Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERCHANGEABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Density and Velocity Fluctuations of Alpha Particles in Magnetic Switchbacks

Magnetic switchbacks, or sudden reversals in the magnetic field’s radial direction, are one of the more striking observations of the Parker Solar Probe (PSP) in its mission thus far. While their precise production mechanisms are still unknown, the two main theories are via interchange reconnection events and in situ generation. In this work, density and abundance variations of alpha particles are studied inside and outside individual switchbacks. We find no consistent compositional differences in the alpha particle abundance ratio, nαp, inside versus outside switchbacks, nor do we observe any signature when separating the switchbacks according to Vαp/Vpw, the ratio of the alpha–proton differential speed to the wave phase speed (the speed at which the switchback is traveling). We argue that these measurements cannot be used to rule in favor of one production mechanism over the other, due to the distance between PSP and the postulated interchange reconnection events. In addition, we examine the 3D velocity fluctuations of protons and alpha particles within individual switchbacks. While switchbacks are always associated with increases in proton velocity, alpha velocities may be enhanced, unchanged, or decrease. This is due to the interplay between Vpw and Vαp, with the Alfvénic motion of the alpha particles vanishing as the difference |Vpw – Vαp| decreases. We show how the Alfvénic motion of both the alphas and the protons through switchbacks can be understood as an approximately rigid arm rotation about the location of the wave frame, and illustrate that the wave frame can therefore be estimated using particle measurements alone, via sphere fitting.

Michael D. McManus↗
DOE OSTI2013

Environmental remediation following the Fukushima-Daiichi accident

A wide area of Fukushima Prefecture was contaminated with radioactivity released by the Fukushima Daiichi nuclear accident. The decontamination pilot projects conducted by JAEA aimed at demonstrating the applicability of different techniques to rehabilitate affected areas. As most radioactive cesium is concentrated at the top of the soil column and strongly bound to mineral surfaces, there are 3 options left to decrease the gamma dose rate (usually measured 1 m above the ground surface): the stripping of the contaminated topsoil (i.e. direct removal of cesium), the dilution by mixing and the soil profile inversion. The last two options do not generate waste. As the half-distance of {sup 137}Cs gammas in soil is in the order of 5-6 cm (depending on density and water content), the shielding by 50 cm of uncontaminated deep soil would theoretically reduce gamma doses by about 3 orders of magnitude. Which option is employed depends basically on the Cesium concentration in the topsoil, averaged over a 15-cm thickness. The JAEA's decontamination pilot projects focus on soil profile inversion and topsoil stripping. Two different techniques have been tested for the soil profile inversion: one is the reversal tillage by which surface soil of thickness of several tens of cm is reversed by using a tractor plough and the other is the complete interchanging of contaminated topsoil with uncontaminated subsoil by using a back-hoe. Reversal tillage with a tractor plough cost about 30 yen/m{sup 2}, which is an order of magnitude lower than that of topsoil-subsoil interchange (about 300 yen/m{sup 2}). Topsoil stripping is significantly more costly (between 550 yen/m{sup 2} and 690 yen/m{sup 2} according to the equipment used)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2013

A new compact fixed-point blackbody furnace

More and more NMIs are realizing their primary scale themselves with fixed-point blackbodies as their reference standard. However, commercially available fixed-point blackbody furnaces of sufficient quality are not always easy to obtain. CHINO Corp. and NMIJ, AIST jointly developed a new compact fixed-point blackbody furnace. The new furnace has such features as 1) improved temperature uniformity when compared to previous products, enabling better plateau quality, 2) adoption of the hybrid fixed-point cell structure with internal insulation to improve robustness and thereby to extend lifetime, 3) easily ejectable and replaceable heater unit and fixed-point cell design, leading to reduced maintenance cost, 4) interchangeability among multiple fixed points from In to Cu points. The replaceable cell feature facilitates long term maintenance of the scale through management of a group of fixed-point cells of the same type. The compact furnace is easily transportable and therefore can also function as a traveling standard for disseminating the radiation temperature scale, and for maintaining the scale at the secondary level and industrial calibration laboratories. It is expected that the furnace will play a key role of the traveling standard in the anticipated APMP supplementary comparison of the radiation thermometry scale.

42 ENGINEERING↗
DOE OSTI2015

Comparison of the Marcus and Pekar partitions in the context of non-equilibrium, polarizable-continuum solvation models

The Marcus and Pekar partitions are common, alternative models to describe the non-equilibrium dielectric polarization response that accompanies instantaneous perturbation of a solute embedded in a dielectric continuum. Examples of such a perturbation include vertical electronic excitation and vertical ionization of a solution-phase molecule. Here, we provide a general derivation of the accompanying polarization response, for a quantum-mechanical solute described within the framework of a polarizable continuum model (PCM) of electrostatic solvation. Although the non-equilibrium free energy is formally equivalent within the two partitions, albeit partitioned differently into “fast” versus “slow” polarization contributions, discretization of the PCM integral equations fails to preserve certain symmetries contained in these equations (except in the case of the conductor-like models or when the solute cavity is spherical), leading to alternative, non-equivalent matrix equations. Unlike the total equilibrium solvation energy, however, which can differ dramatically between different formulations, we demonstrate that the equivalence of the Marcus and Pekar partitions for the non-equilibrium solvation correction is preserved to high accuracy. Differences in vertical excitation and ionization energies are <0.2 eV (and often <0.01 eV), even for systems specifically selected to afford a large polarization response. Numerical results therefore support the interchangeability of the Marcus and Pekar partitions, but also caution against relying too much on the fast PCM charges for interpretive value, as these charges differ greatly between the two partitions, especially in polar solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Improving Precision in Selective Assembly

A method is proposed for calculating the limiting deviation and group tolerances when group interchangeability (selective assembly) is used. The example considered is increase in precision of the gap in the joint between a hydraulic cylinder and the piston rod.

42 ENGINEERING↗
NASA NTRS1994

(abstract) SEQ_POINTER: Next Generation, Planetary Spacecraft Remote Sensing Science Observation Design Tool

Implementation of a multimission tool, SEQ_POINTER, under the auspices of the JPL Multimission Operations Systems Office (MOSO) is in progress. This version has been designed to address the limitations experienced on previous versions when being adopted to a new mission and spacecraft. The tool has been modularly designed with subroutine interface structures to support interchangeable celestial body and spacecraft definition models. The computational and graphics modules have also been designed to interface with data collected from previous spacecraft, or on-going observations, which describe the surface of each target body. These enhancements make SEQ_POINTER a candidate for low-cost mission usage, when a remote sensing science observation design capability is required.

remote↗
DOE OSTI2014

Turbulent plasma transport across the Earth's low-latitude boundary layer: NAKAMURA AND DAUGHTON

The Kelvin-Helmholtz instability is a key process for the transport of solar wind plasma into the Earth's magnetosphere when the interplanetary magnetic field (IMF) is northward. Previous kinetic simulations for symmetric layers have demonstrated that the flow vortices compress the magnetopause current layer and induce magnetic reconnection, leading to the rapid streaming of solar wind plasma into the vortices along newly reconnected field lines. Using fully kinetic 3-D simulations, we demonstrate that the inherent density asymmetry across the boundary layer leads to a spectrum of oblique interchange instabilities along the magnetospheric side of the vortices. These secondary instabilities give rise to turbulence, which transports the solar wind plasma originally stored within the flow vortices deep into the magnetosphere. Simple estimates suggest that this turbulent transport may contribute significantly to the formation of the Earth's low-latitude boundary layer and the cold-dense plasma sheet during prolonged periods of northward IMF.

58 GEOSCIENCES↗
DOE OSTI2017

Tectonic tremor and LFEs on a reverse fault in Taiwan

In this paper, we compare low-frequency earthquakes (LFEs) from triggered and ambient tremor under the southern Central Range, Taiwan. We apply the PageRank algorithm used by Aguiar and Beroza (2014) that exploits the repetitive nature of the LFEs to find repeating LFEs in both ambient and triggered tremor. We use these repeaters to create LFE templates and find that the templates created from both tremor types are very similar. To test their similarity, we use both interchangeably and find that most of both the ambient and triggered tremor match the LFE templates created from either data set, suggesting that LFEs for both events have a common origin. Finally, we locate the LFEs by using local earthquake P wave and S wave information and find that LFEs from triggered and ambient tremor locate to between 20 and 35 km on what we interpret as the deep extension of the Chaochou-Lishan Fault.

58 GEOSCIENCES↗
DOE OSTI2017

SAPS-associated explosive brightening on the dusk-side: A new type of onset-like disturbance: A new type of onset-like disturbance

Quasi-periodic energetic particle injections have been observed at geosynchronous orbit on the dusk-side during a steady magnetospheric convection event. Here, we examine high resolution auroral imager data and ground magnetometer data associated with the first of these injections and conclude that it was not associated with classical substorm signatures. It is proposed that these injections are caused by the explosive non-linear growth of a shear-flow-ballooning instability in the region where sub-auroral polarization streams (SAPS) also occur. It is suggested that interchange will occur preferentially in the low-conductivity SAPS region since the magnetic Richardson number is lowest there and the ‘line-tying’ effect will also be least stabilizing there. We also propose that the observed particle injection signatures and auroral morphology constitute a new type of SAPS-associated explosive ‘onset-like’ disturbance that can occur during intervals of strong convection.

58 GEOSCIENCES↗
DOE OSTI2018

Comparative studies of glycolytic pathways and channeling under in vitro and in vivo modes

This study constructed cell‐free glycolytic enzyme systems and compared them to their in vivo functions in Escherichia coli . Under in vitro conditions, flux regulation followed enzyme concentrations and kinetics. In E. coli, only one of the isozymes of phosphofructokinase (PfkA) and fructose‐bisphosphate aldolase (FbaA) facilitate Embden‐Meyerhof‐Parnas (EMP) flux, but under in vitro assays, these isozymes were interchangeable. Additionally, in vitro introduction of the Entner–Doudoroff (ED) pathway improved glycolysis rates, while in vivo overexpression of the ED pathway could not capture significant flux unless its phosphotransferase system (PTS) was knocked out. Lastly, in vivo dynamic 13 C‐experiments revealed that the labeling order of EMP pathway intermediates was not strictly cascade, indicating intracellular metabolites were not well mixed. These enigmatic observations cannot be fully explained by thermodynamics or substrate level regulations. This article supports the long‐time conjecture that EMP enzymes are channeled, and the PTS may be an anchor point to initiate enzyme assemblies. © 2018 American Institute of Chemical Engineers AIChE J , 65: 483–490, 2019

Abernathy, Mary H.↗
DOE OSTI2024

Narrowing lab–to–market gaps: Device innovations in fuel generation, solar–cell, and photodetection

Academic translational research efforts to industry are often an underlying sought–after goal among various researchers. Through the interchanges of research endeavors between academia–industry, great innovations can/has been achieved that cater to the real–world application by bridging “industrially relevant” problem solving with pursuing fundamental studies. It is pertinent that most of the studies from university–level research works may not translate into demonstrable market products due to various reasons. Funding support, individual researcher goals, socioeconomic factors, and most importantly the technical know–how of generating revenue strategies for startups, are a few of the factors that have slowed the pace of collaborative efforts. However, we believe that the most crucial component is the identification of the critical parameters that solve long–standing problems that hinder the scale–up of the lab scale research into marketable products considering the techno–economic analysis. Here, to illustrate this, we take the three most relevant examples of devices for fuel generation, devices to utilize solar radiation, and devices for detection and other related applications. In this perspective, we provide an in–depth case study of each of these critical parameters to comment on the direction of research avenues that can serve as step–stones for the commercialization of university–level lab research studies.

42 ENGINEERING↗
DOE OSTI2013

The Aqueous Ca2+ System, in Comparison with Zn2+, Fe3+, and Al3+: An Ab Initio Molecular Dynamics Study

Results of Ab Initio Molecular Dynamics (AIMD) simulations of a Ca2+ ion in an aqueous environment (64 waters, 38ps=5ps equilibration + 33ps data collection, 300K) are reported. The 1st hydration shell contains 6-7 waters with d(OH) = 0.97Å (identical to our bulk water estimate) and average tilt angle, I = 32º. The 1st maximum in the radial distribution function occurs at GCaO(r) = 2.45Å. Our results compare well with published experimental structural data from X-Ray Absorption (XAFS) and Neutron Diffraction. We also generate simulated XAFS spectra using a 1st principles MD-XAFS procedure and show quantitative agreement with experimental XAFS data from a 0.2m Ca(ClO4)2 aqueous solution. The Ca2+ 1st shell water dipole moment of 3.1D is identical to our bulk water estimate (3.1D). The structured 2nd hydration shell, composed of ~16.5 waters, has a maximum at GCaO(r) =4.6Å. The average 2nd shell dipole moment = 2.9D, is suppressed relative to bulk water values. Detailed H-bond analysis demonstrates the waters in this shell predominately coordinate 1st shell waters with a trigonally structured H-bond network. Two exchanges between the 1st hydration shell and the bulk were observed. These were consistent with a dissociative and dissociative interchange Eigen-Wilkins ligand exchange mechanism. Many transfers between the 2nd shell and bulk are detected for Ca2+ allowing an estimation of the 2nd shell mean residence time (MRT) of 4.6ps. Comparison of the Ca2+ hydration shell structure and dynamics with those of the recently reported Zn2+, Fe3+ and Al3+ cation species show that the 1st and 2nd hydration shell parameters, d(M-OI) distance, CNII, H-bond d(OI-OII) distance and %Tetrahedral structure are correlated with cation charge density, the ratio of cation charge (Z) and size (Rion). However, important exceptions are d(M-OII) and the 2nd shell Mean Residence Time (MRT). These differences are explained in terms of the 1st shell structure parameters (d(M-OI) distance and tilt angle I which are strongly influenced by the valence electronic structure of the Ca2+, Zn2+, Fe3+, and Al3+ cation species. The average 2nd shell dipole moment for all cations are found to be suppressed relative to bulk water.

Ab Initio Molecular Dynamics↗
DOE OSTI2024

JAMES BUTTLE REVIEW: Interflow, subsurface stormflow and throughflow: A synthesis of field work and modelling

Interflow, throughflow and subsurface stormflow are interchangeable terms that refer to the lateral subsurface flow above a restricting layer of lower hydraulic conductivity that occurs during and following storm events. Interflow (used here) is a more dominant process in steeper catchments with high infiltration capacity soils overlying a more impermeable soil or geologic layer. Interflow as a runoff process was first recognised in the early 1900s, yet hydrologists still struggle to predict its occurrence, persistence, importance, interaction with other streamflow generation processes, and potential to connect to valleys and streams during and following storms. We review the history of interflow research and address some of the challenges in understanding its role in runoff production. We argue that characterising the controls on interflow initiation and occurrence relies on detailed field observations of subsurface properties, which exist only in limited experimental settings. This data shortcoming contributes to our inability to predict interflow or determine its contribution to streamflow more broadly. There remain many opportunities to advance our understanding of interflow that include both modelling and experimental or observational approaches in hydrology.

hillslope hydrology↗
DOE OSTI2018

Higgs portals for thermal Dark Matter. EFT perspectives and the NMSSM

We analyze a low energy effective model of Dark Matter in which the thermal relic density is provided by a singlet Majorana fermion which interacts with the Higgs fields via higher dimensional operators. Direct detection signatures may be reduced if blind spot solutions exist, which naturally appear in models with extended Higgs sectors. Explicit mass terms for the Majorana fermion can be forbidden by a $Z_3$ symmetry, which in addition leads to a reduction of the number of higher dimensional operators. Moreover, a weak scale mass for the Majorana fermion is naturally obtained from the vacuum expectation value of a scalar singlet field. The proper relic density may be obtained by the $s$-channel interchange of Higgs and gauge bosons, with the longitudinal mode of the $Z$ boson (the neutral Goldstone mode) playing a relevant role in the annihilation process. This model shares many properties with the Next-to-Minimal Supersymmetric extension of the Standard Model (NMSSM) with light singlinos and heavy scalar and gauge superpartners. In order to test the validity of the low energy effective field theory, we compare its predictions with those of the ultraviolet complete NMSSM. Extending our framework to include $Z_3$ neutral Majorana fermions, analogous to the bino in the NMSSM, we find the appearance of a new bino-singlino well tempered Dark Matter region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Predictive Dirac neutrino spectrum with strong CP solution in SU(5)L × SU(5)R unification

Abstract We develop a grand unified theory of matter and forces based on the gauge symmetry SU(5) L × SU(5) R with parity interchanging the two factor groups. Our main motivation for such a construction is to realize a minimal GUT embedding of left-right symmetric models that provide a parity solution to the strong CP problem without the axion. We show how the gauge couplings unify with an intermediate gauge symmetry SU(3) cL × SU(2) 2L × U(1) L × SU(5) R , and establish its consistency with proton decay constraints. The model correctly reproduces the observed fermion masses and mixings and leads tonaturally light Dirac neutrinoswith their Yukawa couplings suppressed by a factorM I /M G , the ratio of the intermediate scale to the GUT scale. We call this mechanism type II-Dirac seesaw. Furthermore, the model predictsδ CP = ±(130.4±1.2)° and$${m}_{{\nu }_{1}}$$= (4.8 – 8.4) meV for the Dirac CP phase and the lightest neutrino mass. We demonstrate how the model solves the strong CP problem via parity symmetry.

Physics↗
DOE OSTI2023

S-duality in $ T\overline{T} $-deformed CFT

$ T\overline{T} $ deformed conformal field theories can be reformulated as worldsheet theories of non-critical strings. We use this correspondence to compute and study the $ T\overline{T} $ deformed partition sum of a symmetric product CFT. We find that it takes the form of a partition sum of a second quantized string theory with a worldsheet given by the product of the seed CFT and a gaussian sigma model with the two-torus as target space. We show that deformed symmetric product theory admits a natural UV completion that exhibits a strong weak coupling Z 2 duality that interchanges the momentum and winding numbers and maps the $ T\overline{T} $-coupling λ to its inverse 1/λ. The Z 2 duality is part of a full O(2, 2, Z)-duality group that includes a PSL(2, Z) acting on the complexified $ T\overline{T} $ coupling. The duality symmetry eliminates the appearance of complex energies at strong coupling for all seed CFTs with central charge c ≤ 6.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗