Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fuels Development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Autoignition delay times measurements of linear unsaturated jet fuel compounds inside a shock tube

Autoignition delay times measurements and CO time histories were studied for 2-pentene, a hydrocarbon in aviation fuel and an important species in the development of aviation fuel surrogates. Three mechanisms from the literature were compared against the measured data, and a sensitivity analysis for CO was performed for all mechanisms. Shock tube experiments were performed between 1246 K – 1372 K and 8.8 atm – 9.3 atm at an equivalence ratio of 1, a fuel loading of 0.25% was used and was balanced in oxygen and argon. Discrepancies between the available literature mechanisms exist, the measured data herein is essential for validation of these mechanisms and the reduction of validated mechanisms for coupling into CFD.

09 BIOMASS FUELS↗
DOE OSTI2021

Microstructural Changes and Chemical Analysis of Fission Products in Irradiated Uranium-7 wt.% Molybdenum Metallic Fuel Using Atom Probe Tomography

Understanding the microstructural and phase changes occurring during irradiation and their impact on metallic fuel behavior is integral to research and development of nuclear fuel programs. This paper reports systematic analysis of as-fabricated and irradiated low-enriched U-Mo (uranium-molybdenum metal alloy) fuel using atom probe tomography (APT). This study is carried out on U-7 wt.% Mo fuel particles coated with a ZrN layer contained within an Al matrix during irradiation. The dispersion fuel plates from which the fuel samples were extracted are irradiated at Belgian Nuclear Research Centre (SCK CEN) with burn-up of 52% and 66% in the framework of the SELENIUM (Surface Engineering of Low ENrIched Uranium-Molybdenum) project. The APT studies on U-Mo particles from as-fabricated fuel plates enriched to 19.8% revealed predominantly γ-phase U-Mo, along with a network of the cell boundary decorated with α-U, γ’-U2Mo, and UC precipitates along the grain boundaries. The corresponding APT characterization of irradiated fuel samples showed formation of fission gas bubbles enriched with solid fission products. The intermediate burnup sample showed a uniform distribution of the typical bubble superlattice with a radius of 2 nm arranged in a regular lattice, while the high burnup sample showed a non-uniform distribution of bubbles in grain-refined regions. There was no evidence of remnant α-U, γ’-U2Mo, and UC phases in the irradiated U-7 wt.% Mo samples.

Bachhav, Mukesh↗
DOE OSTI2024

Copper and bismuth-based sorbent characterization in simulated iodine off-gas streams

The effective capture of volatile radioiodine, a fission product present in used nuclear fuel (UNF), is of paramount importance for development of used fuel reprocessing schemes to prevent release of radioiodine during unit operations and to meet regulatory standards for air emissions. A well-studied method for iodine capture in off-gas streams is the use of silver-functionalized zeolite phases (AgZ), which exploit chemisorption of I to Ag. Advances into other Ag-functionalized materials, including aerogels and metal organic frameworks (MOFs), are underway [1]. Additional metals with the capability to chemisorb iodine, including Cu, Bi, and Sn, [1] are being evaluated as alternatives to Ag for potential applicability to iodine management in off-gas systems. The design of novel functionalized sorbents with Cu and Bi, including composites with metal particles embedded in PAN substrates [2] and composites with metal sulfides embedded in PAN [3], is an ongoing area of study for improved iodine capture. Previously reported work on novel PAN-based metal sorbents has provided the synthesis, characterization, and iodine capture efficiency of this new class of sorbent. Specifically, the metal sulfide PAN composites are found to be easy to produce and reproduce, as well as having a high iodine loading potential under static conditions [3]. Due to the favorable testing previously performed with metal sulfide PAN composites, further testing into the performance of these composites under gas streams containing I2(g) in combination with NO2(g) and H2O(g) is needed. Humid streams of NO2(g) may arise from dissolver off-gas streams, when used fuel is dissolved in HNO3(aq) [4]. NO2(g) has been found to reduce AgZ sorption capacity for I because of oxidation of Ag, the chemisorbing agent, to Ag2O [5]. It follows that performance evaluation of novel sorbents under highly oxidizing conditions such as NO2(g) streams is critical. Therefore, the objective of this study is to determine the effect of flowing NO2(g) and H2O(g) streams on iodine sorption capacity and sorbent performance. This work utilizes custom-built gas handling capabilities for sorbent exposure along with solid-state characterization techniques to assess the physical and chemical properties of sorbents before and after exposure.

copper, bismuth, iodine capture, iodine sorbent, p↗
DOE OSTI2024

Development and Evaluation of a Novel Fuel Injector Design Method using Hybrid-Additive Manufacturing (Final Report)

The widespread application of metal additive manufacturing (AM) technologies has enabled exploration of complex design spaces to achieve optimally performing components. Current optimization techniques make use of several advanced methods to provide designs that are superior to existing versions. However, they seldom discuss the manufacturability of the optimal designs. The objective of this project was to develop a design optimization tool that simultaneously optimizes fuel injector hardware and the combustor flow field with optimization functions and constraints that consider both combustor performance and manufacturability using advanced AM methods and post-processing. In this way, the resultant hardware design is inherently imbued with our most advanced knowledge of combustion physics and AM methods from its conception.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mesoscale Modeling of the Effects of Accelerated Burnup on UO2 Microstructural Evolution

Accelerating the nuclear fuel qualification process will rely on some combination of advanced modeling and simulation techniques with accelerated irradiation testing and separate effects experiments to enable the development of new fuel concepts in a shorter time frame. One of the key challenges to successfully leveraging accelerated irradiation tests will be understanding the artifacts that may be introduced with accelerated accumulation of dose and/or burnup. This work presents phase field (MARMOT) simulations of the evolution of representative 2D UO2 microstructures up to 40 MWd/kgU. Simulations were performed under both commercial light water reactor fuel conditions as well as those that would be expected for highly accelerated (~10x) burnup conditions similar to those used in the MiniFuel irradiations in Oak Ridge National Laboratory’s High Flux Isotope Reactor. The phase field model was coupled with a discrete nucleation algorithm to model re- structuring at high burnup. The effect of the different fission rates in both microstructures was investigated at two temperatures: 650?C and 800?C. The lower temperature simulations both showed an onset of restructuring at nearly 60 MWd/kgU. More extensive restructuring was obtained in the MiniFuel microstructure compared with that of the PWR fuel. At 800?C, no restructuring was obtained as a result of the thermally activated diffusion of Xe atoms and U vacancies to fission gas bubbles, which reduces the nucleation driving force. These results highlight the importance of using modeling and simulation tools to inform the environmental conditions during targeted accelerated irradiation tests to extract the most useful fuel performance data.

accelerated fuel qualification, Phase Field, Restr↗
DOE OSTI2020

Development and demonstration of a methodology to evaluate high burnup fuel susceptibility to pulverization under a loss of coolant transient

For economic reasons, the US nuclear industry is renewing efforts to build a technical basis to extend rod average burnup limits above the current regulatory burnup limit of 62 GWd/MTU. The primary driver is to increase pressurized water reactor cycle lengths to 24 months, reducing the number of fresh fuel assemblies and core design constraints, thereby making core energy utilization more efficient. However, fuel pellet fragmentation and pulverization, termed high burnup fuel fragmentation (HBFF), has been observed in the high burnup (>90 GWd/MTU) Halden loss-of-coolant-accident (LOCA) integral test series. The issue gained attention when fuel fragmentation and pulverization were also observed closer to the current US regulatory limit during the US Nuclear Regulatory Commission (NRC) sponsored out-of-core integral test at Studsvik Nuclear in early 2011. This led to NRC concerns with potential changes to fuel and core designs relative to fuel pellet pulverization. In a letter to the NRC Commissioners, the staff specifically identified a need to “…define the boundary of safe operation for key fuel design and operating parameters,” stating that “the staff is challenged to evaluate the acceptability of future fuel design advancements and fuel utilization changes.” As such, it can be concluded that HBFF and potential dispersal into the reactor coolant system introduces additional complications in light-water reactor (LWR) fuel safety evaluations. However, it is not clear how much fuel will be susceptible to HBFF; nor has there been a methodology developed to evaluate fuel susceptibility to HBFF. To that end, this paper proposes an analysis methodology to assess fuel susceptibility to HBFF during LOCA scenarios. The work presented here uses the BISON fuel performance code to evaluate a representative pressurized water reactor fuel rod exposed to a rod average burnup of 75 GWd/MTU. Sensitivity studies investigated the impact of the peak cladding temperature, transient fission gas released, and pre-transient fission gas release on cladding ballooning and burst timing. Subsequently, a methodology to assess fuel susceptibility to HBFF will be developed based on experimental data published in the open literature. The methodology will then be demonstrated by calculating the mass of fuel susceptibility to HBFF. The BISON results conclude that increasing peak cladding temperature drastically decreased time to failure, and decreased balloon size both of which have been confirmed experimentally. Additionally, the effect of pre-transient and transient fission gas release affected cladding balloon size and burst timing. Finally, fuel susceptibility to HBFF significantly decreased as a function of peak cladding temperature.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Thermodynamic modeling of hydrogen fueling process from high-pressure storage tank to vehicle tank

This study develops a hydrogen fueling station (HFS) thermodynamic model that simulates the actual fueling process in which hydrogen is supplied from a high-pressure (HP) storage tank into a fuel cell electric vehicle (FCEV) tank. To make the model as accurate as possible, we use the same components and specifications as in actual HFSs, such as a pressure control valve, a pre-cooling system, and an FCEV tank. After the components and their specifications are set, pressure and temperature profiles are set as the HP tank supply conditions. Based on the pressure and temperature profiles, the model solves for the temperature, pressure, and mass flow rate of hydrogen at each downstream position, including the inside of the vehicle tank. The values predicted by the model are compared with experimental data, and we show that the developed model makes it possible to accurately simulate those values at any position during the fueling process.

08 HYDROGEN↗
DOE OSTI2025

SEM Milestone Report for MARMOT Validation Project

MARMOT is a meso-scale fuel code under development by NEAMS designed to predict the microstructure evolution of fuel materials to determine updated thermal and mechanical property models. These updated models can be used by engineering scale codes such as BISON. To support its development and validation the MARMOT Validation Project (MVP) was initiated and consists of extensive microstructure and thermal characterization of U-10Zr fuel material before and at discreet levels of irradiation. This report summarizes the SEM and EDS characterization of the lowest burnup samples (1.5% FIMA) and how they compare to pre-irradiation SEM and EDS.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Stationary Direct Methanol Fuel Cells Using Pure Methanol

This project developed stationary direct methanol fuel cells (DMFCs) using pure methanol as the fuel, integrating complementary institutional expertise on platinum group metals free (PGM-free) cathode catalyst (UB), supported anode catalysts (KSU), electrode fabrication, characterization, and optimization (CMU), and multi-phase mass transfer (KU). The proposed cost-effective prototype will deliver reliable and durable performance using a methanol-tolerant PGM-free cathode and a high-performance anode with low PtRu loading. At the end of the project, the research team is expected to deliver a single cell (50 cm 2 ) with ≤3 mg PGM /cm 2 that achieves 300 mW/cm 2 using pure methanol.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Contribution of IAEA coordinated research projects to light water reactors advanced technology fuel testing and simulation

The Fukushima-Daiichi accident in 2011 highlighted the pressing need for enhanced design and safety analysis of nuclear fuels, especially under accident conditions in nuclear power plants (NPPs). To address this need, the international nuclear fuel community has developed several concepts of Accident Tolerant and Advanced Technology Fuels (ATFs) for light water reactors. The International Atomic Energy Agency (IAEA), at the request of its Member States, has initiated a series of three Coordinated Research Projects (CRPs) to aid in the development and testing of these ATFs. Further, these projects, known as FUMAC, ACTOF, and ATF-TS, focus on the experimentation and simulation of ATFs under various accident conditions, including design basis accidents and design extension conditions. This paper provides a comprehensive overview of the main activities, as well as the achieved or anticipated results of these three CRPs. The insights and advancements gained from these projects will enable IAEA Member States to further refine nuclear fission technology, thereby contributing to efforts aimed at mitigating climate change.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

The Challenge Ahead: A Critical Perspective on Meeting U.S. Growth Targets for Sustainable Aviation Fuel

With demand for jet fuel expected to more than double by 2050 and triple by 2070, continued and accelerated efforts to decarbonize the global aviation sector are needed to curtail rising emissions and avert the worst outcomes of climate change. In response to this call-to-action, the United States has unveiled the Sustainable Aviation Fuel (SAF) Grand Challenge, which seeks to expedite the development of alternative fuel pathways that offer a minimum of a 50% reduction in life cycle greenhouse gas emissions compared to conventional jet fuel. However, there is growing concern on whether sufficient biomass will be readily available to satisfy the projected sharp rise in demand for SAF. Carbon dioxide point-source emissions combined with rising supply from direct air capture efforts have the potential to complement and offset any supply gaps for biomass-derived SAF and other use cases. Independent of the chosen feedstock and conversion technology, numerous challenges persist across SAF production in seeking to drive down fuel cost and carbon intensity. To hit the 2030 target of 3 billion gal/yr, this means about a 100% compound annual growth rate in volumetric SAF production (about 130 times scale-up) will need to be realized. To achieve the stretch goal of 35 billion gallons of SAF per year by 2050, volumetric production must increase by a factor of 12 from the 3-billion-gal/year 2030 target of SAF Grand Challenge. The comparatively longer runway for 2050 combined with significant production volume growth suggests a more inclusive "all-hands-on-deck"-style approach will likely play a role. A key component in success lies in the coordinated research, development, demonstration, and deployment efforts by multiple federal agencies and industry partnerships.

09 BIOMASS FUELS↗
DOE OSTI2025

Comparison of a Full-Scale and a 1:10 Scale Low-Speed Two-Stroke Marine Engine Using Computational Fluid Dynamics

International marine shipping is a growing component of international trade; a vast majority of all the world’s goods are being transported on large ocean-going vessels. The International Maritime Organization (IMO) introduced the Energy Efficiency Design Index in 2013, a regulatory framework of associated metrics for reducing emissions of CO 2 per tonne-mile from shipping by approximately 10% each decade. Therefore, decarbonizing the maritime sector requires the development of new fuel sources. Because of the extremely large physical size of the internal combustion engines present in shipping vessels, experimental iterative development of the engine and fuel system is cost-prohibitive. Thus, the ability to perform combustion system development in a scaled platform that can be more easily operated and modeled computationally is of interest. To that end, scaling relationships are needed to translate the results from a smaller engine to a larger counterpart. Scaling studies to date have been restricted to low scaling ratios, four-stroke light-duty engines, and under-resolved computational fluid dynamic simulations that likely do not accurately capture the physics of scaling. In this work, computational models of a 1:10 scale and a full-scale two-stroke crosshead low-speed marine engine were created and validated against experiments obtained in a real 1:10 scale engine installed at Oak Ridge National Laboratory. Further, due to the large size of the full-scale engine, the model required large high-performance computing resources to be evaluated. The availability of high-performance computing resources at the Department of Energy’s Leadership Computing Facilities is an enabler of the current work. The results of the small- and large-scale engine simulations were compared to analyze the effectiveness of the appropriate scaling laws under these extreme scaling ratio conditions.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Mobility assessment of the BCC and carbide phases in the C-Nb, C-U and Nb-U systems

Uranium carbides with refractory metal additions are considered for Gen IV nuclear reactors and nuclear thermal propulsion as fuels for their high-temperature and corrosion resistant properties. Understanding kinetic effects that dictate microstructural evolution during fabrication and operating conditions is essential to advance technological development of these fuels. This work presents the development of an atomic mobility database for C-Nb-U systems based off available experimental data supported with ab-initio methods. The mobility assessments and uncertainty quantification (using Markov chain Monte Carlo) were conducted in the Kawin software. Carbon diffusion is considered dominant, as metal diffusion is much slower, with niobium diffusion being even slower and rate limiting than uranium metal. We provide a comprehensive and self-consistent thermo-kinetic database that is validated by diffusion couple simulations through Kawin. In conclusion, this enables prediction of microstructural and phase evolution critical for the development and lifetime assessment of next generation nuclear fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Initiating a Roadmap for Solar Fuels R&D: Imagining Beyond Thermochemical Cycles

Sandia National Laboratories in collaboration with the National Renewable Energy Laboratory outline a framework for developing a solar fuels roadmap based on novel concepts for hybridizing gas-splitting thermochemical cycle s with high-temperature electro chemical steps. We call this concept SoHyTEC, a Solar Hybrid Thermochemical-Electrochemical Cycle. The strategy focuses on transforming purely thermochemical cycles that split water (H 2 O) and carbon dioxide (CO 2 ) to produce hydrogen (H 2 ) and carbon monoxide (CO) , respectively, the fundamental chemical building blocks for diverse fuels and chemicals , by substituting thermochemical reactions with high-temperature electrochemical steps. By invoking high-temperature electrochemistry, the energy required to complete the gas-splitting cycle is divided into a thermal component (process temperature) and an electrical component (applied voltage). These components, sourced from solar energy, are independently variable knobs to maximize overall process efficiency. Furthermore, a small applied voltage can reduce cycle process temperature by hundreds of degrees , opening the door to cost-effective solar concentrators and practical receiver/reactor de signs. Using the SoHyTEC concept as a backdrop, we outline a framework that advocates developing methods for automating information gathering, critically evaluating thermochemical cycles for adapting into SoHyTEC, establishing requirements based on thermodynamic analysis, and developing a model-based approach to benchmarking a SoHyTEC system against a baseline concentrating solar thermal integrated electrolysis plant. We feel these framework elements are a necessary precursor to creating a robust and adaptive technology development roadmap for producing solar fuels using SoHyTEC. In one example, we introduce high-temperature electrochemistry as a method to manipulate a fully stoichiometric two-step metal oxide cycle that circumvents costly separation processes and ultra-high cycle temperatures. We also identify and group water-splitting chemistries that are conceptually amenable to hybridization.

14 SOLAR ENERGY↗
DOE OSTI2021

Heavy-Duty Low-Temperature and Diesel Combustion & Heavy-Duty Combustion Modeling (FY 2018 Annual Progress Report)

Regulatory drivers and market demands for lower pollutant emissions, lower carbon dioxide emissions, and lower fuel consumption motivate the development of clean and fuel-efficient engine operating strategies. Most current production engines use a combination of both in-cylinder and exhaust emission control strategies to achieve these goals. The emissions and efficiency performance of in-cylinder strategies depend strongly on flow and mixing processes associated with fuel injection. Both heavy- and light-duty engine/vehicle manufacturers use multiple-injection strategies to reduce noise, emissions, and fuel consumption. For both conventional and low-temperature diesel combustion, the state of knowledge and modeling tools for multiple injections are far less advanced than for single-injection strategies. Engine efficiency is limited to some degree by tradeoffs that must be accepted to meet particulate matter (including soot) emissions limits. Recent work on this project has filled some knowledge gaps on soot oxidation with multiple injections, and the current work for Fiscal Year (FY) 2018 addresses knowledge gaps on soot formation for multiple injections. While total in-cylinder soot is readily measured, discerning formation from oxidation is difficult. The FY 2018 experiments are designed to create in-cylinder conditions at the threshold of soot formation, where processes that affect soot formation can be more readily discerned. Soot formation pathways under such conditions are fraught with uncertainties, and soot models significantly overpredict polyaromatic hydrocarbon (PAH) and soot, so experimental data at these conditions will provide much needed data for improvements to PAH and soot models.

02 PETROLEUM↗
DOE OSTI2020

Rapid Assessment of Autoignition Propensity in Novel Fuels and Blends

We developed a computational strategy to correlate bulk combustion metrics of novel fuels and blends in the low-temperature autoignition regime with measurements of key combustion intermediates in a small-volume, dilute, high-pressure reactor. We used neural net analysis of a large simulation dataset to obtain an approximate correlation and proposed experimental and computational steps needed to refine such a predictive correlation. We also designed and constructed a high-pressure laboratory apparatus to conduct the proposed measurements and demonstrated its performance on three canonical fuels: n-heptane, i-octane, and dimethyl ether.

10 SYNTHETIC FUELS↗
DOE OSTI2024

The quest for safer nuclear fuels

Here, to increase the safety and performance of nuclear reactors, researchers are working on developing ‘accident tolerant’ fuels. Ideally, these fuel pellets will be less susceptible to swelling and be more resistant to extreme heat. This led chemists to develop uranium dioxide (UO 2 ) doped with divalent elements, E 2+ . These dopants can introduce vacancies into the lattice that lead to larger grain sizes, which create longer pathways for fission gasses to migrate out of the grains. In undoped fuel, fission gas build-up at grain boundaries causes the fuel pellet to swell. Therefore, having larger grains that slow fission gas migration into grain boundaries is highly desired. Divalent Cr 2+ ions are a commonly explored dopant for UO 2 fuels. These materials have larger grain sizes while maintaining the dissolution kinetics of undoped UO 2 , making their long-term storage and disposal paths similarly safe. Atomistic models have suggested that Mn 2+ is a conceivable alternative doping material, with the potential to increase the sizes of grains even more than Cr 2+ dopants. As such, experimental studies are required to understand the physical chemistry and reactivity of these potential fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Mechanical Properties of Irradiated U-10wt%Mo Alloy Degraded by Porosity Development

A plate-type nuclear fuel consisting of a solid monolithic foil of U-10wt%Mo is under development for use in the United States’ high performance research reactors. In support of developing this fuel, the fuel has been fabricated for the first time by a commercial fuel vendor and subsequently irradiated in a test reactor. This provides an opportunity to evaluate post-irradiation mechanical properties of commercially fabricated fuel. Four-point bend testing was conducted on the irradiated U-10Mo fuel and the data produced includes bending strength and Young’s modulus. Although the material behaves in a brittle manner due to the developed porosity, a general trend of strength and modulus reduction are found as fission density increases. The data produced is evaluated using both Weibull statistics and a modulus degradation model with recommendations provided.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗