Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hf”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Line shape parameters for HCl and HF in a CO2 atmosphere.

Results of high-resolution (0.1 cm/cm) on several CO2-broadened lines in the fundamentals of HCl35 and HCl37. Line intensities, half-widths, and shapes were determined at room temperature. Half-widths in HCl-CO2 collisions were computed for several temperatures, employing Anderson's (1949) theory. The measured shapes of HCl lines broadened by CO2 are described by a semiempirical super-Lorentzian shape. The curve-of-growth for this line shape is derived in terms of a function similar to the Ladenburgh-Reiche function. Absorption between R(0) and P(1) is affected by the appearance of several pressure-induced Q-branch lines, at the pressures from 1 to 10 atm used in the present study.

Varanasi, P.↗
NASA NTRS1973

Role of Hf and Zr in the hydrogen embrittlement of Ta and Cb alloys

The hydrogen embrittlement of aged T-111 and similar Ta and Cb alloys is characterized and the mechanisms believed responsible for the increased sensitivity of T-111 to low temperature hydrogen embrittlement after aging for 1000 hours or longer near 1040 C are described. A total of eight Ta base alloys and two Cb base alloys were investigated. The effects of pre-age annealing temperature, aging time, temperature and environment, and alloy composition on the susceptibility to hydrogen embrittlement were investigated. The primary method of determining the effects of these variables on the ductility of T-111 was by bend testing at 25 and -196 C. Fractured specimens were examined by the scanning electron microscope, electron microprobe, metallography and X-ray diffration.

Stephens, J. R.↗
NASA NTRS1974

Role of HF and Zr in the hydrogen embrittlement of Ta and Cb alloys

An attempt is made to characterize the hydrogen embrittlement of aged T-111 and similar Ta and Cb alloys and to describe the mechanisms believed responsible for the increased sensitivity of T-111 to low temperature hydrogen embrittlement after aging for 1000 hr or longer near 1040 C. A total of eight Ta-base alloys and two Cb-base alloys were investigated. The effects of pre-age annealing temperature, aging time, temperature and environment, and alloy composition on the susceptibility to hydrogen embrittlement were investigated. The primary method of determining the effects of these variables on the ductility of T-111 was by bend testing at 25 and -196 C. Fractured specimens were examined by the scanning electron microscope, electron microprobe, metallography, and X-ray diffraction.

Stephens, J. R.↗
NASA NTRS1976

The structure of lightning flashes HF-UHF: 12 September 1975, Atlanta, Georgia

Simultaneous measurement of sferics at 3, 30, 139, and 295 MHz were made during thunderstorms. Wideband electronics and an analogue tape recorder continuously recorded the radiation from lightning with about 300 kHz of bandwidth. The data were obtained during the passage of a cold front. Flashing rate, burst rate and the structure of individual flashes were recorded. The record of a typical flash begins with a sudden burst of closely spaced pulses whose temporal structure is typical of the stepped leader, and ends in a large pulse suggestive of a first return stroke. The remainder of the flash consists of a sequence of pulses of varying amplitude separated by quiet periods of the order of milliseconds. The shape of these pulses and the temporal structure suggest that the first few large pulses are return strokes. Other discharges begin with widely spaced discrete pulses and resemble the preceding discharge less the leader and return stroke phase. The radiation exhibits a similar structure, at each of the frequencies monitored.

Levine, D. M.↗
NASA NTRS1977

Studies of the sea using HF radio scatter

Radio signals of decameter wavelength resonantly scattered from waves on the sea surface are used to measure precisely the wavelength, frequency, and direction of travel of those waves. These measurements are not only important in themselves, but are also used to deduce currents, winds, and perhaps wind stress at the sea surface. Techniques for obtaining these measurements, as well as experiments to evaluate these techniques are discussed. Finally, scatter has been used to produce the first high-resolution measurements of the directional distribution of large ocean waves, measurements of ocean surface currents at ranges of 20 km, and of surface winds at ranges of 3000 km.

Teague, C. C.↗
NASA NTRS1976

Zr-Hf fractionation in chemically defined lunar rock groups

Zirconium and hafnium, a geochemically coherent pair of elements, are strongly fractionated in lunar rocks, as evidenced by a wide range of Zr/Hf mass ratios from 12 for the anorthosite 60015,65A to 50 for the KREEP breccia 14321. This may be explained in part by selective reduction of Zr(4+) to Zr(3+) and exclusion of the Zr(3+) from early crystallized Fe-Ti minerals.

Garg, A. N.↗
NASA NTRS1979

Active Antenna for the VLF to HF Observer

A simple and low cost method of fabricating an active antenna preamplifier system covering the range of 10 KHz to 10 MHz for use with tunable communications receivers is described. The same type of system can be used with airborne VLF navigation receivers. By operating a high impedance preamplifier as a wide band device directly at the base of a short vertical antenna, the signal can be driven back to the receiver on a length of coaxial cable. The antenna can be as short as I meter and still give excellent results when the capacity to ground at the antenna is low.

Burhans, R. W.↗
NASA NTRS1979

Low cycle fatigue properties of MAR-M-246 Hf in hydrogen

The transverse, low cycle fatigue properties were determined for directionally solidified and single crystal samples of a cast nickel-base alloy proposed for use in space propulsion systems in pure or partial high pressure hydrogen environments at elevated temperatures. The test temperature was 760 C (1400F) and the pressure of the gaseous hydrogen was 34.5 MPa (5000 psig). Low cycle fatique life was established by strain controlled testing using smooth specimens and a servohydraulic closed-loop test machine modified with a high pressure environmental chamber. Results and conclusions are discussed.

Warren, J. R.↗
NASA NTRS1979

The temporal structure of the HF and VHF radiation produced by intracloud lightning discharges

Measurements of the radio frequency emissions produced by large-amplitude intracloud lightning impulses are presented in correlation with the associated electric radiation field. The RF radiation starts at almost the same time as the field, and the peak RF tends to occur during the initial half cycle of the field pulse. This temporal behavior is in marked contrast to that exhibited by the RF during the return stroke portions of cloud-to-ground flashes.

Krider, E. P.↗
NASA NTRS1981

Development of improved high temperature coatings for IN-792 + HF

The development for t-55 l712 engine of high temperature for integral turbine nozzles with improved thermal fatigue resistance without sacrificing oxidation/corrosion protection is discussed. The program evaluated to coating systems which comprised one baseline plasma spray coating (12% Al-NiCoCrALY), three aluminide coatings including the baseline aluminide (701), two CoNiCrAly (6% Al) + aluminide systems and four NiCoCrY + aluminide coating were evaluated. The two-step coating processes were investigated since it offered the advantage of tailoring the composition as well as properly coating surfaces of an integral or segmented nozzle. Cyclic burner rig thermal fatigue and oxidation/corrosion tests were used to evaluate the candidate coating systems. The plasma sprayed 12% Al-NiCoCrAlY was rated the best coating in thermal fatigue resistance and outperformed all coatings by a factor between 1.4 to 2.5 in cycles to crack initiation. However, this coatings is not applicable to integral or segmented nozzles due to the line of sight limitation of the plasma spray process. The 6% Al-CoNiCrAlY + Mod. 701 aluminide (32 w/o Al) was rated the best coating in oxidation/corrosion resistance and was rated the second best in thermal fatigue resistance.

Profant, D. D.↗
NASA NTRS1982

Radial dependence of HF wave field strength in the BPD column

The results of a recent set of RF frequency measurements of the beam plasma discharge (BPD) performed in order to determine a quantitative value for the field strength in the plasma frequency region of the spectrum are presented. The parallel and perpendicular components of the plasma wave electric fields inside the BPD column have comparable field strengths, on the order of 10 volts/m. The radial dependence of the field strength is very strong, decreasing by as much as 40 dB within one meter from the beam center, with the illumination or discharge column approximately one meter in diameter. The field strength inside the column increases as a function of distance along the beam at least for several meters from the gun aperture. The frequency and amplitude of the plasma wave increases with beam current. A particularly rapid increase in these parameters occurs as the beam current approaches the critical current.

Jost, R. J.↗
NASA NTRS1984

The Lf-Hf evolution of KREEP

The most widely accepted theory for lunar evolution is the cumulate remelting model. According to the model, the outer several hundred kilometers of the Moon were molten early in its history at about 4.4 to 4.5 billion years ago. As this magma ocean cooled minerals began to crystallize and accumulate either at the base or the top of the magma ocean depending upon the density of the mineral. The accumulated minerals at the base were partially remelted at about 3.9 to 3.2 billion years to produce the mare basalts.

Unruh, D. M.↗
NASA NTRS1983

The relationship between strength of turbulence and backscattering radar power at HF and VHF

The formulae relating turbulence and other atmospheric parameters to backscattered power for radar observations are reviewed. Emphasis is on the case of scatter from turbulent irregularities which have scales corresponding to the range of isotropic, inertial range turbulence. The applicability of this assumption is discussed. A formula is introduced for the mesosphere which relates ionospheric electron densities to backscattered power.

Hocking, W. K.↗