Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

A Brownian dynamics study on ferrofluid colloidal dispersions using an iterative constraint method to satisfy Maxwell’s equations

Ferrofluids are often favored for their ability to be remotely positioned via external magnetic fields. The behavior of particles in ferromagnetic clusters under uniformly applied magnetic fields has been computationally simulated using the Brownian dynamics, Stokesian dynamics, and Monte Carlo methods. However, few methods have been established that effectively handle the basic principles of magnetic materials, namely, Maxwell’s equations. An iterative constraint method was developed to satisfy Maxwell’s equations when a uniform magnetic field is imposed on ferrofluids in a heterogeneous Brownian dynamics simulation that examines the impact of ferromagnetic clusters in a mesoscale particle collection. This was accomplished by allowing a particulate system in a simple shear flow to advance by a time step under a uniformly applied magnetic field, then adjusting the ferroparticles via an iterative constraint method applied over sub-volume length scales until Maxwell’s equations were satisfied. The resultant ferrofluid model with constraints demonstrates that the magnetoviscosity contribution is not as substantial when compared to homogeneous simulations that assume the material’s magnetism is a direct response to the external magnetic field. This was detected across varying intensities of particle-particle interaction, Brownian motion, and shear flow. Ferroparticle aggregation was still extensively present but less so than typically observed.

42 ENGINEERING↗

Temperature and concentration dependent magnetic properties of epitaxial Fe{sub 1−x}Cr{sub x}-alloy films in the high Cr-concentration regime

Soft magnetic materials with a Curie temperature (T{sub c}) close to room temperature are suitable candidates for device applications and for more fundamental aspects of magnetism. Promising candidates are Fe{sub 1−x}Cr{sub x}-alloys with a Fe concentration of about 25%–35%. We have grown by molecular beam epitaxy methods a number of epitaxial Fe{sub 1−x}Cr{sub x} alloys on MgO[100] and MgO[110] substrates, and we report on their structural and magnetic properties in this concentration range, including the dependence of the Curie temperature (T{sub c}) on the concentration, the magnetocrystalline anisotropy, and the development of the magnetic moment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Specific absorption rate calculations of magnetite, using a modified linear response model for applications in magnetic hyperthermia

Currently the absorption of electromagnetic radiation by magnetic nanoparticles is studied for biomedical applications of cancer thermotherapy. Several experiments are conduced following the framework of the Rosensweig model, in order to estimate their specific absorption rate. Nevertheless, this linear approximation involves strong simplifications which constrain their accuracy and validity range. The main aim of this work is to incorporate the deviation of the sphericity assumption in particles shapes, to improve the determination of their specific absorption rate. The correction to the effective particles volume is computed as a measure of the apparent amount of magnetic material, interacting with the external AC magnetic field. Preliminary results using the physical properties of Fe3O4 nanoparticles, exhibit an important correction in their estimated specific absorption rate, as a function of the apparent mean particles radius. Indeed, we have observed using a small deviation (6% of the apparent radius), up to 40% of the predicted specific absorption rate by the Rosensweig linear approximation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

REACT: Alternatives to Critical Materials in Magnets

REACT Project: The 14 projects that comprise ARPA-E’s REACT Project, short for “Rare Earth Alternatives in Critical Technologies”, are developing cost-effective alternatives to rare earths, the naturally occurring minerals with unique magnetic properties that are used in electric vehicle (EV) motors and wind generators. The REACT projects will identify low-cost and abundant replacement materials for rare earths while encouraging existing technologies to use them more efficiently. These alternatives would facilitate the widespread use of EVs and wind power, drastically reducing the amount of greenhouse gases released into the atmosphere.

ARPA-E↗

Enhancement of charge-neutral fermionic excitations near the spin-flop transition in the magnetic Kondo material YbIr 3 Si 7

The new Kondo material YbIr 3 Si 7 , similar to other Kondo insulators, has been reported to exhibit charge-neutral fermionic excitations through measurements of specific heat and thermal conductivity at low temperatures. We performed 29 Si-NMR on YbIr 3 Si 7 to investigate the magnetic response of charge-neutral fermions from a microscopic perspective. In low magnetic fields parallel to the c axis, a single NMR peak in the paramagnetic state splits into three peaks below TN. In contrast, only a slight shift of the single NMR peak was observed in high magnetic fields. This spectral change as a function of the c-axis magnetic field is interpreted as a spin-flop transition, at which the magnetic moments oriented along the c axis antiferromagnetic (AFM-I) phase are rotated to the ab plane with a ferromagnetic component along the c-axis (AFM-II phase). In the vicinity of the spin-flop magnetic field H M , the nuclear spin-lattice relaxation rate 1/T 1 was found to be proportional to temperature at low temperatures, indicating the existence of charge-neutral fermions. Furthermore, a peak of 1/T 1 versus the c-axis magnetic field suggests that the charge-neutral fermions in YbIr 3 Si 7 are closely related to its magnetic properties. Our findings shed light on the origin of charge-neutral fermions in insulators.

36 MATERIALS SCIENCE↗

Enhancement of Curie temperature in Mn{sub 2}RuSn by Co substitution

The Co-substituted Mn{sub 2}RuSn nanomaterials, namely, Mn{sub 2}Ru{sub 0.5}Co{sub 0.5}Sn and Mn{sub 2}Ru{sub 0.35}Co{sub 0.65}Sn have been synthesized and investigated. The presence of Co in the Mn{sub 2}RuSn (a = 6.21 Å) decreased the lattice parameter, where a = 6.14 Å and 6.12 Å for the as prepared Mn{sub 2}Ru{sub 0.5}Co{sub 0.5}Sn and Mn{sub 2}Ru{sub 0.35}Co{sub 0.65}Sn, respectively. The samples show a ferrimagnetic spin order with relatively small coercivities, similar to those of soft magnetic materials. There is a substantial increase in the Curie temperature (T{sub c} = 448 K for Mn{sub 2}Ru{sub 0.5}Co{sub 0.5}Sn and 506 K for Mn{sub 2}Ru{sub 0.35}Co{sub 0.65}Sn) of Mn{sub 2}RuSn (T{sub c} = 272.1 K) due to Co substitution, which is a result of strengthening of the positive exchange interaction in this material. These materials are highly stable against heat treatment of up to 450 °C. The first-principles calculations are consistent with our experimentally observed structural and magnetic properties. They also provide insight on how the magnetic and electronic structures change when Ru is replaced with Co in Mn{sub 2}RuSn.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nickel-cobalt alloy nanosheets obtained from reductive hydrothermal-treatment of nickel-cobalt hydroxide carbonate

Highlights: Black-Right-Pointing-Pointer An anionic layered material, nickel-cobalt hydroxide carbonate was synthesized. Black-Right-Pointing-Pointer Reductive hydrothermal-treatment of the layered precursor produced an alloy. Black-Right-Pointing-Pointer The alloy is a bimetallic nanostructured nickel-cobalt and a soft magnet material. -- Abstract: Nickel-cobalt hydroxide carbonate, a layered material was synthesized by the co-precipitation method using urea as precipitant agent. This anionic layered material with hexagonal structure is constructed from nickel and cobalt ions within the layers and carbonate anions between the layers. Nickel-cobalt alloy with pure cubic phase was obtained by a reductive hydrothermal-treatment of the layered precursor. Powder X-ray diffraction pattern and Fourier transform infrared spectroscopy confirmed the formation of the initial layered material and its metallic alloy product. That is, the nickel-cobalt alloy has really produced via a wet chemical route for the first time. Magnetic measurement revealed that the alloy sample is a soft magnet material.

36 MATERIALS SCIENCE↗

Developing bulk exchange spring magnets

A method of making a bulk exchange spring magnet by providing a magnetically soft material, providing a hard magnetic material, and producing a composite of said magnetically soft material and said hard magnetic material to make the bulk exchange spring magnet. The step of producing a composite of magnetically soft material and hard magnetic material is accomplished by electrophoretic deposition of the magnetically soft material and the hard magnetic material to make the bulk exchange spring magnet.

25 ENERGY STORAGE↗

The effects of Co-Ti co-doping on the magnetic, electrical, and magnetodielectric behaviors of M-type barium hexaferrites

Magnetic, electrical and magnetodielectric properties have been studied in Co-Ti co-doped M-type hexaferrite BaCo{sub x}Ti{sub x}Fe{sub 12-2x}O{sub 19} (x = 0 ∼ 4). With the incorporation of Co-Ti, both their ferromagnetic magnetization and coercivity have been greatly changed. The temperature dependent magnetization curve shows a apparent hump at around 420 K, likely in association with more complicated cycloidal spin ordering, which is closely related to ferroelectric polarization. Interestingly, a significantly enhancement in resistivity (∼3 orders in magnitude) can be obtained in co-doped samples (x > 2), which is beneficial for magnetoelectric properties. The magnetoelectric effect were examined by dielectric tunibility under external magnetic field, which shows apparent tunability up to ∼−3% for sample with x = 2 at 1T magnetic field, further supporting it is a room temperature single phase mutliferroic material.

36 MATERIALS SCIENCE↗

Conceptual Design and Performance Considerations for Superconducting Magnets in the Material Plasma Exposure eXperiment

An important step toward the advent of nuclear fusion as a future power source is the development of plasmafacing materials that can function as designed for a long period of time. While ITER and other devices including Wendelstein 7-X and the Joint European Torus will provide insight into divertor and first wall performance, a dedicated device to advance the understanding of material performance in the representative plasma environments is needed. The Material Plasma Exposure eXperiment has been proposed as a linear plasma device to generate and to direct fusion reactor-like plasma energy and particle flux at the target materials with electron temperatures of 1-15 eV and electron densities of 10 20 -10 21 m -3 . Given that the requirements for radio frequency (RF) heating on-axis field are no greater than 2.5 T and the warm bore diameters must be between 60 cm and 1.5 m, the conceptual design was developed for the experiments on a set of superconducting magnets carried out using commercially available NbTi superconductors. This conceptual design evaluated the cryogenic heat loads, mechanical loads, and quench protection to ensure that the current design is compatible with current technologies. In addition, an alternative evaluation of this design relative to ReBCO high-temperature superconducting magnets determined the conditions under which these technologies could be advantageous.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

PowerChip: Advanced Technologies for Integrated Power Electronics

To realize advances in power conversion technology, the research project investigated three areas: 1) new power semiconductor devices; 2) new magnetic materials and component designs; and 3) new circuit architectures and topologies to realize higher degrees of miniaturization, integration and performance. The application focus was on power converters for driving LED loads, encompassing ac-to-dc and dc-to-dc conversion from moderate voltage levels (to above 100 V) to low voltages (e.g., tens of Volts) at low to moderate operating power levels (e.g., tens of Watts). Semiconductor device research focused on the performance, reliability and improved design of devices based on Gallium Nitride (GaN). Magnetics research focused on both development of new magnetic materials suitable to higher operating frequencies and on microfabrication of magnetic components. Systems research focused on leveraging these advances to attain higher operating frequencies, miniaturization and performance as compared to the present state of the art.

Perreault, David↗

Pressure-induced sequential orbital reorientation in a magnetic framework material.

Pressure has been applied to manipulate the structure-property relationship of the copper(II)-based coordination network CuF{sub 2}(H{sub 2}O){sub 2}(pyz) (pyz=pyrazine). The elongated Jahn-Teller axis was found to switch sequentially from the NCuN (<0.9 GPa), to the O-Cu-O (0.9-3.1 GPa), to the F-Cu-F bonds (>3.1 GPa; see picture). This orbital reordering leads to a drastic change in the magnetic properties, whereby the magnetic structure changes from two-dimensional to one-dimensional above 0.9 GPa.

36 MATERIALS SCIENCE↗

Higher Order Suppressor (HOS) for the PolLux Microspectroscope Beamline at the Swiss Light Source SLS

The mechanical design and performance of a device to suppress higher orders of a spherical grating monochromator at a constant deviation angle is described. The higher order suppressor (HOS) is used for a scanning transmission x-ray microspectroscope beamline (PolLux) at a bending magnet of the Swiss Light Source (SLS). The instruments allow microspectroscopy in polymer science, of biological samples in the water window as well as the study of magnetic materials with circular or linear polarized light in a photon energy range of 200 eV to 1400 eV. The HOS uses three mirrors acting as a low pass filter for soft x-rays to improve the absorption spectroscopy of carbon, oxygen and nitrogen 1s core levels. The successful installation and operation of the HOS located after the monochromator is reported. First results obtained using samples from materials research and environmental sciences exemplify the improved spectroscopy capabilities of the instrument.

43 PARTICLE ACCELERATORS↗

Constant permeability of (Fe{sub 0.75}B{sub 0.20}Si{sub 0.05}){sub 96}Nb{sub 4} bulk metallic glass prepared by B{sub 2}O{sub 3} flux melting and Cu-mold casting

The effect of B{sub 2}O{sub 3} flux melting on the soft magnetic properties of (Fe{sub 0.75}B{sub 0.20}Si{sub 0.05}){sub 96}Nb{sub 4} bulk metallic glass prepared by casting has been investigated. Ring-shaped bulk specimens that were prepared by B{sub 2}O{sub 3} flux melting and Cu-mold casting (fluxed specimens) show a flat hysteresis curve, indicating a good linear relationship between the magnetic induction and the applied magnetic field. Although the permeability of the fluxed specimens is lower than that of the specimens prepared by conventional Cu-mold casting by one order of magnitude, their coercivities are almost same. These results show that it is possible to develop a new soft magnetic material that exhibits constant permeability with low core loss.

36 MATERIALS SCIENCE↗

Methods of recovering rare earth elements

A method of recovering a rare earth element. The method comprises dissolving a rare earth element magnetic material in a dissolution organic solvent and a β-diketone compound to form a dissolved rare earth element mixture. A rare earth element of the rare earth element magnetic material and the β-diketone compound are reacted to form a β-diketonate chelate complex and the dissolution organic solvent is removed. The β-diketonate chelate complex is removed using a separation organic solvent, and the β-diketonate chelate complex is recovered. Additional methods are also disclosed.

Klaehn, John R.↗

Permanent Magnet Resiliency in Jefferson Lab’s Radiation Environment: LDRD Grant Status and Plans

As the FFA@CEBAF energy upgrade study progresses, it is important to investigate the impact of radiation exposure on the permanent magnet materials to be used in the upgraded fixed field alternating gradient (FFA) arcs. To address this, Jefferson Lab has awarded a Laboratory Directed Research and Development (LDRD) grant to study the resiliency of several permanent magnet materials placed in a radiation environment similar to that in which they are expected to operate. Samples of NeFeB and SmCo are to be placed alongside appropriate dosimetry in a variety of radiation environments in the beam enclosure and experimental halls at CEBAF. The magnet degradation will be measured, and extrapolated to the higher energies expected during operations after the energy upgrade. This document will describe the current status of the LDRD study, as well as describe the upcoming plans. It will also direct the readers to other proceedings which further detail the work thus far.

Bodenstein, R.↗

Dissociating the phononic, magnetic and electronic contributions to thermal conductivity: a computational study in alpha-iron

Computational tools to study thermodynamic properties of magnetic materials have, until recently, been limited to phenomenological modeling or to small domain sizes limiting our mechanistic understanding of thermal transport in ferromagnets. Herein, we study the interplay of phonon and magnetic spin contributions to the thermal conductivity in a-iron utilizing non-equilibrium molecular dynamics simulations. It was observed that the magnetic spin contribution to the total thermal conductivity exceeds lattice transport for temperatures up to two-thirds of the Curie temperature after which only strongly coupled magnon-phonon modes become active heat carriers. Characterizations of the phonon and magnon spectra give a detailed insight into the coupling between these heat carriers, and the temperature sensitivity of these coupled systems. Comparisons to both experiments and ab initio data support our inferred electronic thermal conductivity, supporting the coupled molecular dynamics/spin dynamics framework as a viable method to extend the predictive capability for magnetic material properties.

36 MATERIALS SCIENCE↗

Zero-bias conductance peaks at zero applied magnetic field due to stray fields from integrated micromagnets in hybrid nanowire quantum dots

Many recipes for realizing topological superconductivity rely on broken time-reversal symmetry, which is often attained by applying a substantial external magnetic field. Alternatively, using magnetic materials can offer advantages through low-field operation and design flexibility on the nanoscale. Mechanisms for lifting spin degeneracy include exchange coupling, spin-dependent scattering, spin injection – all requiring direct contact between the bulk or induced superconductor and a magnetic material. Here, we implement locally broken time-reversal symmetry through dipolar coupling from nearby micromagnets to superconductor-semiconductor hybrid nanowire devices. Josephson supercurrent is hysteretic due to micromagnets switching. At or around zero external magnetic field, we observe an extended presence of Andreev bound states near zero voltage bias. We also show a zero-bias peak plateau of a non-quantized value. Our findings largely reproduce earlier results where similar effects were presented in the context of topological superconductivity in a homogeneous wire, and attributed to more exotic time-reversal breaking mechanisms [Nat. Phys. 17, 43 (2020)]. In contrast, our stray field profiles are not designed to create Majorana modes, and our data are compatible with a straightforward interpretation in terms of trivial states in quantum dots. At the same time, the use of micromagnets in hybrid superconductor-semiconductor devices shows promise for future experiments on topological superconductivity.

Jiang, Luyao [Univ. of Pittsburgh, PA (United Stat↗