Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Flow instabilities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Steady-State Thermal-Hydraulics Analyses for the Conversion of BR2 to Low Enriched Uranium Fuel

The code PLTEMP/ANL version 4.2 was used to perform the steady-state thermal-hydraulic analyses of the BR2 research reactor for conversion from Highly-Enriched to Low Enriched Uranium fuel (HEU and LEU, respectively). Calculations were performed to evaluate different fuel assemblies with respect to the onset of nucleate boiling (ONB), flow instability (FI), critical heat flux (CHF) and fuel temperature at beginning of cycle conditions. The fuel assemblies were characteristic of fresh fuel (0% burnup), highest heat flux (16% burnup), highest power (32% burnup) and highest burnup (46% burnup). Results show that the high heat flux fuel element is limiting for ONB, FI, and CHF, for both HEU and LEU fuel, but that the high power fuel element produces similar margin in a few cases. The maximum fuel temperature similarly occurs in both the high heat flux and high power fuel assemblies for both HEU and LEU fuel. A sensitivity study was also performed to evaluate the variation in fuel temperature due to uncertainties in the thermal conductivity degradation associated with burnup.

Licht, J.↗

PLTEMP/ANL Verification for Assemblies Having Five-Layer Fuel Tubes

PLTEMP/ANL v4.2 is a steady-state single-phase (light or heavy water) code used by ANL and by research laboratories in several countries since 1980 in the analysis of various research reactors whose cores contain assemblies made of multiple fuel plates or nested fuel tubes. This analysis is typically needed in the conversion of cores from highly-enriched uranium to low-enriched uranium. PLTEMP calculates temperature distribution and safety margins, i.e., onset of nucleate boiling ratio (ONBR), onset of Ledinegg flow instability ratio (OFIR), and critical heat flux ratio (CHFR). The analytical method in the code for calculating radial and axial temperature distributions in fuel assemblies having multiple nested coaxial fuel tubes was recently extended and verified to allow each tube to have five layers instead of three. The method also works for fuel assemblies having flat fuel plates by setting the radii of curvature of plates to large values ({approx}50 m). The method models heat sources in all five layers and in the coolant channels. To verify the extended method, an Excel spreadsheet was developed using an alternative solution method to calculate the temperature distribution in a reactor of two fuel assemblies, each made of two five-layer flat fuel plates. The code and the spreadsheet solution methods are described and their solutions are compared.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Generation of instability waves in flows separating from smooth surfaces

This paper analyses the coupling between an imposed disturbance and an instability wave that propagates downstream on a shear layer which emanates from a separation point on a smooth surface. Since the wavelengths of the most-amplified instability waves will generally be small compared with the streamwise body dimensions, the analysis is restricted to this 'high-frequency' limit and the solution is obtained by using matched asymptotic expansions. An 'inner' solution, valid near the separation point, is matched onto an outer solution, which represents an instability wave on a slowly diverging mean flow. The analysis relates the amplitude of this instability to that of the imposed disturbance.

Goldstein, M. E.↗

Inviscid vortex motions in weakly three-dimensional boundary layers and their relation with instabilities in stratified shear flows

We consider the inviscid instability of three-dimensional boundary-layer flows with a small crossflow over locally concave or convex walls, along with the inviscid instability of stratified shear flows. We show how these two problems are closely related through the forms of their governing equations. A proposed definition of a generalized Richardson number for the neutrally stable inviscid vortex motions is given. Implications of the similarity between the two problems are discussed.

Blackaby, Nicholas D.↗

Integrated Framework of Vehicle Dynamics, Instabilities, Energy Models, and Sparse Flow Smoothing Controllers

This work presents an integrated framework of: vehicle dynamics models, with a particular attention to instabilities and traffic waves; vehicle energy models, with particular attention to accurate energy values for strongly unsteady driving profiles; and sparse Lagrangian controls via automated vehicles, with a focus on controls that can be executed via existing technology such as adaptive cruise control systems. This framework serves as a key building block in developing control strategies for human-in-the-loop traffic flow smoothing on real highways. In this contribution, we outline the fundamental merits of integrating vehicle dynamics and energy modeling into a single framework, and we demonstrate the energy impact of sparse flow smoothing controllers via simulation results.

Lee, Jonathan W.↗

Three-dimensional magnetohydrodynamic Kelvin–Helmholtz instability of cylindrical flow with permeable boundaries

We study the linear magnetohydrodynamic Kelvin–Helmholtz instability of the interface between two viscous, incompressible, and electrically conducting fluids. The phases are enclosed between two coaxial cylindrical porous layers with the interface through which mass and heat transfer takes place. The fluids are subjected to a constant magnetic field parallel to the streaming direction, and the suction/injection velocities for the fluids at the permeable boundaries are also taken into account. Here, we use an irrotational theory in which the motion and pressure are irrotational, and the viscosity enters through the jump in the viscous normal stress in the normal stress balance at the interface. We consider both asymmetric and axisymmetric disturbances in our analysis. A quadratic dispersion relation is deduced and stability criterion is given in terms of a critical value of relative velocity, as well as, magnetic field. It has been observed that in the case of permeable boundaries, heat and mass transfer phenomena play a dual in the stability analysis. The flow through porous medium is more stable than the pure flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the Goertler instability in hypersonic flows: Sutherland law fluids and real gas effects

The Goertler vortex instability mechanism in a hypersonic boundary layer on a curved wall is investigated. The precise roles of the effects of boundary layer growth, wall cooling, and gas dissociation is clarified in the determination of stability properties. It is first assumed that the fluid is an ideal gas with viscosity given by Sutherland's law. It is shown that when the free stream Mach number M is large, the boundary layer divides into two sublayers: a wall layer of O(M sup 3/2) thickness over which the basic state temperature is O(M squared) and a temperature adjustment layer of O(1) thickness over which the basic state temperature decreases monotonically to its free stream value. Goertler vortices which have wavelengths comparable with the boundary layer thickness are referred to as wall modes. It is shown that their downstream evolution is governed by a set of parabolic partial differential equations and that they have the usual features of Goertler vortices in incompressible boundary layers. As the local wavenumber increases, the neutral Goertler number decreases and the center of vortex activity moves towards the temperature adjustment layer. Goertler vortices with wavenumbers of order one or larger must necessarily be trapped in the temperature adjustment layer and it is this mode which is most dangerous. For this mode, it was found that the leading order term in the Goertler number expansion is independent of the wavenumber and is due to the curvature of the basic state. This term is also the asymptotic limit of the neutral Goertler numbers of the wall mode. To determine the higher order corrections terms in the Goertler number expansion, two wall curvature cases are distinguished. Real gas effects were investigated by assuming that the fluid is an ideal dissociating gas. It was found that both gas dissociation and wall cooling are destabilizing for the mode trapped in the temperature adjustment layer, but for the wall mode trapped near the wall the effect of gas dissociation can be either destabilizing or stabilizing.

Fu, Yibin B.↗

On magnetothermal instability in cluster cooling flows

Lagrangian techniques appropriate to a local calculation are used to show that a weak ordered magnetic field can result in a generic condensational mode in cluster cooling flows. However, thermal instability appears possible only if the conductivity is well below its Spitzer value, for all nonradial wavenumbers. Wavenumbers not subject to conductive damping are subject to buoyant oscillations. It is shown that when instability is present, lateral magnetic confinement of high thermal pressure regions in the plasma by radial magnetic field lines is responsible in at least equal measure with radially directed magnetic tension for the suppression of oscillations and the reappearance of local condensational modes. The general importance of even very modest magnetic fields for destabilizing thermal time scale perturbations is emphasized.

Balbus, Steven A.↗

The Kelvin-Helmholtz instability in photospheric flows - Effects of coronal heating and structure

A series of hydrodynamic numerical simulations has been used to investigate the nonlinear evolution of driven, subsonic velocity shears under a range of typical photospheric conditions. These calculations show that typical photospheric flows are susceptible to the Kelvin-Helmholtz instability (KHI), with rapid nonlinear growth times that are approximately half of a typical granule lifetime. The KHI produces vortical structures in intergranule lanes comparable to a typical fluxule radius; this is precisely the correct scale for maximum power transfer to the corona.

Karpen, Judith T.↗

Effects of Mean Flow Profiles on Instability of a Low-Density Gas Jet Injected into a High-Density Gas

The objective of this study was to investigate the effects of the mean flow profiles on the instability characteristics in the near-injector region of low-density gas jets injected into high-density ambient gas mediums. To achieve this, a linear temporal stability analysis and a spatio-temporal stability analysis of a low-density round gas jet injected vertically upwards into a high-density ambient gas were performed by assuming three different sets of mean velocity and density profiles. The flow was assumed to be isothermal and locally parallel. Viscous and diffusive effects were ignored. The mean flow parameters were represented as the sum of the mean value and a small normal-mode fluctuation. A second order differential equation governing the pressure disturbance amplitude was derived from the basic conservation equations. The first set of mean velocity and density profiles assumed were those used by Monkewitz and Sohn for investigating absolute instability in hot jets. The second set of velocity and density profiles assumed for this study were the ones used by Lawson. And the third set of mean profiles included a parabolic velocity profile and a hyperbolic tangent density profile. The effects of the inhomogeneous shear layer and the Froude number (signifying the effects of gravity) on the temporal and spatio-temporal results for each set of mean profiles were delineated. Additional information is included in the original extended abstract.

Vedantam, Nanda Kishore↗

Instability of gravity flows on a slope

A Hamiltonian version of contour dynamics is formulated for the model of a potential slope flow of homogeneous incompressible fluid. The particle-like solutions that play the role of structural elements in the disintegration of strongly perturbed slope flows are studied in terms of this approach. Investigation of the solution instability mechanism has shown that two collapse scenarios are realized, depending on the slope steepness. The singularity for the surface shape develops according to the law (t - t{sub 0}){sup -1/3} on a vertical slope and slightly more slowly, according to the law (t - t{sub 0}){sup -2/7}, where t{sub 0} is the collapse time, on a nonvertical slope. A sufficient collapse criterion that allows this effect to be judged from the first three integrals of motion has been established.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Saturation of fishbone instability through zonal flows driven by energetic particle transport in tokamak plasmas

Gyrokinetic and kinetic-MHD simulations are performed for the fishbone instability in the DIII-D discharge #178631, chosen for validation of first-principles simulations to predict the energetic particle (EP) transport in an ITER prefusion baseline scenario. Fishbone modes are found to generate zonal flows, which dominate the fishbone saturation. The underlying mechanisms of the two-way fishbone-zonal flows nonlinear interplay are discussed in details. Numerical and analytical analyses identify the fishbone-induced EP redistribution as the dominant generation mechanism for zonal flows. The zonal flows modify the nonlinear dynamics of phase space zonal structures, which reduces the amount of EPs able to resonate with the mode, leading to an early fishbone saturation. Simulation results including zonal flows agree quantitatively with DIII-D experimental measurements of the fishbone saturation amplitude and EP transport, supporting this novel saturation mechanism by self- generated zonal flows. Moreover, the wave-particle mode-locking mechanism is shown to determine quantitatively the fishbone frequency down-chirping, as evident in GTC simulation results in agreement with predictions from analytical theory. Finally, the
fishbone-induced zonal flows are possibly responsible for the formation of an ion-ITB in the DIII-D discharge. Based on the low EP transport and the large zonal flow shearing rates associated with the fishbone instability in gyrokinetic simulations of the ITER scenario, it is conjectured that high performance scenarios could be designed in ITER burning plasmas through fishbone-induced ITBs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The growth of thermal instabilities in cooling flows

Numerical hydrodynamic simulations are used to determine the evolution of the condensation modes for thermal instabilities in 10 to the 6th to 10 to the 8th K gas. These simulations properly take into account the effects of nonequilibrium cooling below 10 to the 6th K. It is found that only perturbations greater than about 3 kpc develop shocks in the hot environment of cooling flows. These large perturbations evolve through three distinct phases: (1) the formation of a cold core, (2) a supersonic accretion phase onto the cold core which lasts for 10 to the 5th to 10 to the 6th yr with peak shock velocities about 120 km/s, and (3) a subsonic accretion phase. The X-ray emissivity and the optical-ultraviolet line emission associated with thermal instabilities are calculated. These calculations demonstrate that the optical emission from cooling flows probably does not arise from shocked condensations. The calculated optical emission lines are of a higher ionization level and a lower luminosity than the observations. Ultraviolet lines produced in the shocks may be detectable. The core must cool significantly after the shock has dissipated before star formation can commence.

David, Laurence P.↗

Flight-measured streamwise disturbance instabilities in laminar flow

NASA is presently conducting laminar-flow flight research to explore the limits of practical applications of laminar-flow drag reduction technology. An important aspect of this research involves studies of the dominant instability or instabilities responsible for initiating the transition process from laminar to turbulent flow. Recent subsonic flight experiments using an instrumented wing glove on a Lear 28/29 airplane measured the growth of the two-dimensional, viscous Tollmien-Schlichting (T-S) instability. The gloved wing section incorporated closely-spaced, flush-mounted, streamwise-located instrumentation for measuring the instability frequencies, surface temperatures, and pressure distributions. Flight conditions of the experiment includeed Mach numbers from 0.70 to 0.79 and chord Reynolds numbers from 10 to 20 million. An onboard engineer's station allowed for real-time analysis of the instability frequency data. In addition to a sample of results on the streamwise growth of instabilities, details of the glove and sensor installation and the onboard real-time data analysis system are given.

Lee, Cynthia C.↗

Kinetic-theory predictions of clustering instabilities in granular flows: beyond the small-Knudsen-number regime

In this work we quantitatively assess, via instabilities, a Navier–Stokes-order (small- Knudsen-number) continuum model based on the kinetic theory analogy and applied to inelastic spheres in a homogeneous cooling system. Dissipative collisions are known to give rise to instabilities, namely velocity vortices and particle clusters, for sufficiently large domains. We compare predictions for the critical length scales required for particle clustering obtained from transient simulations using the continuum model with molecular dynamics (MD) simulations. The agreement between continuum simulations and MD simulations is excellent, particularly given the presence of well-developed velocity vortices at the onset of clustering. More specifically, spatial mapping of the local velocity-field Knudsen numbers (Knu) at the time of cluster detection reveals Knu » 1 due to the presence of large velocity gradients associated with vortices. Although kinetic-theory-based continuum models are based on a small- Kn (i.e. small-gradient) assumption, our findings suggest that, similar to molecular gases, Navier–Stokes-order (small-Kn) theories are surprisingly accurate outside their expected range of validity.

42 ENGINEERING↗

Theory of the magnetothermal instability in coronal plasma flows

The theory of the magnetothermal instability (MTI) is revisited through the lens of the stability of uniform systems. The linear stability analysis includes flow advection and Nernst transport. The instability criteria derived distinguish between the convective and the absolute nature of the perturbation growth. It is proven that, in the region where the Nernst and plasma blowoff velocities cancel, the MTI can be absolute and wave-packet perturbations grow in situ. This instability is mediated by the internal feedback between the Biermann battery and Righi–Leduc terms. Here, the analysis is extended to derive the dispersion relation for short-wavelength perturbations developing in nonuniform profiles with the application to coronal plasmas. It is found that the condition for MTI requires the net B-field convection velocity to be small at the isothermal sonic section, and the plasma conditions in this section govern the dynamics of the instability. Analysis of hydro-equivalent implosions suggests that unstable perturbations undergo more e-foldings of growth in larger-size targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the Rayleigh–Kuo criterion for the tertiary instability of zonal flows

This study reports the stability conditions for intense zonal flows (ZFs) and the growth rate γ TI of the corresponding “tertiary” instability (TI) within the generalized Hasegawa–Mima plasma model. The analytical calculation extends and revises Kuo's analysis of the mathematically similar barotropic vorticity equation for incompressible neutral fluids on a rotating sphere [H.-L. Kuo, J. Meteor. 6, 105 (1949)]; then, the results are applied to the plasma case. An error in Kuo's original result is pointed out. An explicit analytical formula for γ TI is derived and compared with numerical calculations. It is shown that, within the generalized Hasegawa–Mima model, a sinusoidal ZF is TI-unstable if and only if it satisfies the Rayleigh–Kuo criterion (known from geophysics) and that the ZF wave number exceeds the inverse ion sound radius. For non-sinusoidal ZFs, the results are qualitatively similar. As a corollary, there is no TI in the geometrical-optics limit, i.e., when the perturbation wavelength is small compared to the ZF scale. Finally, this also means that the traditional wave kinetic equation, which is derived under the geometrical-optics assumption, cannot adequately describe the ZF stability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measuring Tollmien-Schlichting Instabilities In Laminar Flow

NASA flight experiment conducted to evaluate surface-mounted hot-film sensors designed to detect Tollmien-Schlichting (T-S) instability in boundary layer in flight. New technique has considerable value in applied research aimed at extending regions of natural laminar flow on aircraft. Aids research into mechanisms leading to transition from laminar to turbulent boundary layers. Makes it practical to take measurements in many locations on wing surface for tests in flight. Useful in studying transitions in such flow as those in pipes, ducts, channels, compressors, and diffusers.

Lee, Cynthia C.↗