Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hydride”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Wavelength dependent photochemistry of an iron dinitrogen hydride complex via multiple spectroscopies – competing ejection of axial ligands

Nitrogenase (N 2 ase) is a critical enzyme which catalyzes the reaction of N 2 → NH 3 in nature. Studies on the spectroscopy and photochemistry of trans-[Fe II (DMeOPrPE) 2 (N 2 )H][BPh 4 ] (1) and its isotopologues (2–6) provide a possible first step to evaluate the geometries and properties of the real N 2 ase–N 2 structure(s). In this article, we have used FT-IR, FT-Raman, synchrotron-based nuclear resonant vibrational spectroscopy (NRVS) and DFT calculations to examine and assign the normal modes of these complexes. In addition, we have monitored their wavelength dependent photochemistry using mid-IR, near-IR, NRVS, and Mössbauer spectroscopies. Two distinct photolysis pathways are observed with mid-IR at (nominal) 4 K – (1) the cleavage of Fe–N 2 bond in UV or visible light photolyses, which presents a unipolar disappearance of the N 2 peak at 2094 cm −1 and is recombinable; (2) the ejection of trans hydrogen atom with UV irradiation, which has a pair of bipolar peaks with the disappearance of N 2 at 2094 cm −1 and the appearance of a new species at 2056 cm −1 and is non-recombinable. The latter peak is well aligned with the N 2 peak in an Fe I reference complex (7). The combination of mid IR monitored photolysis/recombination and NRVS monitored photolysis form the central evidence for the conclusions in this article. In particular, the Fe II –N 2 and Fe I –H·dissociations are in competition with each other in UV or UV-inclusive photolyses of this dinitrogen hydride complex. In addition, near-IR and Mössbauer also provide consistent evidence about Fe I . This wavelength dependent photochemical work is the first one on a reaction active N 2 ase–N 2 model complex and it also demonstrates the competition ejection between two axial ligands (H· and N 2 ). It offers valuable information for future studies on real N 2 ase–N 2 and its photolysis products.

Dong, Weibing [Liaoning Normal University (China)]↗

Stability of hydrides in sub-Neptune exoplanets with thick hydrogen-rich atmospheres

Many sub-Neptune exoplanets have been believed to be composed of a thick hydrogen-dominated atmosphere and a high-temperature heavier-element-dominant core. From an assumption that there is no chemical reaction between hydrogen and silicates/metals at the atmosphere–interior boundary, the cores of sub-Neptunes have been modeled with molten silicates and metals (magma) in previous studies. In large sub-Neptunes, pressure at the atmosphere–magma boundary can reach tens of gigapascals where hydrogen is a dense liquid. A recent experiment showed that hydrogen can induce the reduction of Fe 2+ in (Mg,Fe)O to Fe 0 metal at the pressure–temperature conditions relevant to the atmosphere–interior boundary. However, it is unclear whether Mg, one of the abundant heavy elements in the planetary interiors, remains oxidized or can be reduced by H. Our experiments in the laser-heated diamond-anvil cell found that heating of MgO + Fe to 3,500 to 4,900 K (close to or above their melting temperatures) in an H medium leads to the formation of Mg 2 FeH 6 and H 2 O at 8 to 13 GPa. At 26 to 29 GPa, the behavior of the system changes, and Mg–H in an H fluid and H 2 O were detected with separate FeH x . The observations indicate the dissociation of the Mg–O bond by H and subsequent production of hydride and water. Therefore, the atmosphere–magma interaction can lead to a fundamentally different mineralogy for sub-Neptune exoplanets compared with rocky planets. The change in the chemical reaction at the higher pressures can also affect the size demographics (i.e., “radius cliff”) and the atmosphere chemistry of sub-Neptune exoplanets.

58 GEOSCIENCES↗

Metallic and complex hydride-based electrochemical storage of energy

Abstract The development of efficient storage systems is one of the keys to the success of the energy transition. There are many ways to store energy, but among them, electrochemical storage is particularly valuable because it can store electrons produced by renewable energies with a very good efficiency. However, the solutions currently available on the market remain unsuitable in terms of storage capacity, recharging kinetics, durability, and cost. Technological breakthroughs are therefore expected to meet the growing need for energy storage. Within the framework of the Hydrogen Technology Collaboration Program—H 2 TCP Task-40, IEA’s expert researchers have developed innovative materials based on hydrides (metallic or complex) offering new solutions in the field of solid electrolytes and anodes for alkaline and ionic batteries. This review presents the state of the art of research in this field, from the most fundamental aspects to the applications in battery prototypes.

Cuevas, Fermin (ORCID:0000000290555880)↗

Analysis of GaAs Solar Cells Grown on 50 mm Wafers at 700 degrees C by Dynamic Hydride Vapor Phase Epitaxy

We grew and analyzed GaAs photovoltaics devices grown by dynamic hydride vapor phase epitaxy (D-HVPE) on 50 mm GaAs substrates. These were grown at 700 degrees C in a kinetically-limited growth regime. These devices exhibited nearly identical performance to our previous single-junction GaAs devices (>25% efficiency) that were grown at 650 degrees C in a transport-limited growth regime. We determined that the relatively low non-uniformity in device efficiency was not related to variations in structural characteristics, such as GaAs base thickness or Ga x In 1-x P composition or thickness, but rather uniformity of the absorber doping. These results show that growth of high quality material is possible in multiple growth regimes by D-HVPE.

14 SOLAR ENERGY↗

High Performance GaAs Solar Cells Grown at High Growth Rates by Atmospheric-Pressure Dynamic Hydride Vapor Phase Epitaxy

We report GaAs solar cells grown at rates exceeding 300 um/h by atmospheric-pressure dynamic hydride vapor phase epitaxy (D-HVPE). The surface morphology of the GaAs layers grown at those rates is smooth, with root mean square surface roughness of < 1.4 nm. We grew GaAs solar cells at rates from 35 - 309 um/h with negligible degradation in open circuit voltages (VOC), which ranged from 1.04 - 1.07 V. We showed the slight decrease in VOC is due to lack of doping optimization at higher growth rates. Deep level transient spectroscopy measurements showed low point defect densities that increases slightly with growth rate from 35 - 309 um/h. The low point defect concentrations and the high VOCs indicate that high material quality can be maintained at these extremely high growth rates, enabling the deposition of high efficiency cells in mere seconds instead of hours.

14 SOLAR ENERGY↗

Effect of Doping Density on the Performance of Metamorphic GaInAs Solar Cells Grown by Dynamic Hydride Vapor Phase Epitaxy

We study the effect of doping density on the performance of inverted metamorphic ~1 eV GaInAs solar cells grown by dynamic hydride vapor phase epitaxy. We find that the doping efficiency of Se in this material is extremely high, with 5x10 17 cm -3 being the lowest controlled value we could achieve with our present Se source. We compared rear heterojunction devices grown with intentional n-doping of 5x10 17 cm -3 and unintentional n-doping of 5x10 15 cm -3 . The intentionally doped sample exhibited an open circuit voltage ~80 mV higher than the unintentionally doped sample due to reduced dark current, and a bandgap voltage offset, or W OC , of 0.407 V. We believe that future doping optimization will improve carrier collection and W OC in these devices.

GaAs↗

Control of CuPt Ordering in GaInP Grown by Hydride Vapor Phase Epitaxy

We investigate the degree of ordering present in GaInP layers grown by dynamic hydride vapor phase epitaxy (D-HVPE) as a function of various growth conditions. We assess order parameter from both transmission electron and x-ray diffraction and compare these trends to the order parameter estimated by the photoluminescence-determined band gap in the GaInP layers. The degree of ordering increases with deposition temperature and the ratio of gas-phase group V to group III precursors in the reactor. We also investigate the effect of growth rate, demonstrating the capability of HVPE to suppress order through rapid growth rates. Such ordering dependences are consistent with mechanisms established for ordering observed in GaInP grown by organometallic vapor phase epitaxy (OMVPE), but with weaker ordering than GaInP grown by that method.

growth↗

High-temperature carbon dioxide capture in a porous material with terminal zinc hydride sites

Carbon capture can mitigate point-source carbon dioxide (CO 2 ) emissions, but hurdles remain that impede the widespread adoption of amine-based technologies. Capturing CO 2 at temperatures closer to those of many industrial exhaust streams (>200°C) is of interest, although metal oxide absorbents that operate at these temperatures typically exhibit sluggish CO 2 absorption kinetics and instability to cycling. Here, in this study, we report a porous metal–organic framework featuring terminal zinc hydride sites that reversibly bind CO 2 at temperatures above 200°C—conditions that are unprecedented for intrinsically porous materials. Gas adsorption, structural, spectroscopic, and computational analyses elucidate the rapid, reversible nature of this transformation. Extended cycling and breakthrough analyses reveal that the material is capable of deep carbon capture at low CO 2 concentrations and high temperatures relevant to postcombustion capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of hydrided Pt-Ce-H sites in efficient, selective oxidation catalysts

Single-atom site catalysts can improve the rates and selectivity of many catalytic reactions. For this work, we have modified Pt 1 /CeO 2 single sites by combining them with molecular groups and with oxygen vacancies of the support. The new sites include hydrided (Pt 2+ -Ce 3+ Hδ) and hydroxylated (Pt 2+ -Ce 3+ OH) sites that exhibit higher reactivity and selectivity to previous single sites for several reactions, including a ninefold increase in the reaction rate for carbon monoxide (CO) oxidation, and a 2.3-fold improvement of propylene selectivity for oxidative dehydrogenation of propane. The atomic structure and reaction steps of these sites were determined with in situ and ex situ spectroscopy techniques and theoretical methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A compact furnace to support in situ neutron imaging of hydrogen dynamics in yttrium hydride moderators

A compact, nuclear microreactor that utilizes low-enriched uranium fuel is a promising solution to meet U.S. energy demands in nonconventional nuclear markets such as remote and decentralized energy grids. Yttrium hydride (YHx) is a potential moderator material for a microreactor design that reduces the amount of required fuel and provides superior retention of hydrogen at high reactor operating temperatures. Hydrogen diffusion properties in YHx are highly sought after for computer model validation and reactor prototyping. To characterize hydrogen diffusion, a compact dual-zone furnace was developed at Los Alamos National Laboratory and analyzed via neutron imaging at the Los Alamos Neutron Science Center (LANSCE). The goal of these measurements is to assess hydrogen diffusion in YHx samples as a function of applied temperature gradients. Included herein is recent progress in technique and furnace developments as well as initial results from concentration- and temperature-gradient measurements at LANSCE.

Torres, James↗

Enabling a Flexible Grid with Increased Penetration of DER: Techno-economic Analysis of Metal Hydride Thermochemical Energy Storage Integrated with Stirling Engine for Grid Energy Storage Applications

This report summarizes the results of a techno-economic assessment of the capital and operational expenses for 3 scenarios utilizing a TES/Stirling engine system which is charged by an electric heater to provide grid power and energy storage. While there are several integration possibilities and material choices that could be utilized in such systems, three difference scenarios were chosen for this assessment to reflect an anticipated deployment of the technology where each might require different TES system configurations. Additionally, an enhanced version of the HTMH is considered to demonstrate the expected impact on costs with further technology development. The predicted capital and operational LCOS for the system configurations range from $0.0198/kWhr e - $0.0734/kWhr e which compare positively to the LCOS for lithium ion battery storage ranging from $0.087/kWhr e – $0.329/kWhr e . The key drivers for cost improvements to the system are material property enhancements in the HTMH primarily related to reducing the costs associated with the HTMH vessel and heat exchangers. This analysis demonstrates the potential benefits and flexibility of integrating a Stirling engine with a metal hydride-based TES system and suggests that the MH TES technology, at its current level of development, provides a highly competitive alternative to lithium ion batteries for large scale grid energy storage applications.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Efficient and Safe Hydrogen Refueling of Fuel Cell Vehicles from an Emergency Chemical Hydride Storage Source

Zero-emissions hydrogen fuel cell electrical vehicles (FCEVs) have become more popular in recent years. However, the limited availability of hydrogen fueling stations is considered a critical barrier to sustainable adoption of hydrogen FCEV. To enable the widespread deployment and commercialization of hydrogen FCEV, the availability of hydrogen refueling stations needs to improve. One of the consequences of the lack of hydrogen refueling infrastructure is that consumers can suffer from “range anxiety”, meaning consumers would get anxious of running out of fuel during long-distance trip [4]. A practical solution is to provide a compact emergency hydrogen refueler that can be used if the consumer runs out of hydrogen before reaching the nearest hydrogen refueling station. A safe, compact, and user-friendly hydrogen refueler would give consumers the flexibility they need to feel comfortable using their hydrogen FCEV when planning a long-distance trip. Offering this product would alleviate range anxiety, and it would make Hydrogen FCEV a more attractive alternative to gasoline vehicles. The emergency hydrogen refueler consists of a lithium hydride bed that reacts with liquid water to produce hydrogen gas and lithium hydroxide.

08 HYDROGEN↗

Comparative Critical Mass Calculations for NNL and ENDF/B-VIII.0 Zirconium Hydride Thermal Scattering Laws [Slides]

Zirconium Hydride (ZrH x ) is a moderator material for TRIGA reactors and SNAP-10A.The thermal scattering has the behavior of quantum oscillator favorable for moderator feedback. ZrH x occurs as a corrosion product in LWR. Previously new phase specific TSL evaluations were generated and submitted to ENDF/B- VIII.1. These include the effects of crystal structure on elastic scattering of Zr(ZrH x ), permit flexibility in stoichiometry for use in reactor physics calculations and fuel characterization, and expand the TSL material sub-library. ENDF/B-VIII.0 ZrH TSLs do not distinguish between material phase. Current work involves preliminary validation & verification testing on the effect of TSLs on critical mass and associated thermal flux.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Downselection of Cladding Materials for Zirconium Hydride Moderator

This report complete Milestone M3.1.1 — “Cladding downselection: Team will report to ARPA-E on at least two down-selected cladding options—one metallic and one ceramic.” In this milestone, we systematically assess FeCrAl alloys and SiC-based cladding options for a zirconium hydride (ZrHx) moderator in terms of their neutronics, radiation stability, hydrogen permeability, chemical compatibility, and fabricability. The analysis shows that FeCrAl alloys are excellent candidate cladding materials for a ZrHx moderator given their proven radiation stability, acceptable compatibility with ZrHx, and industrially established fabricability. The relative high hydrogen permeability is manageable by introducing a thin layer of an Al 2 O 3 hydrogen permeation barrier on the external surface. The SiC-cladded ZrHx moderator is promising because of its outstanding neutronics performance, excellent radiation stability, and extremely low intrinsic hydrogen permeability. However, potential interactions of SiC and Zr and the challenge in achieving a hermetic SiC-based cladding require further investigation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advanced Fabrication Techniques of Metal Hydrides for Science and Technology Applications (Abbreviated Final Report)

Lithium Hydride (LiH) atomic properties make it an excellent candidate for thermal energy storage, hydrogen storage, and nuclear reactor technology. High Energy Density (HED) experiments on LiH at the National Ignition Facility (NIF) can also provide critical Equation of State (EOS) and Hugoniot data. Density requirements for LiH vary per application and therefore physical and structural requirements for LiH are non-uniform. Historical production of LiH relies on casting processesthat are limited by density and grain-size control, which leads to unfavorable machinable characteristics. LiH manufacturing is further hindered due to its chemical reactivity and propensity to readily react with moisture. This work aimed at exploring advanced fabrication techniques for LiH such as 1) uniaxial powder pressing methods and 2) laser powder bed fusion (L-PBF) additive manufacturing. Uniaxial powder compaction offers advantageous tailorable mechanical and physical properties via density control, and L-PBF can produce net-shaped complex parts with unique microstructure. Uniaxial pressing proved successful in readily producing LiH with density control.

36 MATERIALS SCIENCE↗

Advanced Fabrication Techniques of Metal Hydrides for Science and Technology Applications (Full Technical Report)

Lithium Hydride (LiH) atomic properties make it an excellent candidate for thermal energy storage, hydrogen storage, and nuclear reactor technology. High Energy Density (HED) experiments on LiH at the National Ignition Facility (NIF) can also provide critical Equation of State (EOS) and Hugoniot data. Density requirements for LiH vary per application and therefore physical and structural requirements for LiH are non-uniform. Historical production of LiH relies on casting processes that are limited by density and grain-size control, which leads to unfavorable machinable characteristics. LiH manufacturing is further hindered due to its chemical reactivity and propensity to readily react with moisture. This work aimed at exploring advanced fabrication techniques for LiH such as 1) uniaxial powder pressing methods and 2) laser powder bed fusion (L-PBF) additive manufacturing. Uniaxial powder compaction offers advantageous tailorable mechanical and physical properties via density control, and L-PBF can produce net-shaped complex parts with unique microstructure. Uniaxial pressing proved successful in readily producing LiH with density control.

36 MATERIALS SCIENCE↗

Ab initio study of the structure and properties of amorphous silicon hydride from accelerated molecular dynamics simulations

This paper presents a large-scale ab initio simulation study of amorphous silicon hydride (a-Si 1-x H x ) with an emphasis on the structure and properties of the material across a range of hydrogen concentration by combining accelerated molecular dynamics (MD) simulations with first-principles density-functional calculations. The accelerated MD scheme relied on classical metadynamics, which enabled the development of 2600+ high-quality structural models of a-Si 1-x H x , with system sizes ranging from 150 to 6,000 atoms and hydrogen concentrations vary from 6 to 20 at. %. The resulting amorphous networks were found to be completely free from any coordination defects and that they all exhibited a pristine band-gap in their electronic spectrum. The microstructural properties of hydrogen distributions were examined with great emphasis on the presence of isolated and clustered environments of hydrogen atoms. The results were compared with a suite of experimental data obtained from x-ray diffraction, infrared spectroscopy, spectroscopic ellipsometry and nuclear magnetic resonance studies.

36 MATERIALS SCIENCE↗