Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FERROMAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Investigation on the antiferromagnetic component in the intrinsic exchange bias in structurally single phase Cr{sub 2}Te{sub 3} thin film

We report the intrinsic exchange bias in structurally single phase Cr{sub 2}Te{sub 3} thin film grown by low temperature molecular beam epitaxy. The hysteresis loop shift is confirmed due to the ferromagnet/antiferromagnet coupling rather than surface spin disorder effect or minor loop effect. The AFM component attributing to the exchange bias stems from the vacancy Cr layer in Cr{sub 2}Te{sub 3} and is of two dimensions. The magnetic properties of the AFM component are investigated by studying the temperature dependence and the measure field dependence of coercivity and hysteresis loop shift. The blocking temperature is determined to be about 110 K. It is found that the two dimensional AFM component would lose its irreversibility for larger applied measure field.

36 MATERIALS SCIENCE↗

Absence of strain-mediated magnetoelectric coupling at fully epitaxial Fe/BaTiO{sub 3} interface (invited)

Interfacial MagnetoElectric coupling (MEC) at ferroelectric/ferromagnetic interfaces has recently emerged as a promising route to achieve electrical writing of magnetic information in spintronic devices. For the prototypical Fe/BaTiO{sub 3} (BTO) system, various MEC mechanisms have been theoretically predicted. Experimentally, it is well established that using BTO single crystal substrates MEC is dominated by strain-mediated mechanisms. In case of ferromagnetic layers epitaxially grown onto BTO films, instead, no direct evidence for MEC has been provided, apart from the results obtained on tunneling junction sandwiching a BTO tunneling barrier. In this paper, MEC at fully epitaxial Fe/BTO interface is investigated by Magneto-Optical Kerr Effect and magnetoresistance measurements on magnetic tunnel junctions fabricated on BTO. We find no evidence for strain-mediated MEC mechanisms in epitaxial systems, likely due to clamping of BTO to the substrate. Our results indicate that pure electronic MEC is the route of choice to be explored for achieving the electrical writing of information in epitaxial ferromagnet-ferroelectric heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiferroic properties of sputtered BiFeO{sub 3} thin films

A cosputtering method was used to deposit BiFeO{sub 3} thin films on Pt/Ti/SiO{sub 2}/Si substrates. It was confirmed as a polycrystalline film with a tetragonal crystal structure in the annealed state. Both Fe{sup 2+} and Fe{sup 3+} ions were found to coexist in the film. The leakage current density is as low as 10{sup -3} A/cm{sup 2} at 120 kV/cm. This sputtered film shows multiferroic properties exhibiting a saturated ferroelectric loop with a large remnant polarization of 37 {mu}C/cm{sup 2} and a saturated ferromagnetic loop with saturation magnetization of 21 emu/cm{sup 3} at room temperature.

36 MATERIALS SCIENCE↗

Multiferroic properties in Ba{sub 0.93}Bi{sub 0.07}Ti{sub 1-x}Mn{sub x}O{sub 3} ceramics

Nominal composition of Ba{sub 0.93}Bi{sub 0.07}Ti{sub 1-x}Mn{sub x}O{sub 3} (x=0, 0.02, and 0.04) ceramics have been prepared by a modified Pechini method. X-ray diffraction analysis reveals that the samples are pure perovskite BaTiO{sub 3} (BTO) structure with no trace of impurity phase. The cell volume of the composites increases monotonously with the increase in Mn content, which indicates that Mn ions have been incorporated into the lattice of Ba{sub 0.93}Bi{sub 0.07}TiO{sub 3}. The samples are experimentally confirmed to show ferromagnetic (FM) and ferroelectric behaviors simultaneously at room temperature. The temperature dependent magnetic behaviors show complex magnetic interactions including FM, antiferromagnetic, and paramagnetic. These results suggest that the dopant Bi and Mn help BTO transit from pure ferroelectric to multiferroic materials and the magnetic behaviors can be explained by the bound magnetic polaron model with inhomogeneity of Mn dopant distribution.

36 MATERIALS SCIENCE↗

Low-temperature ferromagnetic properties in Co-doped Ag{sub 2}Se nanoparticles

β-Ag{sub 2}Se is a topologically nontrivial insulator. The magnetic properties of Co-doped Ag{sub 2}Se nanoparticles with Co concentrations up to 40% were investigated. The cusp of zero-field-cooling magnetization curves and the low-temperature hysteresis loops were observed. With increasing concentration of Co{sup 2+} ions mainly substituting Ag{sub I} sites in the Ag{sub 2}Se structure, the resistivity, Curie temperature T{sub c}, and magnetization increased. At 10 T, a sharp drop of resistance near T{sub c} was detected due to Co dopants. The ferromagnetic behavior in Co-doped Ag{sub 2}Se might result from the intra-layer ferromagnetic coupling and surface spin. This magnetic semiconductor is a promising candidate in electronics and spintronics.

36 MATERIALS SCIENCE↗

Ferroelectric and dielectric properties of ferrite-ferroelectric ceramic composites

Particulate composites of ferrite and ferroelectric phases with xNiFe{sub 2}O{sub 4} (NF) and (1 - x)Pb{sub 0.988}(Zr{sub 0.52}Ti{sub 0.48}){sub 0.976}Nb{sub 0.024}O{sub 3} (where x = 2, 10, 20, 30, 50, 70, and 100 wt. %) were prepared in situ by sol-gel method. The presence of a diphase composition was confirmed by X-ray diffraction while the microstructure of the composites was studied by scanning electron microscopy revealing a good mixing of the two phases and a good densification of the bulk ceramics. The dielectric permittivity shows usual dielectric dispersion behavior with increasing frequency due to Maxwell-Wagner interfacial polarization. AC conductivity measurements made in frequency range 1 Hz-1 MHz suggest that the conduction process is due to mixed polaron hopping. The effect of NF phase concentration on the P-E and M-H hysteresis behavior and dielectric properties of the composites was investigated. At low NF concentration a sharp ferro-paraelectric transition peak can be observed at around 360 Degree-Sign C while for higher NF concentrations a trend to a diffuse phase transition occurs. All the composite samples exhibit typical ferromagnetic hysteresis loops, indicating the presence of ordered magnetic structure.

36 MATERIALS SCIENCE↗

Theory of huge tunneling magnetoresistance in graphene

We investigate theoretically the spin-independent tunneling magnetoresistance effect in a graphene monolayer modulated by two parallel ferromagnets deposited on a dielectric layer. For the parallel magnetization configuration, Klein tunneling can be observed in the transmission spectrum but at specific oblique incident angles. For the antiparallel magnetization configuration, the transmission can be blocked by the magnetic-electric barrier provided by the ferromagnets. Such a transmission discrepancy results in a tremendous magnetoresistance ratio and can be tuned by the inclusion of an electric barrier.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interferometric properties of standing spin waves and the application to a phase comparator

We numerically studied the material and structural parameter dependence of interferometric properties of the standing spin wave resonance (SSWR) by micromagnetic simulations and demonstrate the feasibility of practical application to an integrated phase comparator. The micromagnetic configuration of the synthesized SSWR emitted from the two microwave currents flowing through the parallel strip lines depends on the phase difference Δϕ between them. Resultantly, the Δϕ is converted to the related output voltage with an overlaid phase detector, inductively coupled to the magnetic strip. Among the investigated various material systems, low damping (α ∼ 0.001) metallic ferromagnets are found to exhibit superior device performance due to the reduced viscous dissipation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular Beam Epitaxy of Materials Interfaces with Atomic Precision

In this contribution a few selected examples to engineer material interfaces in nanostructured solids with atomic precision by means of molecular beam epitaxy (MBE) are presented. The examples include 2D electron gas systems for quantum transport and mesoscopic physics, quantum cascade lasers, Sb-based materials, ferromagnet-semiconductor heterostructures, as well as oxide materials for electronics and quantum physics. Finally, the prospects to fabricate novel van-der-Waals heterostructures are briefly discussed.

36 MATERIALS SCIENCE↗

Is spin transport through molecules really occurring in organic spin valves? A combined magnetoresistance and inelastic electron tunnelling spectroscopy study

Molecular and organic spintronics is an emerging research field which combines the versatility of chemistry with the non-volatility of spintronics. Organic materials have already proved their potential as tunnel barriers (TBs) or spacers in spintronics devices showing sizable spin valve like magnetoresistance effects. In the last years, a large effort has been focused on the optimization of these organic spintronics devices. Insertion of a thin inorganic tunnel barrier (Al{sub 2}O{sub 3} or MgO) at the bottom ferromagnetic metal (FM)/organic interface seems to improve the spin transport efficiency. However, during the top FM electrode deposition, metal atoms are prone to diffuse through the organic layer and potentially short-circuit it. This may lead to the formation of a working but undesired FM/TB/FM magnetic tunnel junction where the organic plays no role. Indeed, establishing a protocol to demonstrate the effective spin dependent transport through the organic layer remains a key issue. Here, we focus on Co/Al{sub 2}O{sub 3}/Alq{sub 3}/Co junctions and show that combining magnetoresistance and inelastic electron tunnelling spectroscopy measurements one can sort out working “organic” and short-circuited junctions fabricated on the same wafer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exotic exchange bias at epitaxial ferroelectric-ferromagnetic interfaces

Multiferroics in spintronics have opened up opportunities for future technological developments, particularly in the field of ferroelectric (FE)-ferromagnetic (FM) oxide interfaces with functionalities. We find strong exchange bias shifts (up to 84 Oe) upon field cooling in metal-oxide (Fe/BaTiO{sub 3}) films combining FM and FE layers. The saturation magnetic moment of the FM layer is also significantly higher than in bulk (3.0 ± 0.2 μ{sub B}/atom) and the reversal mechanism occurs via a domain nucleation process. X-ray absorption spectroscopy at the Fe K-edge and Ba L3-edge indicate presence of few monolayers of antiferromagnetic FeO at the interface without the formation of any BaFeO{sub 3} layer. Polarized neutron reflectometry corroborates with our magnetization data as we perform depth profiling of the magnetic and structural densities in these bilayers. Our first principles density functional calculations support the formation of antiferromagnetic FeO layers at the interface along with an enhancement of Fe magnetic moments in the inner ferromagnetic layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A FirstPrinciple Study on the Magnetic Properties of Ag, Al, Li, Mg, and NaDoped ReS{sub 2} Monolayers

Magnetic properties of ReS{sub 2} monolayer doped with nonmagnetic metals (Ag, Al, Li, Mg, and Na) are studied by the first-principle method Different dopants and doping sites are considered. Similar to transition metal (TM) atoms, magnetic behavior appears in Al and Mg-doped systems. On the other hand, the calculated binding energies show that the Al-doped system has a more stable-formed system than the Mg-doped system. Hence, we study the ferromagnetic interaction in two Al-doped ReS{sub 2} monolayers. Interestingly, as the Al–Al distance increases, both ferromagnetic (FM) and nonmagnetic (NM) states are found. Our results deem that the FM coupling originates from a p-d exchange-like p-p coupling interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetoelectric coupling and spin-dependent tunneling in Fe/PbTiO{sub 3}/Fe multiferroic heterostructure with a Ni monolayer inserted at one interface

We report on first-principles calculations of a Ni monolayer inserted at one interface in the epitaxial Fe/PbTiO{sub 3}/Fe multiferroic heterostructure, focusing on the magnetoelectric coupling and the spin-dependent transport properties. The results of magnetoelectric coupling calculations reveal an attractive approach to realize cumulative magnetoelectric effects in the ferromagnetic/ferroelectric/ferromagnetic superlattices. The underlying physics is attributed to the combinations of several different magnetoelectric coupling mechanisms such as interface bonding, spin-dependent screening, and different types of magnetic interactions. We also demonstrate that inserting a Ni monolayer at one interface in the Fe/PbTiO{sub 3}/Fe multiferroic tunnel junction is an efficient method to produce considerable tunneling electroresistance effect by modifying the tunnel potential barrier and the interfacial electronic structure. Furthermore, coexistence of tunneling magnetoresistance and tunneling electroresistance leads to the emergence of four distinct resistance states, which can be served as a multistate-storage device. The complicated influencing factors including bulk properties of the ferromagnetic electrodes, decay rates of the evanescent states in the tunnel barrier, and the specific interfacial electronic structure provide us promising opportunities to design novel multiferroic tunnel junctions with excellent performances.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural, magnetic and electrical properties of ferromagnetic/ferroelectric multilayers

The La{sub 0.75}Sr{sub 0.25}MnO{sub 3} (LSMO)/Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} (BSTO) superlattices and bilayers, where LSMO is ferromagnetic and BSTO is ferroelectric, were grown by dc sputtering. X-ray diffraction indicates that the samples present a textured growth with the c axis perpendicular to the substrate. Magnetization measurements show a decrease of the sample's magnetization for decreasing ferromagnetic thickness. This effect could be related to the presence of biaxial strain and a magnetic dead layer in the samples. Conductive atomic force microscopy indicates that the samples present a total covering of the ferromagnetic layer for a ferroelectric thickness higher than four unit cells. Transport tunneling of the carriers seems to be the preferred conduction mechanism through the ferroelectric layer. These are promising results for the development of multiferroic tunnel junctions.

36 MATERIALS SCIENCE↗

Study of physical properties of integrated ferroelectric/ferromagnetic heterostructures

Superlattices (SLs) with different periodicity of ferromagnetic La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (LSMO) and ferroelectric Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} as constitutive layers were fabricated on conducting LaNiO{sub 3} coated (001) oriented MgO substrates using pulsed laser deposition. The crystallinity, ferroelectric, and magnetic properties of the SLs were studied over a wide range of temperatures and frequencies. The structure exhibited ferromagnetic behavior at 300 K and ferroelectric behavior over a range of temperatures between 100 and 300 K. A frequency-dependent change in dielectric constant and tangent loss were observed above the ferromagnetic-paramagnetic temperature. The frequency-dependent dielectric anomalies are attributed to the change in metallic and magnetic nature of LSMO and also the interfacial effect of two different phases that are connected alternatively in series. The effect of ferromagnetic LSMO layers on ferroelectric properties of the SLs indicated strong influence of the interfaces. The asymmetric behavior of ferroelectric loop and the capacitance-voltage relationship suggest development of a built field in the SLs due to high strain across the interfaces.

36 MATERIALS SCIENCE↗

Effect of H on the crystalline and magnetic structures of the YCo{sub 3}-H(D) system. I. YCo{sub 3} from neutron powder diffraction and first-principles calculations

This paper reports investigations into the influence of hydrogen on the magnetic properties of the YCo{sub 3}-H system. We report results on the magnetic structure and magnetic transitions of YCo{sub 3} using a combination of neutron powder diffraction measurements and first-principles full potential augmented plane wave + local orbital calculations under the generalized gradient approximation. The ferromagnetic and ferrimagnetic structures are examined on an equal footing. However, we identify that, no matter which structure is used as the starting point, the neutron diffraction data always refines down to the ferrimagnetic structure with the Co{sub 2} atoms having antiparallel spins. In the ab initio calculations, the inclusion of spin-orbit coupling is found to be important in the prediction of the correct magnetic ground state. Here, the results suggest that, for zero external field and sufficiently low temperatures, the spin arrangement of YCo{sub 3} is ferrimagnetic rather than ferromagnetic as previously believed. The fixed spin moment calculation technique has been employed to understand the two successive field-induced magnetic transitions observed in previous magnetization measurements under increasing ultrahigh magnetic fields. We find that the magnetic transitions start from the ferrimagnetic phase (0.61{mu}{sub B}/Co) and terminate with the ferromagnetic phase (1.16{mu}{sub B}/Co), while the spin on the Co{sub 2} atoms progressively changes from antiparallel ferrimagnetic to paramagnetic and then to ferromagnetic. Our neutron diffraction measurements, ab initio calculations, and the high field magnetization measurements are thus entirely self-consistent.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and magnetic properties of Y-doped La{sub 0.5}Sr{sub 0.5}MnO{sub 3} manganite system: Evidence of step-like magnetization

The magnetic and transport properties of bulk doped manganite, La{sub 0.5−y}Y{sub y}Sr{sub 0.5}MnO{sub 3} have been studied as a function of yttrium doping, y, for 0 ≤ y ≤ 0.25. In the absence of the yttrium this is a well studied half-doped manganite which is a metallic ferromagnet. The end members of this system (with y = 0 and 0.25) are found to be structurally different (rhombohedral and orthorhombic, respectively) due to the large distortions caused by the yttrium. These distortions make this series of compounds particularly interesting. The magnetization obtained in zero field cooled (ZFC) and field cooled (FC) studies show dramatic changes as the value of y is raised above 0.05. The magnetic behavior is further investigated by a study of the hysteresis loops, frequency dependent susceptibility and studies of the magnetic relaxation. The results are understood in terms of the average size of the cation on the A site, , and the variance, σ{sup 2} (= ∑y{sub i}{sup 2}r{sub i}{sup 2} - {sup 2}). The value of the variance, σ{sup 2}, increases rapidly with doping, y, induces melting of the long range ferromagnetic ordering, exhibiting a stepwise variation of magnetization (metamagnetic like). Based on the present results a magnetic phase diagram has been drawn demonstrating different magnetic phase sequences with the variation of σ{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface influenced magnetostructural transition in FeRh films

Surface structural effects accompanying the antiferromagnetic-ferromagnetic magnetostructral transition of epitaxial FeRh thin films were investigated by grazing incidence x-ray scattering. Measurement of the film lattice parameters and variation of x-ray incident angles allow observation of the transition character on scales ranging from a few nm to the total through-thickness of the film. Out-of-plane lattice measurements confirm that the ferromagnetic phase nucleates from the surface during the heating process and is retained at the surface below the transition temperature during the cooling process. These results suggest that surface strain relief fosters nucleation of the ferromagnetic phase.

36 MATERIALS SCIENCE↗