Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Meteorite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Meteorite Sample Section Repair at NASA Johnson Space Center

Introduction: Meteorite thin and thick sections are routinely shipped from NASA Johnson Space Center to fulfill sample allocation requests from principle investigators around the world. Sections are also re-turned to JSC when researchers are finished studying them since, in most cases, they can be reused for other studies. The sections are very fragile unfortunately, and sometimes return to us needing repairs. The fol-lowing should give you an idea of how we repair sections here in the very lab where they were created. NOTE: Please do not attempt to repair ANSMET meteorite sections that are in your possession. We will perform the repairs for you at NASA JSC if you send the section back to us. Section Delamination: The majority of the meteorite sections that we produce here are secured to the glass slide using a high quality, two-part epoxy. Occasionally, we are asked to use superglue if the researcher wishes to dismount the section from the slide. Both epoxy and superglue are excellent adhesives, but they both tend to embrittle with time which results in delamination from the slide. Exposure to vacuum can also degrade the adhesion between the sample section and the glass slide. Repeated handling of the slide edges can accelerate delamination and, as a preventive measure, the outer 1-2 mm of epoxy is trimmed from newly created sections at JSC. If conductive tapes (copper, carbon, etc.) are used on the section during analysis, great care must be taken in removing the tape so that the epoxy is not pulled up with it. If in doubt, the tape can be left on the section when it is returned to JSC. Before we perform any repairs to sample sections, carbon, gold, or other coatings are removed. We accomplish this using a slurry of 0.05 micron alumina and 190 proof ethyl alcohol applied to a felt polishing pad fitted to a rotating lap wheel. Coatings are re-moved in this manner from all sections that are re-turned to JSC. The extent of the delamination determines how we proceed with the section repair. If the meteorite sample area of the section is not disturbed, then we carefully remove the delaminated epoxy. This is done using a binocular microscope with a 6X zoom, cut-proof gloves, and a very sharp, single edged razor blade. We cut the delaminated epoxy with the blade angled away from the sample area and using very light pressure. The trimmed section is then cleaned in an ultrasonic bath of 200 proof ethyl alcohol for no more than 10 seconds and carefully dried using a lint-free clean room wipe. The section is then placed into a lab oven at 110o F in preparation for epoxy. We mix the resin and hardener components of the low viscosity epoxy and very small amounts are applied to the cut edges of the section using a needle probe and the binocular microscope. Warming the epoxy helps secure the existing section by filling any voids between the glass slide and the section. After the new epoxy cures, we give the section a light polish on a lap wheel fitted with cotton polishing paper that is charged with 1 micron diamond paste. If the section has delaminated to the point of sample area being lifted from the glass, then it may be irreparable. We employ the above technique along with clamping the section in a Teflon pad arrangement in order to flatten the sample while the epoxy cures. Otherwise, the sample will tend to curl. This works to some degree, but once the sample area curls, it seldom re-turns to the original flatness without cracking or bending. Canada Balsam and Crystalbond: We repair damaged sections that had originally been prepared using Canada Balsam or Crystalbond adhesives through the gradual application of heat. We take great care with these samples since these bonding materials tend to get brittle with age. The section is heated in gradual steps (40-50o F per hour) to the melting point of the adhesive. We repair the sample while the adhesive is fluid and then the section is cooled in the same gradual manner in which it was heated. Slide Cracks and Breaks: Accidents happen. Especially with something as small and fragile as a thin/thick section. We all know someone who has driven a microscope objective into a section. As bad as the damage may look, the section can be repaired in most instances. NOTE: Please do not try to tape or glue section pieces back together prior to returning the dam-aged section. This practice usually renders the section irreparable. If the glass slide is cracked but the section is still in one piece, we repair it by infilling the crack with the low viscosity epoxy mentioned earlier. If the slide is in pieces, we can reassemble it with epoxy on a new backer slide. This is a tricky task as the pieces need to be in the correct plane with respect to each other, especially if the sample area is split among several pieces.

Meteorite↗

Physical Properties of the Stone Meteorites: Implications for the Properties of Their Parent Bodies

The physical properties of the stone meteorites provide important clues to understanding the formation and physical evolution of material in the Solar protoplanetary disk as well providing indications of the properties of their asteroidal parent bodies. Knowledge of these properties is essential for modeling a number of Solar System processes, such as bolides in planetary atmospheres, the thermal inertia of atmosphereless solid body surfaces, and the internal physical and thermal evolution of asteroids and rock-rich icy bodies. In addition, insight into the physical properties of the asteroids is important for the design of robotic and crewed reconnaissance, lander, and sample return spacecraft missions to the asteroids. One key property is meteorite porosity, which ranges from 0% to more than 40%, similar to the range of porosities seen in asteroids. Porosity affects many of the other physical properties including thermal conductivity, speed of sound, deformation under stress, strength, and response to impact. As a result of the porosity, the properties of most stone meteorites differ significantly from those of compact terrestrial rocks, whose physical properties have been used in many models of asteroid behavior. A few physical properties, such as grain density, magnetic susceptibility, and heat capacity are not functions of porosity. Taken together, the grain density and the magnetic susceptibility can be used to classify unweathered or minimally weathered ordinary chondrites. This provides a rapid screening technique to identify heterogeneous samples, classify new samples, and identify misclassified meteorites or interlopers in strewn fields.

Chondritic meteorites↗

Mechanical properties of several iron-nickel meteorites

Iron-nickel meteorites exhibit a unique lamellar microstructure, consisting of small regions with steep-iron-nickel composition gradients. The microstructure arises as a result of slow cooling in a planetary core or other large mass. The microstructure is further influenced by variable concentrations of other elements such as phosphorous which may have influenced cooling and phase separation. Mechanical properties of these composite structures have been investigated using Vickers and spherical indentation, x-ray fluorescence, and EBSD. Direct observation of mechanical properties in these highly structured materials provides a valuable supplement to bulk measurements, which frequently exhibit large variation in dynamic properties, even within a single sample. Previous studies of the mechanical properties of a typical iron-nickel meteorite, a Diablo Canyon specimen, indicated that the strength of the composite was higher by almost an order of magnitude than values obtained from laboratory-prepared specimens. This was ascribed to the extreme work-hardening evident in the EBSD measurements. Additional specimens from the Canyon Diablo fall (type IAB, coarse octahedrite) and several fine octahedrite meteorites, from the Muonionalusta meteorite (IVA) and Gibeon fall (IVA), have been examined to establish a range of error on the previously measured yield, to determine the extent to which deformation upon reentry contributes to yield, and to establish the degree to which the strength varies as a function of microstructure.

36 MATERIALS SCIENCE↗

AMMONIA IN THE EARLY SOLAR SYSTEM: AN ACCOUNT FROM CARBONACEOUS METEORITES

This study presents a survey of abundance distribution and isotopic composition of the ammonia found incorporated in the kerogen-like insoluble material of selected carbonaceous chondrite meteorites; the ammonia was released upon hydrothermal treatment at 300 Degree-Sign C and 100 MPa. With the exception of Allende, a metamorphosed and highly altered stone, all the insoluble organic materials (IOM) of the meteorites analyzed released significant amounts of ammonia, which varied from over 4 {mu}g mg{sup -1} for the Orgueil IOM to 0.5 {mu}g mg{sup -1} for that of Tagish Lake; the IOM of the pristine Antarctica find GRA95229 remains the most rich in freeable ammonia with 10 {mu}g mg{sup -1}. While the amounts of IOM bound ammonia do not appear to vary between meteorites with a recognizable trend, a possible consequence of long terrestrial exposure of some of the stones, we found that the {delta}{sup 15}N composition of the ammonia-carrying materials is clearly distinctive of meteorite types and may reflect a preservation of the original {sup 15}N distribution of pre- and proto-solar materials.

79 ASTRONOMY AND ASTROPHYSICS↗

Evidence for Asteroid Scattering and Distal Solar System Solids From Meteorite Paleomagnetism

Asteroid-sized bodies are predicted to have been scattered throughout the solar system following gravitational interactions with the giant planets. This process could have delivered water-rich small bodies to the inner solar system. However, evidence from the meteorite record supporting this scattering is limited due to difficulties in recovering the formation distance of meteorite parent bodies from laboratory measurements. Moreover, ancient millimeter-sized solids that formed in the inner solar system (calcium-aluminum-rich inclusions and chondrules) have also been proposed to have migrated throughout the solar system, which could have been key to their survival. Our understanding of the driving mechanisms, distances and timings involved in this motion is also restricted for the same reasons. Here, we address these limitations by recovering the formation distance of the parent asteroid of the Tagish Lake meteorite from measurements of its natural remanent magnetization. We find that this meteorite experienced an ancient field intensity <0.15 µT. Accounting for the average effect of a tilted parent body rotation axis and possible uncertainties associated with the remanence acquisition mechanism, this result argues that the Tagish Lake parent body formed at >8 - 13 AU, suggesting this body originates from the distal solar system. Tagish Lake came to Earth from the asteroid belt, which, combined with our recovered formation distance, suggests that some small bodies travelled large distances throughout the solar system. Moreover, Tagish Lake contains calcium-aluminum-rich inclusions and chondrules, indicating that these solids were capable of traveling to the distal solar system within just a few million years.

79 ASTRONOMY AND ASTROPHYSICS↗

Constraints on Chondrule Generation, Disk Dynamics, and Asteroid Accretion from the Compositions of Carbonaceous Meteorites

The elemental and isotopic compositions of meteorites are expected to reflect several key processes that occurred in the early solar system, including the migration of gas and dust throughout the protoplanetary disk, the formation of chondrules, and the accretion of the first planetary bodies. However, the specific origins of the various compositions measured among these rocks are currently poorly constrained, limiting our understanding of these processes. Here, we use previously measured elemental and isotopic compositions of chondrites and iron meteorites to identify that carbonaceous (CC) meteorites are mixtures of noncarbonaceous (NC) material, calcium–aluminum-rich inclusion (CAI) material, and CI (Ivuna-like) material, in varying proportions. These trends indicate that chondrules in CO (Ornans-like), CM (Mighei-like), CV (Vigarano-like), and TL (Tagish Lake) chondrites share near-identical average proportions of CI material, arguing that they were generated through the remelting of preexisting NC chondrules all in the same disk environment. Because this proportion likely evolved over space and time throughout the disk, this similarity argues that these chondrules originate from a restricted spatial region and time interval, favoring their generation through a localized event. Moreover, the compositions of CR (Renazzo-like) chondrites indicate that their constituents formed through mechanisms different from those in CO, CM, CV, and TL chondrites. Furthermore, the recovered proportions of CI material in CC iron meteorites and chondrites together also argue for evolution in either the predominant direction of dust and gas motion in the first ~10 au of the disk or the radial distance of planetesimal accretion throughout the CC reservoir.

58 GEOSCIENCES↗

Xe and Kr analyses of silicate inclusions from iron meteorites.

Measurements have been conducted of the amounts and isotopic composition of Xe and Kr in silicate inclusions of several iron meteorites. It is shown that the Xe and Kr contents are comparable to chondritic values. The isotopic compositions show trapped gas of both chondritic and atmospheric composition. Large spallation effects occur in some of the meteorites; the spallation spectra in some instances differ from those reported for stone meteorites. In several meteorites, very large neutron capture effects on Br and I occur. All samples have pronounced Xe129 excesses which apparently indicate differences in the formation times from chondrites of less than about 100 million years; however, the presence of trapped Xe132 in silicates which were enclosed in molten Fe-Ni and cooled slowly proves that they were not entirely outgassed, so that some of the Xe129 excess may also be trapped.

Bogard, D. D.↗

Trace ferric ion in lunar and meteoritic titanaugites.

Evidence for presence of Fe(3+) in lunar rocks is furnished by heating them in air to 200-225 C for two hours. This causes a large decrease in the same charge transfer bands attributed to Fe(3+) that can be enhanced by heating the same rocks in air at 500 C. This is interpreted as evidence that the Fe(3+) was not in equilibrium in the melt but was produced by cosmic radiation subsequent to the rock formation. Possible tetrahedrally coordinated Fe(3+) is present in the meteoritic and lunar augites as suggested by comparison of their spectra to that of terrestrial augite high in Fe(3+). This would have been present in the original melt and is distinct from radiation produced Fe(3+) in the M-sites. The polarized absorption spectra of single crystal pigeonite and augite from rock 12021 before heating, and augite from 12018 after heating are compared to that of meteoritic titanaugite in the Angra dos Reis meteorite and terrestrial titanaugite from Maui, Hawaii. The absorption spectrum of meteoritic hypersthene (Tatahouine) is also included for comparison to the pigeonite.

Cohen, A. J.↗

On the primordial condensation and accretion environment and the remanent magnetization of meteorites

In the context of various models for the early evolution of a solar nebula, the possible roles assigned to ambient magnetic fields and the paleointensities required to establish the stable natural remanent magnetization observed in meteorites, are discussed. It is suggested that the record of paleofields present during condensation, growth, and accumulation of grains is likely to have been preserved as chemical or thermochemical remanence in unaltered meteoritic material. Fine particle theories appear adequate for treating meteoritic remanence, if models based on corresponding types of permanent magnet materials, e.g., powder ferrites for chondrites and diffusion hardened alloys for iron meteorites, are adopted.

Brecher, A.↗

Gas-rich meteorites - Possible evidence for origin on a regolith

The asymmetry of irradiation features of grains in the Kapoeta and Fayetteville meteorites suggests irradiation on a regolith before meteorite formation. Chondrules and broken grains require approximately 10,000 years of irradiation time between formation or fracturing and compaction into the meteorite. Shock erasure of tracks from irradiated Kapoeta feldspars requires a severe shock event during or after meteorite formation.

Macdougal, D.↗

Trapped xenon in meteorites

Xenon in meteorites can be resolved into a mixture of component X and trapped xenon with the following composition, Xe-124 : Xe-126 : Xe-128 : Xe-130 : Xe-131 : Xe-132 : Xe-134 : Xe-136 = 0.0276 : 0.0248 : 0.501 : 1.00 : 5.04 : 6.19 : 2.31 : 1.90. This trapped meteoritic xenon is distinct from xenon trapped in the average carbonaceous chondrite which is shown to represent the average composition of the total xenon in meteorites containing various mixtures of component X and trapped meteoritic xenon.

Sabu, D. D.↗

Do stony meteorites come from comets

The solar gas content of stony meteorites is used to determine their place of origin. The inert gas content and surface exposure age of meteorites and lunar regolith samples are compared, and the results suggest that gas implantation took place between 1 and 8 AU from the sun, i.e., in the asteroid belt. The prevalence of gas-rich meteorites is cited to indicate that the parent body must remain in the asteroid belt long enough to develop a substantial regolith, a condition which can be met by asteroids, but not by short period comets. It is concluded that all stony meteorite classes with gas-rich members, including carbonaceous chondrites, originated in asteroidal material.

Anders, E.↗

A meteorite that got away

The mass and brightness are estimated for a meteorite which passed through the atmosphere without touching the ground and was observed over the northwestern part of North America. It is noted that the ultimate mass of a meteorite should be derived from its deceleration and that the ablated mass must also be calculated in order to obtain the initial mass. The deceleration, ablation, and brightness are calculated for the present meteorite on the basis of two composition models: a stony meteorite and a hard cometary dustball. The results suggest that this object probably was a hard cometary dustball.

Opik, E. J.↗

On the calculation of cosmic-ray exposure ages of stone meteorites

Abundances of cosmic ray-produced noble gases and Al-26, including some new measurements, have been compiled for some 23 stone meteorites with exposure ages less than 3,000,000 yr. Concentrations of cosmogenic He, Ne, and Ar in these meteorites have been corrected for differences in target element abundances by normalization to L-chondrite chemistry. Combined noble gas measurements in depth samples of the Keyes and St. Severin chondrites are utilized to derive equations for normalizing the production rates of cosmogenic He-3, Ne-21, and Ar-38 in chondrites to an adopted 'average' shielding. The measured unsaturated AL-26 concentrations and the calculated equilibrium Al-26 for these meteorites are combined to estimate exposure ages. These exposure ages are statistically compared with chemistry- and shielding-corrected concentrations of cosmogenic He, Ne, and Ar to derive absolute production rates for these nuclides, which are found to be roughly 25% higher than production rates used in the past. From these production rates and relative chemical correction factors, production rates for other classes of stone meteorites are derived.

Cressy, P. J., Jr.↗

Evidence for a primordial magnetic field during the meteorite parent body era

Data on 247 meteorites were examined, and a log-log plot of the magnetic moment/gm versus the susceptibility/gm reveals a straight-line relation with a slope of unity for a range of meteorite types extending from achondrites at the low Fe-Ni end to stony-irons. The relation holds for a span of parameter values ranging between four and five orders. The results support the hypothesis of a common background magnetic field at the time of meteorite formation. An equation relating the primordial field strength to the average carrier demagnetization factor, which can vary from 0 to 4 pi, is presented. The extreme lower limit for the field strength is 0.02 oersted, while for the mean field of 0.27 oersted determined from a study of individual meteorites (Stacy and Banerjee, 1974), the average value for the carrier demagnetization factor is 0.74, corresponding to elongated grains.

Sonett, C. P.↗

Infrared /JHK/ photometry of meteorites and asteroids

The paper reports JHK colors observed for ten asteroids and synthesized JHK colors for seven meteorite groups, samples of iron and nickel metal, pyroxene, olivine, feldspar, a lunar anorthite and some terrestrial mineral samples. Pronounced differences are apparent between the chondritic and achondritic meteorite classes; the chondritic classes show less subdued trends in J-H color which reflect their metamorphic grade. We find small but significant differences between the JHK colors of the predominant C and S classes of asteroids. All JHK colors of asteroids observed here fall within the limited domain defined by the various chondritic and iron-rich meteorites but are strikingly different from those of most achondritic meteorites.

Leake, M.↗

Exposure and terrestrial ages of four Allan Hills Antarctic meteorites

Terrestrial ages of meteorites are based on the amount of cosmic-ray-produced radioactivity in the sample and the number of observed falls that have similar cosmic-ray exposure histories. The cosmic-ray exposures are obtained from the stable noble gas isotopes. Noble gas isotopes are measured by high-sensitivity mass spectrometry. In the present study, the noble gas contents were measured in four Allan Hill meteorites (No. 5, No. 6, No. 7, and No. 8), whose C-14, Al-26, and Mn-53 radioactivities are known. These meteorites are of particular interest because they belong to a large assemblage of distinct meteorites that lie exposed on a small (110 sq km) area of ice near the Allan Hills.

Kirsten, T.↗

Conclusions derived from the evidence on accretion in meteorites

A study of the evidence on accretion in meteorites shows that gross chemical features of chondritic meteorite type were established by accretion of materials with characteristic chemical and isotopic compositions. Some meteorites have been subjected to intensive mechanical and/or thermal processes. Mixing has occurred among meteorite types, presumably late in the accretion sequence. From the materials which appear to have escaped substantial modification it can be concluded that the relative velocities between accreting grains varied but in some cases were very low. Accretion took place after most, if not all, of the gaseous components had been separated from the condensed portion of solar matter.

Herndon, J. M.↗