Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTROMAGNETIC FORM FACTORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

A bound on electromagnetic penetration through a slot aperture with backing cavity

This report examines bounds on the penetrant power through ports of entry into a conductive cavity. We first replace the cavity by a load and consider the maximum power transfer properties of an antenna or an aperture. We consider how limitations on the load quality factor place limits on received power. For general frequency ranges we model the backing region by means of a uniformly distributed matched load along a slot aperture and adjust its value for maximum power transfer. This result is derived in closed form using a transmission line model for the aperture. This result illustrates the reduction in received power for low frequencies with finitely conducting wall materials. At high frequencies it approaches the receiving cross section of a linear array having the slot length dimension. Next we examine a slot aperture in a conducting rectangular enclosure and determine how the cavity wall losses and resulting quality factor limit the penetrant power. Detailed simulations and experimental measurements are compared with each other and with the bounding results to assess the accuracy of the bounds. These comparisons also indicate limitations on the accuracy of the models due to perturbing influences in construction, such as bolted joints.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2014

Separated Response Function Ratios in Exclusive, Forward π ± Electroproduction

The study of exclusive π{sup ±} electroproduction on the nucleon, including separation of the various structure functions, is of interest for a number of reasons. The ratio R{sub L}=σ{sup π{sup -}}{sub L}/σ{sup π{sup +}}{sub L} is sensitive to isoscalar contamination to the dominant isovector pion exchange amplitude, which is the basis for the determination of the charged pion form factor from electroproduction data. A change in the value of R{sub T}=σ{sup π{sup -}}{sub T}/σ{sup π{sup +}}{sub T} from unity at small -t, to 1/4 at large -t, would suggest a transition from coupling to a (virtual) pion to coupling to individual quarks. Furthermore, the mentioned ratios may show an earlier approach to pQCD than the individual cross sections. We have performed the first complete separation of the four unpolarized electromagnetic structure functions above the dominant resonances in forward, exclusive π± electroproduction on the deuteron at central Q{sup 2} values of 0.6, 1.0, 1.6 GeV{sup 2} at W=1.95 GeV, and Q{sup 2}=2.45 GeV{sup 2} at W=2.22 GeV. Here, we present the L and T cross sections, with emphasis on R{sub L} and R{sub T}, and compare them with theoretical calculations. Results for the separated ratio RL indicate dominance of the pion-pole diagram at low -t, while results for R{sub T} are consistent with a transition between pion knockout and quark knockout mechanisms.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Large non-saturating Nernst thermopower and magnetoresistance in compensated semimetal ScSb

Today, high-performance thermoelectric and thermomagnetic materials operating in the low-temperature regime, particularly below the boiling point of liquid nitrogen remain scarce. Most thermomagnetic materials reported to date exhibit a strong Nernst signal along specific crystallographic directions in their single-crystal form. However, their performance typically degrades significantly in the polycrystalline form. Here, we report an improved Nernst thermopower of ~ 128 μV/K at 30 K and 14 T in polycrystalline compensated semimetal ScSb, in comparison to that was observed in single crystal ScSb previously. The magnetic field dependence of Nernst thermopower shows a linear and non-saturating behavior up to 14 T. The maximum Nernst power factor reaches to ~ 240 x 10 -4 W m −1 K −2 and Nernst figure of merit reaches to ~ 11 x 10 -4 K −1 . Polycrystalline ScSb also shows a large non-saturating magnetoresistance of ~ 940% at 2 K and 14 T. These enhanced properties originate from better electron–hole compensation, as revealed by Hall resistivity measurements. In conclusion, the cubic symmetry and absence of anisotropy in ScSb allow its polycrystalline form to achieve similar enhanced thermomagnetic and electromagnetic performance comparable to that of the single crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

A Fast-Response High-Accuracy Overvoltage Protection Circuit for Soft-Switching Current-Source Converters

Although voltage-source converters (VSCs) have been a focus of research for decades and are widely applied in numerous applications, they face great challenges in short-circuit failures, high dv/dt and electromagnetic interference (EMI), especially using wide bandgap devices. Instead, current-source converters (CSCs) are attracting increasing attention in recent years owing to their friendliness to short-circuit faults, improved EMI, etc. For CSCs, overvoltage is the most catastrophic failure since the semiconductor devices can hardly withstand an overvoltage for a short pulse. In this paper, a fast-response high-accuracy overvoltage protection (OVP) circuit is proposed to protect CSCs from overvoltage damage. It also features a small form factor, good noise-immunity, friendly retrofit capability, and no need for active switches. In this paper, the operating principle and design guideline of the proposed OVP circuit is introduced. Its effectiveness is validated in soft-switching solid-state transformer (S4T) at 500 V. In experiments, the voltage detection error of less than 5% and a propagation delay of fewer than 400 ns have been achieved.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2013

The study of excited nucleons and their structure

The nucleon excitation spectrum reflects properties of the quark-gluon system and their interaction. Quark models and Lattice QCD make predictions of masses and quantum numbers of the excited states and their internal structure according to radial, spin, and orbital transitions of the 3-quark and gluon system. Pion induced transitions revealed many nucleon states consistent with these predictions, but many predicted states have not been observed, especially at higher masses. The quest for a better understanding of the underlying symmetries and the internal structure of baryons has led to a worldwide effort to measure the nucleon excitation spectrum using electromagnetic induced processes. Jefferson Lab is playing a key role in this effort. Differential cross sections and polarization observables have been measured with unprecedented precision. Some of the data have been used in coupled-channel resonance analyses that led to new evidence for a number of excited states that were previously unobserved or lacked strong evidence. In this talk, I will discuss two directions of experimental research, the search for new nucleon states using meson photoproduction and the study of transitions form factors to understand their internal structure and the nature of excited states.

Burkert, Volker↗
DOE OSTI2011

Matrix elements of the electromagnetic operator between kaon and pion states

We compute the matrix elements of the electromagnetic operator sF{sub {mu}{nu}}{sigma}{sup {mu}{nu}}d between kaon and pion states, using lattice QCD with maximally twisted-mass fermions and two flavors of dynamical quarks (N{sub f}=2). The operator is renormalized nonperturbatively in the RI'/MOM scheme and our simulations cover pion masses as light as 270 MeV and three values of the lattice spacing from {approx_equal}0.07 up to {approx_equal}0.1 fm. At the physical point our result for the corresponding tensor form factor at zero-momentum transfer is f{sub T}{sup K{pi}}(0)=0.417(14{sub stat})(5{sub syst}), where the systematic error does not include the effect of quenching the strange and charm quarks. Our result differs significantly from the old quenched result f{sub T}{sup K{pi}}(0)=0.78(6) obtained by the SPQ{sub cd}R Collaboration with pion masses above 500 MeV. We investigate the source of this difference and conclude that it is mainly related to the chiral extrapolation. We also study the tensor charge of the pion and obtain the value f{sub T}{sup {pi}{pi}}(0)=0.195(8{sub stat})(6{sub syst}) in good agreement with, but more accurate than the result f{sub T}{sup {pi}{pi}}(0)=0.216(34) obtained by the QCDSF Collaboration using higher pion masses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Semileptonic form factors for $$B\rightarrow D^*\ell \nu $$ at nonzero recoil from $$2+1$$-flavor lattice QCD: Fermilab Lattice and MILC Collaborations

Abstract We present the first unquenched lattice-QCD calculation of the form factors for the decay $$B\rightarrow D^*\ell \nu $$ B → D ∗ ℓ ν at nonzero recoil. Our analysis includes 15 MILC ensembles with $$N_f=2+1$$ N f = 2 + 1 flavors of asqtad sea quarks, with a strange quark mass close to its physical mass. The lattice spacings range from $$a\approx 0.15$$ a ≈ 0.15 fm down to 0.045 fm, while the ratio between the light- and the strange-quark masses ranges from 0.05 to 0.4. The valence b and c quarks are treated using the Wilson-clover action with the Fermilab interpretation, whereas the light sector employs asqtad staggered fermions. We extrapolate our results to the physical point in the continuum limit using rooted staggered heavy-light meson chiral perturbation theory. Then we apply a model-independent parametrization to extend the form factors to the full kinematic range. With this parametrization we perform a joint lattice-QCD/experiment fit using several experimental datasets to determine the CKM matrix element $$|V_{cb}|$$ | V cb | . We obtain $$\left| V_{cb}\right| = (38.40 \pm 0.68_{\text {th}} \pm 0.34_{\text {exp}} \pm 0.18_{\text {EM}})\times 10^{-3}$$ V cb = ( 38.40 ± 0 . 68 th ± 0 . 34 exp ± 0 . 18 EM ) × 10 - 3 . The first error is theoretical, the second comes from experiment and the last one includes electromagnetic and electroweak uncertainties, with an overall $$\chi ^2\text {/dof} = 126/84$$ χ 2 /dof = 126 / 84 , which illustrates the tensions between the experimental data sets, and between theory and experiment. This result is in agreement with previous exclusive determinations, but the tension with the inclusive determination remains. Finally, we integrate the differential decay rate obtained solely from lattice data to predict $$R(D^*) = 0.265 \pm 0.013$$ R ( D ∗ ) = 0.265 ± 0.013 , which confirms the current tension between theory and experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Modeling Surface-Enhanced Raman Scattering of Au-Pyrazine and Au-Pyrazine-Au Nanorod Dimer Systems with the TD-DFTB Method

This study investigates Raman scattering from a pyrazine molecule adsorbed on gold nanorod surfaces using the time-dependent density functional tight-binding (TD-DFTB) method. We analyze surface enhanced Raman scattering (SERS) of the molecule for two configurations: one where the molecule is adsorbed on a single gold nanorod forming Au-pyrazine complex, and another where it forms a nano-junction Au-pyrazine-Au dimer system. These two configurations offer distinct chemical environments for the molecule and different local field enhancements, with the dimer systems generating enhanced hotspot regions at the junctions. We present results for nanojunction, Au-pyrazine-Au dimer structures, for variable nanogap sizes that lead to shift in the plasmon energy. The study identifies contributions to the SERS enhancements from chemical, electromagnetic, and resonance charge transfer mechanisms. Our results show that the chemical mechanism provides enhancement factors in the range of 10 2 –10 3 , while the electromagnetic enhancements are on the order of 10 3 –10 5 for monomer systems and 10 6 –10 8 for dimer structures. We present results for a nanorod with a length of 5.3 nm and a width of 0.52 nm, consisting of 121 gold atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Photon induced $K\Lambda $ production on the proton at $E_{\gamma} < 3$ GeV

The associated photoproduction of $K\Lambda$ from the proton for $E_{\gamma} < 3$ GeV is studied using an isobar model in which the non-resonant contributions corresponding to $s$, $t$, $u$ channel diagrams are obtained from a non-linear sigma model with chiral SU(3) symmetry. The model also predicts a contact term and its coupling strength in a natural way to preserve gauge symmetry. The parameters used are the pion decay constant $f_{\pi}$, vector and axial vector current couplings of the baryon octet in terms of the symmetric and antisymmetric couplings $D$ and $F$. In the non-resonant sector, the model is almost parameter free except a common cut-off parameter $\Lambda_{B}$, to describe the hadronic form factors at the strong kaon-nucleon-hyperon($KN\Lambda$) vertices. In the resonance sector, contribution from the various nucleon resonances($R$) in the $s$ channel, hyperon resonances($Y^{*}$) in the $u$ channel, and the kaon resonances($K^{*}$ and $K_{1}$) in the $t$ channel, which are present in the PDG having spin $\le \frac{3}{2}$ and mass $<2$ GeV with significant branching ratio in $K\Lambda$ decay mode have been considered. In the case of the nucleon resonances($R$), the couplings $\gamma NR$ at the electromagnetic vertices are determined in terms of the helicity amplitudes and the $RK\Lambda$ couplings at the strong vertices are determined by the partial decay width of the resonances($R$) decaying to $K\Lambda$. The strong and the electromagnetic couplings of $u$ and $t$ channel resonances are fitted to reproduce the experimental data of CLAS and SAPHIR. The numerical results are presented for the total and differential scattering cross sections and are compared with the available experimental data from CLAS and SAPHIR as well as with some of the recent theoretical models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1982

Image Processing

Images are prepared from data acquired by the multispectral scanner aboard Landsat, which views Earth in four ranges of the electromagnetic spectrum, two visible bands and two infrared. Scanner picks up radiation from ground objects and converts the radiation signatures to digital signals, which are relayed to Earth and recorded on tape. Each tape contains "pixels" or picture elements covering a ground area; computerized equipment processes the tapes and plots each pixel, line be line to produce the basic image. Image can be further processed to correct sensor errors, to heighten contrast for feature emphasis or to enhance the end product in other ways. Key factor in conversion of digital data to visual form is precision of processing equipment. Jet Propulsion Laboratory prepared a digital mosaic that was plotted and enhanced by Optronics International, Inc. by use of the company's C-4300 Colorwrite, a high precision, high speed system which manipulates and analyzes digital data and presents it in visual form on film. Optronics manufactures a complete family of image enhancement processing systems to meet all users' needs. Enhanced imagery is useful to geologists, hydrologists, land use planners, agricultural specialists geographers and others.

Source record↗
NASA NTRSDate not supplied

Evaluation of Near Singular Integrals for Computational Electromagnetics by Dimensionality Reduction

With the need for ever faster codes, a limiting factor that must be dealt with is the accurate yet efficient evaluation of interaction integrals between the more problematic near-field elements. Several recent works have together shown that all evaluations of source potential integrals and their derivatives for the most common bases and elements can be reduced to the evaluation of boundary line integrals; these can be evaluated by Gauss-Legendre quadrature, though integrand-smoothing transforms are often needed to accelerate their computation. In this paper, we modify the reported approach to eliminate cancellation errors in the line integral integrand, reinterpret the integral as a vertex function, and study the scalar potential integral form under the sinh transform and static subtraction acceleration methods.

D R Wilton↗
NASA NTRS2017

Unconventional Imaging with Contained Granular Media

Typically, the cost of a space-borne imaging system is driven by the size and mass of the primary aperture. The solution that we propose uses a method to construct an imaging system in space in which the nonlinear optical properties of a cloud of micron-sized particles, shaped into a specific surface by electromagnetic means, and allows one to form a very large and lightweight aperture of an optical system, hence reducing overall mass and cost. Recent work at JPL has investigated the feasibility of a granular imaging system, concluding that such a system could be built and controlled in orbit. We conducted experiments and simulation of the optical response of a granular lens. In all cases, the optical response, measured by the Modulation Transfer Function, of hexagonal reflectors was closely comparable to that of a conventional spherical mirror. We conducted some further analyses by evaluating the sensitivity to fill factor and grain shape, and found a marked sensitivity to fill factor but no sensitivity to grain shape. We have also found that at fill factors as low as 30%, the reflection from a granular lens is still excellent. Furthermore, we replaced the monolithic primary mirror in an existing integrated model of an optical system (WFIRST Coronagraph) with a granular lens, and found that the granular lens that can be useful for exoplanet detection provides excellent contrast levels. We will present our testbed and simulation results in this paper.

Sidick, Erkin↗
DOE OSTI2016

Effect of fast mold surface temperature evolution on iPP part morphology gradients

The control of mold surface temperature is an important factor that affects the sample surface morphology as well as the structural gradients (orientation crystal size, and type) as well as cooling stresses. The frozen layer thickness formed during the filling stage also has a very significant effect on the flow resistance and thus on the resulting pressure drop and flow length in thin wall parts. The possibility to have a hot mold during filling and a quick cooling soon afterward is a significant process enhancement particularly for specialized applications such as micro injection molding and for the reproduction of micro structured surfaces. Up to now, several methods (electromagnetic, infrared, hot vapor fleshing etc,) were tried to achieve fast temperature evolution of the mold. Unfortunately, all these methods require a complex balance between thermal and mechanical problems, equipment cost, energy consumption, safety, molding cycle time and part quality achievable. In this work, a thin electrical resistance was designed and used to generate a fast and confined temperature variation on mold surface (by joule effect). Since the whole temperature evolution can take place in a few seconds, one can couple the advantages of a high surface temperature during filling with the advantages of a low mold temperature, fast cooling and low heating dissipation. Some experiments were performed with a commercial iPP resin. The effects of the surface temperature and of the heating time (under constant electric power) on surface finishing and on the final morphology (thickness and structure of the different layers) are explored and discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1986

Voyager Saturnian ring measurements and the early history of the solar system

The mass distribution in the Saturnian ring system is investigated and compared with predictions from the plasma cosmogony. According to this theory, the matter in the rings has once been in the form of a magnetized plasma, in which the gravitation is balanced partly by the centrifugal force and partly by the electromagnetic forces. As the plasma is neutralized, the electromagnetic forces disappear and the matter can be shown to fall in to 2/3 of the original saturnocentric distance. This causes the so called 'cosmogonic shadow effect', which has been demonstrated earlier for the asteroidal belt and in the large scale structure of the Saturnian ring system. The relevance of the cosmogonic shadow effect is investigated for parts of the fine structures of the Saturnian ring system. It is shown that many structures of the present ring system can be understood as shadows and antishadows of cosmogonic origin. These appear in the form of double rings centered around a position a factor 0.64 (slightly less than 2/3) closer to Saturn than the causing feature. Voyager data agree with an accuracy better than 1 percent.

Alfven, H.↗
NASA NTRS1994

Natural orbital environment definition guidelines for use in aerospace vehicle development

This document provides definitions of the natural near-Earth space environment suitable for use in the initial development/design phase of any space vehicle. The natural environment includes the neutral atmosphere, plasma, charged particle radiation, electromagnetic radiation (EMR), meteoroids, orbital debris, magnetic field, physical and thermal constants, and gravitational field. Communications and other unmanned satellites operate in geosynchronous-Earth orbit (GEO); therefore, some data are given for GEO, but emphasis is on altitudes from 200 km to 1000 km (low-Earth orbit (LEO)). This document does not cover the induced environment of other effects resulting from presence of the space vehicle. Manmade factors are included as part of the ambient natural environment; i.e., orbital debris and radio frequency (RF) noise generated on Earth, because they are not caused by the presence of the space vehicle but form part of the ambient environment that the space vehicle experiences.

Anderson, B. Jeffrey↗
DOE OSTI2023

Electromagnetic Properties of Aluminum-based Bilayers for Kinetic Inductance Detectors

The complex conductivity of a superconducting thin film is related to the quasiparticle density, which depends on the physical temperature and can also be modified by external pair breaking with photons and phonons. This relationship forms the underlying operating principle of Kinetic Inductance Detectors (KIDs), where the detection threshold is governed by the superconducting energy gap. We investigate the electromagnetic properties of thin-film aluminum that is proximitized with either a normal metal layer of copper or a superconducting layer with a lower T-C, such as iridium, in order to extend the operating range of KIDs. Using the Usadel equations along with the Nam expressions for complex conductivity, we calculate the density of states and the complex conductivity of the resulting bilayers to understand the dependence of the pair breaking threshold, surface impedance, and intrinsic quality factor of superconducting bilayers on the relative film thicknesses. The calculations and analyses provide theoretical insights in designing aluminum-based bilayer kinetic inductance detectors for detection of microwave photons and athermal phonons at the frequencies well below the pair breaking threshold of a pure aluminum film.

complex conductivity↗
DOE OSTI2024

Observation of the decay J / ψ → e + e − η ( 1405 ) with η ( 1405 ) → π 0 f 0 ( 980 )

Using a data sample of ( 10087 ± 44 ) × 10 6 J / ψ events collected by the BESIII detector in 2009, 2012, 2018 and 2019, the electromagnetic Dalitz process J / ψ → e + e − η ( 1405 ) is observed via the decay η ( 1405 ) → π 0 f 0 ( 980 ) , f 0 ( 980 ) → π + π − , with a significance of about 9.8 σ . The branching fraction of this decay is measured to be B ( J / ψ → e + e − η ( 1405 ) → e + e − π 0 f 0 ( 980 ) → e + e − π 0 π + π − ) = ( 2.04 ± 0.20 ( stat ) ± 0.08 ( syst ) ) × 10 − 7 . The branching fraction ratio B ( J / ψ → e + e − η ( 1405 ) ) / B ( J / ψ → γ η ( 1405 ) ) is determined to be ( 1.36 ± 0.17 ( stat ) ± 0.06 ( syst ) ) × 10 − 2 . Furthermore, an e + e − invariant mass dependent transition form factor of J / ψ → e + e − η ( 1405 ) is presented for the first time. The obtained result provides input for different theoretical models and is valuable for the improved understanding the intrinsic structure of the η ( 1405 ) meson. Published by the American Physical Society 2024

Astronomy & Astrophysics↗