Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Monolayers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Resistive switching properties of monolayer h-BN atomristors with different electrodes

Resistive switching properties based on molecular beam epitaxy-grown monolayer hexagonal boron nitride (h-BN) atomristors are studied by using metal insulator metal configurations with different electrode materials. Au/monolayer h-BN/Ni devices demonstrate a forming-free bipolar resistive switching (BRS) behavior, a good endurance with up to 97 cycles at a high compliance current of 100 mA, an average on/off ratio of 10 3 , and a low set/reset voltage variability. Metal/monolayer h-BN/graphite/Co devices exhibit self-compliant current BRS characteristics. Both metal/h-BN/Ni and metal/h-BN/graphite/Co devices show the coexistence of BRS, unipolar resistive switching (URS), and nonvolatile threshold switching (TH) modes. The formation of conductive filaments is attributed to the diffusion and trapping of metal ions on the defect sites driven by the electric field, while the rupture is driven by the electric field in BRS and by Joule heating in URS and TH modes.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Work function lowering of LaB 6 by monolayer hexagonal boron nitride coating for improved photo- and thermionic-cathodes

We report a lowering of work function for lanthanum hexaboride (LaB 6 ) by monolayer hexagonal boron nitride (hBN) coating. Photoemission electron microcopy (PEEM) and thermionic emission electron microscopy (TEEM) both revealed that the hBN coated region of a LaB 6 (100) single crystal has a lower work function compared to the bare (i.e., non-coated) and graphene coated regions. A broad and uniform brighter image of the hBN coated region in PEEM was quantitatively supported by a 0.4 eV decrease in the work function in photoelectron spectra compared to the bare region. TEEM results were consistent in that the hBN coated region exhibited thermionic emission at 905 °C, whereas the bare and graphene coated regions did not. A larger decrease in the work function for hBN coated LaB 6 (100) compared to graphene coated LaB 6 (100) was qualitatively supported by our density functional theory calculations. Adding an oxide layer in the calculations improved consistency between the calculation and experimental results. We followed up our calculations with synchrotron-radiation x-ray photoelectron spectroscopy and confirmed the presence of an oxide layer on our LaB 6 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Automated tabletop exfoliation and identification of monolayer graphene flakes

Over the past two decades, graphene has been intensively studied because of its remarkable mechanical, optical, and electronic properties. Initial studies were enabled by manual “Scotch Tape” exfoliation; nearly two decades later, this method is still widely used to obtain chemically pristine flakes of graphene and other 2D van der Waals materials. Unfortunately, the yield of large, pristine flakes with uniform thickness is inconsistent. Thus, significant time and effort are required to exfoliate and locate flakes suitable for fabricating multilayer van der Waals heterostructures. Here, we describe a relatively affordable tabletop device (the “eXfoliator”) that can reproducibly control key parameters and largely automate the exfoliation process. In a typical exfoliation run, the eXfoliator produces 3 or more large (≥ 400 μm 2 ) high-quality graphene monolayer flakes, allowing new users to produce such flakes at a rate comparable to manual exfoliation by an experienced user. Furthermore, we use an automated mapping system and a computer vision algorithm to locate candidate flakes. Our results provide a starting point for future research efforts to identify more precisely which parameters matter for the success of exfoliation and to optimize them.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Terahertz magneto-nanoscopy of encapsulated monolayer graphene

This study investigates the nanoscale conductivity of encapsulated monolayer graphene at temperatures down to 5 K and magnetic fields of up to 1 T. We use the scattering-type scanning near-field optical microscopy technique to probe magnetic-field-dependent responses from graphene close to charge neutrality in the terahertz spectral region. We observe the near-perfect high-q reflector behavior of graphene but with subtle changes by the presence of magnetic fields. Measurements align with calculations of the magneto-optical conductivity and the near-field spectroscopic contrast that describes the field-tunable cyclotron resonance of Dirac fermions. Our result provides an initial step toward understanding temperature and magnetic field effects on nanoscale terahertz transport in two-dimensional quantum materials.

Kim, Richard H. J. [Ames Laboratory (AMES), Ames, ↗
DOE OSTI2024

Interlayer engineering of Fe 3 GeTe 2 : From 3D superlattice to 2D monolayer

The discoveries of ferromagnetism down to the atomically thin limit in van der Waals (vdW) crystals by mechanical exfoliation have enriched the family of magnetic thin films [C. Gong et al., Nature 546 , 265–269 (2017) and B. Huang et al., Nature 546 , 270–273 (2017)]. However, compared to the study of traditional magnetic thin films by physical deposition methods, the toolbox of the vdW crystals based on mechanical exfoliation and transfer suffers from low yield and ambient corrosion problem and now is facing new challenges to study magnetism. For example, the formation of magnetic superlattice is difficult in vdW crystals, which limits the study of the interlayer interaction in vdW crystals [M. Gibertini, M. Koperski, A. F. Morpurgo, K. S. Novoselov, Nat. Nanotechnol. 14 , 408–419 (2019)]. Here, we report a strategy of interlayer engineering of the magnetic vdW crystal Fe 3 GeTe 2 (FGT) by intercalating quaternary ammonium cations into the vdW spacing. Both three-dimensional (3D) vdW superlattice and two-dimensional (2D) vdW monolayer can be formed by using this method based on the amount of intercalant. On the one hand, the FGT superlattice shows a strong 3D critical behavior with a decreased coercivity and increased domain wall size, attributed to the co-engineering of the anisotropy, exchange interaction, and electron doping by intercalation. On the other hand, the 2D vdW few layers obtained by over-intercalation are capped with organic molecules from the bulk crystal, which not only enhances the ferromagnetic transition temperature ( T C ), but also substantially protects the thin samples from degradation, thus allowing the preparation of large-scale FGT ink in ambient environment.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Enhanced ferromagnetism in monolayer Cr 2 Te 3 via topological insulator coupling

Exchange-coupled interfaces are pivotal in exploiting two-dimensional (2D) ferromagnetism. Due to the extraordinary correlations among charge, spin, orbital and lattice degrees of freedom, layered magnetic transition metal chalcogenides (TMCs) bode well for exotic topological phenomena. Here we report the realization of wafer-scale Cr 2 Te 3 down to monolayer (ML) on insulating SrTiO 3 (111) and/or Al 2 O 3 (001) substrates using molecular beam epitaxy. Robust ferromagnetism persists in the 2D limit. In particular, the Curie temperature T C of 2 ML Cr 2 Te 3 increases from 100 K to ∼120 K when proximitized to topological insulator (TI) (Bi,Sb) 2 Te 3 , with substantially boosted magnetization as observed via polarized neutron reflectometry. Our experiments and theory strongly indicate that the Bloembergen–Rowland interaction is likely universal underlying T C enhancement in TI-coupled magnetic heterostructures. The topological-surface-enhanced magnetism in 2D TMC enables further exchange coupling physics and quantum hybrid studies, including paving the way to realize interface-modulated topological electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dilute magnetic impurity-induced effective phonon magnetic moment in Fe-doped monolayer MoS 2

Realization of large effective phonon magnetic moment in monolayer MoS 2 has established an important route for exploring intriguing magnetic phenomena in a nonmagnetic material. The sizable coupling between the orbital transition and the circularly polarized phonon results in the large effective phonon magnetic moment. In this work, using magneto-Raman spectroscopy, we investigate substitutional doping of magnetic atoms as a tuning knob of the electronic and phononic properties of MoS 2 . We show that Fe-doping polarizes the spin of the conduction bands and introduces a localized Fe band underneath the conduction band. As a result, an additional orbital transition between the Mo 4d and Fe 3d states emerges, producing an orbital-phonon hybridized mode at 283 cm −1 . Our magnetic field dependent measurements demonstrate that this new mode carries 2.8 $\mu_{\mathrm{B}}$ effective phonon magnetic moment, which is comparable to that of the undoped MoS 2 . Moreover, even though a long-range magnetic order is absent in Fe-doped MoS 2 , the local magnetic moment of Fe modifies the nature of the spin fluctuation, producing monotonically increasing quasielastic scattering spectral weight as temperature decreases. Our results highlight two-dimensional dilute magnetic semiconductors synthesized by substitutional doping as a promising material platform to manipulate the phonon magnetic moment through orbital-phonon coupling.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Measurement of the Low-Energy Electron Inelastic Mean Free Path in Monolayer Graphene

Measuring the electron-transport properties of substrate-supported nanomaterials with the traditional two-point comparison method is difficult at electron energies below 50 eV, where core-level signals are too feeble to be detected against the strong secondary-electron background. Herein, a data-driven spectral analysis technique is used to study the low-energy electron-transport properties of substrate-supported target nanomaterials, while eliminating the influence of the substrate signal. Applying this technique, the electron-transport properties of the effective attenuation length and the inelastic mean free path (IMFP) can be determined with extremely high efficiency over the entire measured energy range of 6–600 eV. Further, these results show excellent agreement with other experimental and theoretical results. In this work, significant differences are observed between monolayer graphene and the bulk graphite IMFP, which illustrates the importance of the nanometer effect in the electron-transport properties of the material. Furthermore, this technique is readily applicable to any ultrathin material that can be transferred onto a polycrystalline gold substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Intrinsic orbital and spin Hall effects in monolayer transition metal dichalcogenides

The orbital Hall effect (OHE) is the phenomenon of transverse flow of orbital moment in the presence of an applied electric field. Solids with broken inversion symmetry are expected to exhibit a strong OHE due to the presence of an intrinsic orbital moment at individual momentum points in the Brillouin zone, which in the presence of an applied electric field flows in different directions causing a net orbital Hall current. Here we provide a comprehensive understanding of the effect and its tunability in the monolayer two-dimensional (2D) transition metal dichalcogenides (TMDCs). Both metallic and insulating TMDCs are investigated from full density-functional calculations and effective d-band tight-binding models, as well as a minimal four-band model for the valley points that captures the key physics of the system. For the tuning of the OHE, we examine the role of hole doping as well as the change in the band parameters, which, e.g., can be controlled by strain.We demonstrate that the OHE is a more fundamental effect than the spin Hall effect (SHE), with the momentum-space orbital moments inducing a spin moment in the presence of the spin-orbit coupling, leading to the SHE. The physics of the OHE, described here, is relevant for 2D materials with broken inversion symmetry in general, even beyond the TMDCs, providing a broad platform for future research.

2D materials↗
DOE OSTI2020

Influence of point defects on the electronic and topological properties of monolayer WTe 2

In some topological insulators such as monolayers of WTe 2 or graphene with spin-orbit coupling, band inversion originates from chemical bonding and space group symmetry, in contrast to materials such as Bi 2 Se 3 , where the band inversion derives from relativistic effects in the atoms. In the former, band inversion is susceptible to changes of the chemical environment, e.g., by defects, while the latter are less affected by defects due to the larger energy scale associated with atomic relativistic effects. Motivated by recent experiments, we study the effect of Te vacancies and Te adatoms on the electronic properties of WTe 2 . We find that the Te vacancies have a formation energy of 2.21 eV, while the formation energy of the Te adatoms is much lower with 0.72 eV. Here, the vacancies strongly influence the band structure and we present evidence that band inversion is already reversed at the nominal composition of WTe 1.97 . In contrast, we show that the adatoms do not change the electronic structure in the vicinity of the Fermi level and thus the topological properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Orbital gyrotropic magnetoelectric effect and its strain engineering in monolayer NbX 2

Electrical control of the orbital degrees of freedom is an important area of research in the emerging field of "orbitronics.'' Orbital gyrotropic magneto-electric effect (OGME) is the generation of an orbital magnetization in a nonmagnetic metal by an applied electric field. Here, we show that strain induces a large GME in the monolayer NbX 2 (X = S, Se) normal to the plane, primarily driven by the orbital moments of the Bloch bands as opposed to the conventional spin magnetization, without any need for spin-orbit coupling. The key physics is captured within an effective two-band valley-orbital model and it is shown to be driven by three key ingredients: the intrinsic valley orbital moment, broken $C_{3z}$ symmetry, and strain-induced Fermi surface changes. The effect can be furthermore switched by changing the strain condition, with potential for future device applications.

2D materials↗
DOE OSTI2021

Quantum oscillations in the activated conductivity in excitonic insulators: Possible application to monolayer WTe 2

A recent paper on the insulating state of monolayer WTe 2 reported the observation of large oscillations in the conductivity that are periodic in 1/B, resembling quantum oscillations in metals. This remarkable observation has inspired suggestions of exotic physics such as spin-charge separation. Here, we show that a rather more conventional but still nontrivial explanation in terms of gap modulation may be possible in a model of an excitonic insulator subject to a magnetic field.

2-dimensional systems↗
DOE OSTI2021

Peierls transition, ferroelectricity, and spin-singlet formation in monolayer VOI 2

Using ab initio density functional theory and single-orbital Hubbard model calculations via the density matrix renormalization group method, we systematically studied the monolayer VOI 2 with a 3d 1 electronic configuration. Our phonon calculations indicate that the orthorhombic Pmm2 FE-II phase is the most likely ground state, involving a ferroelectric (FE) distortion along the a axis and V-V dimerization along the b axis. Specifically, the “pseudo Jahn-Teller” effect caused by the coupling between empty V (d xz/yz and d 3z 2 -r 2 ) and O 2p states is proposed as the mechanism that stabilizes the FE distortion from the paraelectric phase. Moreover, the half-filled metallic d xy band displays a Peierls instability along the b axis, inducing a V-V dimerization. Additionally, we found very short-range antiferromagnetic coupling along the V-V chain due to the formation of nearly decoupled spin singlets in the ground state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Dark-exciton energy splitting in monolayer W Se 2 : Insights from time-dependent density functional theory

Here, we present here a formalism based on time-dependent density functional theory to describe characteristics of both intra- and intervalley excitons in semiconductors, the latter of which had remained a challenge. Through the usage of an appropriate exchange-correlation kernel (nanoquanta), we trace the energy difference between the intra- and intervalley dark excitons in monolayer (1L) W⁢ Se 2 to the domination of the exchange part in the exchange-correlation energies of these states. Furthermore, our calculated transition contribution maps establish the momentum resolved weights of the electron-hole excitations in both bright and dark excitons thereby providing a comprehensive understanding of excitonic properties of 1L W⁢ Se 2 . We find that the states consist of hybridized excitations around the corresponding valleys which leads to brightening of the dark excitons, i.e., significantly decreasing their lifetime which is reflected in the PL spectrum. Using many-body perturbation theory, we calculate the phonon contribution to the energy band gap and the linewidths of the excited electrons, holes, and (bright) exciton to find that as the temperature increases the band gap significantly decreases, while the linewidths increase. Our work paves for describing the ultrafast charge dynamics of transition metal dichalcogenide within an ab initio framework.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Theory of glide symmetry protected helical edge states in a WTe 2 monolayer

Helical edge states in quantum spin Hall (QSH) materials are central building blocks of topological matter design and engineering. Despite their principal topological protection against elastic backscattering, the level of operational stability depends on manifold parameters such as the band gap of the given semiconductor system in the “inverted” regime, temperature, disorder, and crystal orientation. Here, we theoretically investigate electronic and transport properties of QSH edge states in large gap 1-T' WTe 2 monolayers. We explore the impact of edge termination, disorder, temperature, and interactions on experimentally addressable edge state observables, such as local density of states and conductance. We show that conductance quantization can remain surprisingly robust even for heavily disordered samples because of an anomalously small edge state decay length and additional protection related to the large direct gap allowed by glide symmetry. From the simulation of temperature-dependent resistance, we find that moderate disorder enhances the stability of conductance by localizing bulk states. We evaluate the edge state velocity and Luttinger liquid parameter as functions of the chemical potential, finding prospects for physics beyond linear helical Luttinger liquids in samples with ultraclean and well-defined edges.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Probing topological phases in a perturbed Kane-Mele model via RKKY interaction: Application to monolayer jacutingaite Pt 2 ⁢HgSe 3

Quantum spin Hall insulators (QSHIs) leverage strong spin-orbit coupling (SOC) for efficient spin manipulation, making them promising for spintronics. Here, in this study, we investigate the noncollinear Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction between two magnetic impurities in a perturbed Kane-Mele model with strong SOC, relevant to monolayer jacutingaite Pt 2 ⁢HgSe 3 as a prominent QSHI. Following the previous studies that mainly focused on the model and its general applications, we provide a systematic examination of the effects of various perturbations and strong spin-orbit hybridizations, which drive phase transitions that have not been extensively explored before. By incorporating these perturbations into the model and accurately accounting for spin-orbit hybridizations through spin-space Green's functions and the RKKY interactions, we uncover distinct, relative (rather than absolute) signatures of different phase transitions. These phase transitions are induced by both static and dynamic perturbations on the magnetic impurities. Notably, we identify additional phases emerging from the interplay with the magnetic substrate. All these influence the switching between ferromagnetic and antiferromagnetic, as well as clockwise and counterclockwise magnetic interactions. Our results provide a practical way to track topological phases through magnetic properties, offering new insights into phase control and spin manipulation in QSHIs.

Kane-Mele model↗
DOE OSTI2025

Reference lattice, sound, stiffness, and magnetic transitions of Ising monolayers

A reference lattice, away from which elastic distortions induced by the spin texturing of two-dimensional (2D) magnets take hold, is motivated from a picture of pairwise Biot-Savart interactions among identical solenoids that either elongate or compress a (“zero-current”) spring lattice. Applied to a paradigmatic CrSiTe 3 monolayer, the reference is given by the average between the atomic positions of ferromagnetic (FM) and Néel antiferromagnetic (AFM) lattices; such an atomic disposition permits understanding structural distortions and elastic energies due to magnetism readily. Furthermore, the anisotropic speed of sound in the magnetic ground state explains an observed anisotropy of vibrational frequencies on similar magnets. Elastic stiffness constants are reported, too. Magnetic energies in four Ising structural configurations were calculated and the strain needed for those 2D magnets to undergo an AFM to FM quantum phase transition was determined as well.

density functional theory↗
DOE OSTI2020

Electrical Control of Magnetic Phase Transition in a Type-I Multiferroic Double-Metal Trihalide Monolayer

Controlling magnetism of two-dimensional multiferroics by an external electric field provides special opportunities for both fundamental research and future development of low-cost electronic nanodevices. Here, we report a general scheme for realizing a magnetic phase transition in 2D type-I multiferroic systems through the reversal of ferroelectric polarization. First, based on first-principles calculations, we demonstrate that a single-phase 2D multiferroic, namely, ReWCl 6 monolayer, exhibits two different low-symmetric ($C_2$) phases with opposite in-plane electric polarization and different magnetic order. As a result, an antiferromagnetic-to-ferromagnetic phase transition can be realized by reversing the in-plane electric polarization through the application of an external electric field. These findings not only enrich the 2D multiferroic family, but also uncover a unique and general mechanism to control magnetism by electric field, thus stimulating experimental interest.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗