Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fluorescence spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Low-pressure methanol synthesis from CO 2 over metal-promoted Ni-Ga intermetallic catalysts

Ni-Ga and M-Ni-Ga (M = Au, Co, Cu) catalysts were evaluated for methanol synthesis from CO 2 at 10 bar and 200-270°C. The following trend in turnover frequency (TOF) for CO 2 hydrogenation was observed: AuNiGa > CuNiGa > NiGa > CoNiGa, where TOF increased with decreasing catalyst affinity for CO. The presence of a third metal was found to influence both the formation of the Ni-Ga intermetallic phase as well as the number of available sites for CO chemisorption. Phase formation, catalyst composition and stability were evaluated using therm ogravimetric analysis (TGA), X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning transmission electron microscopy and energy dispersive X-ray spectroscopy (STEM-EDX). Au-Ni-Ga, which showed a nearly 4-fold improvement in TOF at 263°C and 10 bar compared to Ni-Ga, consisted of Ni 3 Ga particles decorated with Au, as evidenced by post catalysis characterization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Aerosol iron speciation and seasonal variation of iron oxidation state over the western Antarctic Peninsula

The iron (Fe) speciation and oxidation state have been considered critical factors affecting Fe solubility in the atmosphere and bioavailability in the surface ocean. In this study, elemental composition and Fe speciation in aerosol samples collected at the Palmer Station in the West Antarctic Peninsula were determined using synchrotron-based X-ray fluorescence (XRF) and X-ray Absorption Near-Edge Structure (XANES) spectroscopy. The elemental composition of coarse-mode (>1 mu m) Fe-containing particles suggests that the region's crustal emission is the primary source of aerosol Fe. The Fe minerals in these aerosol particles were predominantly hematite and biotite, but minor fractions of pyrite and ilmenite were observed as well. The Fe oxidation state showed an evident seasonal variation. Further, the Fe(II) content accounted for 71% of the total Fe in the austral summer, while this fraction dropped to 60% in the austral winter. Multivariate linear models involving meteorological parameters suggested that the wind speed, relative humidity, and solar irradiance were the factors that significantly controlled the percentage of Fe(II) in the austral summer. On the contrary, no relationship was found between these factors and the Fe(II) percentage in the austral winter, suggesting that atmospheric photoreduction and regional dust emission were limited. Moreover, the snow depth was significantly (p < 0.05) correlated with the aerosol Fe concentration, confirming the limiting effect of snow/ice cover on the regional dust emission. Given that the Antarctic Peninsula has experienced rapid warming during recent decades, the ice-free areas in the Antarctic Peninsula may act as potential dust sources.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Directing Energy Transfer in Halide Perovskite–Chromophore Hybrid Assemblies

Directing the flow of energy and the nature of the excited states that are produced in nanocrystal–chromophore hybrid assemblies is crucial for realizing their photocatalytic and optoelectronic applications. Using a combination of steady-state and time-resolved absorption and photoluminescence (PL) experiments, we have probed the excited-state interactions in the CsPbBr 3 –Rhodamine B (RhB) hybrid assembly. PL studies reveal quenching of the CsPbBr 3 emission with a concomitant enhancement of the fluorescence of RhB, indicating a singlet-energy-transfer mechanism. Transient absorption spectroscopy shows that this energy transfer occurs on the ~200 ps time scale. To understand whether the energy transfer occurs through a Förster or Dexter mechanism, we leveraged facile halide-exchange reactions to tune the optical properties of the donor CsPbBr 3 by alloying with chloride. This allowed us to tune the spectral overlap between the donor CsPb(Br 1–x Cl x ) 3 emission and acceptor RhB absorption. For CsPbBr 3 -RhB, the rate constant for energy transfer (k ET ) agrees well with Förster theory, whereas alloying with chloride to produce chloride-rich CsPb(Br 1–x Cl x ) 3 favors a Dexter mechanism. These results highlight the importance of optimizing both the donor and acceptor properties to design light-harvesting assemblies that employ energy transfer. Furthermore, the ease of tuning optical properties through halide exchange of the nanocrystal donor provides a unique platform for studying and tailoring excited-state interactions in perovskite–chromophore assemblies.

14 SOLAR ENERGY↗
DOE OSTI2025

Clear as mud redefined: Tunable transparent mineral scaffolds for visualizing microbial processes below ground

Microbes inhabiting complex porous microenvironments in sediments and aquifers catalyze reactions that are critical to global biogeochemical cycles and ecosystem health. However, the opacity and complexity of porous sediment and rock matrices have considerably hindered the study of microbial processes occurring within these habitats. Here, we generated microbially compatible, optically transparent mineral scaffolds to visualize and investigate microbial colonization and activities occurring in these environments, in laboratory settings and in situ. Using inexpensive synthetic cryolite mineral, we produced optically transparent scaffolds mimicking the complex 3D structure of sediments and rocks by adapting a suspension-based, freeze-casting technique commonly used in materials science. Fine-tuning of parameters, such as freezing rate and choice of solvent, provided full control of pore size and architecture. The combined effects of scaffold porosity and structure on the movement of microbe-sized particles, tested using velocity tracking of fluorescent beads, showed diverse yet reproducible behaviors. The scaffolds we produced are compatible with epifluorescence microscopy, allowing the fluorescence-based identification of colonizing microbes by DNA-based staining and fluorescence in situ hybridization (FISH) to depths of 100 µm. Additionally, Raman spectroscopy analysis indicates minimal background signal in regions used for measuring deuterium and 13 C enrichment in microorganisms, highlighting the potential to directly couple D 2 O or 13 C stable isotope probing and Raman-FISH for quantifying microbial activity at the single-cell level. To demonstrate the relevance of cryolite scaffolds for environmental field studies, we visualized their colonization by diverse microorganisms within rhizosphere sediments of a coastal seagrass plant using epifluorescence microscopy. The tool presented here enables highly resolved, spatially explicit, and multimodal investigations into the distribution, activities, and interactions of underground microbes typically obscured within opaque geological materials until now.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Uptake and speciation of zinc in edible plants grown in smelter contaminated soils

Heavy metal accumulation in edible plants grown in contaminated soils poses a major environmental risk to humans and grazing animals. This study focused on the concentration and speciation of Zn in different edible plants grown in soils contaminated with smelter wastes (Spelter, WV, USA) containing high levels of the metals Zn, Cu, Pb, Cd. Their accumulation was examined in different parts (roots, stem, and leaves) of plants and as a function of growth stage (dry seed, sprouting seed, cotyledon, and leaves) in the root vegetables radish, the leafy vegetable spinach and the legume clover. Although the accumulation of metals varied significantly with plant species, the average metal concentrations were [Zn] > [Pb] > [Cu] > [Cd]. Metal uptake studies were complemented with bulk and micro X-ray absorption spectroscopy (XAS) at Zn K-edge and micro X-ray fluorescence (μXRF) measurements to evaluate the speciation and distribution of Zn in these plant species. Dynamic interplay between the histidine and malate complexation of Zn was observed in all plant species. XRF mapping of spinach leaves at micron spatial resolution demonstrated the accumulation of Zn in vacuoles and leaf tips. Radish root showed accumulation of Zn in root hairs, likely as ZnS nanoparticles. At locations of high Zn concentration in spinach leaves, μXANES suggests Zn complexation with histidine, as opposed to malate in the bulk leaf. These findings shed new light on the dynamic nature of Zn speciation in plants.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Convenient Confinement: Interplay of Solution Conditions and Graphene Oxide Film Structure on Rare Earth Separations

Graphene oxide (GO) membranes are excellent candidates for a range of separation applications, including rare earth segregation and radionuclide decontamination. Understanding nanoscale water and ion behavior near interfacial GO is critical for groundbreaking membrane advances, including improved selectivity and permeability. Here, we experimentally examine the impact of solution conditions on water and lanthanide interactions with interfacial GO films and connect these results to GO membrane performance. The investigation of the confined films at the air–water interface with a combination of surface-specific spectroscopy and X-ray scattering techniques allows us to understand water and ion behaviors separately. Sum frequency generation spectroscopy reveals a dramatic change in interfacial water organization because of graphene oxide film deprotonation. Interfacial X-ray fluorescence measurements show a 17× increase in adsorbed lanthanide to the GO film from subphase pH 3 to pH 9. Liquid surface X-ray reflectivity data show an additional 2.7 $e^–$ per Å 2 for GO films at pH 9 versus pH 3 as well. These results are connected to GO membrane performance, which show increased selectivity and decreased flux for membranes filtering pH 9 solutions. We posit insoluble lanthanide hydroxides form at higher pHs. Taken together, these results highlight the importance of interfacial experiments on model GO systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Rapid Accumulation of Soil Inorganics on Plastics: Implications for Plastic Degradation and Contaminant Fate

As plastics degrade in the environment, chemical oxidation of the plastic surface enables inorganics to adsorb and form inorganic coatings, likely through a combination of adsorption of minerals and in situ mineral formation. The presence of inorganic coatings on aged plastics has negative implications for plastics fate, hindering our ability to recycle weathered plastics and increasing the potential for plastics to adsorb contaminants. Here, inorganic coatings formed on terrestrially weathered polyethylene were characterized using synchrotron spectroscopy and microscopy techniques across spatial scales including optical microscopy, nano-X-ray-fluorescence mapping (nano-XRF), nano-X-ray absorption near edge structure (nano-XANES), and high-energy resolution fluorescence detected-XANES (HERFD-XANES). Results indicate a heterogeneous elemental distribution and speciation which includes inorganics common to soil terrestrial environments including iron oxides and oxyhydroxides, aluminosilicates, and carbonates.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Impact of Charge Voltage on Factors Influencing Capacity Fade in Layered NMC622: Multimodal X-ray and Electrochemical Characterization

Ni-rich NMC is an attractive Li-ion battery cathode due to its combination of energy density, thermal stability, and reversibility. While higher delivered energy density can be achieved with a more positive charge voltage limit, this approach compromises sustained reversibility. Improved understanding of the local and bulk structural transformations as a function of charge voltage, and their associated impacts on capacity fade are critically needed. Through simultaneous operando synchrotron X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS) of cells cycled at 3–4.3 or 3–4.7 V, this study presents an in-depth investigation into the effects of voltage window on local coordination, bulk structure, and oxidation state. These measurements are complemented by ex situ X-ray fluorescence (XRF) mapping and scanning electrochemical microscopy mapping (SECM) of the negative electrode, X-ray photoelectron spectroscopy (XPS) of the positive electrode, and cell level electrochemical impedance spectroscopy (EIS). Initially, cycling between 3 and 4.7 V leads to greater delivered capacity due to greater lithium extraction, accompanied by increased structural distortion, moderately higher Ni oxidation, and substantially higher Co oxidation. Continued cycling at this high voltage results in suppressed Ni and Co redox, greater structural distortion, increased levels of transition metal dissolution, higher cell impedance, and 3× greater capacity fade.

capacity fading mechanisms↗
DOE OSTI2021

Single Molecule Spectroscopy Studies of Acid–Base Chemical Gradients Using Nile Red as a Probe of Local Surface Acidity

Single molecule spectroscopy studies of local acidity along bifunctional acid-base gradients are reported. Gradients are prepared by directional vapor phase diffusion and subsequent reaction of 3-aminopropyl-trimethoxysilane with a uniform silica film. Gradient formation is confirmed by spectroscopic ellipsometry and by static water contact angle measurements. X-ray photoelectron spectroscopy is used to characterize the nitrogen content and degree of nitrogen protonation along the gradient. Nile Red is employed as the probe dye in single molecule spectroscopy studies of these gradients. While Nile Red is well-known for its solvent sensitivity, it is used here, for the first time, to sense the acid/base properties of the film in two-color wide-field fluorescence imaging experiments. The data reveal broad bimodal distributions of Nile Red emission spectra that vary along the gradient direction. The single-molecule results are consistent with solution-phase ensemble acid/base studies of the dye. The former reveal a gradual transition from a surface dominated by basic aminosilane sites at the high-amine end of the gradient to one dominated by acidic silanol sites at the low-amine end. The sub-diffraction-limited spatial resolution afforded by superlocalization of the single molecules reveals spatial correlations in the acid/base properties of the gradient over ~ 200 nm distances. Furthermore, these studies provide data relevant to the use of aminosilane-modified silica in bifunctional, cooperative chemical catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Effect of glutathione-coated Mn-doped ZnS quantum dots on nutrient delivery in basil ( Ocimum basilicum ) plants

Ensuring efficient nutrient delivery while minimizing environmental impacts remains a significant challenge for modern agriculture. Nanotechnology-based fertilizers offer promising strategies to improve nutrient uptake and bioavailability in plants. This research aims to evaluate the use of Glutathione-coated Manganese-doped Zinc Sulfide quantum dots (GSH-ZnS-Mn QDs) as a potential nano fertilizer for basil (Ocimum basilicum). QDs' physicochemical properties were characterized using UV–Vis spectroscopy, photoluminescence, FTIR, and energy-dispersive X-ray spectroscopy, confirming successful Mn doping and glutathione surface functionalization. Basil plants were exposed to different concentrations of GSH-ZnS-Mn QDs under soil and hydroponic conditions. Plant growth parameters, oxidative stress responses, photosynthetic pigments, and macro- and micronutrient uptake were assessed using biochemical assays and inductively coupled plasma optical emission spectrometry (ICP-OES). Elemental uptake, spatial distribution, and zinc speciation were further investigated using synchrotron-based micro-X-ray fluorescence (μ-XRF) imaging and X-ray absorption near-edge structure (XANES) spectroscopy. Results show that exposure to GSH-ZnS-Mn QDs resulted in a concentration-dependent increase in leaf and stem biomass, accompanied by enhanced Zn accumulation in plant tissues. Catalase activity decreased across all tested concentrations, suggesting a shift toward glutathione-dependent antioxidant pathways rather than oxidative damage. Chlorophyll levels exhibited moderate reductions at higher concentrations. The higher increase in macronutrient (K, Ca, and Mg) uptake was reported in plants exposed to 200 ppm of QDs. μ-XRF imaging indicated a selective accumulation of Zn in roots and stems, with partial translocation to leaves. XANES analyses revealed that Zn from QDs was mainly converted into organic Zn species, such as Zn-phytate, Zn-acetate, and Zn-cysteine, indicating transformation and complexation within the plant. The findings demonstrate that a glutathione coating on GSH-ZnS-Mn QDs improves biocompatibility and nutrient delivery efficiency. These results highlight the relevance of surface functionalization in regulating nanoparticle fate, transformation, and nutrient bioavailability, supporting the potential application of GSH–ZnS–Mn QDs as modern nano fertilizers.

Basil↗
DOE OSTI2021

Role of karyopherin nuclear transport receptors in nuclear transport by nuclear trafficking peptide

Nuclear trafficking peptide (NTP), a cell-penetrating peptide (CPP) composed of 10 amino acids (aa) (RIFIHFRIGC), has potent nuclear trafficking activity. Recently, we established a protein-based cell engineering system by using NTP, but it remained elusive how NTP functions as a CPP with nuclear orientation. In the present study, we identified importin subunit β1 (IMB1) and transportin 1 (TNPO1) as cellular proteins underlying the activity of NTP. These karyopherin nuclear transport receptors were identified as candidate molecules by liquid chromatography/mass spectrometry analysis, and downregulation of each protein by small interfering RNA significantly reduced NTP activity (P < 0.01). Biochemical analyses revealed that NTP bound directly to both molecules, and the forced expression of an IMB1 fragment (296–516 aa) or TNPO1 fragment (1–297 aa), which both contain binding sites to NTP, reduced nuclear NTP-green fluorescent protein (GFP) levels when it was added to cell culture medium. NTP is derived from viral protein R (Vpr) of human immunodeficiency virus-1, and Vpr enters the nucleus and exerts pleiotropic functions. Notably, Vpr bound directly to IMB1 and TNPO1, and its function was significantly impaired by the forced expression of the 296–516-aa fragment of IMB1 and 1–297-aa fragment of TNPO1. Interestingly, NTP completely blocked the physical association of Vpr with IMB1 and TNPO1. Although the nuclear localization mechanism of Vpr remains unknown, our data suggest that NTP functions as a novel nuclear localization signal of Vpr.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Hard X-ray Fluorescence measurements with TESs at the Advanced Photon Source

Transition Edge Sensor (TES) spectrometers for hard X-ray beamline science will enable improved X-ray emission and absorption spectroscopy in the information-rich 2 to 20keV energy range. We are building a TES-based instrument for time Advanced Photon Source (APS) synchrotron, to be made available to beamline users. 24-pixel prototype arrays have recently been fabricated and tested. the first, spectroscopy measurements using these arrays are promising, with a best single-pixel energy resolution of 11.2 eV and saturation energy > 20 keV. We present a series of recent X-ray Fluorescence measurements involving transition metal elements and multi-element samples with closely spaced emission lines, in particular a Cu-Ni-Co thin film and a foil of Cu and Hf, The TES-measured spectra are directly compared to spectra measured with silicon drift detectors at an APS beamline, demonstrating the improved X-ray science made possible by TES spectrometers.

Guruswamy, Tejas↗
DOE OSTI2026

Mechanistic transition of stainless steel 304L corrosion in MgCl 2 phase change material under thermal cycling

Magnesium chloride (MgCl 2 )-based molten salt phase change materials (PCMs) are promising candidates for thermal energy storage (TES) owing to their advantageous thermophysical properties, however, their high corrosivity in the molten state limits material compatibility. In this study, the corrosion behavior of 304?L stainless steel (SS304L) exposed to MgCl2 PCM was investigated as a function of thermal cycling (up to 9000 cycles) relevant to PCM-based TES systems. Microstructural changes and elemental redistribution at the alloy-salt interface under thermal cycling conditions were characterized using synchrotron-based X-ray fluorescence (XRF) and scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDS). Results show that corrosion is governed by selective Cr-dissolution and elemental diffusion near the interface and grain boundaries. A clear transition in the dominant corrosion mechanism is observed with increasing thermal cycles. Surface corrosion is the dominant mechanism up to 1000 cycles, whereas intergranular corrosion becomes the primary degradation mode beyond 2000 cycles. These mechanistic changes are interpreted in terms of evolving interfacial chemistry, microstructure and the diffusion-driven redistribution of alloying elements.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High-throughput ion irradiation of additively manufactured compositionally complex alloys

Several advanced nuclear reactor designs promise efficiency and safety improvements over the current reactor fleet but are limited by the current set of ASME code-qualified materials. Novel alloys including high-entropy alloys (HEAs), and more broadly compositionally complex alloys (CCAs), have shown promising irradiation-tolerance. However, the vast range of alloy compositions adds to an already time-consuming alloy development process. In this study, to accelerate the development of novel alloys for nuclear applications, a high-throughput (HTP) methodology has been employed. Additive manufacturing has been used to produce a compositional array of unary, binary, ternary, and quaternary alloys, including several CCAs, which span the Cr-Fe-Mn-Ni composition space. Additionally, the compositional array was homogenized at 1000°C for 24 hours and each sample was irradiated using 4-MeV Ni2+ ions at room temperature to a peak damage of 50 dpa, as estimated using SRIM, at the University of Wisconsin Ion Beam Laboratory. A custom XY stage was built to accommodate the large compositional array and half of each sample was masked during irradiation enabling both the irradiated and unirradiated properties of each alloy to be characterized side-by-side. Each alloy was characterized using X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and nanoindentation. CALPHAD simulations spanning the entire Cr-Fe-Mn-Ni composition space at 1000°C were performed to compare predicted equilibrium phases with phases identified experimentally from the unirradiated regions of each alloy. Nanoindentation measurements indicate radiation-induced hardening ranging from ~1-1.5 GPa in each of Cr-Fe-Mn-Ni CCAs, which is relatively insensitive to modest changes in alloy composition and comparable to hardening observed in neutron irradiated Cr-Fe-Mn-Ni CCAs in the literature. Overall, a substantial time savings was realized by employing HTP synthesis, irradiation, and characterization in this study compared to conventional techniques, the implications of which are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Hole Relaxation Bottlenecks in CdSe/CdTe/CdSe Lateral Heterostructures Lead to Bicolor Emission

Concentric lateral CdSe/CdTe/CdSe heterostructures show bicolor photoluminescence from both a red charge transfer band of the CdSe/CdTe interface and a green fluorescence from CdSe. Further, this work uses visible and near-infrared transient spectroscopy measurements to demonstrate that the deviation from Kasha's rule arises from a hole relaxation bottleneck from CdSe to CdTe. Hole transfer can take up to 1 ns, which permits radiative relaxation of excitons remaining in CdSe. Simulations indicate that the hole relaxation bottleneck arises due to the sparse density of states and poor spatial overlap of hole states at energies near the CdSe band edge. The divergent kinetics of transfer for band edge and hot holes is exploited to vary the ratio of green and red photoluminescence with excitation wavelength, providing another knob to control emission color. These findings support the use of lateral heterojunctions as a method for slowing carrier relaxation in two-dimensional materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Asymmetric Rowland circle geometries for spherically bent crystal analyzers in laboratory and synchrotron applications

Spherically bent crystal analyzers (SBCAs) are the dominant high-resolution hard X-ray optic in the ongoing rebirth of laboratory-based X-ray absorption fine structure (XAFS) and X-ray emission spectroscopy (XES) as well as in synchrotron methods such as high energy resolution fluorescence detection (HERFD) and non-resonant X-ray Raman scattering (XRS). In the overwhelming majority of cases, SBCAs are implemented in a ‘symmetric’ configuration on the Rowland circle, wherein the diffracting crystal plane is nominally coincident with the analyzer surface. We report here comprehensive investigations of ‘asymmetric’ operation of SBCA on the Rowland circle, wherein the diffracting crystal plane is not coincident with the optical surface of the analyzer. First, we have developed a laboratory spectrometer for XAFS and XES that is specialized for asymmetric SBCA operation. Here we find several benefits, including the capacity to use a single SBCA over a very wide energy range via ‘hkl hopping’ and the frequent ability to eliminate Johann error, the most prevalent energy-broadening mechanism when using SBCA symmetrically on the Rowland circle. Second, we expand these ideas to synchrotron facilities with a demonstration study of HERFD and XRS where asymmetric operation also provided advantage. Our results suggest that large-array systems for HERFD augmented with an additional mechanical degree of freedom could streamline user operation and also indicate benefits to XRS in the asymmetric configuration, where larger solid angle, larger sample-to-detector distance, and decreased Johann error can be achieved simultaneously.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

The ion-gas-neutral interactions with surfaces-2 (IGNIS-2) facility for the study of plasma–material interactions

The Ion-Gas-Neutral Interactions with Surfaces-2 (IGNIS-2) surface science facility has been designed at the Pennsylvania State University with the specific purpose of enabling experiments to study plasma–material interactions. This in situ surface modification and characterization facility consists of multiple reconfigurable substations that are connected through a central transfer chamber. This fully connected vacuum system ensures that the physical and chemical properties of samples are not altered between surface modification and analysis. The modification techniques in IGNIS-2 include a low-energy (<300 eV), high-flux (up to 1016 cm−2 s−1) broad-beam ion source, a liquid metal dropper, a lithium injection system, an RF sputter source, and an evaporator. Its characterization techniques include charged particle-based techniques, such as low-energy ion scattering (enabled by two <5 keV ion sources) and x-ray photoelectron spectroscopy, and photon and light-based techniques, such as x-ray fluorescence, multi-beam optical stress sensors, and optical cameras. All of these techniques can be utilized up to mTorr pressures, allowing both in situ and in operando studies to be conducted. Results are presented on lithium wetting experiments of argon-irradiated tungsten-based composites, surface stress measurements of tungsten films during deuterium ion irradiation, and temperature-programmed desorption of deuterium-irradiated graphite to demonstrate the in situ capabilities of this new facility.

Instruments & Instrumentation↗
DOE OSTI2024

Capacity Fade of Graphite/NMC811: Influence of Particle Morphology, Electrolyte, and Charge Voltage

LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) is an important Li-ion battery cathode material; however, there is a tradeoff between delivered capacity and capacity retention. As the charge potential increases the capacity rises but at the expense of capacity retention. The decrease in capacity retention has been ascribed to several factors including particle cracking, surface reconstruction, transition metal dissolution, and electrolyte reactivity. The present study compares 4.1 and 4.3 V charging limits in commercially relevant graphite/NMC811 pouch cells for single crystal (SC) and polycrystalline (PC) NMC811 with ethylene carbonate (EC)-containing or EC-free electrolytes. The electrochemistry is rationalized through analysis of electrochemical impedance spectroscopy, positive electrode X-ray photoelectron spectroscopy, soft X-ray absorption spectroscopy, X-ray diffraction, and negative electrode mapping by X-ray fluorescence. Graphite/SC-NMC811 cells show high-capacity retention at 4.1 V but exhibit degradation at 4.3 V charging potentials. The EC-free electrolyte cells led to higher capacity fade, especially when charged to 4.3 V. Cathode dissolution and deposition on the negative electrode from PC-NMC811 cells was higher than for samples from SC-NMC811 cells. This study reveals the impact of material type, charge voltage, and electrolyte composition on the reactions at the positive electrode, their influence on the negative electrode, and evolution with cycle number.

36 MATERIALS SCIENCE↗