Results for “Hosting Capacity” — Page 20

DOE OSTI2019

Krypton storage capacity of the Earth's lower mantle

Noble gases are important geochemical tracers allowing reconstructing global volatile cycles in Earth's reservoirs. To constrain these fundamental processes, precise data on their partitioning behavior at deep Earth conditions are needed. Such data are only available at moderate pressures up to 25 GPa due to experimental challenges. We have investigated the possibility of noble gas storage in the Earth's lower mantle up to 115 GPa. We studied the incorporation of krypton in the second most abundant lower mantle mineral (Mg 1-x ,Fe x )O (ferropericlase) as well as in liquid metal-alloys by performing experiments up to 115 GPa and 3700 K using the laser-heated diamond anvil cell coupled to post-mortem EMPA analysis and X-ray absorption spectroscopy. The results reveal that, at these extreme conditions, up to 3 wt.% of krypton can be stored in (Mg 1-x ,Fe x )O and 3000 ppm in the Fe-rich liquid metal. For both phases the storage capacities increase with pressure (between 40 GPa and 60 GPa) at a constant high temperature of 2300 K. Fpc has never been considered as a NG host, despite being the second most abundant mineral in the Earth's LM. Using recent accurate compressibility data, we demonstrate that a substitution of krypton into the anion site of (Mg 1-x ,Fe x )O in form of neutral oxygen Schottky defects at diluted lower mantle conditions is possible. This noble gas incorporation mechanism is in agreement with a previous study on bridgmanite. We show that (Mg 1-x ,Fe x )O exhibits higher noble gas storage capacities than bridgmanite through the lower mantle using lattice strain modeling and including experimental solubility and thermoelastic data for neon, argon, krypton and xenon. We also demonstrate that both phases exhibit the highest solubilities for argon and krypton. We used the solubility data from lattice strain modeling to predict noble gas abundances stored in the solid lower mantle after magma ocean crystallization. The modeled abundances show apparent similarities with estimates for the deep noble gas reservoir that are based on either 3He abundances in ocean island basalts or radiogenic 40Ar abundances in the bulk Earth. This strongly indicates that the crystalline lower mantle may play an important role as deep noble gas storage reservoir. We propose, based on considerations on noble gas replenishment from the lower mantle to the atmosphere, that the lower mantle can only contribute to a small fraction of the present-day atmospheric noble gases. This suggests that the lower mantle is an un-degassed reservoir.

58 GEOSCIENCES↗

DOE OSTI2024

Equity Considerations in Siting Consolidated Interim Storage Facilities for Commercial Spent Nuclear Fuel

Questions of equity and fairness are often raised by representatives from State, Tribal and local governments and members of the public when resolving conflicts over siting of nuclear facilities. However, the two terms are not synonymous: equity can be quantified while fairness is much more subjective. The Department of Energy's (DOE) December 2021 Request for Information sought input on how to site federal facilities for the temporary, consolidated storage of spent nuclear fuel (SNF) using a consent-based approach. It is anticipated that just such questions about equity and fairness associated with the potential emergence of more than one host site may be raised by the twelve groups of university, nonprofit and private sector partners (Consortia) working to support community engagement, inclusively involve stakeholders, build relationships, and develop innovative forms of mutual learning and public capacity to participate in the consent-based siting process for a federal consolidated interim storage facility during the current Planning & Capacity Building stage of the consent-based siting process. In terms of DOE's Integrated Waste Management System (IWMS), sociopolitical equity concepts are a factor in all aspects of IWMS development and operations and will be particularly applicable should two or more host sites become a possibility, either by the emergence of multiple volunteer hosts or by pursuit as a IWMS program strategy. This paper summarizes recent analyses that explore how four equity metrics - number of states, division of the projected SNF total by the year 2083, current population and land area - might be perceived by host communities, states and regions if two, three or four sites for hosting federal consolidated interim storage facilities were to be contemporaneously realized. Existing institutional arrangements, including Nuclear Regulatory Commission regions, Federal Energy Regulatory Commission regions and Low-Level Radioactive Waste Disposal Compacts, were selected to create hypothetically merged two, three and four-region scenarios to calculate how the four metrics balance out. Projected SNF burden was prioritized with regional contiguity of the consolidated regions a requirement for a functional scenario. The intent was not to promote or suggest any construct as a program objective; the configurations are geopolitical abstractions only to explore potential perceptions of equity. Understanding the possible issues of equity that could arise may benefit program efforts toward achieving a cooperative federalism wherein both the federal and multiple State governments share the goal of manifesting more than one federal consolidated interim storage facility. The main finding is that it is not possible to optimize for all four metrics simultaneously. The analyses demonstrate that trying to create a sense of equity by backfitting a solution to a random population and land distribution will always contain a degree of artificiality.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2026

Hydrophobic Metal–Organic Frameworks Enable Superior High-Pressure Ammonia Storage through Geometric Design

Hydrophobic metal–organic frameworks (MOFs) are typically overlooked for ammonia storage due to weak host–guest interactions. Here, we demonstrate that four structurally analogous aluminum-based MOFs exhibit a counterintuitive behavior whereby framework geometry, rather than ligand hydrophilicity, determines high-pressure NH 3 adsorption performance. The hydrophobic CAU-23 achieved an exceptional capacity matching hydrophilic analogs despite its poor low-pressure uptake. This pressure-dependent enhancement stems from the unique 4-cis-4-trans geometry of CAU-23 compared to the purely cis arrangement of MIL-160 and KMF-1 and the alternating cis-trans configuration of MOF-303. Critically, CAU-23 retained 95% capacity over three high-pressure cycles, whereas hydrophilic MOFs suffered 39–46% irreversible losses due to strong NH 3 -framework interactions that compromise structural integrity. Grand canonical Monte Carlo simulations reveal that high pressure enables NH 3 clustering through intermolecular hydrogen bonding, bypassing the need for strong host–guest interactions. High-pressure powder X-ray diffraction measurements confirm the exceptional mechanical resilience of CAU-23, showing complete structural recovery upon decompression despite exhibiting the highest pressure sensitivity among the studied MOFs. An extended analog, HE-CAU-23, validates this design principle with further enhanced capacity. Furthermore, these findings reveal a paradigm shift toward hydrophobic MOFs with optimized geometry for high-performance and regenerable gas storage applications.

MOFs↗

DOE OSTI2022

Investigation of Ca Insertion into α-MoO 3 Nanoparticles for High Capacity Ca-Ion Cathodes

Calcium-ion batteries (CIBs) are a promising alternative to lithium-ion batteries (LIBs) due to the low redox potential of calcium metal and high abundance of calcium compounds. Due to its layered structure, α-MoO 3 is regarded as a promising cathode host lattice. While studies have reported that α-MoO 3 can reversibly intercalate Ca ions, limited electrochemical activity has been noted, and its reaction mechanism remains unclear. Here, we re-examine Ca insertion into α-MoO 3 nanoparticles with a goal to improve reaction kinetics and clarify the storage mechanism. The α-MoO 3 electrodes demonstrated a specific capacity of 165 mA h g –1 centered near 2.7 V vs Ca 2+ /Ca, stable long-term cycling, and good rate performance at room temperature. Furthermore, this work demonstrates that, under the correct conditions, layered oxides can be a promising host material for CIBs and renews prospects for CIBs.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Engineering Terpene Production Pathways in Methylobacterium extorquens AM1

Terpenes are diverse specialized metabolites naturally found within plants and have important roles in inter-species communication, adaptation and interaction with the environment. Their industrial applications span a broad range, including fragrances, flavors, cosmetics, natural colorants to agrochemicals and therapeutics, yet formal chemical synthesis is economically challenging due to structural complexities. Engineering terpene biosynthesis could represent an alternative in microbial biotechnological workhorses, such as Saccharomyces cerevisiae or Escherichi coli, utilizing sugars or complex media as feedstocks. Host species that metabolize renewable and affordable carbon sources may offer unique sustainable biotechnological alternatives. Methylotrophs are bacteria with the capacity to utilize one-carbon feedstocks, such as methanol or formate. They colonize the phyllosphere (above-ground area) of plants, and many accumulate abundant carotenoid pigments. Methylotrophs have the capacity to take up and use a subset of the rare earth elements known as lanthanides. These metals can enhance one-carbon (methylotrophic) metabolism. Here, we investigated whether manipulating the metabolism enables and enhances terpene production. A carotenoid-deficient mutant potentially liberates carbon, which may contribute to bioproduct accumulation. To test this hypothesis, terpene-producing bacterial strains regulated by two distinct promoters were generated. Wildtype Methylobacterium extorquens, ∆Meta1_3665, a methylotrophic mutant lacking the carotenoid pathway, and an E. coli strain were transformed with an exogenous terpene pathway and grown both in the presence and absence of lanthanides. The extraction, and the comparison of analytical profiles, provided evidence that engineered cultured M. extorquens under control of a native, inducible methylotrophic promoter can yield the sesquiterpene patchoulol when supplemented with lanthanide. In contrast, using a moderate-strength constitutive promoter failed to give production. We demonstrated colonization of the phyllosphere with the engineered strains, supporting the future engineering of selected species of the plant microbiome and with promising implications for the synthetic biology of small molecules.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2019

Large-diameter and heteroatom-doped graphene nanotubes decorated with transition metals as carbon hosts for lithium–sulfur batteries

This work addresses here performance issues of lithium–sulfur (Li–S) batteries via retaining the polysulfide intermediates within a novel cathode nanocarbon host. Herein, we report a series of nitrogen and oxygen co-doped and transition metal-decorated large size (200–500 nm in diameter) graphene nanotubes (M-GNTs) (M = Co, Ni, and/or Fe) as effective carbon hosts for sulfur cathodes (S@M-GNTs) in Li–S batteries. The exceptionally large diameters of the graphene tubes allow facile diffusion of sulfur inside the tubes with sufficient loadings, yet leaving room for volume expansion during the lithiation process. The GNTs with the largest diameter and abundant N and O doping along with FeCoNi alloy decoration (FeCoNi-GNTs) exhibit the best sulfur cathode performance. In addition to the unique nanocarbon structures, the heteroatom dopants and transition metal nanoparticles likely also play promotional roles in retaining long-chain polysulfide discharge intermediates within the carbon host, therefore improving rate capability and cycle stability. In particular, a S@FeCoNi-GNT cathode with a high sulfur loading (~4.5 mg S cm -2 ) exhibits discharge capacities up to 1234.7 mA h g -1 at C/20 and 909.0 mA h g -1 at C/5. A discharge capacity of 554.4 mA h g -1 at 1C after 500 cycles was retained, further demonstrating its encouraging potential in Li–S batteries.

25 ENERGY STORAGE↗

DOE OSTI2018

The malaria parasite RhopH protein complex interacts with erythrocyte calmyrin identified from a comprehensive erythrocyte protein library

Highlights: • WGCFS generated protein libraries are useful in identification of host receptors. • Mouse calmyrin is PyRhopH complex RBC receptor in rodent malaria model, P. yoelii. • WGCFS and AlphaScreen technology are invaluable to post-genome malaria research. Malaria merozoite apical organelles; microneme and rhoptry secreted proteins play functional roles during and following invasion of host erythrocytes. Among numerous proteins, the rhoptries discharge high molecular weight proteins known as RhopH complex. Recent reports suggest that the RhopH complex is essential for growth and survival of the malaria parasite within erythrocytes. However, an in-depth understanding of the host-parasite molecular interactions is indispensable. Here we utilized a comprehensive mouse erythrocyte protein library consisting of 443 proteins produced by a wheat germ cell-free system, combined with AlphaScreen technology to identify mouse erythrocyte calmyrin as an interacting molecule of the rodent malaria parasite Plasmodium yoelii RhopH complex (PyRhopH). The PyRhopH interaction was dependent on the calmyrin N-terminus and divalent cation capacity. The finding unveils a recommendable and invaluable usefulness of our comprehensive mouse erythrocyte protein library together with the AlphaScreen technology in investigating a wide-range of host-parasite molecular interactions.

60 APPLIED LIFE SCIENCES↗

NASA NTRS1998

2-deoxy-D-glucose-induced metabolic stress enhances resistance to Listeria monocytogenes infection in mice

Exposure to different forms of psychological and physiological stress can elicit a host stress response, which alters normal parameters of neuroendocrine homeostasis. The present study evaluated the influence of the metabolic stressor 2-deoxy-D-glucose (2-DG; a glucose analog, which when administered to rodents, induces acute periods of metabolic stress) on the capacity of mice to resist infection with the facultative intracellular bacterial pathogen Listeria monocytogenes. Female BDF1 mice were injected with 2-DG (500 mg/kg b. wt.) once every 48 h prior to, concurrent with, or after the onset of a sublethal dose of virulent L. monocytogenes. Kinetics of bacterial growth in mice were not altered if 2-DG was applied concurrently or after the start of the infection. In contrast, mice exposed to 2-DG prior to infection demonstrated an enhanced resistance to the listeria challenge. The enhanced bacterial clearance in vivo could not be explained by 2-DG exerting a toxic effect on the listeria, based on the results of two experiments. First, 2-DG did not inhibit listeria replication in trypticase soy broth. Second, replication of L. monocytogenes was not inhibited in bone marrow-derived macrophage cultures exposed to 2-DG. Production of neopterin and lysozyme, indicators of macrophage activation, were enhanced following exposure to 2-DG, which correlated with the increased resistance to L. monocytogenes. These results support the contention that the host response to 2-DG-induced metabolic stress can influence the capacity of the immune system to resist infection by certain classes of microbial pathogens.

Non-NASA Center↗

DOE OSTI2017

Modulating supramolecular binding of carbon dioxide in a redox-active porous metal-organic framework

Hydrogen bonds dominate many chemical and biological processes, and chemical modification enables control and modulation of host–guest systems. Here in this paper we report a targeted modification of hydrogen bonding and its effect on guest binding in redox-active materials. MFM-300(V III ) {[V III 2 (OH) 2 (L)], LH 4 =biphenyl-3,3',5,5'-tetracarboxylic acid} can be oxidized to isostructural MFM-300(V IV ), [V IV 2 O 2 (L)], in which deprotonation of the bridging hydroxyl groups occurs. MFM-300(V III ) shows the second highest CO 2 uptake capacity in metal-organic framework materials at 298 K and 1 bar (6.0 mmol g -1 ) and involves hydrogen bonding between the OH group of the host and the O-donor of CO 2 , which binds in an end-on manner, OH∙∙∙ =1.863(1) Å. In contrast, CO 2 -loaded MFM-300(V IV ) shows CO 2 bound side-on to the oxy group and sandwiched between two phenyl groups involving a unique O CO$_2$ ···c.g.phenyl interaction [3.069(2), 3.146(3) Å]. Lastly, the macroscopic packing of CO 2 in the pores is directly influenced by these primary binding sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Establishing substitution rules of functional groups for high-capacity organic anode materials in Na-ion batteries

Tailoring molecular structures of organic electrode materials (OEMs) can enhance their performance in Na-ion batteries, however, the substitution rules and the consequent effect on the specific capacity and working potential remain elusive. Herein, by examining three sodium carboxylates with selective N substitution or extended conjugation structure, we exploited the correlation between structure and performance to establish substitution rules for high-capacity OEMs. Our results show that substitution position and types of functional groups are essential to create active centers for uptake/removal of Na+ and thermodynamically stabilize organic structures. Furthermore, rational host design and electrolytes modulation were performed to extend the cycle life to 500 cycles. A full cell based on the optimal 2,2’-bipyridine-4,4’-dicarboxylic acid disodium salt anode and the polyaniline cathode is demonstrated to confirm the feasibility of achieving all-organic batteries. Lastly, this work provides a valuable guideline for the design principle of high-capacity and stable OEMs for sustainable energy storage.

25 ENERGY STORAGE↗

DOE OSTI2021

Metal–Organic Framework Based Hydrogen-Bonding Nanotrap for Efficient Acetylene Storage and Separation

The removal of carbon dioxide (CO 2 ) from acetylene (C 2 H 2 ) is a critical industrial process for manufacturing high purity C 2 H 2 . However, it remains challenging to address the trade-off between adsorption capacity and selectivity, on account of their similar physical properties and molecular sizes. To overcome this difficulty, here we report a novel strategy involving the regulation of hydrogen-bonding nanotrap on the pore surface to promote the separation of C 2 H 2 /CO 2 mixtures, in three isostructural metal-organic frameworks (MOFs, named as MIL-160, CAU-10H, and CAU-23, respectively). Among them, MIL-160, which has abundant hydrogen-bonding acceptors as nanotraps, can selectively capture acetylene molecules and demonstrates ultra-high C 2 H 2 storage capacity (191 cm 3 g –1 , or 213 cm 3 cm –3 ) but much less CO 2 uptake (90 cm 3 g –1 ) under ambient conditions. The C 2 H 2 adsorption amount of MIL-160 is remarkably higher than the other two isostructural MOFs (86 cm 3 g –1 and 119 cm 3 g –1 for CAU-10H and CAU-23 respectively) under the same conditions. More importantly, both simulation and experimental breakthrough results show that MIL-160 sets a new benchmark for equimolar C 2 H 2 /CO 2 separation in terms of the separation potential (Δq break = 5.02 mol/kg) and C 2 H 2 productivity (6.8 mol/kg). In addition, in-situ FT-IR experiments combined with computational modeling further reveal that the unique host-guest multiple hydrogen-bonding interactions between the nanotrap and C 2 H 2 is the key factor for achieving extraordinary acetylene storage capacity and superior C 2 H 2 /CO 2 selectivity. Furthermore, this work provides a novel and powerful approach to address the trade-off of this extremely challenging gas separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

USAID Haiti Training Session #2: Introduction to Engage [Slides]

Welcome to Engage! Engage is a capacity expansion modeling tool supported by the National Renewable Energy Laboratory and based on the Calliope open-source capacity expansion model developed by the ETH Zurich University, maintained at the TU Delft University. Engage is an accessible (free, open-access, web-hosted) and flexible web-based energy system planning application for rapid multiple-energy-form energy system scenario exploration. Its cloud-based, collaborator-sharable data model, intuitive interface and visualization capabilities facilitate collaboration and communication among teams, with experts, and among diverse stakeholder groups exploring energy system implications from district to national-scale models. This training series was developed under USAID to empower Haitian stakeholders to explore modeling scenarios in Engage to develop a Haiti Energy Master Plan. This training series includes a general overview of how Engage works along with tailored exercises that target Haiti's specific energy needs, such as modeling the capacity expansion of the bulk power system, fuel scarcity challenges, the development of microgrids, and the economic viability of transmission strategies. See NREL/PR-7A40-89369 for the French translation of this document.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

USAID Haiti Training Session #3: Capacity Expansion [Slides]

Welcome to Engage! Engage is a capacity expansion modeling tool supported by the National Renewable Energy Laboratory and based on the Calliope open-source capacity expansion model developed by the ETH Zurich University, maintained at the TU Delft University. Engage is an accessible (free, open-access, web-hosted) and flexible web-based energy system planning application for rapid multiple-energy-form energy system scenario exploration. Its cloud-based, collaborator-sharable data model, intuitive interface and visualization capabilities facilitate collaboration and communication among teams, with experts, and among diverse stakeholder groups exploring energy system implications from district to national-scale models. This training series was developed under USAID to empower Haitian stakeholders to explore modeling scenarios in Engage to develop a Haiti Energy Master Plan. This training series includes a general overview of how Engage works along with tailored exercises that target Haiti's specific energy needs, such as modeling the capacity expansion of the bulk power system, fuel scarcity challenges, the development of microgrids, and the economic viability of transmission strategies. See NREL/PR-7A40-89365 for the French translation of this document.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

Session de formation de l'USAID en Haiti n2: Introduction a l'outil Engage [Slides]

Welcome to Engage! Engage is a capacity expansion modeling tool supported by the National Renewable Energy Laboratory and based on the Calliope open-source capacity expansion model developed by the ETH Zurich University, maintained at the TU Delft University. Engage is an accessible (free, open-access, web-hosted) and flexible web-based energy system planning application for rapid multiple-energy-form energy system scenario exploration. Its cloud-based, collaborator-sharable data model, intuitive interface and visualization capabilities facilitate collaboration and communication among teams, with experts, and among diverse stakeholder groups exploring energy system implications from district to national-scale models. This training series was developed under USAID to empower Haitian stakeholders to explore modeling scenarios in Engage to develop a Haiti Energy Master Plan. This training series includes a general overview of how Engage works along with tailored exercises that target Haiti's specific energy needs, such as modeling the capacity expansion of the bulk power system, fuel scarcity challenges, the development of microgrids, and the economic viability of transmission strategies. See NREL/PR-7A40-88836 for the English translation of this document.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

Seance de formation de l'USAID en Haiti n3: Expansion des capacites [Slides]

Welcome to Engage! Engage is a capacity expansion modeling tool supported by the National Renewable Energy Laboratory and based on the Calliope open-source capacity expansion model developed by the ETH Zurich University, maintained at the TU Delft University. Engage is an accessible (free, open-access, web-hosted) and flexible web-based energy system planning application for rapid multiple-energy-form energy system scenario exploration. Its cloud-based, collaborator-sharable data model, intuitive interface and visualization capabilities facilitate collaboration and communication among teams, with experts, and among diverse stakeholder groups exploring energy system implications from district to national-scale models. This training series was developed under USAID to empower Haitian stakeholders to explore modeling scenarios in Engage to develop a Haiti Energy Master Plan. This training series includes a general overview of how Engage works along with tailored exercises that target Haiti's specific energy needs, such as modeling the capacity expansion of the bulk power system, fuel scarcity challenges, the development of microgrids, and the economic viability of transmission strategies. See NREL/PR-7A40-88837 for the English translation of this document.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

USAID Haiti Training Session #4: Resilience and Power Sector Modeling Part II [Slides]

Welcome to Engage! Engage is a capacity expansion modeling tool supported by the National Renewable Energy Laboratory and based on the Calliope open-source capacity expansion model developed by the ETH Zurich University, maintained at the TU Delft University. Engage is an accessible (free, open-access, web-hosted) and flexible web-based energy system planning application for rapid multiple-energy-form energy system scenario exploration. Its cloud-based, collaborator-sharable data model, intuitive interface and visualization capabilities facilitate collaboration and communication among teams, with experts, and among diverse stakeholder groups exploring energy system implications from district to national-scale models. This training series was developed under USAID to empower Haitian stakeholders to explore modeling scenarios in Engage to develop a Haiti Energy Master Plan. This training series includes a general overview of how Engage works along with tailored exercises that target Haiti's specific energy needs, such as modeling the capacity expansion of the bulk power system, fuel scarcity challenges, the development of microgrids, and the economic viability of transmission strategies. See NREL/PR-7A40-89412 for the French translation of this document.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

Seance de formation n4: Modelisation de la resilience et du secteur de l'electricite - Partie I [Slides]

Welcome to Engage! Engage is a capacity expansion modeling tool supported by the National Renewable Energy Laboratory and based on the Calliope open-source capacity expansion model developed by the ETH Zurich University, maintained at the TU Delft University. Engage is an accessible (free, open-access, web-hosted) and flexible web-based energy system planning application for rapid multiple-energy-form energy system scenario exploration. Its cloud-based, collaborator-sharable data model, intuitive interface and visualization capabilities facilitate collaboration and communication among teams, with experts, and among diverse stakeholder groups exploring energy system implications from district to national-scale models. This training series was developed under USAID to empower Haitian stakeholders to explore modeling scenarios in Engage to develop a Haiti Energy Master Plan. This training series includes a general overview of how Engage works along with tailored exercises that target Haiti's specific energy needs, such as modeling the capacity expansion of the bulk power system, fuel scarcity challenges, the development of microgrids, and the economic viability of transmission strategies. See NREL/PR-7A40-88838 for the English translation of this document.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

Seance de formation n4: Modelisation de la resilience et du secteur de l'electricite - Partie II [Slides]

Welcome to Engage! Engage is a capacity expansion modeling tool supported by the National Renewable Energy Laboratory and based on the Calliope open-source capacity expansion model developed by the ETH Zurich University, maintained at the TU Delft University. Engage is an accessible (free, open-access, web-hosted) and flexible web-based energy system planning application for rapid multiple-energy-form energy system scenario exploration. Its cloud-based, collaborator-sharable data model, intuitive interface and visualization capabilities facilitate collaboration and communication among teams, with experts, and among diverse stakeholder groups exploring energy system implications from district to national-scale models. This training series was developed under USAID to empower Haitian stakeholders to explore modeling scenarios in Engage to develop a Haiti Energy Master Plan. This training series includes a general overview of how Engage works along with tailored exercises that target Haiti's specific energy needs, such as modeling the capacity expansion of the bulk power system, fuel scarcity challenges, the development of microgrids, and the economic viability of transmission strategies. See NREL/PR-7A40-89389 for the English translation of this document.

24 POWER TRANSMISSION AND DISTRIBUTION↗