Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNESIUM COMPOUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Near-UV and blue wavelength excitable Mg{sub 0.6}Ca{sub 2.16}Mo{sub 0.2}W{sub 0.8}O{sub 6}: Eu{sub 0.12}{sup 3+}/Na{sub 0.12}{sup +} high efficiency red phosphors

Red phosphors with narrow emission around 615 nm (with FWHM~5–10 nm) having chemical compositions of A{sub 0.6}Ca{sub 2.16}Mo{sub 0.2}W{sub 0.8}O{sub 6}: Eu{sub 0.12}{sup 3+}/Na{sub 0.12}{sup +} (A=Mg, Sr) have been found to exhibit the highest luminescence amongst the molybdate–tungstate family when excited by sources in the 380–420 nm wavelength range. Thus they are most suitable for enhancing color rendering index and lowering color temperature in phosphor converted white LEDs (pc-WLEDs) with near-UV/blue LED excitation sources. The excitation band edge in the near UV/blue wavelength in the reported phosphor has been attributed to the coordination environment of the transition metal ion (Mo{sup 6+}, W{sup 6+}) and host crystal structure. Furthermore the quantum efficiency of the phosphors has been enhanced by adjusting activator concentration, suitable compositional alloying using substitutional alkaline earth metal cations and charge compensation mechanisms. - Graphical abstract: The charge transfer excitation of orthorhombic Mg{sub 0.6}Ca{sub 2.16}Mo{sub 0.2}W{sub 0.8}O{sub 6}: Eu{sub 0.12}{sup 3+}/Na{sub 0.12}{sup +} is significantly higher than tetragonal CaMoO{sub 4}: Eu{sup 3+} phosphors making Mg{sub 0.6}Ca{sub 2.16}Mo{sub 0.2}W{sub 0.8}O{sub 6}: Eu{sub 0.12}{sup 3+}/Na{sub 0.12}{sup +} prime candidates for fabrication of warm white phosphor-converted LEDs. - Highlights: • LED excitable Mg{sub 0.6}Ca{sub 2.16}Mo{sub 0.2}W{sub 0.8}O{sub 6}: Eu{sub 0.12}{sup 3+}/Na{sub 0.12}{sup +} phosphors were synthesized. • These phosphors are 10 times more intense than CaMoO{sub 4}: Eu{sup 3+} red phosphors. • Their intensity and efficiency were enhanced by materials optimization techniques. • Such techniques include compositional alloying, charge compensation, etc.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic and structural properties of NaLnMnWO{sub 6} and NaLnMgWO{sub 6} perovskites

We have prepared 14 new AA'BB'O{sub 6} perovskites which possess a rock salt ordering of the B-site cations and a layered ordering of the A-site cations. The compositions obtained are NaLnMnWO{sub 6} (Ln=Ce, Pr, Sm, Gd, Dy, and Ho) and NaLnMgWO{sub 6} (Ln=Ce, Pr, Sm, Eu, Gd, Tb, Dy, and Ho). The samples were structurally characterized by powder X-ray diffraction which has revealed metrically tetragonal lattice parameters for compositions with Ln=Ce, Pr and monoclinic symmetry for compositions with smaller lanthanides. Magnetic susceptibility vs. temperature measurements have found that all six NaLnMnWO{sub 6} compounds undergo antiferromagnetic ordering at temperatures between 10 and 13 K. Several compounds show signs of a second magnetic phase transition. One sample, NaPrMnWO{sub 6}, appears to pass through at least three magnetic phase transitions within a narrow temperature range. All eight NaLnMgWO{sub 6} compounds remain paramagnetic down to 2 K revealing that the ordering of the Ln{sup 3+} cations in the NaLnMnWO{sub 6} compounds is induced by the ordering of the Mn{sup 2+} sub-lattice. - Graphical abstract: Evidence for multiple magnetic phase transitions in the A and B-site ordered perovskite NaPrMnWO{sub 6}.

36 MATERIALS SCIENCE↗

Positive effect of Sc and Zr on globular microstructure formation in AA7075 thixoforming feedstock

One of methods of obtaining a fine globular microstructure in a semi-solid range, necessary for thixoforming process, is modifiers additions. For this purpose 0.5 weight percent of modifying elements-scandium and zirconium-was added to 7075 alloy. The microstructure of such alloy consisted of homogeneously distributed globular grains of solid solution with the following chemical composition: Mg - 1.9%, Al - 91.6%, Cu - 1.0%, Zn - 5.5%(all in wt.%). Quantitative metallographic analysis showed that the average grain size was 23.5 {mu}m, much smaller than in the alloy without additions and 3.08% volume fraction of precipitates in the form of a layer between spherical {alpha}(Al) grains. X-ray phase analysis of the 7075 alloy with Sc and Zr additions confirmed the dominant presence of aluminum solid solution and the intermetallic hexagonal phase MgZn{sub 2}. Electron diffraction pattern confirmed location of {eta}MgZn{sub 2} phase at the grain boundaries. EDS chemical analysis of the {eta}MgZn{sub 2} phase showed following content of elements: Mg - 17.2%, Al - 20.4%, Cu - 27.8%, Zn - 34.6%. The larger amount of Cu and Al indicated non-stoichiometry of the {eta} phase, which can be presented with a formula [Mg(Zn,Al,Cu){sub 2}]. Additionally, inside the aluminum solution, small, square-shaped precipitations enriched with Sc and Zr were observed. Electron diffraction pattern allowed identification of the precipitates as cubic Al{sub 3}(Sc,Zr) phase. The average hardness of feedstock was 105 HV5. DSC analysis during heating of the alloy enabled the estimation of a solidus line, at temperature of 548 deg. C and a liquidus line at temperature: 656 deg. C. For cooling, the temperatures for solidus and liquidus were 545 deg. C and 636 deg. C respectively. Additionally, the relation of liquid phase as a function of temperature was determined. Measurements of rheological properties in the semi-solid range, using the Searl system indicated that an increase of a particle size leads to an observable decrease of viscosity during isothermal shearing.

36 MATERIALS SCIENCE↗

Characterization of Friction Stir Welded Tubes by Means of Tube Bulge Test

Mechanical properties of friction stir welded joints are generally evaluated by means of conventional tensile test. This testing method might provide insufficient information because maximum strain obtained in tensile test before necking is small; moreover, the application of tensile test is limited when the joint path is not linear or even when the welds are executed on curved surfaces. Therefore, in some cases, it would be preferable to obtain the joints properties from other testing methods. Tube bulge test can be a valid solution for testing circumferential or longitudinal welds executed on tubular workpieces. The present work investigates the mechanical properties and the formability of friction stir welded tubes by means of tube bulge tests. The experimental campaign was performed on tubular specimens having a thickness of 3 mm and an external diameter of 40 mm, obtained starting from two semi-tubes longitudinally friction stir welded. The first step, regarding the fabrication of tubes, was performed combining a conventional forming process and friction stir welding. Sheets in Al-Mg-Si-Cu alloy AA6060 T6 were adopted for this purpose. Plates having a dimension of 225x60 mm were bent (with a bending axis parallel to the main dimension) in order to obtain semi-tubes. A particular care was devoted to the fabrication of forming devices (punch and die) in order to minimize the springback effects. Semi-tubes were then friction stir welded by means of a CNC machine tool. Some preliminary tests were carried out by varying the welding parameters, namely feed rate and rotational speed. A very simple tool having flat shoulder and cylindrical pin was used. The second step of the research was based on testing the welded tubes by means of tube bulge test. A specific equipment having axial actuators with a conical shape was adopted for this study. Some analyses were carried out on the tubes bulged up to a certain pressure level. In particular, the burst pressure and the wall thickness were measured for each tested tube.

36 MATERIALS SCIENCE↗

Study of Mössbauer and magnetic properties of Al{sup 3+} ions doped superparamagnetic nano ferrites

Nanocrystalline Al{sup 3+} ions doped Mg{sub 0.2}Mn{sub 0.5}Ni{sub 0.3}Al{sub y}Fe{sub 2-y}O{sub 4} compositions, where y=0.0 and 0.10 have been synthesized by citrate precursor method. Crystal structure and magnetic properties have been investigated at room temperature by means of X-ray diffraction, TEM, LCR meter, VSM and Mössbauer spectroscopy. Particle size and lattice parameter has been found to decrease as non-magnetic Al content increased. Relative loss factor has very low value in range of 10{sup −6}–10{sup −5} which is three orders of magnitude less than samples prepared by conventional method. The Mössbauer spectroscopy results shows superparamagnetism. The isomer shift corresponding to Fe{sup 3+} ions do not show any significant variation which indicates that replacement of Fe{sup 3+} ions do not affect significantly the d-electrons density which in turn affects the s-electrons density around Fe{sup 3+} nuclei. The nuclear hyperfine magnetic fields have been found to decrease at A-site and B-site with increasing substitution of Al{sup 3+} ions in Mg-Mn-Ni ferrite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and dielectric behavior of chromium substituted Co-Mg ferrite nanoparticles

The chromium doped Co-Mg ferrite with composition Co{sub 0.5}Mg{sub 0.5}Cr{sub 0.2}Fe{sub 1.8}O{sub 4} has been synthesized using sol-gel auto combustion method. The crystal structure has been analyzed by X-ray diffraction (XRD) technique. XRD pattern reveals the formation of single phase cubic spinel structure. The magnetic measurements show ferromagnetic behavior at room temperature and large coercivity is observed on cooling down the temperature to 20 K. Dielectric constant (ε’) and dielectric loss tangent (tan δ) have been determined at room temperature as a function of frequency in the frequency range 75 kHz to 80 MHz. The decrease in dielectric constant with increasing frequency attributes to Maxwell Wagner model and conduction mechanism in ferrites.

36 MATERIALS SCIENCE↗

Permanent magnet with MgB{sub 2} bulk superconductor

Superconductors with persistent zero-resistance currents serve as permanent magnets for high-field applications requiring a strong and stable magnetic field, such as magnetic resonance imaging. The recent global helium shortage has quickened research into high-temperature superconductors (HTSs)—materials that can be used without conventional liquid-helium cooling to 4.2 K. Herein, we demonstrate that 40-K-class metallic HTS magnesium diboride (MgB{sub 2}) makes an excellent permanent bulk magnet, maintaining 3 T at 20 K for 1 week with an extremely high stability (<0.1 ppm/h). The magnetic field trapped in this magnet is uniformly distributed, as for single-crystalline neodymium-iron-boron. Magnetic hysteresis loop of the MgB{sub 2} permanent bulk magnet was determined. Because MgB{sub 2} is a simple-binary-line compound that does not contain rare-earth metals, polycrystalline bulk material can be industrially fabricated at low cost and with high yield to serve as strong magnets that are compatible with conventional compact cryocoolers, making MgB{sub 2} bulks promising for the next generation of Tesla-class permanent-magnet applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Alternating current conduction mechanisms of RbMgPO4 compound

Highlights: • Two displacive reversible phase transitions located at T{sub 1} = 442/432 K and T{sub 2} = 460/445 K (heating/cooling). • The temperature dependence of conductivity was described in terms of Arrhenius relation. • The ac conductivity of this compound is proportional to ω{sup s} where the s values are between 0 and 2. • The (CBH) model was found to be the appropriate transport mechanism in RbMgPO{sub 4} compound. - Abstract: Rubidium magnesium monophosphate (RbMgPO{sub 4}) compound was prepared from highly pure constituents by solid state reaction. It was characterized by X-ray powder diffraction, IR, Raman, differential scanning calorimetry (DSC) and impedance spectroscopy. The infrared and Raman spectra were interpreted on the basis of PO{sub 4}{sup 3−} vibrations. DSC revealed two displacive and reversible phase transitions at T{sub 1} = 442/432 K and T{sub 2} = 460/445 K (heating/cooling). The electrical conductivity was measured in the frequency and temperature range 200 Hz-5 MHz and 423 K–523 K, respectively. The obtained results were analysed by fitting the experimental data to an equivalent circuit model. The temperature dependence of alternating and direct current conductivities (σ{sub ac}, σ{sub dc}) confirms the observed transitions in the calorimetric study; they were described in terms of Arrhenius relation. The activation energy’s values were determined in each phase. The AC conductivity behavior is ensured by a single process defined as a hopping transport mechanism. The conductivity frequency dependence was interpreted using the correlated barrier-hopping model (CBH) in all phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raman and dielectric study of Ba{sub 0.4}Sr{sub 0.6}TiO{sub 3}-MgAl{sub 2}O{sub 4} tunable microwave composite

(1-x)Ba{sub 0.4}Sr{sub 0.6}TiO{sub 3}-xMgAl{sub 2}O{sub 4} (x=0.00, 0.05, 0.10, 0.20, and 0.30) composite ceramics have been synthesized by the solid-state reaction, and its structural and dielectric properties have been systematically characterized. Two crystalline phases, a cubic perovskite structure Ba{sub 0.4}Sr{sub 0.6}TiO{sub 3} (BST) and a face-centered-cubic spinel structure MgAl{sub 2}O{sub 4} (MA), are clearly visible for x{>=}0.05. As the MA content increases, the composite ceramics show an increased degree of deviation from the Curie-Weiss law and an increased diffuseness of the dielectric peak. Meanwhile, the tunability of composite ceramics increases. Raman analysis clearly indicates that the incorporation of MA lowers the permittivity and degrades the quality factor of BST composites, which is ascribed to the deterioration on B-site ordering of ABO{sub 3} perovskite structure.

36 MATERIALS SCIENCE↗

Physical Property of Magnesium Doped Barium Hexaferrite Particles By Citrate Precursor Route In Presence Of Surfactants

M-type Barium Magnesium hexaferrite with the composition BaMg{sub 2}Fe{sub 10}O{sub 19} was successfully prepared with and without surfactant by using a citrate precursor route. The obtained precursors were calcined at various temperatures. The crystalline structure, phase analysis and particle size were investigated by using X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM) techniques. It is observed that the surfactant addition controls the microstructure of the formed Barium Magnesium hexaferrite particles and the type of surfactant plays a crucial role in deciding the morphology of particles.

36 MATERIALS SCIENCE↗

Structural analysis of Sm{sup 3+} doped nanocrystalline Mg-Cd ferrites prepared by oxalate co-precipitation method

The structural properties of polycrystalline Sm{sup 3+} doped Mg{sub 1} {sub -} {sub x}Cd{sub x} Fe{sub 2}O{sub 4} (x = 0.0, 0.2, 0.4, 0.6, 0.8, 1.0) have been investigated by oxalate co-precipitation method from high purity sulphates. The samples were sintered at 1050 deg. C for a duration of 5 h. The X-ray diffraction measurements confirmed the formation of a cubic spinel structure. The different parameters like lattice constant, X-ray density, physical density, porosity, crystallite size, site radii and bond length on tetrahedral and octahedral sites have been calculated. The lattice constant increases with an increase in Cd{sup 2+} content and shows non linear behavior. The crystallite size was calculated using Scherrer formula and varies from 28.69 to 32.05 nm. Physical densities were obtained by Archimedes principle. The surface morphology studied by scanning electron microscope shows that the grain size of the samples increases with an increase in Cd{sup 2+} content. The IR spectra show two strong absorption bands around 5.87 x 10{sup 4} m{sup -1} and 4.27 x 10{sup 4} m{sup -1} on the tetrahedral and octahedral sites respectively. IR spectra also show that Sm{sup 3+} occupies the octahedral B-site.

36 MATERIALS SCIENCE↗

The magnetic Curie temperature and exchange coupling between cations in tetragonal spinel oxide Mn{sub 2.5}M{sub 0.5}O{sub 4} (M = Co, Ni, Mn, Cr, and Mg) films

Mn{sub 3}O{sub 4} is a Jahn-Taller tetragonal ferrite that has a relatively low Curie temperature (T{sub c}) of {approx}43 K due to weak coupling between the canting spins. In this study, we fabricated a series of 100-nm-thick Mn{sub 2.5}M{sub 0.5}O{sub 4} (M = Co, Ni, Mn, Cr, and Mg) films via oxygen-plasma-assisted molecular beam epitaxy and measured the structural and magnetic properties of these films. These films show single phase quality, and the c-axis lattice parameter of pure Mn{sub 3}O{sub 4} is 0.944 nm, with a c/a ratio {approx}1.16, consistent with the bulk values. The replacement of Mn by M (M = Co, Ni, Cr, and Mg) changes the lattice parameters, and the c/a ratio varies between 1.16 and 1.06 depending upon the cation distribution of the films. The magnetic Curie temperatures of these films also vary in the range of 25-66 K in that Ni and Co enhance the T{sub c} whereas Mg reduces the T{sub c} (Cr shows no effect on the T{sub c}). These changes to the T{sub c} are related to both the element electronic state and the cation distributions in these compounds. As a non-collinear spin configuration can induce electrical polarization, the present study provides a systematic way to enhance the magnetic transition temperature in tetragonal spinel ferrites.

36 MATERIALS SCIENCE↗

Effect of shock-wave compression up to 65 GPa on the crystal structure and superconducting properties of MgB{sub 2}

The effect of steplike shock-wave compression up to 65 GPa on the crystal structure and super-conducting transition temperature of a polycrystalline MgB{sub 2} sample is studied. X-ray diffraction demonstrates that the shock-wave compression of the MgB{sub 2} sample does not cause any irreversible structural phase transformations in it except for the formation of lattice microstrains. These conclusions agree with the super-conducting transition temperatures of the MgB{sub 2} sample measured before and after shock-wave compression.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Upper critical field and Raman spectra of MgB{sub 2} thin films irradiated with low energy oxygen ion

The structure, upper critical field, and Raman spectrum of epitaxial MgB{sub 2} thin films irradiated by 300 keV O{sub 2}{sup +} ions have been investigated. Lattice parameter c expands after irradiation. There is a significant increase in upper critical field in the moderately irradiated films, while the critical temperature is reduced slightly. The values of critical field at zero temperature exhibit a maximum for samples with a moderate irradiation level for the applied magnetic field both perpendicular and parallel to the film surface. The temperature dependence of the anisotropy parameter, which is defined as the ratio of the upper critical field with the field parallel to the film surface and perpendicular to the film surface, reveals that oxygen ion irradiation mainly affects the sigma band at a low irradiation level. With increasing irradiation level, pi band scattering is strongly enhanced, and finally both bands are in the dirty limit. A broad peak centered around 570 cm{sup -1} is observed in the Raman spectrum of the unirradiated films, and the peak position has a visible redshift in the irradiated samples. In particular, high-frequency spectral structures appear and become dominant, while the E{sub 2g} broad band diminishes gradually with increasing irradiation fluence. The results are discussed by considering the disorder-induced change in carrier scattering within and between the sigma and pi bands and a violation of the Raman selection rules due to oxygen ion irradiation.

36 MATERIALS SCIENCE↗

SANS EXAMINATION OF THE Mg{sub 3}CoNi{sub 2} ALLOY FOR HYDROGEN STORAGE MATERIAL

The nanocrystalline Mg{sub 3}CoNi{sub 2} alloys have been synthesized from Mg, Co and Ni pure metal powder by using a SPEX 8000 High Energy Milling through wet method with its vial and ball made of stainless steel. A weight ratio of ball to sample was set at 8:1 and the milling times were set at 20 and 30 h. SANS measurements were performed in an instrument SMARTer at BATAN using a distances between 1.5, 4 and 13 m and a wavelength, {lambda}, of 0.39 nm. The SANS investigation results showed that the intensity profiles decrease with q and a power law exponent of about 4. It is suggested that surface Porod scattering dominates. The relative intensity decreases with increased hydrogen concentration, indicating a decline in surface area. Hydrogenation leads to significant changes in the scattering curves mainly due to the 1 Mg{sub 2}Ni attice expansion and changes of the Mg{sub 2}Ni-H/Mg{sub 2}Ni phase boundaries and that of the Mg{sub 2}Ni or Mg{sub 2}NiH{sub 4} grain boundaries. The samples absorb about 3.3 and 1.9 wt% hydrogen with increasing milling time of 20 and 30 h, respectively.

36 MATERIALS SCIENCE↗

Interface engineering of high-Mg-content MgZnO/BeO/Si for p-n heterojunction solar-blind ultraviolet photodetectors

High-quality wurtzite MgZnO film was deposited on Si(111) substrate via a delicate interface engineering using BeO, by which solar-blind ultraviolet photodetectors were fabricated on the n-MgZnO(0001)/p-Si(111) heterojunction. A thin Be layer was deposited on clean Si surface with subsequent in situ oxidation processes, which provides an excellent template for high-Mg-content MgZnO growth. The interface controlling significantly improves the device performance, as the photodetector demonstrates a sharp cutoff wavelength at 280 nm, consistent with the optical band gap of the epilayer. Our experimental results promise potential applications of this technique in integration of solar-blind ultraviolet optoelectronic device with Si microelectronic technologies.

36 MATERIALS SCIENCE↗

Electronic structure and electrical transport in ternary Al-Mg-B films prepared by magnetron sputtering

Nanostructured ternary Al-Mg-B films possess high hardness and corrosion resistance. In the present work, we study their electronic structure and electrical transport. The films exhibit semiconducting characteristics with an indirect optical-bandgap of 0.50 eV, as deduced from the Tauc plots, and a semiconductor behavior with a Fermi level of {approx}0.24 eV below the conduction band. Four-probe and Hall measurements indicated a high electrical conductivity and p-type carrier mobility, suggesting that the electrical transport is mainly due to hole conduction. Their electrical properties are explained in terms of the film nanocomposite microstructure consisting of an amorphous B-rich matrix containing AlMgB{sub 14} nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗