SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Filler developed for gaps between insulating tiles on Space Shuttle finds application in industries that use tiles for thermal or environmental protection. Filler consists of tight-fitting ceramic tubes and fibrous alumina. Combination resists high wind loads while providing requisite heat protection. Quartz-thread stitching holds envelope together.
A program to be carried out on transparent liquid-phase miscibility gap materials was developed for the purpose of acquiring additional insight into the separation process occurring in these systems. The transparency feature allows the reaction to be viewed directly through light scattering and holographic methods.
Sedimentation and phase separation is a well known occurrence in monotectic or miscibility gap alloys. Previous investigations indicate that it may be possible to prepare such alloys in a low-gravity space environment but recent experiments indicate that there may be nongravity dependent phase separation processes which can hinder the formation of such alloys. Such phase separation processes are studied using transparent liquid systems and holography. By reconstructing holograms into a commercial-particle-analysis system, real time computer analysis can be performed on emulsions with diameters in the range of 5 micrometers or greater. Thus dynamic effects associated with particle migration and coalescence can be studied. Characterization studies on two selected immiscible systems including an accurate determination of phase diagrams, surface and interfacial tension measurements, surface excess and wetting behavior near critical solution temperatures completed.
In order to develop a better understanding of separation processes in binary miscibility gap metal alloys, model transparent fluid systems were studied. The system selected was diethylene glycol-ethyl salicylate which has convenient working temperatures (288 to 350 K), low toxicity, and is relatively easy to purify. The system is well characterized with respect to its phase diagram, density, surface and interfacial tensions, viscosity and other pertinent physical properties. Studies of migration of the dispersed phase in a thermal gradient were performed using conventional photomicroscopy. Velocities of the droplets of the dispersed phase were measured and compared to calculated rates which included both Stokes and thermal components. A holographic microscopy system was used to study growth, coalescence, and particle motions. Sequential holograms allowed determination of particle size distribution changes with respect to time and temperature. Holographic microscopy is capable of recording particle densities up to 10 to the 7th power particles/cu cm and is able to resolve particles of the order of 2 to 3 microns in diameter throughout the entire volume of the test cell. The reconstructed hologram produces a wavefront that is identical to the original wavefront as it existed when the hologram was made. The reconstructed wavefront is analyzed using a variety of conventional optical methods.
Wind-tunnel tests were made to investigate the control effectiveness of wing trailing-edge flap-type aerodynamic controls for a supercritical wing. The tests determined the effects of spanwise flap control location, two different wing transition grit location patterns, magnitude of angular control deflection, control hinge moments and control hinge gap seals. Results show that the inboard flap position deflections caused interference rearward at the vertical tail, and that all flap positions for deflections in one direction only caused interference at the horizontal tail at a higher than design Mach number. Changes in wing transition grit pattern caused significant changes to static longitudinal characteristics and longitudinal control effectiveness.
Multiple band gap photovoltaic structures convert greater portion of insolation to electricity than present solar cells.
Data are presented which show that the Schottky barrier height for gold on the ternary compound GaAs(1-x)P(x) follows the commonly assumed two-thirds of the band gap relationship. An explanation is given for the reason that previously published data did not exhibit this behavior.
When a semiconductor sample is irradiated by means of an external source, emitting photons or electrons, excess carriers are produced which distribute themselves throughout the sample. One of the parameters which determine the distribution of the carriers is the surface recombination velocity. The present investigation is concerned with the recombination lifetime tau. The predominant mechanism for recombination in wide band-gap semiconductors is described by the Shockley-Read-Hall (SRH) theory. The transport equations are derived for free carriers and the radiation field. The considered theory is applied to a semiinfinite, one-dimensional semiconductor slab irradiated by light of a given frequency. Some numerical considerations based on n-type GaAs are presented. Attention is given to a determination of the radiation transmitted through the surface of the sample.
Measurements made by the NASA-JSC ozone instrument during the ozone intercomparison campaign from Gap, France during June 1981 are reported. Two flights were made on board the large balloon platform with other instruments using different techniques. The NASA-JSC instrument employs UV absorption photometry to obtain in situ results. Concentration and mixing ratio profiles are given for altitudes from 16 km to float altitudes of 32 and 39 km, respectively, for the two flights. A measure of the total column content of ozone was obtained by integrating the NASA-JSC results from 16 km to float altitude and combining them with results from other techniques below 16 km and above float altitudes.
The Nimbus 7 Total Ozone Mapping Spectrometer (TOMS) data over Europe have been processed for 2 days of the ozone sensor intercomparison balloon campaign in June 1981 at Gap, France. The June 19 TOMS map shows an elongated ozone maximum (about 400 D.U) extending in a NW-SE direction across central Europe and an ozone minimum (300 D.U.) in the central Atlantic. This pattern produces a 12 D.U. decrease along the balloon trajectory from the fist ascent to the second descent. On June 26 a much smaller ozone maximum (400 D.U.) is centered in northern France with its main axis running in a SW-NE direction. The total ozone contours tend to lie parallel to the balloon trajectory so that the total ozone during the flight is nearly constant.
The problem considered is the unidirectional growth of alloys close to monotectic composition and within the miscibility gap when the direction of gravity is down the temperature gradient (solidification upwards) or up the temperature gradient (solidification downwards). The systems Al-In and Al-Bi are taken as examples. With solidification upwards it is shown that bulk liquid composition adjusts to that of the monotectic while in the reverse situation, the bulk liquid gradually rises. In the former case it is possible to grow aligned fibrous structures of monotectic composition but in the latter the microstructures are irregular and globular.
The centrifugal instability of the viscous fluid flow between concentric circular cylinders in the small gap limit is considered. The amplitude of the Taylor vortex is allowed to depend on a slow time variable, a slow axial variable, and the polar angle. It is shown that the amplitude of the vortex cannot in general be described by a single amplitude equation. However, if the axial variations are periodic a single amplitude equation can be derived. In the absence of any slow axial variations it is shown that a Taylor vortex remains stable to wavy vortex perturbations. Furthermore, in this situation, stable nonaxisymmetric modes can occur but do not bifurcate from the Taylor vortex state. The stability of these modes is shown to be governed by a modified form of the Eckhaus criterion.
Welding programs which show that parallel gas welding is a reliable process are discussed. When monitoring controls and nondestructive tests are incorporated into the process, parallel gap welding becomes more reliable and cost effective. The panel fabrication techniques and the HAC thermal cycling test indicate reliable product integrity. The design and building of automated tooling and fixturing for welding are discussed.
The sudden eccentricity increases discovered by Wisdom (1982) are reproduced in numerical integrations of the planar ecliptic restricted three-body problem, verifying that this phenomenon is real. Mapping derivations are qualitatively reviewed and the maximum Liapunov characteristic exponent and its importance for determining the character of a trajectory are explained. The results of a number of calculations of this exponent using the differential equations for the unaveraged three-body problem are shown and compared to equivalent calculations using a mapping. In all cases the two approaches agree whether the orbits are chaotic or quasiperiodic. The mappings are used to trace out the chaotic zone near the 3/1 commensurability, both in the planar-ecliptic problem and in the three-dimensional elliptic problem. The outer boundary of the chaotic zone coincides with the boundary of the 3/1 Kirkwood gap in the actual distribution of asteroids within the errors of the asteroid orbital elements.
PAN AIR is a computer program that calculates linear potential flow about arbitrary configurations at both subsonic and supersonic Mach numbers. This paper is a follow-on of another paper entitled 'PAN AIR Modeling Studies', in which several studies were presented that exhibited PAN AIR's versatility for modeling diverse configurations. Results from four modeling studies of interest in modeling realistic aircraft shapes are presented. The topics addressed are (1) half-geometry option in sideslip, (2) network gaps, (3) three-dimensional forebody flows, and (4) trailing-edge representation.
The centrifugal instability of the viscous fluid flow between concentric circular cylinders in the small gap limit is considered. The amplitude of the Taylor vortex is allowed to depend on a slow time variable, a slow axial variable, and the polar angle. It is shown that the amplitude of the vortex cannot in general be described by a single amplitude equation. However, if the axial variations are periodic a single amplitude equation can be derived. In the absence of any slow axial variations it is shown that a Taylor vortex remains stable to wavy vortex perturbations. Furthermore, in this situation, stable nonaxisymmeric modes can occur but do not bifurcate from the Taylor vortex state. The stability of these modes is shown to be governed by a modified form of the Eckhaus criterion. Previously announced in STAR as N84-10501
Repeated surveys of short level lines in the Shumagin Islands, Alaska, reveal coherent tilt signals associated with subduction of the Pacific plate beneath the North American plate in the Shumagin seismic gap. Ten years of steady tilt down toward the trench is interrupted during 1978-1980 by a rapid episode of reverse tilt. The 'normal' tilt represents surface deformation as subduction occurs, with the plate boundary locked to at least 60 km depth. Using all available tilt, sea level, and seismic data, the tilt reversal is interpreted as due to an episodic reverse slip of about 80 cm magnitude on the plate boundary between about 70 km and 20 km depth, downdip from the main seismogenic zone, which remains locked. This event causes an increase of stress on the locked main thrust zone. It is speculated that such events may be a regular process at subduction zones, that great plate boundary earthquakes may be more common during their occurrence, and that their onset may be detectable early enough to give warning of an increase in probability for the occurrence of a great earthquake.
The application of the radiative transfer theory for semiconductors to p-n homojunctions subject to low level injection conditions is discussed. By virtue of the interaction of the radiation field with free carriers across the depletion layer, the saturation current density in Shockley's expression for the diode current is reduced at high doping levels. The reduction, due to self-induced photon generation, is noticeable for n-type material owing to the small electron effective mass in direct band-gap III-V compounds. The effect is insignificant in p-type material. At an equilibrium electron concentration of 2 x 10 to the 18th/cu cm in GaAs, a reduction of the saturation current density by 15 percent is predicted. It is concluded that realistic GaAs p-n junctions possess a finite thickness.