}NO{sub 4} phases.

36 MATERIALS SCIENCE↗

Local structure in solid solutions of stabilised zirconia with actinide dioxides (UO{sub 2}, NpO{sub 2})

The local structure of (Zr,Lu,U)O{sub 2-x} and (Zr,Y,Np)O{sub 2-x} solid solutions has been investigated by extended X-ray absorption fine structure (EXAFS). Samples were prepared by mixing reactive (Zr,Lu)O{sub 2-x} and (Zr,Y)O{sub 2-x} precursor materials with the actinide oxide powders, respectively. Sintering at 1600 {sup o}C in Ar/H{sub 2} yields a fluorite structure with U(IV) and Np(IV). As typical for stabilised zirconia the metal-oxygen and metal-metal distances are characteristic for the different metal ions. The bond lengths increase with actinide concentration, whereas highest adaptation to the bulk stabilised zirconia structure was observed for U---O and Np---O bonds. The Zr---O bond shows only a slight increase from 2.14 A at 6 mol% actinide to 2.18 A at infinite dilution in UO{sub 2} and NpO{sub 2}. The short interatomic distance between Zr and the surrounding oxygen and metal atoms indicate a low relaxation of Zr with respect to the bulk structure, i.e. a strong Pauling behaviour. -- Graphical abstract: Metal-oxygen bond distances in (Zr,Lu,U)O{sub 2-x} solid solutions with different oxygen vacancy concentrations (Lu/Zr=1 and Lu/Zr=0.5). Display Omitted Research Highlights: {yields} EXAFS indicates high U and Np adaption to the bulk structure of stabilised zirconia. {yields} Zr---O bond length is 2.18 A at infinite Zr dilution in UO{sub 2} and NpO{sub 2}. {yields} Low relaxation (strong Pauling behaviour) of Zr explains its low solubility in UO{sub 2}.

36 MATERIALS SCIENCE↗

Determining the structure of tetragonal Y{sub 2}WO{sub 6} and the site occupation of Eu{sup 3+} dopant

The compound Y{sub 2}WO{sub 6} is prepared by solid state reaction at 750 {sup o}C using sodium chloride as mineralizer. Its structure is solved by ab-initio methods from X-ray powder diffraction data. This low temperature phase of yttrium tungstate crystallizes in tetragonal space group P4/nmm (No. 129), Z=2, a=5.2596(2) A, c=8.4158(4) A. The tungsten atoms in the structure adopt an unusual [WO{sub 6}] distorted cubes coordination, connecting [YO{sub 6}] distorted cubes with oxygen vacancies at the O{sub 2} layers while other yttrium ions Y{sub 2} form [YO{sub 8}] cube coordination. Y{sup 3+} ions occupy two crystallographic sites of 2c (C{sub 4v} symmetry) and 2a (D{sub 2d} symmetry) in the Y{sub 2}WO{sub 6} host lattice. With Eu{sup 3+} ions doped, the high resolution emission spectrum of Y{sub 2}WO{sub 6}:Eu{sup 3+} suggests that Eu{sup 3+} partly substituted for Y{sup 3+} in these two sites. The result of the Rietveld structure refinement shows that the Eu{sup 3+} dopants preferentially enter the 2a site. The uniform cube coordination environment of Eu{sup 3+} ions with the identical eight Eu-O bond lengths is proposed to be responsible for the intense excitation of long wavelength ultraviolet at 466-535 nm. -- Graphical abstract: The excitation and emission spectra of Y{sub 2}WO{sub 6}:Eu{sup 3+} indicates the effect of long wavelength-excited property, which is ascribed to the cube coordination environment of Eu{sup 3+} ions with the uniform Eu-O bond length. Display Omitted Research highlights: Y{sub 2}WO{sub 6} is prepared using sodium chloride as mineralizer. The structure of the compound Y{sub 2}WO{sub 6} is solved by ab-initio methods. The site occupation of Eu{sup 3+} is determined. The cube coordination of Eu{sup 3+} ions is responsible for the long wavelength excitation.

36 MATERIALS SCIENCE↗

Preparation, crystal structure and photoluminescence of garnet-type calcium tin titanium aluminates

Colorless and transparent single crystals of Ca{sub 3}Sn{sub 2.2}Ti{sub 0.8}Al{sub 2}O{sub 12}, which emit blue-white light under ultraviolet light, were prepared by heating a mixture of oxides and calcium carbonate with a calcium and aluminum-rich composition at 1500 {sup o}C. Single crystal X-ray diffraction revealed that the crystal structure is the garnet-type with a cubic cell parameter (a=12.5309(3) A) and the space group, Ia 3-bar d (R1=0.0277, wR2=0.0663, and S=1.367 for all data). The structural formula is presented as Ca{sub 3}[Sn{sub 0.96}Ti{sub 0.04}]{sub octa}[Al{sub 0.67}Ti{sub 0.24}Sn{sub 0.09}]{sub tetra}O{sub 12}. Polycrystalline solid solutions of Ca{sub 3}Sn{sub 3-x}Ti{sub x}Al{sub 2}O{sub 12} were prepared by solid state reaction in air at 1370 {sup o}C with nominal titanium contents from x=0.6 to 1.4. The refined unit cell parameter decreased with increasing x. A broad blue-white emission with a peak wavelength of 465 nm was observed for the solid solutions at room temperature. -- Graphical abstract: Garnet-type solid solutions of Ca{sub 3}Sn{sub 3-x}Ti{sub x}Al{sub 2}O{sub 12} (x=0.6-1.4) were prepared. Sn{sup 4+} and Ti{sup 4+} partially occupy both tetrahedral and octahedral sites. The solid solutions showed a broad emission band peaking at 465 nm under UV excitation. Display Omitted Research highlights: {yields} New garnet-type solid solutions were found in the CaO-Al{sub 2}O{sub 3}-TiO{sub 2}-SnO{sub 2} system. {yields} Single crystals of Ca{sub 3}Sn{sub 2.2}Ti{sub 0.8}Al{sub 2}O{sub 12} were obtained by the self-flux method. {yields} Solid solutions with nominal compositions Ca{sub 3}Sn{sub 3-x}Ti{sub x}Al{sub 2}O{sub 12} (x=0.6-1.4) were prepared by solid state reaction at 1370 {sup o}C. {yields} Sn{sup 4+} and Ti{sup 4+} partially occupy both tetrahedral and octahedral sites, respectively, in the garnet-type structure. {yields} Ca{sub 3}Sn{sub 3-x}Ti{sub x}Al{sub 2}O{sub 12} solid solutions emitted blue-white light with a peak wavelength at 465 nm under UV irradiation.

36 MATERIALS SCIENCE↗

Perovskite-type SrTi{sub 1-x}Nb{sub x}(O,N){sub 3} compounds: Synthesis, crystal structure and optical properties

The synthesis, crystal structure, thermal stability and absorbance spectra of perovskite-type oxynitrides with the general formula SrTi{sub 1-x}Nb{sub x}(O,N){sub 3} (x=0.05, 0.10, 0.20, 0.50, 0.80, 0.90, 0.95) have been investigated. Oxide samples were prepared by a polymerized complex synthesis route and post-treated under ammonia at 850 {sup o}C for 24 h to substitute nitrogen for oxygen. Synchrotron X-ray powder diffraction (XRD) evidenced that the mixed oxide phases were all transformed into oxynitrides with perovskite-type structure during a thermal ammonolysis. SrTi{sub 1-x}Nb{sub x}(O,N){sub 3} with compositions x{<=}0.80 crystallized in a cubic and samples with x{>=}0.90 in a tetragonal structure. The Rietveld refinement indicated a continuous enlargement of the lattice parameters towards higher niobium content of the samples. Thermogravimetric analysis (TGA) and hotgas extraction revealed the dependence of the nitrogen incorporation upon the degree of niobium substitution. It showed that more nitrogen was detected in the samples with higher niobium content. Furthermore, TGA disclosed stability for all oxynitrides at T{<=}400 {sup o}C. Diffuse reflectance spectroscopy indicated a continuous decrease of the band gap's width from 3.24 eV (SrTi{sub 0.95}Nb{sub 0.05} (O,N){sub 3}) to 1.82 eV (SrTi{sub 0.05}Nb{sub 0.95}(O,N){sub 3}) caused by the increasing amount of nitrogen towards the latter composition. -- Graphical Abstract: The system SrTi{sub 1-x}Nb{sub x}(O,N){sub 3} is described and the changes in crystal structure, nitrogen content and width of the band gap are discussed. Display Omitted Research highlights: {yields} Synthesis of SrTi{sub 1-x}Nb{sub x}(O,N){sub 3} perovskite-type oxynitrides via thermal ammonolysis. {yields} Co-substitution of Nb{sup 5+} enabled to adjust the amount nitrogen insertion. {yields} Tuning of the optical band gap through nitrogen.{yields} Changes of crystal structure from cubic to tetragonal with increasing niobium content.

36 MATERIALS SCIENCE↗

Phonons in isostructural (ND,Yb):Y{sub x}Gd{sub 1-x}(VO{sub 4}) laser crystals: A Raman scattering study

The room temperature phonon modes of the isostructural (Nd,Yb):Y{sub x}Gd{sub 1-x}(VO{sub 4}) laser crystals were determined using the Raman scattering technique, and the observed wavenumbers follow the overall mode distribution expected for REVO{sub 4} (RE=rare earth) compounds with the tetragonal zircon structure, D{sub 4h}{sup 19}. They were assigned according to the group theory in terms of the internal modes of the VO{sub 4} tetrahedron and the external modes of the Y{sub x}Gd{sub 1-x}(VO{sub 4}) lattice. No appreciable changes in the phonon wavenumbers were observed for Yb:GdVO{sub 4} (Yb=0.008, 0.015, 0.020, 0.025, and 0.035), indicating that the force fields in the GdVO{sub 4} lattice are not strongly altered by Yb doping at the Gd site. However, most of the phonon wavenumbers in the systems (Nd,Yb):Y{sub x}Gd{sub 1-x}(VO{sub 4}) shifts upwards (one-phonon-like behavior) when Y replaces for Gd. -- Graphical abstract: Plot of the observed wavenumbers of Nd:Y{sub x}Gd{sub 1-x}(VO{sub 4}) versus Y content (x). The linear trend indicates that most of the observed wavenumbers exhibit a one-phonon-like behavior. Display Omitted Research highlights: > Force fields in the GdVO{sub 4} lattice are not strongly altered by Yb doping at the Gd site when the doping content of Yb is below 3.5 at%. > Most of the phonon wavenumbers in the systems (Nd,Yb):Y{sub x}Gd{sub 1-x}(VO{sub 4}) shifts upwards with x increasing. > The upward shifting is related to the decrease of the RE-O distance due to the lattice contraction. > Most of the observed wavenumbers exhibits a one-phonon-like behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structures and luminescent properties of two 4d-4f Ln-Ag heterometallic coordination polymers based on anion template

Two new 4d-4f Ln-Ag heterometallic coordination polymers, {l_brace}[Ln{sub 3}Ag{sub 5}(IN){sub 10}(H{sub 2}O){sub 7}].4(ClO{sub 4}).4(H{sub 2}O){r_brace}{sub n} (Ln=Eu (1) and Sm (2), HIN=isonicotinic acid), have been synthesized under hydrothermal conditions by reactions of Ln{sub 2}O{sub 3}, AgNO{sub 3}, HIN and HClO{sub 4}, and characterized by elemental analysis, IR, thermal analysis and single-crystal X-ray diffraction. It is proved that HClO{sub 4} not only adjusts the pH value of the reaction mixture, but also acts as anion template. The structure determination reveals that 1 and 2 are isostructural and feature a novel two-dimensional (2D) layered hetrometallic structure constructed from one-dimensional Ln-carboxylate chains and pillared Ag(IN){sub 2} units. The 2D layers are further interlinked through Ag...Ag and Ag...O(ClO{sub 4}{sup -}) multiple weak interactions, which form a rare Ag-ClO{sub 4} ribbon in lanthanide-transition metal coordination polymers, to give rise to a three-dimensional supramolecular architecture. Moreover, the luminescent properties of these two compounds have also been investigated at room temperature. -- Graphical abstract: Two new anion-templated 2D 4d-4f Ln-Ag heterometallic coordination polymers based on novel lanthanide-carboxylate chains and pillared Ag(IN){sub 2} units, {l_brace}[Ln{sub 3}Ag{sub 5}(IN){sub 10}(H{sub 2}O){sub 7}].4(ClO{sub 4}).4(H{sub 2}O){r_brace}{sub n} (Ln=Eu (1) and Sm (2), HIN=isonicotinic acid), have been hydrothermally synthesized and structurally characterized. 1 and 2 exhibit good luminescent properties. Display Omitted Research highlights: > Two 2D Eu (Sm)-Ag coordination polymers templated by perchlorate anion have been synthesized. > Polymers consist of novel 1D lanthanide-carboxylate chains. > In both structures, there are rare Ag...Ag and Ag...O(ClO{sub 4}{sup -}) multiple weak interactions. > Both compounds exhibit good luminescent properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structurally-driven metal-insulator transition in Ca{sub 2}Ru{sub 1-x}Cr{sub x}O{sub 4} (0{<=}x<0.14): A single crystal X-ray diffraction study

Correlation between structure and transport properties are investigated in high-quality single-crystals of Ca{sub 2}Ru{sub 1-x}Cr{sub x}O{sub 4} with 0<x<0.14 using single crystal X-ray diffraction and by electronic studies. The parent compound was known to exhibit an intriguing first-order structurally driven metal-insulator (MI) transition at 357 K. Upon chromium doping on the ruthenium site, the metal-insulator transition temperature (T{sub MI}) was drastically reduced, and is related to the competition between structural changes that occur upon Cr doping and with decreasing temperature. A strong suppression of structural distortions with increasing Cr substitution was identified. No clear T{sub MI} can be observed when x>13.5% and the system behaves as an insulator. Such a large, sharp metal-insulator transition and tuneable transition temperature may have potential applications in electronic devices. -- Graphical abstract: The metal-insulator transition temperature (T{sub MI}) was drastically reduced by Cr doping, and is closely related to the distortion of structure. Display Omitted Research highlights: {yields} The metal-insulator transition temperature (T{sub MI}) was drastically reduced by doping Cr into Ca{sub 2}RuO{sub 4} single crystal. {yields} Detailed single crystal structural analysis provided important insight into this structurally-driven metal-insulator transition. {yields} Negative Volume Thermal Expansion (NVTE) was observed with increasing temperature.

36 MATERIALS SCIENCE↗

Structural study and physical properties of a new phosphate KCuFe(PO{sub 4}){sub 2}

Single crystals of a new phosphate KCuFe(PO{sub 4}){sub 2} have been prepared by the flux method and its structural and physical properties have been investigated. This compound crystallizes in the monoclinic system with the space group P2{sub 1}/n and its parameters are: a=7.958(3) A, b=9.931(2) A, c=9.039(2) A, {beta}=115.59(3){sup o} and Z=4. Its structure consists of FeO{sub 6} octahedra sharing corners with Cu{sub 2}O{sub 8} units of edge-sharing CuO{sub 5} polyhedra to form undulating chains extending infinitely along the b-axis. These chains are connected by the phosphate tetrahedra giving rise to a 3D framework with six-sided tunnels parallel to the [101] direction, where the K{sup +} ions are located. The Moessbauer spectroscopy results confirm the exclusive presence of octahedral Fe{sup 3+} ions. The magnetic measurements show the compound to be antiferromagnetic with C{sub m}=5.71 emu K/mol and {theta}=-156.5 K. The derived experimental effective moment {mu}{sub ex}=6.76{mu}{sub B} is somewhat higher than the theoretical one of {mu}{sub th}=6.16{mu}{sub B}, calculated taking only into account the spin contribution for Fe{sup 3+} and Cu{sup 2+} cations. Electrical measurements allow us to obtain the activation energy (1.22 eV) and the conductivity measurements suggest that the charge carriers through the structure are the potassium cations. -- Graphical abstract: A projection along the [101] direction of the structure showing the six-edged tunnels, occupied by the K{sup +} ions. Display Omitted Highlights: {yields} The reported structure is of a new type. {yields} The structural model is supported by a Moessbauer spectroscopy study. {yields} The magnetic susceptibility results are reported. {yields} The electrical properties are discussed.

36 MATERIALS SCIENCE↗

Synthesis, characterization and photocatalytic properties of novel zinc germanate nano-materials

We report the first instance of a hydrothermal synthesis of zinc germanate (Zn{sub 2}GeO{sub 4}) nano-materials having a variety of morphologies and photochemical properties in surfactant, template and catalyst-free conditions. A systematic variation of synthesis conditions and detailed characterization using X-ray diffraction, ultraviolet-visible diffuse reflectance spectroscopy, Raman spectroscopy, electron microscopy, X-ray photoelectron spectroscopy and small angle X-ray scattering led to a better understanding of the growth of these particles from solution. At 140 {sup o}C, the zinc germanate particle morphology changes with pH from flower-shaped at pH 6.0, to poly-disperse nano-rods at pH 10 when the Zn to Ge ratio in the synthesis solution is 2. When the Zn to Ge ratio is reduced to 1.25, mono-disperse nano-rods could be prepared at pH 7.5. Nanorod formation is also independent of the addition of cetyltrimethylammonium bromide (CTAB), in contrast to previous reports. Photocatalytic tests show that Zn{sub 2}GeO{sub 4} nano-rods (by weight) and flower shaped (by surface area) are the most active for methylene blue dye degradation among the synthesized zinc germanate materials. -- Graphical abstract: Zinc germanate materials were synthesized possessing unique morphologies dependent on the hydrothermal synthesis conditions in the absence of surfactant, catalyst or template. These novel materials are characterized and evaluated for their photocatalytic activities. Display Omitted highlights: > Zinc germanate synthesized hydrothermally (surfactant free) with unique morphologies. > Flower-shaped, nano-rods, globular particles obtained dependent on synthesis pH. > At 140 {sup o}C, they possess the rhombohedral crystal irrespective of synthesis conditions. > They are photocatalytically active for the degradation of methylene blue. > Potential applications could be photocatalytic water splitting and CO{sub 2} reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syntheses, crystal structures, thermal stabilities and luminescence of six M(II)-hydroxyphosphonoacetate materials

Hydrothermal reactions of Zn{sup II}, Ba{sup II} or Co{sup II} ion with 2-hydroxyphosphonoacetic acid (H{sub 3}L) afforded six metal phosphonates, namely, [Zn{sub 5}(O{sub 3}PCH(OH)CO{sub 2}){sub 4}(C{sub 6}H{sub 9}N{sub 2}){sub 2}] (1), [(C{sub 4}H{sub 12}N{sub 2})Zn{sub 5}(O{sub 3}PCH(OH)CO{sub 2}){sub 4}(H{sub 2}O){sub 2}] (2), [(C{sub 3}H{sub 12}N{sub 2}){sub 0.5}Zn{sub 5}(HO{sub 3}PCH(OH)CO{sub 2})(O{sub 3}PCH(OH)CO{sub 2}){sub 3}(H{sub 2}O){sub 2}].0.75H{sub 2}O (3), [BaZn{sub 2}(O{sub 3}P CH(OH)CO{sub 2}){sub 2}] (4), [Ba(HO{sub 3}PCH(OH)CO{sub 2})] (5) and [(NH{sub 4}){sub 2}Co{sub 7}(HO{sub 3}PCH(OH) CO{sub 2}){sub 6}(HPO{sub 4}){sub 2}(H{sub 2}O){sub 6}].4H{sub 2}O (6). In 1, zinc tetrahedra ([ZnO{sub 4}]) and octahedra ([ZnO{sub 5}N], [ZnO{sub 6}]) are bridged by 2-hydroxyphosphonoacetate with penta- and hexadendate modes into a hybrid layer, which is further pillared by the 3-picolylamines to form a 3D structure through Zn-N bonds and hydrogen bondings. Both 2 and 3 are 3D framework encapsulating piperazine and 1,2-propanediamine cations, respectively. In solids 4-6, the cross-linkages of [ZnO{sub 4}], [BaO{sub 10}] and [CoO{sub 6}] polyhedral with 2-hydroxyphosphonoacetate form 3D frameworks. Solids 3 and 4 behave thermally stable up to 250 and 300 {sup o}C under air atmosphere, respectively. It is interesting that the peak emission of solid 3 displays a 10 nm red-shift after simple heat-treatment. -- Graphical abstract: Six new metal phosphonates exhibit layered or 3D frameworks based on 2-hydroxyphosphonoacetate with five new coordination modes. Display Omitted Research highlights: {yields} Metal phosphonates are layered or 3D frameworks. {yields} Metal phosphonates are stable up to 250-300 {sup o}C under air atmosphere. {yields} 2-Hydroxyphosphonoacetate displays five new coordination modes.

36 MATERIALS SCIENCE↗

Phase diagram of SrO-InO{sub 1.5}-CoO{sub x} and a new compound Sr{sub 3}In{sub 0.9}Co{sub 1.1}O{sub 6}

Sr{sub 3}In{sub 0.9}Co{sub 1.1}O{sub 6}, isostructural to Ca{sub 3}Co{sub 2}O{sub 6}, is revealed by the study of the phase relations in the system SrO-InO{sub 1.5}-CoO{sub x} (1000 {sup o}C). The structure of Sr{sub 3}In{sub 0.9}Co{sub 1.1}O{sub 6} is refined by the combination of powder X-ray and neutron diffraction. Sr{sub 3}In{sub 0.9}Co{sub 1.1}O{sub 6} crystallizes in a trigonal lattice with the cell parameters a=b=9.59438(3) A, c=11.02172(4) A with the space group R-3c. Its structure possesses 1D (In/Co)O{sub 3} chains running along the c-axis constructed by alternating face-sharing CoO{sub 6} octahedra and (In{sub 0.9}Co{sub 0.1})O{sub 6} trigonal prisms. The co-occupation of In{sup 3+} and Co{sup 3+} at the trigonal prismatic site is evidenced by elementary analysis and determined by the structure refinement. Sr{sub 3}In{sub 0.9}Co{sub 1.1}O{sub 6} is paramagnetic, and the susceptibility is consistent with the occupation of Co{sup 3+} at 10% of the trigonal prismatic positions in a high spin state (HS, S=2). The HS Co{sup 3+} is well separated by diamagnetic CoO{sub 6} octahedra and InO{sub 6} trigonal prisms and shows a g factor of 2.0 in the magnetic measurements. -- Graphical abstract: Sr{sub 3}In{sub 0.9}Co{sub 1.1}O{sub 6} possesses 1D chains constructed by alternating face-sharing CoO{sub 6} octahedra and (In{sub 0.9}Co{sub 0.1})O{sub 6} trigonal prisms. The high spin Co{sup 3+} (S=2) in trigonal prism shows a g factor of 2.0. Display Omitted Research highlights: {yields} Phase diagram of SrO-InO{sub 1.5-}CoO{sub x} at 1000 {sup o}C in air atmosphere is presented. {yields} A new compound Sr{sub 3}In{sub 0.9}Co{sub 1.1}O{sub 6} that is isostructural to Ca{sub 3}Co{sub 2}O{sub 6} is revealed. {yields} 1D chain is formed by alternating face-sharing CoO{sub 6} octahedra and (In{sub 0.9}Co{sub 0.1})O{sub 6} trigonal prisms.{yields} Co{sup 3+} at trigonal prismatic site is in high spin state (S=2) with a g factor of 2.0.

36 MATERIALS SCIENCE↗