Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNESIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Dynamical behaviors of structural, constrained and free water in calcium- and magnesium-silicate-hydrate gels

We present the hypothesis that the mechanical properties of cement pastes depend strongly on their porosities. In a saturated paste, the porosity links to the free water volume after hydration. Structural water, constrained water, and free water have different dynamical behavior. Hence, it should be possible to extract information on pore system by exploiting the water dynamics. With our experiments we investigated the slow dynamics of hydration water confined in calcium- and magnesium-silicate-hydrate (C-S-H and M-S-H) gels using high-resolution quasi-elastic neutron scattering (QENS) technique. C-S-H and M-S-H are the chemical binders present in calcium rich and magnesium rich cements. We measured three M-S-H samples: pure M-S-H, M-S-H with aluminum-silicate nanotubes (ASN), and M-S-H with carboxyl group functionalized ASN (ASN-COOH). A C-S-H sample with the same water content (i.e. 0.3) is also studied for comparison. We found that structural water in the gels contributes to the elastic component of the QENS spectrum, while constrained water and free water contribute the quasi-elastic component. The quantitative analysis suggests that the three components vary for different samples and indicate the variance in the system porosity, which controls the mechanical properties of cement pastes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectral quadrature for the first principles study of crystal defects: Application to magnesium

In this work, we present an accurate and efficient finite-difference formulation and parallel implementation of Kohn-Sham Density (Operator) Functional Theory (DFT) for non periodic systems embedded in a bulk environment. Specifically, employing non-local pseudopotentials, local reformulation of electrostatics, and truncation of the spatial Kohn-Sham Hamiltonian, and the Linear Scaling Spectral Quadrature method to solve for the pointwise electronic fields in real-space and the non-local component of the atomic force, we develop a parallel finite difference framework suitable for distributed memory computing architectures to simulate non-periodic systems embedded in a bulk environment. Choosing examples from magnesium-aluminum alloys, we first demonstrate the convergence of energies and forces with respect to spectral quadrature polynomial order, and the width of the spatially truncated Hamiltonian. Next, we demonstrate the parallel scaling of our framework, and show that the computation time and memory scale linearly with respect to the number of atoms. Next, we use the developed framework to simulate isolated point defects and their interactions in magnesium-aluminum alloys. Our findings conclude that the binding energies of divacancies, Al solute-vacancy and two Al solute atoms are anisotropic and are dependent on cell size. Furthermore, the binding is favorable in all three cases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Loading direction dependence of asymmetric response of pyramidal slip in rolled AZ31 magnesium alloy

Textured magnesium alloys usually exhibit anisotropic mechanical behavior due to the asymmetric activation of different twinning and slipping modes. This work focuses on the pyramidal slip responses of rolled AZ31 magnesium alloy under two loading conditions, compressive and tensile loading along the normal direction. Under the condition where the compressive loading direction is closely parallel to the c-axis of the unit cell, tensile twinning and basal slips are prohibited, dislocations then active and tend to accumulate at grain boundaries and form dislocation walls. Meanwhile, these dislocations exhibit zigzag morphologies, which result from the cross-slip from {$10\bar{1}1$} first-order pyramidal plane to {$11\bar{2}2$} second-order pyramidal plane, then back to {$10\bar{1}1$} first-order pyramidal plane. Under the condition where tensile twins are prevalent, {$10\bar{1}1$} first-order and {$11\bar{2}2$} second-order pyramidal dislocations are favorable to be activated. Both types of dislocations behave climb-like dissociations onto the basal plane, forming zigzag dislocations. first-order pyramidal plane to second-order pyramidal plane, then back to first-order pyramidal plane. Under the condition where tensile twins are prevalent, first-order and second-order pyramidal dislocations are favorable to be activated. Both types of dislocations behave climb-like dissociations onto the basal plane, forming zigzag dislocations.

36 MATERIALS SCIENCE↗

Precursor preparation for Ca-Al layered double hydroxide to remove hexavalent chromium coexisting with calcium and magnesium chlorides

Al(OH){sub 3} and Ca(OH){sub 2} powders are co-ground to prepare a precursor which hydrates into a layered double hydroxide (LDH) phase by agitation in aqueous solution with target hexavalent chromium (Cr(VI)) at room temperature, to achieve an obvious improvement in removal efficiency of Cr(VI) through an easy incorporation into the structure. Although the prepared precursor transforms into LDH phases also when agitated in the solutions of calcium and magnesium chlorides, it incorporates Cr(VI) preferentially to the chloride salts when they coexist. The adsorption isotherm and kinetic studies show that the phenomena occurring on the Al-Ca precursor fit a pseudo-second-order kinetics with a Langmuir adsorption capacity of 59.45 mg/g. Besides, characterizations of the prepared precursor and the samples after adsorption are also performed by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), Transmission electron microscope (TEM) to understand the reason of the preferential incorporation of Cr(VI) to the coexisting chloride salts during the LDH phase formation. - Graphical abstract: Activated Ca-Al hydroxides (C{sub 3}A) transformed into Ca-Al-OH compound when agitated in water. Ca-Al precursor (C{sub 3}A) was agitated in a hexavalent chromium (Cr(VI)) solution to form Al-Ca-CrO{sub 4} LDH product. Ca-Al-CrO{sub 4} LDH phase occurred preferentially to Ca-Al-MCl{sub 2} LDH phases in the solutions of calcium and magnesium chlorides, it incorporates Cr(VI) preferentially to the chloride salts when they coexist. - Highlights: • Activated Ca-Al hydroxides transformed into LDH when agitated in water with some inorganic substances. • Hexavalent Cr was incorporated in the LDH structure at high adsorption capacity. • Ca-Al-Cr LDH phase occurred preferentially to Ca-Al-MCl{sub 2} LDH phases with coexistence. • The prepared Ca-Al hydroxides had high performance as adsorbent even with high salinity of the solution.

36 MATERIALS SCIENCE↗

Microstructural development of diffusion-brazed austenitic stainless steel to magnesium alloy using a nickel interlayer

The differences in physical and metallurgical properties of stainless steels and magnesium alloys make them difficult to join using conventional fusion welding processes. Therefore, the diffusion brazing of 316L steel to magnesium alloy (AZ31) was performed using a double stage bonding process. To join these dissimilar alloys, the solid-state diffusion bonding of 316L steel to a Ni interlayer was carried out at 900 deg. C followed by diffusion brazing to AZ31 at 510 deg. C. Metallographic and compositional analyses show that a metallurgical bond was achieved with a shear strength of 54 MPa. However, during the diffusion brazing stage B{sub 2} intermetallic compounds form within the joint and these intermetallics are pushed ahead of the solid/liquid interface during isothermal solidification of the joint. These intermetallics had a detrimental effect on joint strengths when the joint was held at the diffusion brazing temperature for longer than 20 min.

36 MATERIALS SCIENCE↗

EBSD analysis of magnesium addition on inclusion formation in SS400 structural steel

In this study, the effect of magnesium addition on the inclusion formation in SS400 steel was investigated. The experimental specimens with and without Mg addition treatment were compared. The microstructure was observed using optical microscopy after etching with 3% nital. The morphology and chemical composition of the inclusions were analyzed via scanning electron microscopy and energy dispersive spectrometry. The lattice structure and orientation of the inclusions were identified by electron backscattering diffraction. The average size of inclusions in SS400 was between 0.67 and 0.75 μm, and between 0.65 and 0.68 μm in SS400 + Mg. The 2 ppm Mg addition resulted in the oxide formation change from Al{sub 2}O{sub 3} to MgO·Al{sub 2}O{sub 3} and in the inclusion formation change from Al{sub 2}O{sub 3}–MnS to MgO·Al{sub 2}O{sub 3}–MnS. Moreover, a simple-phase MnS with an average grain size of 1 μm to 2 μm was observed in rod-like, globular, and polyhedron forms. - Highlights: • The effect of magnesium addition was investigated for SS400 steel. • 2 ppm Mg addition changes the inclusion formation from Al2O3-MnS to MgO·Al2O3-MnS. • MnS observed in inclusions exhibits rod-like, globular, and polyhedron forms.

36 MATERIALS SCIENCE↗

Thermal Microstructural Stability of AZ31 Magnesium after Severe Plastic Deformation

Both equal channel angular pressing and friction stir processing have the ability to refine the grain size of twin roll cast AZ31 magnesium and potentially improve its superplastic properties. This work used isochronal and isothermal heat treatments to investigate the microstructural stability of twin roll cast, equal channel angular pressed and friction stir processed AZ31 magnesium. For both heat treatment conditions, it was found that the twin roll casted and equal channel angular pressed materials were more stable than the friction stir processed material. Calculations of the grain growth kinetics showed that severe plastic deformation processing decreased the activation energy for grain boundary motion with the equal channel angular pressed material having the greatest Q value of the severely plastically deformed materials and that increasing the tool travel speed of the friction stir processed material improved microstructural stability. The Hollomon-Jaffe parameter was found to be an accurate means of identifying the annealing conditions that will result in substantial grain growth and loss of potential superplastic properties in the severely plastically deformed materials. In addition, Humphreys’s model of cellular microstructural stability accurately predicted the relative microstructural stability of the severely plastically deformed materials and with some modification, closely predicted the maximum grain size ratio achieved by the severely plastically deformed materials.

FSW↗

Role of deformation temperature on the evolution and heterogeneity of texture during equal channel angular pressing of magnesium

Investigations on texture evolution and through-thickness texture heterogeneity during equal channel angular pressing (ECAP) of pure magnesium at 200 °C, 150 °C and room temperature (RT) was carried out by neutron, high energy synchrotron X-ray and electron back-scatter diffraction. Irrespective of the ECAP temperature, a distinctive basal (B) and pyramidal (C{sub 2}) II type of fibers forms. The texture differs in the bottom 1 mm portion, where the B-fiber is shifted ~ 55° due to negative shear attributed to friction. - Highlights: • ECAP of magnesium was carried out at 200 °C, 150 °C and room temperature. • Microstructure and micro-texture evolution was examined using EBSD in FEG–SEM. • Bulk-texture was studied using neutron diffraction and compared with micro-texture. • Through thickness texture heterogeneity was observed by synchrotron radiation. • Changes in these parameters with respect to deformation temperature are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of the reaction products and precipitates at the interface of carbon fiber reinforced magnesium–gadolinium composite

In the present work, carbon fiber reinforced magnesium-gadolinium composite was fabricated by pressure infiltration method. The phase composition, micro-morphology, and crystal structure of reaction products and precipitates at the interface of the composite were investigated. Scanning electron microscopy and energy dispersive spectroscopy analysis revealed the segregation of gadolinium element at the interface between carbon fiber and matrix alloy. It was shown that block-shaped Gd4C5, GdC2 and nano-sized Gd2O3 were formed at the interface during the fabrication process due to the interfacial reaction. Furthermore, magnesium-gadolinium precipitates including needle-like Mg5Gd (or Mg24Gd5) and thin plate-shaped long period stacking-ordered phase, were also observed at the interface and in the matrix near the interface. The interfacial microstructure and bonding mode were influenced by these interfacial products, which were beneficial for the improvement of the interfacial bonding strength. - Highlights: • Gadolinium element segregated on the surface of carbon fibers. • Block-shaped Gd{sub 4}C{sub 5} and GdC{sub 2} were formed at the interface via chemical reaction. • Gadolinium and oxygen reacted at the interface and formed nano-scaled Gd{sub 2}O{sub 3}. • The precipitates formed in the interface were identified to be Mg{sub 5}Gd (or Mg{sub 24}Gd{sub 5}) and plate-shaped long period stacking-ordered phase.

36 MATERIALS SCIENCE↗

Effect of in-situ (TiC-TiB2) reinforcement on aging and mechanical behavior of AZ91 magnesium matrix composite

Highlights: • Effect of TiC-TiB{sub 2} particles on precipitation behavior of in-situ composite was studied. • The age-hardening rate of in-situ composites is faster than that of alloy. • Faster age hardening rate is due to the presence of high dislocation density in composite. • Post aging treatment improved the mechanical properties of both base and composite. - Abstract: In the present work, influence of in-situ TiC-TiB{sub 2} reinforcement on age hardening behavior and mechanical properties of TiC-TiB{sub 2}/AZ91 composite was investigated. The base and in-situ composite materials were solution treated at 400 °C for 24 h and then aged at different temperatures up to 100 h. The kinetics of age hardening results revealed that the addition of in-situ TiC-TiB{sub 2} reinforcement increase the age hardening kinetics of the composite as compared to AZ91 magnesium alloy. The improvement in age hardening kinetics is attributed to the presence of high dislocation density resulted from the mismatch of coefficients of thermal expansion between in-situ TiC-TiB{sub 2} reinforcement and magnesium matrix. The precipitation behavior of Mg{sub 17}Al{sub 12} phase in both AZ91 alloy and TiC-TiB{sub 2}/AZ91 composites were established. After age hardening, base and in-situ composite materials show significant improvement in ultimate tensile strength by 47.72% and 66.49% respectively as compared with the base monolithic alloy. The enhancement of mechanical properties in the base and in-situ composites is explained in detail by analyzing their fractographs and microstructures.

36 MATERIALS SCIENCE↗

Dynamic recrystallization kinetics and microstructure evolution of an AZ91D magnesium alloy during hot compression

Highlights: • DRX kinetic model is developed for the aged AZ91D magnesium alloy. • The DRX behavior in different strained regions was investigated. • Four morphologies of the second phase were proposed during the hot compression tests. • The nucleation mechanisms of the DRX grains were clarified. - Abstract: The flow behavior of as-cast AZ91D magnesium alloy was evaluated by isothermal compression tests within the temperatures of 220 °C, 260 °C, 300 °C, 340 °C, and 380 °C, and the strain rates of 0.001, 0.01, 0.1, 1 and 10s{sup −1}. Based on the stress-strain curve and hyperbolic sine function, the thermal activation energy and the strain rate sensitivity of the material were determined to be 142.2726 kJ·mol{sup −1} and 0.142, respectively. The S type evolution of the dynamic recrystallization with the increasing strain that dynamic recrystallization (DRX) model obtained from stress and strain data. There was a good consistency between the proposed DRX kinetics model and microstructure observation results. Combining isothermal compression specimens with finite element and scanning electron microscopy (SEM) analysis indicated that the sample can be divided into rarely recrystallized region, partially recrystallized region and completely recrystallized region, which falls within the dense deformation zone, free deformation zone and severe deformation zone, respectively. The different forms of the β-Mg{sub 17}Al{sub 12} phase induced by compression tests were confirmed by SEM. Nucleation mechanisms of the DRX were discussed with reference to the transmission electron microscope (TEM) analysis results.

36 MATERIALS SCIENCE↗

Electrical transport behavior of nonstoichiometric magnesium-zinc ferrite

This paper presents the direct current conductivity, alternate current conductivity and dielectric properties of nonstoichiometric magnesium-zinc ferrite below room temperature. The frequency exponent (s) of conductivity shows an anomalous temperature dependency. The magnitude of the temperature exponent (n) of dielectric permittivity strongly depends on frequency and its value decreases with increasing frequency. The grain boundary contribution is dominating over the grain contribution in conduction process and the temperature dependence of resistance due to grain and grain boundary contribution exhibits two activation regions. The ferrite shows positive alternating current magnetoconductivity. The solid state processing technique was used for the preparation of nanocrystalline ferrite powder from oxides of magnesium, zinc and iron. The X-ray diffraction methods were used in determining the structure and composition of obtained ferrite, while multimeter, impedance analyzer, liquid nitrogen cryostat and electromagnet were used in the study of conducting and dielectric properties of ferrite.

36 MATERIALS SCIENCE↗

Structure-dielectric properties relationships in copper-substituted magnesium ferrites

Graphical abstract: - Highlights: • Synthesis of copper substituted magnesium ferrites materials is reported. • A shift from cubic to tetragonal structure starting with x = 0.84 was observed. • The dielectric properties are influenced by Cu-substitution. - Abstract: Nanocrystalline powders of copper-substituted magnesium ferrites with general formula Mg{sub 1−x}Cu{sub x}Fe{sub 2}O{sub 4} (x = 0.00, 0.17, 0.34, 0.50, 0.67, 0.84, 1.00) were prepared for the first time by sol–gel auto-combustion method, using glycine as fuel agent. Solid phase chemical reactions and the occurrence of spinel structure were monitored by using infrared spectroscopy. X-ray diffraction analysis confirmed the spinel single-phase formation. A shift from cubic structure to tetragonal structure starting with x = 0.84 was also observed. Microstructure of the samples was analyzed by scanning electron microscopy and particle size was estimated from the micrographs. Analysis of dielectric properties revealed very low values of dielectric loss at frequencies over 10 MHz.

36 MATERIALS SCIENCE↗

Impact-induced twinning in a magnesium alloy under different stress conditions

We investigate deformation twinning in a highly textured magnesium alloy plate of Mg-3.1%Al-0.9%Zn-0.4%Mn under edge-on impact with in situ, synchrotron-based, ultrafast X-ray diffraction measurements, and corresponding stress states are simulated with the finite element method. Deformation twinning and its anisotropy under the triaxial stress condition are explained by a statistical analysis of resolved shear stress. The critical resolved shear stress criterion is applicable under complicated stress conditions induced by high strain rate impact loading. Three typical simple stress conditions are further explored as verification and application cases: uniaxial-stress, uniaxial-strain, and plane-stress. Extension twinning in the magnesium alloy is prone to occur for impact loading applied perpendicular to the crystallographic c-axis, regardless of the exact stress conditions.

36 MATERIALS SCIENCE↗

Crystal Plasticity Finite Element Analysis of Loading-Unloading Behaviour in Magnesium Alloy Sheet

Magnesium alloy sheets exhibit strong inelastic response during unloading. In this study crystal plasticity finite element analysis of loading-unloading behaviour during uniaxial tension in a rolled magnesium alloy sheet was carried out, and the mechanism of this inelastic response was examined in detail in terms of macroscopic and mesoscopic deformations. The unloading behaviour obtained by the simulation was in good agreement with the experiment in terms of variation with stress of instantaneous tangent modulus during unloading. Variations of activities of each family of slip systems during the deformation showed that the activation of basal slip systems is the largest during unloading, and the slip direction during unloading is opposite from during loading. These results indicated that one of the factors of the inelastic behaviour during unloading is the fact that the basal slip systems are easily activated during unloading because of their low strengths.

36 MATERIALS SCIENCE↗

A Crystalline Plasticity Finite Element Method for Simulation of the Plastic Deformation of AZ31 Magnesium Alloys

In this paper, a constitutive framework based on a crystalline plasticity model is employed to simulate the plastic deformation of AZ31 magnesium alloy, which posses the hexagonal close packed (HCP) crystal structure. Dislocation slip and mechanical twinning are taken into account in the model. The successive integration method is used to determine the active slip systems, and the contribution of twinning to the grain reorientation is treated by the PTR method. The FE model is introduced into ABAQUS/Explicit through a user material subroutine (VUMAT). Three deformation processes of AZ31 magnesium alloy, including tension, compression and a stamping process, are simulated with the present method. The simulation results are compared with experiment and those presented in the literature.

36 MATERIALS SCIENCE↗

Femtosecond two-photon photoassociation of hot magnesium atoms: A quantum dynamical study using thermal random phase wavefunctions

Two-photon photoassociation of hot magnesium atoms by femtosecond laser pulses, creating electronically excited magnesium dimer molecules, is studied from first principles, combining ab initio quantum chemistry and molecular quantum dynamics. This theoretical framework allows for rationalizing the generation of molecular rovibrational coherence from thermally hot atoms [L. Rybak, S. Amaran, L. Levin, M. Tomza, R. Moszynski, R. Kosloff, C. P. Koch, and Z. Amitay, Phys. Rev. Lett. 107, 273001 (2011)]. Random phase thermal wavefunctions are employed to model the thermal ensemble of hot colliding atoms. Comparing two different choices of basis functions, random phase wavefunctions built from eigenstates are found to have the fastest convergence for the photoassociation yield. The interaction of the colliding atoms with a femtosecond laser pulse is modeled non-perturbatively to account for strong-field effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Manufacture of gradient micro-structures of magnesium alloys using two stage extrusion dies

This paper aims to manufacture magnesium alloy metals with gradient micro-structures using hot extrusion process. The extrusion die was designed to have a straight channel part combined with a conical part. Materials pushed through this specially-designed die generate a non-uniform velocity distribution at cross sections inside the die and result in different strain and strain rate distributions. Accordingly, a gradient microstructure product can be obtained. Using the finite element analysis, the forming temperature, effective strain, and effective strain rate distributions at the die exit were firstly discussed for various inclination angles in the conical die. Then, hot extrusion experiments with a two stage die were conducted to obtain magnesium alloy products with gradient micro-structures. The effects of the inclination angle on the grain size distribution at cross sections of the products were also discussed. Using a die of an inclination angle of 15°, gradient micro-structures of the grain size decreasing gradually from 17 μm at the center to 4 μm at the edge of product were achieved.

36 MATERIALS SCIENCE↗