Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FISSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Structure of Nd 155 and Gd 163 from Cf 252 spontaneous fission

Background: A puzzle has arisen recently caused by the apparent shift in maximum deformation from the expected 66 Dy isotopic chain to the Nd 60 isotopic chain in the 82 155 Nd and 163 Gd, useful for constraining parameters in models that seek to answer the six proton shift in maximum deformation. Method: Data from the spontaneous fission of 252 Cf were taken by the Gammasphere detector array at Lawrence Berkeley National Laboratory to observe the excited states of 155 Nd and 163 Gd. Results: The structure of 163 Gd has been expanded with the addition of two new levels and three new γ rays, which are found to be consistent with previously published calculations and the structure of 165 Dy. In 155 Nd, nine new levels and 12 new γ rays are observed. The spins and parities of the previously known levels in 155 Nd have been reassigned from a ν3/2 - [521] ground state configuration to a ν5/2 + [642] isomeric configuration by comparison of these newly observed levels with levels in 153 Nd and 155 Sm. Conclusion: Further experimentation is required to determine the energy of the newly reassigned ν5/2+[642] level in 155 Nd with respect to the suspected ν3/2-[521] ground state. Additionally, more experiments should be conducted to further determine the structure of neutron rich nuclei, rarely produced in the spontaneous fission of 252 Cf, such as 163 Gd.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Erratum: Monoenergetic photon-induced fission cross-section ratio measurements for U 235 , U 238 , and Pu 239 from 9.0 to 17.0 MeV

In this erratum we report a correction to the previously published photofission cross-section ratio data. The actinide fission-chamber foils utilized in this work were extensively characterized during a new campaign using α- and γ-ray spectroscopy, and 2π alpha counting. These three techniques agreed, resulting in an improved accuracy of the fission-chamber foil masses used in the original experiment. The foil masses measured by α spectroscopy are detailed in Table I. All foils were counted on the same α spectrometer, using an identical geometry, which reduces the systematic uncertainty in the calculated mass ratios since the α spectrometer efficiency cancels out in the ratio. This results in a relative uncertainty on the mass ratio of 1.0% for 235 U/ 238 U, 0.62% for 239 Pu/ 235 U, and 1.1% for 239 Pu/ 238 U. The published cross-section ratio data are re-calculated to reflect the updated target masses and uncertainties. The new mass values cause a 2.40% decrease for the σ( 235 U(γ, f)/ 238 U(γ, f)) ratio, a 5.10% decrease for the σ( 235 U(γ, f)/ 239 Pu(γ, f)) ratio, and a 2.77% decrease for the σ( 238 U(γ, f)/ 239 Pu(γ, f)) ratio. The updated cross-section ratios are presented in Tables II, III, and IV, which are corrected versions of Tables III, IV, and V in Ref. [1]

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Intermolecular vibrations mediate ultrafast singlet fission

Singlet fission is a spin-allowed exciton multiplication process in organic semiconductors that converts one spin-singlet exciton to two triplet excitons. It offers the potential to enhance solar energy conversion by circumventing the Shockley-Queisser limit on efficiency. We study the primary steps of singlet fission in a pentacene film by using a combination of TG and 2D electronic spectroscopy complemented by quantum chemical and nonadiabatic dynamics calculations. We show that the coherent vibrational dynamics induces the ultrafast transition from the singlet excited electronic state to the triplet-pair state via a degeneracy of potential energy surfaces, i.e., a multidimensional conical intersection. Significant vibronic coupling of the electronic wave packet to a few key intermolecular rocking modes in the low-frequency region connect the excited singlet and triplet-pair states. Along with high-frequency local vibrations acting as tuning modes, they open a new channel for the ultrafast exciton transfer through the resulting conical intersection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Impact of Spontaneous Fission Neutron Emission Energy on Neutron Detector Response

A parametric study was simulated in MCNP to investigate the impact of spontaneous fission neutron energy on neutron detector response. A total of 880 configurations were simulated by varying 3 He pressure and polyethylene reflector thickness for 8 different isotopes. Results showed that deviations between the simulated isotopes become more prevalent at higher energies with 238 U showing the greatest deviation. It was also observed that configurations comparable to most detection setups, 10 atm and 6 - 8 cm polyethylene, were closer to the upper bound of deviations from a 252 Cf. 240 Pu, a common spontaneous fission source of interest, ranged from 2% - 3% within this space. This suggests that further investigation is required to determine exact correction factors when calibrating neutron detectors with a 252 Cf. Although demonstrated here for a 4π-detection system, future plans include simulating a more detailed model of the MC-15 detection setup to determine exact correction factors for future experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Fission In R-process Elements (FY20 Q2 Quarterly Report)

The goal of the FIRE topical collaboration in nuclear theory is to determine the astrophysical conditions of the rapid neutron capture process (r-process), which is responsible for the formation of heavy elements. This will be achieved by including in r-process simulations the most advanced models of fission (spontaneous, neutron-induced, β-delayed) that have been developed at LLNL and LANL. The collaboration is composed of LLNL (lead) and LANL for fission work, BNL for nuclear data management, and the university of Notre Dame and North Carolina State University for r-process simulations. Under DOE/NNSA agreement, both universities receive funds from DOE Office of Science, while national laboratories receive funds directly from NA221.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Statistical Tests for Diagnosing Fission Source Convergence and Undersampling in Monte Carlo Criticality Calculations [Slides]

There is a very strong need for statistical testing to determine fission source convergence in Monte Carlo criticality calculations. Automation of such tests will greatly streamline and support the work carried out by NCS practitioners. Recent R&D work has shown that no single statistical test for convergence is sufficiently reliable, robust, and “guaranteed.” However, a combination of several standard statistical tests for the similarity of distributions, coupled with a high-fidelity estimate of the fission-matrix source is sufficiently robust, reliable, and repeatable that convergence can be “guaranteed.” During the course of the EG-AMCT studies, a number of statistical metrics and tests were proposed for diagnosing clustering and undersampling. None of these was robust and reliable enough for practical use in production codes. However, the expert group efforts came close. Some recent R&D work stemming from those past efforts has been very successful and promising. This Sub-Group will provide international input and collaboration on the development and implementation of statistical tests for convergence, with the primary goal of having the MC codes automatically detect convergence (or lack thereof). Newly proposed statistical tests to detect undersampling (after convergence) will also be reviewed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Fission In R-process Elements - FY2020

The goal of the FIRE topical collaboration in nuclear theory is to determine the astrophysical conditions of the rapid neutron capture process (r-process), which is responsible for the formation of heavy elements. This will be achieved by including in r-process simulations the most advanced models of fission (spontaneous, neutron-induced, β-delayed) that have been developed at LLNL and LANL. The collaboration is composed of LLNL (lead) and LANL for work on nuclear data (ground-state properties, fission, β-decay), BNL for nuclear data management, and the university of Notre Dame and North Carolina State University for r-process simulations. Under DOE/NNSA agreement, both universities receive funds from the DOE Office of Science, while national laboratories receive funds directly from NA221.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Fission Gas Measurements in Spent Fuel: Literature Review

The fission-derived noble gases, xenon(Xe) and krypton(Kr), have long been proposed as a tool for supporting nuclear safeguards and declarations verification. A vast body of literature outlines how these non-reactive fission gases released during reactor operation and shutdowns correlate to burnup level, power history, other reactor specifications and reprocessing activities. However, irradiation conditions can vary appreciably both radially and axially within a fuel pin.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Fission In R-process Elements (Q4 FY2020 Quarterly Report)

The goal of the FIRE topical collaboration in nuclear theory is to determine the astrophysical conditions of the rapid neutron capture process (r-process), which is responsible for the formation of heavy elements. This will be achieved by including in r-process simulations the most advanced models of fission (spontaneous, neutron-induced, β-delayed) that have been developed at LLNL and LANL. The collaboration is composed of LLNL (lead) and LANL for fission work, BNL for nuclear data management, and the university of Notre Dame and North Carolina State University for r-process simulations. Under DOE/NNSA agreement, both universities receive funds from DOE Office of Science, while national laboratories receive funds directly from NA221.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Fission In R-process Elements (Q1 FY2021)

The goal of the FIRE topical collaboration in nuclear theory is to determine the astrophysical conditions of the rapid neutron capture process (r-process), which is responsible for the formation of heavy elements. This will be achieved by including in r-process simulations the most advanced models of fission (spontaneous, neutron-induced, β-delayed) that have been developed at LLNL and LANL. The collaboration is composed of LLNL (lead) and LANL for fission work, BNL for nuclear data management, and the university of Notre Dame and North Carolina State University for r-process simulations. Under DOE/NNSA agreement, both universities receive funds from DOE Office of Science, while national laboratories receive funds directly from NA221

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Fission In R-Process Elements

The goal of the FIRE topical collaboration in nuclear theory is to determine the astrophysical conditions of the rapid neutron capture process (r-process), which is responsible for the formation of heavy elements. This will be achieved by including in r-process simulations the most advanced models of fission (spontaneous, neutron-induced, β-delayed) that have been developed at LLNL and LANL. The collaboration is composed of LLNL (lead) and LANL for fission work, BNL for nuclear data management, and the university of Notre Dame and North Carolina State University for r -process simulations. Under DOE/NNSA agreement, both universities receive funds from DOE Office of Science, while national laboratories receive funds directly from NA221.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Including 238 U(n,f)/ 235 U(n,f) and 239 Pu(n,f)/ 235 U(n,f) NIFFTE fission TPC Cross-sections into the Neutron Data Standards Database

The primary purpose of this report is to document how the 238 U/ 235 U and 239 Pu/ 235 U neutron induced fission cross-section ratios, 238 U(n,f)/ 235 U(n,f) and 239 Pu(n,f)/ 235 U(n,f), respectively, measured by the NIFFTE fission Time Projection Chamber (fissionTPC) were included in the most recent database (termed GMA) underlying Neutron Data Standards (NDS) evaluations. This report shows and discusses NDS input files, and underlying assumptions regarding the uncertainty estimate and necessary for including these data. This uncertainty estimate and the resulting files were based on information provided by fissionTPC experimentalists, R.J.Casperson, N.S. Bowden, L. Snyder and K.T. Schmitt for the 238 U ratio, and by L. Snyder for the 239 Pu ratio. The fissionTPC data were included twice, by D. Neudecker and V. Pronyaev, to counter-check results and exclude possible mistakes in their inclusion. It is shown in both evaluations that including fissionTPC 239 Pu(n,f)/ 235 U(n,f) data points to a lower evaluated 239 Pu(n,f) cross section above 10 MeV than the currently released NDS data. This raises the question whether a part of a previous dataset by Tovesson et al., that was previously rejected above 13 MeV for having low values, should be included in the NDS evaluation after all. The evaluated 238 U(n,f) cross section only changes significantly close to the threshold. The impact on the 235 U(n,f) cross section is minimal. fissionTPC data reduce evaluated uncertainties on both observables by 0–12% of the GMA evaluated uncertainties. However, the currently released NDS data contain in addition to these GMA evaluated uncertainties “Unrecognized Sources of Uncertainties” (USU) of 1.2%. It needs to be further discussed within the NDS project, whether the new fissionTPC data should also reduce USU.

238U(n,f)/235U(n,f)↗
DOE OSTI2021

Fission In R-Process Elements

The goal of the FIRE topical collaboration in nuclear theory is to determine the astrophysical conditions of the rapid neutron capture process (r-process), which is responsible for the formation of heavy elements. This will be achieved by including in r-process simulations the most advanced models of fission (spontaneous, neutron-induced, β-delayed) that have been developed at LLNL and LANL. The collaboration is composed of LLNL (lead) and LANL for fission work, BNL for nuclear data management, and the university of Notre Dame and North Carolina State University for r-process simulations. Under DOE/NNSA agreement, both universities receive funds from DOE Office of Science, while national laboratories receive funds directly from NA221.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Fission Induced Radiolysis of Uranyl Sulfate Solutions

At Argonne National Laboratory, an experimental pilot facility is being tested for the production of the medical isotope molybdenum-99 ( 99 Mo). AMORE (Argonne Molybdenum Research Experiment) is an experimental pilot facility in which a 40 MeV electron beam from the LINAC strikes a depleted uranium (DU) target. The target generates high energy neutrons, which are thermalized in an 18-liter uranyl sulfate solution of low enriched uranium (LEU). Thermalized neutrons fission the uranium-235 ( 235 U) to produce 99 Mo as well as many other fission products. The 99 Mo is recovered from the uranium solution and purified. The goal of our work is to reduce the use of highly enriched uranium (HEU) for the production of this isotope.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2021

Modifications to LEU-Modified Cintichem Process to Allow Processing of Fission-Produced 99 Mo from Up to 750 g of Irradiated Uranium Targets

Eden Radioisotopes, LLC is developing a TRIGA* -sized, 2 MW all-target reactor system licensed from Sandia National Laboratories. This all-target reactor uses up to 60 Argonne-designed annular LEU-foil targets to produce fission-produced 99 Mo. The Eden low-enriched uranium (LEU) target contains ~137 g of uranium and will be irradiated at up to 30 kW, with a target burnup determined by the number of targets processed each week. The annular target utilizes metallic uranium foils 400 mm long by 72 mm wide by 250±25 -µm-thick covered by a thin (10 µm on each face) nickel fission barrier. The foil is placed between two 35 mil aluminum tubes that form the outer and inner walls of the cladding cylinder, which is hydroformed to provide high thermal conductivity within the target. Eden expects to process between three and five targets per process batch, to maintain the process batch 99 Mo inventory at or below 5000 curies to maintain high 99 Mo recovery, within a few hours of discharge from the reactor. Eden expects to meet full U.S. demand by processing 30 targets per week, with each target operated for two weeks at 30 kW. To meet less than full U.S. demand, both the target power and the number of targets processed weekly will be adjusted. With increased 99 Mo production and given the size of U targets processed in a single batch (up to ~750g-U), it is important to identify whether any modifications are needed to the LEU-modified Cintichem process.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Fission In R-Process Elements

The goal of the FIRE topical collaboration in nuclear theory was to determine the astrophysical conditions of the rapid neutron capture process (r-process), which is responsible for the formation of heavy elements. This was be achieved by including in r-process simulations the most advanced models of fission (spontaneous, neutron-induced, β-delayed) that have been developed at LLNL and LANL. The collaboration was composed of LLNL (lead) and LANL for fission work, BNL for nuclear data management, and the university of Notre Dame and North Carolina State University for r-process simulations. Under DOE/NNSA agreement, both universities received funds from DOE Office of Science, while national laboratories receive funds directly from NA221.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Improving Fission Products at CARIBU: Near Field Detection (Q1/FY22 Quarterly Progress Report)

We worked with our collaborators at ANL to perform a measurement of the masses (and therefore energy difference) of the isomer and ground state for several fission products. The results of that measurement will have an impact on fission yields as well as on astrophysical calculations of r-process nucleosynthesis. We are currently analyzing the results of these measurements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Development and Standup Testing of a System to Observe Fission Gas Release During Transient Heating of Nuclear Fuel Element Segments

As part of an effort to increase the burnup of nuclear fuels used in Light Water Reactors, the mechanisms and timing of fission gas release during high temperature transients must be studied. In this work, a system was built to observe fission gas release of fuel element sections under evacuated conditions, at temperatures up to 800 °C. System capabilities and limitations are overviewed in this report. The system was further tested with a hydrogen-infused titanium foils and gas release was observed in agreement with literature observations. Pressure was monitored with two sensors, and temperature was monitored using a thermocouple and a pyrometer with continuous visual imaging.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗