Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FOSSIL FUELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Tuning Sugarcane Bagasse Biochar into a Potential Carbon Black Substitute for Polyethylene Composites

One of the most used carbonaceous materials by industry are carbon blacks, which have technological applications in polymeric composites, coatings and paints, electric and electrochemical devices. One drawback is that they are produced from fossil fuels. Although biochars are also carbonaceous materials some disadvantages like their larger particles size, high ash content and highly oxygenated surface must be overcome to enable their use as substitute of carbon blacks in composites. Sugarcane bagasse biochar was used to produce carbonaceous materials to substitute carbon blacks. Milling of biochar decreased particle size from several hundreds of micrometers to 100–500 nm and narrowed its size distribution. Chemical leaching reduced the inorganic compounds and ash content by almost 20%. Great advance was achieved when biochar was thermally annealed in alcohol vapor atmosphere which resulted in biochar-based material with very low oxygenated carbon species at particles surface and turned them hydrophobic. Almost no C–O/C=O and O–C=O peaks components were observed at the X-ray photoelectron spectroscopy spectrum. Reactive thermal annealing of the biochar based additive was a key procedure to obtain polyethylene composites (5% loading) with mechanical, thermal and colorimetric properties very close to the ones prepared with the carbon black from fossil fuels.

36 MATERIALS SCIENCE↗

Misrepresentation of the IPCC CO2 emission scenarios

Estimates of recent fossil fuel CO2 emissions have been compared with the IPCC SRES (Special Report on Emission Scenarios) emission scenarios that had been developed for analysis of future climate change, impacts and mitigation. In some cases this comparison uses averages across subgroups of SRES scenarios and for one category of greenhouse gases (industrial sources of CO2). That approach can be misleading and cause confusion as it is inconsistent with many of the papers on future climate change projections that are based on a specific subset of closely scrutinized SRES scenarios, known as illustrative marker scenarios. Here, we show that comparison between recent estimates of fossil fuel emissions trends and the SRES illustrative marker scenarios leads to the conclusion that recent trends are not outside the SRES range. Furthermore, the recent economic downturn appears to have brought actual emission back toward the middle of the SRES illustrative marker scenarios. We also note that SRES emission scenarios are designed to reflect potential alternative long-term trends in a world without climate policy intervention and the trend in the resulting climate change is not sensitive to short-term fluctuations.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A REVIEW ON BIOMASS DENSIFICATION TECHNOLOGIE FOR ENERGY APPLICATION

The world is currently facing challenges to reduce the dependence on fossil fuels and to achieve a sustainable renewable supply. Renewable energies represent a diversity of energy sources that can help to maintain the equilibrium of different ecosystems. Among the various sources of renewable energy, biomass is finding more uses as it is considered carbon neutral since the carbondioxide released during its use is already part of the carbon cycle (Arias et al., 2008). Increasing the utilization of biomass for energy can help to reduce the negative CO2 impact on the environment and help to meet the targets established in the Kyoto Protocol (UN, 1998). Energy from biomass can be produced from different processes like thermochemical (combustion, gasification, and pyrolysis), biological (anaerobic digestion, fermentation) or chemical (esterification) where direct combustion can provide a direct near-term energy solution (Arias et al., 2008). Some of the inherent problems with raw biomass materials, like low bulk density, high moisture content, hydrophilic nature and low calorific value, limit the ease of use of biomass for energy purposes (Arias et al., 2008). In fact, due to its low energy density compared to fossil fuels, high volumes of biomass will be needed; adding to problems associated with storage, transportation and feed handling at a cogeneration plant. Furthermore, grinding biomass pulverizes, can be very costly and in some cases impractical. All of these drawbacks have given rise to the development of new technologies in order to increase the quality of biomass fuels. The purpose of the work is mainly in four areas 1) Overview of the torrefaction process and to do a literature review on i) Physical properties of torrefied raw material and torrefaction gas composition. 2) Basic principles in design of packed bed i) Equations governing the flow of material in packed bed ii) Equations governing the flow of the gases in packed bed iii) Effect of physical properties of the raw materials on the packed bed design 3) Design of packed bed torrefier of different capacities. 4) Development of an excel sheet for calculation of length and diameter of the packed bed column based on the design considerations.

09 BIOMASS FUELS↗

MICROSTRUCTURE AND MECHANICAL PROPERTY PERFORMANCE OF COMMERCIAL GRADE API PIPELINE STEELS IN HIGH PRESSURE GASEOUS HYDROGEN

The continued growth of the world s developing countries has placed an ever increasing demand on traditional fossil fuel energy sources. This development has lead to increasing research and development of alternative energy sources. Hydrogen gas is one of the potential alternative energy sources under development. Currently the most economical method of transporting large quantities of hydrogen gas is through steel pipelines. It is well known that hydrogen embrittlement has the potential to degrade steel s mechanical properties when hydrogen migrates into the steel matrix. Consequently, the current pipeline infrastructure used in hydrogen transport is typically operated in a conservative fashion. This operational practice is not conducive to economical movement of significant volumes of hydrogen gas as an alternative to fossil fuels. The degradation of the mechanical properties of steels in hydrogen service is known to depend on the microstructure of the steel. Understanding the levels of mechanical property degradation of a given microstructure when exposed to hydrogen gas under pressure can be used to evaluate the suitability of the existing pipeline infrastructure for hydrogen service and guide alloy and microstructure design for new hydrogen pipeline infrastructure. To this end, the 2 Copyright 2010 by ASME microstructures of relevant steels and their mechanical properties in relevant gaseous hydrogen environments must be fully characterized to establish suitability for transporting hydrogen. A project to evaluate four commercially available pipeline steels alloy/microstructure performance in the presences of gaseous hydrogen has been funded by the US Department of Energy along with the private sector. The microstructures of four pipeline steels were characterized and then tensile testing was conducted in gaseous hydrogen and helium at pressures of 800, 1600 and 3000 psi. Based on measurements of reduction of area, two of the four steels that performed the best across the pressure range were selected for evaluation of fracture and fatigue performance in gaseous hydrogen at 800 and 3000 psi. This paper will describe the work performed on four commercially available pipeline steels in the presence of gaseous hydrogen at pressures relevant for transport in pipelines. Microstructures and mechanical property performances will be compared. In addition, recommendations for future work related to gaining a better understanding of steel pipeline performance in hydrogen service will be discussed.

08 HYDROGEN↗

Biofuels and Biotechnology

The world obtains 86% of its energy from fossil fuels, 40% from petroleum, a majority of which goes to the transportation sector (www.IEA.gov). Well-recognized alternatives are fuels derived from renewable sources known as biofuels. There are a number of biofuels useful for transportation fuels, which include ethanol, biobutanol, mixed alcohols, biodiesel, and hydrogen. These biofuels are produced from biologically derived feedstock, almost exclusively being plant materials, either food or feed sources or inedible plant material called biomass. This chapter will discuss technologies for production of liquid transportation biofuels from renewable feedstocks, but hydrogen will not be included, as the production technology and infrastructure are not near term. In addition, a specific emphasis will be placed upon the research opportunities and potential for application of system biology tools to dissect and understand the biological processes central to production of these biofuels from biomass and biological materials. There are a number of technologies for production of each of these biofuels that range from fully mature processes such as grain-derived ethanol, emerging technology of ethanol form cellulose derived ethanol and immature processes such thermochemical conversion technologies and production of hydrogen all produced from renewable biological feedstocks. Conversion of biomass by various thermochemical and combustion technologies to produce thermochemical biodiesel or steam and electricity provide growing sources of bioenergy. However, these technologies are outside of the scope of this chapter, as is the use of biological processing for upgrading and conversion of fossil fuels. Therefore, this chapter will focus on the current status of production of biofuels produced from biological-derived feedstocks using biological processes. Regardless of the status of development of the biological process for production of the biofuels, each process can benefit from research and resulting development activities using the latest biological research tools and techniques. Among the most recently evolving research tools is what is collectively known as "omics" techniques such as genomics, transcriptomics, proteomics, metabolomics, and fluxomics, plus an ever growing omics word generation . These and other similar methodologies are central to understanding the interactive functioning of gene expression, resulting protein/enzyme production, which impacts the cellular metabolism, and carbon and metabolite flow. These system biology "omics" tools are beginning to be applied to understand and improve the biological processes involved in conversion of renewable plant and animal material to biofuels which will be discussed in this chapter.

02 PETROLEUM↗

A Brief Review of the Application of 14C in Terrestrial Carbon Cycle Studies

An over-arching goal of the DOE TCP program is to understand the mechanistic controls over the fate, transport, and residence time of carbon in the terrestrial biosphere. Many of the modern process and modeling studies focus on seasonal to interannual variability. However, much of the carbon on the landscape and in soils is in separate reservoirs with turnover times that are multi-decadal to millennial. It is the controls on these longer term pools or reservoirs that is a critical unknown in the face of rising GHGs and climate change and uncertainties of the terrestrial biosphere as a future global sink or source of atmospheric CO{sub 2} [eg., Friedlingstein et al., 2006; Govindasamy et al., 2005; Thompson et al., 2004]. Radiocarbon measurements, in combination with other data, can provide insight into, and constraints on, terrestrial carbon cycling. Radiocarbon (t{sub 1/2} 5730yrs) is produced naturally in the stratosphere when secondary neutrons generated by cosmic rays collide with {sup 14}N atoms [Libby 1946; Arnold and Libby, 1949]. Upon formation, {sup 14}C is rapidly oxidized to CO and then to CO{sub 2}, and is incorporated into the carbon cycle. Due to anthropogenic activities, the amount of {sup 14}C in the atmosphere doubled in the mid/late 1950s and early 1960s from its preindustrial value of {sup 14}C/{sup 12}C ratio of 1.18 x 10{sup -12} [eg., Nydal and Lovseth, 1983]. Following the atmospheric weapons test ban in 1963, the {sup 14}C/{sup 12}C ratio, has decreased due to the net isotopic exchange between the ocean and terrestrial biosphere [eg., Levin and Hessheimer, 2000] and a dilution effect due to the burning of {sup 14}C-free fossil fuel carbon, the 'Suess Effect' [Suess, 1955]. In the carbon cycle literature, radiocarbon measurements are generally reported as {Delta}{sup 14}C, which includes a correction for mass dependent fractionation [Stuiver and Polach, 1977]. In the context of carbon cycle studies radiocarbon measurements can be used to determine the 'age' and rate of change of carbon stocks or as a biogeochemical tracer to elucidate processes and pathways. It is this dual nature that can be exploited across scales in space (individual plant, plot or research site, ecosystem, regional, and global) and time (days to millennia). For example, across regional scales, {Delta}{sup 14}C measurements of atmosphere CO{sub 2} can be used to attribute carbon dioxide to sources (e.g., respiration vs. fossil fuel emissions) or sinks ( e.g,. photosynthesis), which cannot be readily inferred from concentration, net flux measurements, or {delta}{sup 13}CO{sub 2} [eg. Graven et al., 2009; Levin and Hessheimer, 2000; Turnbull et al., 2007]. At smaller scales, similar analyses can be used to elucidate the source, and 'age' of the below ground component undergoing heterotrophic respiration. Net (biome or ecosystem) uptake of carbon is the difference of two large fluxes: photosynthesis and respiration. Carbon fixation by photosynthesis is, to a large extent, a single process with theoretical underpinnings. On the other-hand, net ecosystem or biome respiration integrates microbial (heterotrophic) and plant (autotrophic) respiration. Eddy covariance methods can be used to estimate bulk CO{sub 2} fluxes but they cannot discriminate the process nor the source of the respired CO{sub 2}. It is these processes that are parameterized in predictive models and contribute to the uncertainty in the climate forcing effect of the carbon cycle in the future [Friedlingstein et al., 2006; Heimann and Reichstein, 2008].

54 ENVIRONMENTAL SCIENCES↗

Implications of Limiting CO2 Concentrations for Land Use and Energy

This paper is the first to simultaneously examine the implications of extending the concept of placing a value on carbon beyond fossil fuel and industrial emissions to all sources, including those associated with land use and land use change. The paper reports a variety of results that have bearing on recent discussions in the literature regarding the role of bioenergy and the indirect emission of carbon through land-use change as well as the burgeoning literature on interactions between bioenergy and crop prices. This paper goes beyond results currently in the literature by using an integrated assessment model to assess energy use and supply, atmospheric composition, land use, and terrestrial carbon in the context of limiting the concentration of atmospheric CO2. We find that when the concept of valuing carbon emissions is extended to all carbon emissions, regardless of origin, that in contrast to a mitigation scenario where only fossil fuel and industrial carbon emissions are valued, deforestation is replaced by afforestation and expanded unmanaged ecosystems; the cost of limiting CO2 concentrations falls; crop prices rise; and human diets are transformed as people shift away from consumption of beef and other carbon-intensive protein sources. The increase in crop prices flows directly from the consideration of land-use change emissions in a comprehensive emissions mitigation program and occurs even in the absence of the use of purpose-grown bioenergy. Finally, we find that the assumed rate of improvement in food and fiber crop productivity (e.g. wheat, rice, corn) has a strong influence on land-use change emissions, making the technology for growing crops potentially as important for limiting atmospheric CO2 concentrations as energy technologies such as CO2 capture and storage.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Computational Analysis of the Pyrolysis of ..beta..-O4 Lignin Model Compounds: Concerted vs. Homolytic Fragmentation

The thermochemical conversion of biomass to liquid transportation fuels is a very attractive technology for expanding the utilization of carbon neutral processes and reducing dependency on fossil fuel resources. As with all such emerging technologies, biomass conversion through gasification or pyrolysis has a number of obstacles that need to be overcome to make these processes cost competitive with the refining of fossil fuels. Our current efforts have focused on the investigation of the thermochemistry of the linkages between lignin units using ab initio calculations on dimeric lignin model compounds. All calculations were carried out using M062X density functional theory at the 6-311++G(d,p) basis set. The M062X method has been shown to be consistent with the CBS-QB3 method while being significantly less computationally expensive. To date we have only completed the study on the b-O4 compounds. The theoretical calculations performed in the study indicate that concerted elimination pathways dominate over bond homolysis reactions under typical pyrolysis conditions. However, this does not mean that concerted elimination will be the dominant loss process for lignin. Bimolecular radical chemistry could very well dwarf the unimolecular pathways investigated in this study. These concerted pathways tend to form stable, reasonably non-reactive products that would be more suited producing a fungible bio-oil for the production of liquid transportation fuels.

09 BIOMASS FUELS↗

A study on tensile properties of Alloy 709 at various temperatures

In recent years, there have been several advancements in energy production from both fossil fuels and the alternate “clean” sources such as nuclear fission. These advancements are fueled by the need for more efficient systems that will optimize the use of the depleting fossil fuel reserves and shift the focus to cleaner sources of energy. The efficiency of any power generation cycle is dependent on the ability of the structural material to withstand increased peak operating temperatures. Advanced austenitic stainless steels have been in the focus as structural material for the next generation nuclear power plants, due to their strength, corrosion resistance, weldability and the wide range of temperatures at which the austenite phase is stable. Alloy 709, a recently developed advanced austenitic stainless steel, is being investigated in this paper. Here in this study, tensile tests were conducted on dog-bone samples of Alloy 709 in an in-situ scanning electron microscope (SEM) loading and heating stage, equipped with electron backscatter diffraction (EBSD), at various temperatures. The in-situ experiments indicated that the material primarily accommodated deformation by slip at lower temperatures. Void formation and coalescence at grain boundaries preceded slip at higher temperatures. Although crack initiation at all elevated temperatures was intergranular, the crack propagation through the material and the final fracture was transgranular ductile. Additionally, tensile tests were conducted on larger cylindrical samples at 550, 650 and 750 °C in air. The results of tests conducted in air and in-situ were found to be in agreement, at these temperatures.

36 MATERIALS SCIENCE↗

Detailed kinetic modeling study of n -pentanol oxidation

To help overcome the world’s dependence upon fossil fuels, suitable biofuels are promising alternatives that can be used in the transportation sector. Recent research on internal combustion engines shows that short alcoholic fuels (e.g., ethanol or n -butanol) have reduced pollutant emissions and increased knock resistance compared to fossil fuels. Although higher molecular weight alcohols (e.g., n -pentanol and n -hexanol) exhibit higher reactivity that lowers their knock resistance, they are suitable for diesel engines or advanced engine concepts, such as homogeneous charge compression ignition (HCCI), where higher reactivity at lower temperatures is necessary for engine operation. The present study presents a detailed kinetic model for n -pentanol based on modeling rules previously presented for n -butanol. This approach was initially validated using quantum chemistry calculations to verify the most stable n -pentanol conformation and to obtain C–H and C–C bond dissociation energies. In addition, the proposed model has been validated against ignition delay time data, speciation data from a jet-stirred reactor, and laminar flame velocity measurements. Overall, the model shows good agreement with the experiments and permits a detailed discussion of the differences between alcohols and alkanes.

30 DIRECT ENERGY CONVERSION↗

Impact of solar panels on global climate

Regardless of the harmful effects of burning fossil fuels on global climate1,2, other energy sources will become more important in the future because fossil fuels could run out by the early twenty-second century3 given the present rate of consumption4. This implies that sooner or later humanity will rely heavily on renewable energy sources. Here we model the effects of an idealized large-scale application of renewable energy on global and regional climate relative to a background climate of the representative concentration pathway 2.6 scenario (RCP2.6; ref. 5). We find that solar panels alone induce regional cooling by converting incoming solar energy to electricity in comparison to the climate without solar panels. The conversion of this electricity to heat, primarily in urban areas, increases regional and global temperatures which compensate the cooling effect. However, there are consequences involved with these processes that modulate the global atmospheric circulation, resulting in changes in regional precipitation.

Environmental Sciences & Ecology↗

Southward shift of the northern tropical belt from 1945 to 1980

Regardless of the harmful effects of burning fossil fuels on global climate1,2, other energy sources will become more important in the future because fossil fuels could run out by the early twenty-second century3 given the present rate of consumption4. This implies that sooner or later humanity will rely heavily on renewable energy sources. Here we model the effects of an idealized large-scale application of renewable energy on global and regional climate relative to a background climate of the representative concentration pathway 2.6 scenario (RCP2.6; ref. 5). We find that solar panels alone induce regional cooling by converting incoming solar energy to electricity in comparison to the climate without solar panels. The conversion of this electricity to heat, primarily in urban areas, increases regional and global temperatures which compensate the cooling effect. However, there are consequences involved with these processes that modulate the global atmospheric circulation, resulting in changes in regional precipitation.

Geology↗

Nannochloropsis oceanica IMET1 and its bacterial symbionts for carbon capture, utilization, and storage: biomass and calcium carbonate production under high pH and high alkalinity

ABSTRACT To combat the increasing levels of carbon dioxide (CO 2 ) released from the combustion of fossil fuels, microalgae have emerged as a promising strategy for biological carbon capture, utilization, and storage. This study used a marine microalgal strain, Nannochloropsis oceanica IMET1, which thrives in high CO 2 concentrations. A high-pH, high-alkalinity culture was designed for CO 2 capture through algal biomass production as well as permanent sequestration through calcium carbonate (CaCO 3 ) precipitation. This was accomplished by timed pH elevation and the addition of sodium bicarbonate to cultures of N. oceanica grown at lab scale (1 L) and pilot scale (500 L) with 10% and 5% CO 2 , respectively. Our data showed that 0.02 M NaHCO 3 promoted algal growth and that sparging cultures with ambient air after 12 days raised pH and created favorable CaCO 3 formation conditions. At the 1 L scale, we reached 1.52 g L −1 biomass after 12 days and an extra 9.3% CO 2 was captured in the form of CaCO 3 precipitates. At the 500 L pilot scale, an extra 60% CO 2 was captured (Day 40) with a maximum CO 2 capture rate of 63.2 g m −2 day −1 (Day 35). Bacterial communities associated with the microalgae were dominated by two novel Patescibacteria. Functional analysis revealed that genes for several plant growth-promotion traits (PGPTs) were enriched within this group. The microalgal-bacterial coculture system offers advantages for enhanced carbon mitigation through biomass production and simultaneous precipitation of recalcitrant CaCO 3 for long-term CO 2 storage. IMPORTANCE Capturing carbon dioxide (CO 2 ) released from fossil fuel combustion is of the utmost importance as the impacts of climate change continue to worsen. Microalgae can remove CO 2 through their natural photosynthetic pathways and are additionally able to convert CO 2 into a stable, recalcitrant form as calcium carbonate (CaCO 3 ). We demonstrate that microalgae-based carbon capture systems can be greatly improved with high pH and high alkalinity by providing optimal conditions for carbonate precipitation. Our results with the microalga, Nannochloropsis oceanica strain IMET1, show an extra 9.3% CO 2 captured as CaCO 3 at the 1 L scale and an extra 60% CO 2 captured at the 500 L (pilot) scale. Our optimized system provides a novel approach to capture CO 2 through two mechanisms: (i) as organic carbon within microalgal biomass and (ii) as inorganic carbon stored permanently in the form of CaCO 3.

20 FOSSIL-FUELED POWER PLANTS↗

Fuel Cell Backup Power System for Grid-Service and Micro-Grid in Telecommunication Applications

This paper presents the feasibility and economics of using fuel cell backup power systems in telecommunication cell towers to provide grid services (e.g., ancillary services, demand response). The fuel cells are able to provide power for the cell tower during emergency conditions. This study evaluates the strategic integration of clean, efficient, and reliable fuel cell systems with the grid for improved economic benefits. The backup systems have potential as enhanced capability through information exchanges with the power grid to add value as grid services that depend on location and time. The economic analysis has been focused on the potential revenue for distributed telecommunications fuel cell backup units to provide value-added power supply. This paper shows case studies on current fuel cell backup power locations and regional grid service programs. The grid service benefits and system configurations for different operation modes provide opportunities for expanding backup fuel cell applications responsive to grid needs. The objective of this work primarily focuses on how fuel cells can become a significant part of the telecom backup power to reduce system costs, environmental impact, and dependence on fossil fuels, while ensuring continuity of indispensable service for mobile users. The study identifies the approaches on the fuel cell application through nano/microgrids for an extensive network of fuel cells as distributed energy resources. The possibilities of various application scenarios extend the fuel cell technologies and microgrid for reliable power supply.

30 DIRECT ENERGY CONVERSION↗

A review on technological options of waste to energy for effective management of municipal solid waste

Highlights: • The current status, options and challenges of WTE techniques were analysed. • Incineration is the most widely used WTE technology in the developed countries. • Landfilling is the most common practice of MSWM in developing countries. • Approximately 50 million tonnes of methane is emitted annually from landfills. • WTE will ensure both the energy security and environmental protection. - Abstract: Approximately one-fourth population across the world rely on traditional fuels (kerosene, natural gas, biomass residue, firewood, coal, animal dung, etc.) for domestic use despite significant socioeconomic and technological development. Fossil fuel reserves are being exploited at a very fast rate to meet the increasing energy demands, so there is a need to find alternative sources of energy before all the fossil fuel reserves are depleted. Waste to energy (WTE) can be considered as a potential alternative source of energy, which is economically viable and environmentally sustainable. The present study reviewed the current global scenario of WTE technological options (incineration, pyrolysis, gasification, anaerobic digestion, and landfilling with gas recovery) for effective energy recovery and the challenges faced by developed and developing countries. This review will provide a framework for evaluating WTE technological options based on case studies of developed and developing countries. Unsanitary landfilling is the most commonly practiced waste disposal option in the developing countries. However, developed countries have realised the potential of WTE technologies for effective municipal solid waste management (MSWM). This review will help the policy makers and the implementing authorities involved in MSWM to understand the current status, challenges and barriers for effective management of municipal solid waste. This review concluded WTE as a potential renewable source of energy, which will partly meet the energy demand and ensure effective MSWM.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Genetically Engineered Magnetic Algae A Leap toward Affordable Biofuel from Algae

From the earliest days of internal-combustion engines, technological visionaries dreamed about engines running on fuel made from plants. In those early days, however, it was much easier to refine fuels from crude oil, which could be obtained cheaply in many parts of the world by simply drilling a hole in the ground. However, humanity now knows that the supply of fossil fuel is limited. One day, we will run out of fossil fuel, and we will need fuel from alternative sources. One possible alternative is biofuels, but these remain a dream away today, simply because producing such fuels costs as much as $\$$10 per gallon and requires petroleum products for their production. But this long-held dream may transcend the veil of sleep into the realm of reality, thanks to the development of a technology designed to harvest algae more easily and cost effectively—algae that are major candidates for producing tomorrow’s biofuels. At Los Alamos National Laboratory, we have developed the world’s first “magnetic algae.” We say magnetic, but more specifically our genetically engineered algae are paramagnetic. Paramagnetic materials are themselves not magnetic. Instead, such materials are pulled by magnetic fields. Hence, a magnetic needle made from soft iron is actually paramagnetic, because a magnet can pull it from a haystack. For the first time ever, we have genetically modified a model algae strain to make what is called intracellular magnetic nanoparticles.

09 BIOMASS FUELS↗

Sustainable biofuel contributions to carbon mitigation and energy independence

The growing interest in US biofuels has been motivated by two primary national policy goals, (1) to reduce carbon emissions and (2) to achieve energy independence. However, the current low cost of fossil fuels is a key barrier to investments in woody biofuel production capacity. The effectiveness of wood derived biofuels must consider not only the feedstock competition with low cost fossil fuels but also the wide range of wood products uses that displace different fossil intensive products. Alternative uses of wood result in substantially different unit processes and carbon impacts over product life cycles. We developed life cycle data for new bioprocessing and feedstock collection models in order to make life cycle comparisons of effectiveness when biofuels displace gasoline and wood products displace fossil intensive building materials. Wood products and biofuels can be joint products from the same forestland. Furthermore, substantial differences in effectiveness measures are revealed as well as difficulties in valuing tradeoffs between carbon mitigation and energy independence.

09 BIOMASS FUELS↗

Sustainable Aviation Fuel from High-Strength Wastewater via Membrane-Assisted Volatile Fatty Acid Production: Experimental Evaluation, Techno-economic, and Life-Cycle Analyses

To reduce emissions from combustion of fossil fuels, sustainable aviation fuels (SAFs) have the potential to decarbonize the aviation sector. Redirecting wastes from conventional waste management practices and using them as cost-effective feedstocks for low-carbon fuels can reduce emissions from both waste disposal and fuel combustion. One approach is to upgrade wet wastes to SAF precursors, such as volatile fatty acids (VFAs). Here, in this study, novel membrane-assisted arrested methanogenesis was developed to convert high-strength wastewater to VFAs. Based on experimental results of VFA production, techno-economic and life-cycle analyses were conducted to estimate the potential economic and environmental benefits of SAF production from high-strength wastewater via VFAs. By evaluating three proposed scenarios for VFA production, a minimum production cost of VFA is achieved at $\$$0.60/kg VFA at a wastewater flow rate of 1100 MT/d. For the corresponding VFA-derived SAF, the estimated minimum fuel selling price is $\$$4.64/gasoline gallon equivalent. The life-cycle analysis shows that up to a 71% reduction in greenhouse gas emissions can be achieved relative to its fossil-counterpart along with lower water and fossil-fuel consumption.

09 BIOMASS FUELS↗