Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Marching Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Participant Assisted Data Collection Methods in the California Healthy Homes Indoor Air Quality Study of 2011-13

From November 2011 to March 2013, air quality was measured over 6-day periods in 324 residences across California using a mail-out strategy. All interactions with study participants, from recruitment, to data collection, to communication of results, were conducted with remote communication methods including conventional mail, electronic mail, telephone and text messaging. Potential participants were reached primarily by sharing study information with community groups and organizations that directed interested individuals to complete an online screening survey. Pollutant concentrations were measured with sampling equipment that was mailed to participants' homes with deployment instructions. Residence and household characteristics and activity data were collected via two phone surveys and an activity log. A comparison of responses to survey questions completed online versus over the phone indicated that a substantial fraction of participants (roughly 20%) required a researcher's assistance to respond to basic questions about appliance characteristics. Using the printed instructions and telephone assistance from researchers, roughly 90% of participants successfully deployed and returned sampling materials accurately and on schedule. The mail-out strategy employed in this study was found to be a cost-effective means for collecting residential air quality data.

54 ENVIRONMENTAL SCIENCES↗

An exploratory study of a finite difference method for calculating unsteady transonic potential flow

A method for calculating transonic flow over steady and oscillating airfoils was developed by Isogai. The full potential equation is solved with a semi-implicit, time-marching, finite difference technique. Steady flow solutions are obtained from time asymptotic solutions for a steady airfoil. Corresponding oscillatory solutions are obtained by initiating an oscillation and marching in time for several cycles until a converged periodic solution is achieved. The method is described in general terms and results for the case of an airfoil with an oscillating flap are presented for Mach numbers 0.500 and 0.875. Although satisfactory results are obtained for some reduced frequencies, it is found that the numerical technique generates spurious oscillations in the indicial response functions and in the variation of the aerodynamic coefficients with reduced frequency. These oscillations are examined with a dynamic data reduction method to evaluate their effects and trends with reduced frequency and Mach number. Further development of the numerical method is needed to eliminate these oscillations.

Bennett, R. M.↗

Unsteady transonic Euler solutions using finite elements

A finite element solution of the unsteady Euler equations is presented and demonstrated for 2D airfoil configurations oscillating in transonic flows. Computations are performed by spatially discretizing the conservation equations using the Galerkin weighted residual method and then employing a multistage Runge-Kutta scheme to march forward in time. A mesh deformation scheme has been developed to efficiently move interior points in a smooth fashion as the airfoil undergoes rigid body pitch and plunge motion. Both steady and unsteady results are presented, and a comparison is made with solutions obtained using finite-volume techniques. The effects of using either a lumped or consistent mass matrix are presented; the finite element method provides an accurate solution for unsteady transonic flows about isolated airfoils.

Davis, Gary A.↗

Design, analysis and preliminary numerical results for the nonconforming VEM for parabolic problems

The virtual element method (VEM) is a numerical methodology for solving partial differential equations on unstructured polytopal meshes. In this work, we extend the nonconforming high-order formulation suitable to time-dependent diffusion problems with possibly nonlinear forcing terms. Coupling high-order virtual element formulations in space with time-marching schemes based on Backward Differention Formulas (BDFs) makes a fully discrete method with optimal order of convergence in the Method of Lines framework. We investigate and assess the performance of the method through theoretical analysis and a set of numerical experiments.

97 MATHEMATICS AND COMPUTING↗

Finite difference methods for transient signal propagation in stratified dispersive media

Explicit difference equations are presented for the solution of a signal of arbitrary waveform propagating in an ohmic dielectric, a cold plasma, a Debye model dielectric, and a Lorentz model dielectric. These difference equations are derived from the governing time-dependent integro-differential equations for the electric fields by a finite difference method. A special difference equation is derived for the grid point at the boundary of two different media. Employing this difference equation, transient signal propagation in an inhomogeneous media can be solved provided that the medium is approximated in a step-wise fashion. The solutions are generated simply by marching on in time. It is concluded that while the classical transform methods will remain useful in certain cases, with the development of the finite difference methods described, an extensive class of problems of transient signal propagating in stratified dispersive media can be effectively solved by numerical methods.

Lam, D. H.↗

An improved version of NCOREL: A computer program for 3-D nonlinear supersonic potential flow computations

A computer code called NCOREL (for Nonconical Relaxation) has been developed to solve for supersonic full potential flows over complex geometries. The method first solves for the conical at the apex and then marches downstream in a spherical coordinate system. Implicit relaxation techniques are used to numerically solve the full potential equation at each subsequent crossflow plane. Many improvements have been made to the original code including more reliable numerics for computing wing-body flows with multiple embedded shocks, inlet flow through simulation, wake model and entropy corrections. Line relaxation or approximate factorization schemes are optionally available. Improved internal grid generation using analytic conformal mappings, supported by a simple geometric Harris wave drag input that was originally developed for panel methods and internal geometry package are some of the new features.

Siclari, Michael J.↗

Solution of Aeroacoustic Problems by a Nonlinear, Hybrid Method

Category 1, problem 3 (scattering of sound by a sphere) and category 2, problem 1 (spherical source in a cylindrical duct subject to uniform flow) are solved in generalized coordinates using the nonlinear Euler equations together with nonreflecting boundary conditions. A temporally and spatially fourth-order accurate finite-difference, Runge-Kutta time-marching technique is employed for the near-field calculations and a Kirchhoff method is employed for the prediction of far-field sound. Computations are all performed on parallel processors using the data-parallel paradigm.

Oezyoeruek, Yusuf↗

Numerical simulation of two-dimensional inlet flowfields

Inlet flowfields for airbreathing missiles are calculated by a two-dimensional computational method. A supersonic freestream is assumed to allow the forebody calculation to be uncoupled from the inlet calculation. The inlet calculation employs an implicit, time-marching, finite difference procedure to solve the Euler equations formulated in body-fitted coordinates. The method can be used for a flowfield with both subsonic and supersonic regions and is found to converge rapidly for supercritical inlet operation. For subcritical inlet operation, however, convergence to steady state is slow.

Biringen, S.↗

Numerical schemes for dynamically orthogonal equations of stochastic fluid and ocean flows

The quantification of uncertainties is critical when systems are nonlinear and have uncertain terms in their governing equations or are constrained by limited knowledge of initial and boundary conditions. Such situations are common in multiscale, intermittent and non-homogeneous fluid and ocean flows. The dynamically orthogonal (DO) field equations provide an adaptive methodology to predict the probability density functions of such flows. The present work derives efficient computational schemes for the DO methodology applied to unsteady stochastic Navier-Stokes and Boussinesq equations, and illustrates and studies the numerical aspects of these schemes. Semi-implicit projection methods are developed for the mean and for the DO modes, and time-marching schemes of first to fourth order are used for the stochastic coefficients. Conservative second-order finite-volumes are employed in physical space with new advection schemes based on total variation diminishing methods. Other results include: (i) the definition of pseudo-stochastic pressures to obtain a number of pressure equations that is linear in the subspace size instead of quadratic; (ii) symmetric advection schemes for the stochastic velocities; (iii) the use of generalized inversion to deal with singular subspace covariances or deterministic modes; and (iv) schemes to maintain orthonormal modes at the numerical level. To verify our implementation and study the properties of our schemes and their variations, a set of stochastic flow benchmarks are defined including asymmetric Dirac and symmetric lock-exchange flows, lid-driven cavity flows, and flows past objects in a confined channel. Different Reynolds number and Grashof number regimes are employed to illustrate robustness. Optimal convergence under both time and space refinements is shown as well as the convergence of the probability density functions with the number of stochastic realizations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An implicit marching procedure for the treatment of supersonic flow fields using the conservative full potential equation

A new aerodynamic prediction technique based on the conservative full potential equation is developed for the treatment of supersonic flow fields. This new technique bridges the gap between simplistic linear theory methods and complex Euler solvers. A novel local density linearization concept and a second order accurate retarded density scheme, both producing the correct artificial viscosity, are introduced in developing an implicit marching scheme for solving the scalar phi. The method produces results that compare well with Euler solvers and requires an order of magnitude less computer time and significantly less computer memory over existing nonlinear codes. The scalar phi formulation can be extended to handle subsonic pockets in the marching direction and also is suitable for developing inverse procedures where the shape corresponding to a prescribed loading is sought.

Shankar, V.↗

Palliative Prostate Artery Embolization for Prostate Cancer: A Case Series

Introduction: Prostate artery embolization (PAE) is recognized as a treatment for lower urinary tract symptoms (LUTS) in men with benign prostatic hyperplasia. LUTS and urinary retention are common in men with prostate cancer (PCa). The purpose of this study was to estimate the efficacy and safety of palliative PAE on LUTS or urinary retention in men with advanced PCa. Materials and methods: This prospective, single-center trial was conducted from March 2017 to November 2018. The trial protocol was registered online (ClinicalTrials.gov Identifier: NCT03104907). Only men with advanced PCa suffering from LUTS or urinary retention were included. The primary outcome was the ability to void without a catheter and International Prostate Symptom Score (IPSS) in non-catheter-dependent patients. The paired t test was used to analyze changes from baseline with 95% confidence intervals (CI). A p value < 0.05 was considered statistically significant. Results: Seventeen patients were assessed for eligibility, and 15 patients with a mean age of 73.8 years were enrolled. Four men did not complete follow-up: cancer-related death (n = 2), lost to follow-up (n = 1), and unsuccessful embolization due to severe atherosclerosis (n = 1). Bilateral embolization was achieved in ten cases, and urinary retention resolved in one of six patients. LUTS improved in the remaining (n = 5) patients by a mean 12.2-point reduction in IPSS (95% CI − 23.53; − 0.87). According to the CIRSE classification, two grade 1 and two grade 3 complications occurred. Conclusion: In this study, palliative PAE was safe and efficient for treatment for LUTS associated with PCa. Level of Evidence: Level 4, Case Series. Trial registration ClinicalTrials.gov Identifier: NCT03104907.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

New insights into the physical nature of coronal mass ejections and associated shock waves within the framework of the three-dimensional structure

We present new insights into the physical nature of coronal mass ejections (CMEs) and associated shock waves within the framework of the three-dimensional (3D) structure. We have developed a compound model in order to determine the 3D structure of multiple fronts composing a CME, using data sets taken from STEREO, SDO, and SOHO. We applied the method to time series observations of a CME on 2012 March 7. From the analyses, we revealed that a CME could consist of two different fronts: one is represented well with the ellipsoid model, implying that CMEs are bubble-shaped structures, and the other is reproduced well with the graduated cylindrical shell model, indicating that CMEs are flux rope-shaped structures. The bubble-shaped structure is seen as the outermost front of the CME, and the flux rope-shaped structure is seen as the bright frontal loop or three-part morphology. From our results, we conclude that (1) a CME could consist of two distinct structures, a bubble-shaped structure and a flux rope-shaped structure, (2) the bubble-shaped structure is a fast magnetosonic shock wave, while the flux rope-shaped structure is the mass carried outward by the underlying magnetic structure, (3) the driven shock front could be either a piston-shock type or a bow-shock type, (4) the observed EUV wave in the low corona is the footprint of the bubble-shaped wave, and (5) the halo CME is primarily the projection of the bubble-shaped shock wave but not the underlying flux rope.

79 ASTRONOMY AND ASTROPHYSICS↗

AVE/VAS 3: 25-mb sounding data

The rawinsonde sounding program for the AVE/VAS 3 experiment is described. Tabulated data are presented at 25-mb intervals for the 24 National Weather Service stations and 14 special stations participating in the experiment. Soundings were taken at 3-hr intervals, beginning at 1200 GMT on March 27, 1982, and ending at 0600 GMT on March 28, 1982 (7 sounding times). An additional sounding was taken at the National Weather Service stations at 1200 GMT on March 28, 1982, at the normal synoptic observation time. The method of processing soundings is briefly discussed, estimates of the RMS errors in the data are presented, and an example of contact data is given. Termination pressures of soundings taken in the mesos-beta-scale network are tabulated, as are observations of ground temperature at a depth of 2 cm.

Sienkiewicz, M. E.↗

Multi-Wavelength Analysis of the March 26, 1991: Solar Flare

We have engaged in detailed multi-wavelength analysis of the March 26, 1991, solar flare in order to develop a method of diagnostics of the physical processes responsible for the efficient acceleration of charged particles to high energies and also for diagnostics of the photospheric response to the injection of the accelerated particles. Consideration of this particular flare is of special interest because to date it is the only flare in which the gamma-ray emission with energies of 20-1000 MeV was registered throughout the entire development of the event in the optical, radio and soft x-ray bands. individual registration by the GAMMA-1 telescope of the energy and precise time for each registered gamma-ray photon allowed the maximum detailed investigation of the energy spectrum and flux evolution during the flare.

Kurt, V. G.↗

Supersonic Quadrupole Noise Theory for High-Speed Helicopter Rotors

High-speed helicopter rotor impulsive noise prediction is an important problem of aeroacoustics. The deterministic quadrupoles have been shown to contribute significantly to high-speed impulsive (HSI) noise of rotors, particularly when the phenomenon of delocalization occurs. At high rotor-tip speeds, some of the quadrupole sources lie outside the sonic circle and move at supersonic speed. Brentner has given a formulation suitable for efficient prediction of quadrupole noise inside the sonic circle. In this paper, we give a simple formulation based on the acoustic analogy that is valid for both subsonic and supersonic quadrupole noise prediction. Like the formulation of Brentner, the model is exact for an observer in the far field and in the rotor plane and is approximate elsewhere. We give the full analytic derivation of this formulation in the paper. We present the method of implementation on a computer for supersonic quadrupoles using marching cubes for constructing the influence surface (Sigma surface) of an observer space- time variable (x; t). We then present several examples of noise prediction for both subsonic and supersonic quadrupoles. It is shown that in the case of transonic flow over rotor blades, the inclusion of the supersonic quadrupoles improves the prediction of the acoustic pressure signature. We show the equivalence of the new formulation to that of Brentner for subsonic quadrupoles. It is shown that the regions of high quadrupole source strength are primarily produced by the shock surface and the flow over the leading edge of the rotor. The primary role of the supersonic quadrupoles is to increase the width of a strong acoustic signal.

Farassat, F.↗

Vessel network detection using contour evolution and color components

Automated retinal screening relies on vasculature segmentation before the identification of other anatomical structures of the retina. Vasculature extraction can also be input to image quality ranking, neovascularization detection and image registration, among other applications. There is an extensive literature related to this problem, often excluding the inherent heterogeneity of ophthalmic clinical images. The contribution of this paper relies on an algorithm using front propagation to segment the vessel network. The algorithm includes a penalty in the wait queue on the fast marching heap to minimize leakage of the evolving interface. The method requires no manual labeling, a minimum number of parameters and it is capable of segmenting color ocular fundus images in real scenarios, where multi-ethnicity and brightness variations are parts of the problem.

59 BASIC BIOLOGICAL SCIENCES↗

A comparison of artificial compressibility and fractional step methods for incompressible flow computations

We have applied and compared the efficiency and accuracy of two commonly used numerical methods for the solution of Navier-Stokes equations. The artificial compressibility method augments the continuity equation with a transient pressure term and allows one to solve the modified equations as a coupled system. Due to its implicit nature, one can have the luxury of taking a large temporal integration step at the expense of higher memory requirement and larger operation counts per step. Meanwhile, the fractional step method splits the Navier-Stokes equations into a sequence of differential operators and integrates them in multiple steps. The memory requirement and operation count per time step are low, however, the restriction on the size of time marching step is more severe. To explore the strengths and weaknesses of these two methods, we used them for the computation of a two-dimensional driven cavity flow with Reynolds number of 100 and 1000, respectively. Three grid sizes, 41 x 41, 81 x 81, and 161 x 161 were used. The computations were considered after the L2-norm of the change of the dependent variables in two consecutive time steps has fallen below 10(exp -5).

Chan, Daniel C.↗

Estimation of average burnup of damaged fuels loaded in Fukushima Dai-ichi reactors by using the {sup 134}Cs/{sup 137}Cs ratio method

Average burnup of damaged fuels loaded in Fukushima Dai-ichi reactors is estimated, using the {sup 134}Cs/{sup 137}Cs ratio method for measured radioactivities of {sup 134}Cs and {sup 137}Cs in contaminated soils within the range of 100 km from the Fukushima Dai-ichi nuclear power plants. As a result, the measured {sup 134}Cs/{sup 137}Cs ratio from the contaminated soil is 0.996{+-}0.07 as of March 11, 2011. Based on the {sup 134}Cs/{sup 137}Cs ratio method, the estimated burnup of damaged fuels is approximately 17.2{+-}1.5 [GWd/tHM]. It is noted that the numerical results of various calculation codes (SRAC2006/PIJ, SCALE6.0/TRITON, and MVP-BURN) are almost the same evaluation values of {sup 134}Cs/ {sup 137}Cs ratio with same evaluated nuclear data library (ENDF-B/VII.0). The void fraction effect in depletion calculation has a major impact on {sup 134}Cs/{sup 137}Cs ratio compared with the differences between JENDL-4.0 and ENDF-B/VII.0. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗