Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Linear Solvers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Potential quantum advantage for simulation of fluid dynamics

Numerical simulation of turbulent fluid dynamics needs to either parametrize turbulence—which introduces large uncertainties—or explicitly resolve the smallest scales—which is prohibitively expensive. Here, we provide evidence through analytic bounds and numerical studies that a potential quantum speedup can be achieved to simulate fluid dynamics using quantum computing. Specifically, we provide a lattice Boltzmann formulation of fluid dynamics for which we give evidence that low-order Carleman linearization is much more accurate than previously believed for these systems. This is achieved via a combination of reformulating the Navier-Stokes nonlinearity (u·$\triangledown$u) to lattice-Boltzmann nonlinearity (u 2 ) and accurately linearizing the dynamical equations, which effectively trades nonlinearity for additional degrees of freedom that add negligible expense in the quantum solver. Based on this, we apply a quantum algorithm for simulating the Carleman-linearized lattice Boltzmann equation and provide evidence that its cost scales logarithmically with system size compared with polynomial scaling in the best known classical algorithms. In this paper, we suggest that a quantum advantage may exist for simulating fluid dynamics, paving the way for simulating nonlinear multiscale transport phenomena in a wide range of disciplines using quantum computing.

42 ENGINEERING↗
DOE OSTI2020

Approximate Inverse Chain Preconditioner: Iteration Count Case Study for Spectral Support Solvers

As the growing availability of computational power slows, there has been an increasing reliance on algorithmic advances. However, faster algorithms alone will not necessarily bridge the gap in allowing computational scientists to study problems at the edge of scientific discovery in the next several decades. Often, it is necessary to simplify or precondition solvers to accelerate the study of large systems of linear equations commonly seen in a number of scientific fields. Preconditioning a problem to increase efficiency is often seen as the best approach; yet, preconditioners which are fast, smart, and efficient do not always exist. Following the progress of [1], we present a new preconditioner for symmetric diagonally dominant (SDD) systems of linear equations. These systems are common in certain PDEs, network science, and supervised learning among others. Based on spectral support graph theory, this new preconditioner builds off of the work of [2], computing and applying a V-cycle chain of approximate inverse matrices. This preconditioner approach is both algebraic in nature as well as hierarchically-constrained depending on the condition number of the system to be solved. Due to its generation of an Approximate Inverse Chain of matrices, we refer to this as the AIC preconditioner. We further accelerate the AIC preconditioner by utilizing precomputations to simplify setup and multiplications in the con-text of an iterative Krylov-subspace solver. While these iterative solvers can greatly reduce solution time, the number of iterations can grow large quickly in the absence of good preconditioners. Initial results for the AIC preconditioner have shown a very large reduction in iteration counts for SDD systems as compared to standard preconditioners such as Incomplete Cholesky (ICC) and Multigrid (MG). We further show significant reduction in iteration counts against the more advanced Combinatorial Multigrid (CMG) preconditioner. We have further developed no-fill sparsification techniques to ensure that the computational cost of applying the AIC preconditioner does not grow prohibitively large as the depth of the V-cycle grows for systems with larger condition numbers. Our numerical results have shown that these sparsifiers maintain the sparsity structure of our system while also displaying significant reductions in iteration counts.1 2

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Approximate Inverse Chain Preconditioner: Iteration Count Case Study for Spectral Support Solvers

As the growing availability of computational power slows, there has been an increasing reliance on algorithmic advances. However, faster algorithms alone will not necessarily bridge the gap in allowing computational scientists to study problems at the edge of scientific discovery in the next several decades. Often, it is necessary to simplify or precondition solvers to accelerate the study of large systems of linear equations commonly seen in a number of scientific fields. Preconditioning a problem to increase efficiency is often seen as the best approach; yet, preconditioners which are fast, smart, and efficient do not always exist. Following the progress of [1], we present a new preconditioner for symmetric diagonally dominant (SDD) systems of linear equations. These systems are common in certain PDEs, network science, and supervised learning among others. Based on spectral support graph theory, this new preconditioner builds off of the work of [2], computing and applying a V-cycle chain of approximate inverse matrices. This preconditioner approach is both algebraic in nature as well as hierarchically-constrained depending on the condition number of the system to be solved. Due to its generation of an Approximate Inverse Chain of matrices, we refer to this as the AIC preconditioner. We further accelerate the AIC preconditioner by utilizing precomputations to simplify setup and multiplications in the con-text of an iterative Krylov-subspace solver. While these iterative solvers can greatly reduce solution time, the number of iterations can grow large quickly in the absence of good preconditioners. Initial results for the AIC preconditioner have shown a very large reduction in iteration counts for SDD systems as compared to standard preconditioners such as Incomplete Cholesky (ICC) and Multigrid (MG). We further show significant reduction in iteration counts against the more advanced Combinatorial Multigrid (CMG) preconditioner. We have further developed no-fill sparsification techniques to ensure that the computational cost of applying the AIC preconditioner does not grow prohibitively large as the depth of the V-cycle grows for systems with larger condition numbers. Our numerical results have shown that these sparsifiers maintain the sparsity structure of our system while also displaying significant reductions in iteration counts.1 2

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2007

USM3D Unstructured Grid Solutions for CAWAPI at NASA LaRC

In support the Cranked Arrow Wing Aerodynamic Project International (CAWAPI) to improve the Technology Readiness Level of flow solvers by comparing results with measured F-16XL-1 flight data, NASA Langley employed the TetrUSS unstructured grid solver, USM3D, to obtain solutions for all seven flight conditions of interest. A newly available solver version that incorporates a number of turbulence models, including the two-equation linear and non-linear k-epsilon, was used in this study. As a first test, a choice was made to utilize only a single grid resolution with the solver for the simulation of the different flight conditions. Comparisons are presented with three turbulence models in USM3D, flight data for surface pressure, boundary-layer profiles, and skin-friction results, as well as limited predictions from other solvers. A result of these comparisons is that the USM3D solver can be used in an engineering environment to predict flow physics on a complex configuration at flight Reynolds numbers with a two-equation linear k-epsilon turbulence model.

Lamar, John E.↗
NASA NTRS2001

Computational Aeroacoustic Analysis System Development

Many industrial and commercial products operate in a dynamic flow environment and the aerodynamically generated noise has become a very important factor in the design of these products. In light of the importance in characterizing this dynamic environment, Rocketdyne has initiated a multiyear effort to develop an advanced general-purpose Computational Aeroacoustic Analysis System (CAAS) to address these issues. This system will provide a high fidelity predictive capability for aeroacoustic design and analysis. The numerical platform is able to provide high temporal and spatial accuracy that is required for aeroacoustic calculations through the development of a high order spectral element numerical algorithm. The analysis system is integrated with well-established CAE tools, such as a graphical user interface (GUI) through PATRAN, to provide cost-effective access to all of the necessary tools. These include preprocessing (geometry import, grid generation and boundary condition specification), code set up (problem specification, user parameter definition, etc.), and postprocessing. The purpose of the present paper is to assess the feasibility of such a system and to demonstrate the efficiency and accuracy of the numerical algorithm through numerical examples. Computations of vortex shedding noise were carried out in the context of a two-dimensional low Mach number turbulent flow past a square cylinder. The computational aeroacoustic approach that is used in CAAS relies on coupling a base flow solver to the acoustic solver throughout a computational cycle. The unsteady fluid motion, which is responsible for both the generation and propagation of acoustic waves, is calculated using a high order flow solver. The results of the flow field are then passed to the acoustic solver through an interpolator to map the field values into the acoustic grid. The acoustic field, which is governed by the linearized Euler equations, is then calculated using the flow results computed from the flow solver.

Hadid, A.↗
DOE OSTI2022

A high accuracy/resolution spectral element/Fourier–Galerkin method for the simulation of shoaling non-linear internal waves and turbulence in long domains with variable bathymetry

A high-order hybrid continuous-Galerkin numerical method, designed for the simulation of non-linear, non -hydrostatic internal waves and turbulence in long computational domains with complex bathymetry, is presented. The spatial discretization in the non-periodic wave-propagating directions, utilizes the nodal spectral element method. Such a high-order element-based discretization allows the highly accurate representation of complex domain geometry along with the flexibility of concentrating resolution in areas of interest. Under the assumption of the normal-to-isobath propagation of non-linear internal waves, a third periodic direction is incorporated via a Fourier-Galerkin discretization. The distinct non-hydrostatic nature of non-linear internal waves and, any instabilities and turbulence therein, necessitates the numerically challenging solution of the pressure Poisson problem. A defining feature of this work is the application of a domain decomposition approach, combined with block-Jacobi/deflation-based preconditioning to the pressure Poisson problem. Such a combined approach is particularly suitable for the long high aspect-ratio complex domains of interest and enables the efficient high-accuracy reproduction of the non-hydrostatic dynamics of non-linear internal waves. Implementation details are also described in the context of the stability of the solver and its parallelization strategy. A series of benchmarks of increasing complexity demonstrate the robustness of the flow solver. The benchmarks culminate with the three-dimensional simulation of a convectively breaking mode-one non-linear internal wave over a realistic South-China-Sea bathymetric transect and background current/stratification profiles.

Deflation↗
NASA NTRS2024

Global Optimization via Quadratic Disjunctive Programming for Water Networks Design with Energy Recovery

Generalized disjunctive programming (GDP) models with bilinear and concave constraints, often seen in water network design, are challenging optimization problems. This work proposes quadratic and piecewise linear approximations for nonlinear terms to reformulate GDP models into quadratic GDP (QGDP) models that suitable solvers may solve more efficiently. We illustrate the benefits of the quadratic reformulation with a water treatment network design problem in which nonconvexities arise from bilinear terms in the mixers’ mass balances and concave investment cost functions of treatment units. Given the similarities with water network design problems, we suggest quadratic approximation for the GDP model for the optimal design of a large-scale reverse electrodialysis (RED) process. This power technology can recover energy from salinity differences between by-product streams of the water sector, such as desalination brine mixed with regenerated wastewater effluents. The solver Gurobi excels in handling QGDP problems, but weighing the problem’s precision and tractability balance is crucial. The piecewise linear approximation yields more accurate, yet larger QGDP models that may require longer optimization times in large-scale process synthesis problems.

Water Networks↗
DOE OSTI2024

hypredrive: high-level interface for solving linear systems with hypre

This software introduces a high-level interface designed to simplify solving linear systems using hypre, a renowned library for such computational challenges. It is crafted to be accessible and user-friendly, making the powerful capabilities of hypre available to a broader audience without requiring in-depth technical knowledge. The interface is characterized by its use of YAML for input, a format celebrated for its structured yet straightforward readability. This choice ensures that users can easily configure the software to meet their specific needs. Additionally, the software boasts an intuitive API that encapsulates hypre's functionalities, making it easier for users to interact with the process of solving linear systems. It is particularly beneficial for prototyping, offering a quick and efficient means to test various solver and preconditioner configurations. Furthermore, the software allows for the creation of an offline testing framework in which predefined linear systems are read from files and benchmarked with user-defined solution strategies. This makes it an invaluable tool for developers and researchers exploring and validating their computational models. Overall, the software serves as a bridge, bringing the advanced computational capabilities of hypre closer to users who may need more specialized technical expertise, thereby facilitating innovation and exploration in the field of numerical linear algebra.

Paludetto Magri, Victor↗
DOE OSTI2024

Flattening of the EFT-hedron: supersymmetric positivity bounds and the search for string theory

We examine universal positivity constraints on 2 → 2 scattering in 4d planar N = 4 supersymmetric Yang-Mills theory with higher-derivative corrections. We present numerical evidence that the convex region of allowed Wilson coefficients (the “EFT-hedron”) flattens completely along about one-third of its dimensions when an increasing number of constraints on the spectral density from crossing-symmetry are included. Our analysis relies on the formulation of the positivity constraints as a linear optimization problem, which we implement using two numerical solvers, SDPB and CPLEX. Motivated by the flattening, we propose a novel partially resummed low-energy expansion of the 2 → 2 amplitude. As part of the analysis, we provide additional evidence in favor of the conjecture [1] that the Veneziano amplitude is the only amplitude compatible with both S-matrix bootstrap constraints and string monodromy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Local Excitations of a Charged Nitrogen Vacancy in Diamond with Multireference Density Matrix Embedding Theory

Here, we investigate the negatively charged nitrogen-vacancy center in diamond using periodic density matrix embedding theory (pDMET). To describe the strongly correlated excited states of this system, the complete active space self-consistent field (CASSCF) followed by n-electron valence state second-order perturbation theory (NEVPT2) was used as the impurity solver. Since the NEVPT2-DMET energies show a linear dependence on the inverse of the size of the embedding subspace, we performed an extrapolation of the excitation energies to the nonembedding limit using a linear regression. The extrapolated NEVPT2-DMET first triplet–triplet excitation energy is 2.31 eV and that for the optically inactive singlet–singlet transition is 1.02 eV, both in agreement with the experimentally observed vertical excitation energies of ∼2.18 eV and ∼1.26 eV, respectively. This is the first application of pDMET to a charged periodic system and the first investigation of the NV – defect using NEVPT2 for periodic supercell models.

36 MATERIALS SCIENCE↗
NASA NTRS1991

Large liquid rocket engine transient performance simulation system

A simulation system, ROCETS, was designed and developed to allow cost-effective computer predictions of liquid rocket engine transient performance. The system allows a user to generate a simulation of any rocket engine configuration using component modules stored in a library through high-level input commands. The system library currently contains 24 component modules, 57 sub-modules and maps, and 33 system routines and utilities. FORTRAN models from other sources can be operated in the system upon inclusion of interface information on comment cards. Operation of the simulation is simplified for the user by run, execution, and output processors. The simulation system makes available steady-state trim balance, transient operation, and linear partial generation. The system utilizes a modern equation solver for efficient operation of the simulations. Transient integration methods include integral and differential forms for the trapezoidal, first order Gear, and second order Gear corrector equations. A detailed technology test bed engine (TTBE) model was generated to be used as the acceptance test of the simulation system. The general level of model detail was that reflected in the Space Shuttle Main Engine DTM. The model successfully obtained steady-state balance in main stage operation and simulated throttle transients, including engine starts and shutdown. A NASA FORTRAN control model was obtained, ROCETS interface installed in comment cards, and operated with the TTBE model in closed-loop transient mode.

Mason, J. R.↗
NASA NTRS1992

Development of iterative techniques for the solution of unsteady compressible viscous flows

The development of efficient iterative solution methods for the numerical solution of two- and three-dimensional compressible Navier-Stokes equations is discussed. Iterative time marching methods have several advantages over classical multi-step explicit time marching schemes, and non-iterative implicit time marching schemes. Iterative schemes have better stability characteristics than non-iterative explicit and implicit schemes. In this work, another approach based on the classical conjugate gradient method, known as the Generalized Minimum Residual (GMRES) algorithm is investigated. The GMRES algorithm has been used in the past by a number of researchers for solving steady viscous and inviscid flow problems. Here, we investigate the suitability of this algorithm for solving the system of non-linear equations that arise in unsteady Navier-Stokes solvers at each time step.

Sankar, Lakshmi N.↗
NASA NTRS2011

Efficient Solution of Three-Dimensional Problems of Acoustic and Electromagnetic Scattering by Open Surfaces

We present a computational methodology (a novel Nystrom approach based on use of a non-overlapping patch technique and Chebyshev discretizations) for efficient solution of problems of acoustic and electromagnetic scattering by open surfaces. Our integral equation formulations (1) Incorporate, as ansatz, the singular nature of open-surface integral-equation solutions, and (2) For the Electric Field Integral Equation (EFIE), use analytical regularizes that effectively reduce the number of iterations required by iterative linear-algebra solution based on Krylov-subspace iterative solvers.

sound-soft acoustic scattering↗
NASA NTRS2016

Improving Fidelity of Launch Vehicle Liftoff Acoustic Simulations

Launch vehicles experience high acoustic loads during ignition and liftoff affected by the interaction of rocket plume generated acoustic waves with launch pad structures. Application of highly parallelized Computational Fluid Dynamics (CFD) analysis tools optimized for application on the NAS computer systems such as the Loci/CHEM program now enable simulation of time-accurate, turbulent, multi-species plume formation and interaction with launch pad geometry and capture the generation of acoustic noise at the source regions in the plume shear layers and impingement regions. These CFD solvers are robust in capturing the acoustic fluctuations, but they are too dissipative to accurately resolve the propagation of the acoustic waves throughout the launch environment domain along the vehicle. A hybrid Computational Fluid Dynamics and Computational Aero-Acoustics (CFD/CAA) modeling framework has been developed to improve such liftoff acoustic environment predictions. The framework combines the existing highly-scalable NASA production CFD code, Loci/CHEM, with a high-order accurate discontinuous Galerkin (DG) solver, Loci/THRUST, developed in the same computational framework. Loci/THRUST employs a low dissipation, high-order, unstructured DG method to accurately propagate acoustic waves away from the source regions across large distances. The DG solver is currently capable of solving up to 4th order solutions for non-linear, conservative acoustic field propagation. Higher order boundary conditions are implemented to accurately model the reflection and refraction of acoustic waves on launch pad components. The DG solver accepts generalized unstructured meshes, enabling efficient application of common mesh generation tools for CHEM and THRUST simulations. The DG solution is coupled with the CFD solution at interface boundaries placed near the CFD acoustic source regions. Both simulations are executed simultaneously with coordinated boundary condition data exchange.

Liever, Peter↗
DOE OSTI2025

Numerical simulation of compressible fluid-dynamics in the chamber of inertial fusion energy systems

Here, this paper aims to establish new and innovative modeling capabilities for analyzing chambers in Inertial Fusion Energy (IFE) systems. IFE is emerging as a promising method to achieve fusion power production, but several challenges must be overcome to develop an IFE pilot plant or deploy commercial IFE systems. These challenges are both theoretical and technical, encompassing a deeper understanding of the underlying physical phenomena and the development of new technologies and materials. One of the needs is to develop mathematical models to describe IFE systems and numerical tools to simulate them. This paper contributes to this endeavor by presenting a new OpenFOAM solver for IFE systems, focusing on gas dynamics in their chambers. The analysis and development of chamber designs will play a significant role in the transition from single-shot experiments to high-repetition rates, as there is a need to protect the chamber walls from the intense radiation fields produced by fusion reactions. A promising design option, normally referred to as thick wall chamber design, consists in using lithium or molten salt jet arrays within the chamber. A critical phenomenon is the venting of high-pressure gases from the center to the external part of the chamber, passing through the blanket array. This process involves the propagation and attenuation of strong pressure waves, requiring suitable modeling approaches for compressible fluid-dynamics. The solver proposed in this work implements a multi-material hydrodynamics model tailored to accurately describe the non-linear propagation of pressure waves while avoiding numerical oscillation issues typical of high-velocity compressible simulation. This solver is verified against numerical test cases, validated against experimental data, and applied to the analysis of the High-Yield Lithium-Injection Fusion-Energy (HYLIFE-I) concept. The relevance of this paper is threefold. Firstly, it contributes to developing and testing modeling approaches for compressible fluid-dynamics phenomena, with specific focus on the new and unexplored topic of IFE thick-liquid-wall blanket modeling. Secondly, it marks one of the first applications of the OpenFOAM library in the research field of IFE systems. Finally, the investigated problem is of practical interest for IFE developers, as it provides useful indications about relevant phenomena in pressure wave propagation in the chamber of these systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Implicit fast sweeping method for hyperbolic systems of conservation laws

Implicit time-accurate methods are often used to integrate stiff problems where explicit schemes impose severe time step restrictions. This paper presents an efficient numerical framework based on the Fast Sweeping Method (FSM) for solving linear and nonlinear hyperbolic systems of conservation laws. The solution at each discrete location is computed by sweeping the numerical domain in several predetermined directions that follow the causality of the characteristic families. The use of a fractional step strategy eliminates the need for a solution selection criterion while one-sided stencils limit the number of sweeps to at most 2 d for d space dimensions. This work focuses on the first-order implicit upwind method since it constitutes the building block for high-order conservative schemes. For problems where the degree of stiffness evolves over time, implicit-explicit hybridization can be accomplished with the same algorithm by simply switching the stencil at each time level. As opposed to traditional implicit solvers, the sweeping method does not require a local time linearization of the fluxes thereby preserving the nonlinear stability properties of the original implicit scheme. It also avoids the large computational and memory requirements associated with solving large block-diagonal systems of equations. Here, a series of one- and two-dimensional test cases are presented for the inviscid Burgers' equation and the reactive Euler equations. The results indicate that the implicit FSM can allow a major reduction in the number of time steps even in the presence of discontinuous solution profiles.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Sparse Cholesky factorization for solving nonlinear PDEs via Gaussian processes

In recent years, there has been widespread adoption of machine learning-based approaches to automate the solving of partial differential equations (PDEs). Among these approaches, Gaussian processes (GPs) and kernel methods have garnered considerable interest due to their flexibility, robust theoretical guarantees, and close ties to traditional methods. They can transform the solving of general nonlinear PDEs into solving quadratic optimization problems with nonlinear, PDE-induced constraints. However, the complexity bottleneck lies in computing with dense kernel matrices obtained from pointwise evaluations of the covariance kernel, and its partial derivatives, a result of the PDE constraint and for which fast algorithms are scarce. The primary goal of this paper is to provide a near-linear complexity algorithm for working with such kernel matrices. We present a sparse Cholesky factorization algorithm for these matrices based on the near-sparsity of the Cholesky factor under a novel ordering of pointwise and derivative measurements. The near-sparsity is rigorously justified by directly connecting the factor to GP regression and exponential decay of basis functions in numerical homogenization. We then employ the Vecchia approximation of GPs, which is optimal in the Kullback-Leibler divergence, to compute the approximate factor. This enables us to compute ϵ-approximate inverse Cholesky factors of the kernel matrices with complexity O(N log d (N/ϵ)) in space and O(N log 2d (N/ϵ)) in time. We integrate sparse Cholesky factorizations into optimization algorithms to obtain fast solvers of the nonlinear PDE. We numerically illustrate our algorithm’s near-linear space/time complexity for a broad class of nonlinear PDEs such as the nonlinear elliptic, Burgers, and Monge-Ampère equations. In summary, we provide a fast, scalable, and accurate method for solving general PDEs with GPs and kernel methods.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2009

Three-dimensional Finite Element Formulation and Scalable Domain Decomposition for High Fidelity Rotor Dynamic Analysis

This paper has two objectives. The first objective is to formulate a 3-dimensional Finite Element Model for the dynamic analysis of helicopter rotor blades. The second objective is to implement and analyze a dual-primal iterative substructuring based Krylov solver, that is parallel and scalable, for the solution of the 3-D FEM analysis. The numerical and parallel scalability of the solver is studied using two prototype problems - one for ideal hover (symmetric) and one for a transient forward flight (non-symmetric) - both carried out on up to 48 processors. In both hover and forward flight conditions, a perfect linear speed-up is observed, for a given problem size, up to the point of substructure optimality. Substructure optimality and the linear parallel speed-up range are both shown to depend on the problem size as well as on the selection of the coarse problem. With a larger problem size, linear speed-up is restored up to the new substructure optimality. The solver also scales with problem size - even though this conclusion is premature given the small prototype grids considered in this study.

Datta, Anubhav↗