Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Downlink”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Remotely piloted research vehicle evaluation of advanced control system effects on spins

Special functions of an advanced control system were investigated for effects on spin entries and recoveries utilizing a 3/8-scale model of the F-15 airplane as a remotely piloted research vehicle (RPRV). Telemetry uplinks and downlinks were used with a ground-based digital computer to mechanize the RPRV control system for spin tests in flight. Results from the model RPRV flight tests and from a real time digital spin simulation were used to evaluate the F-15 stall inhibiter and an automatic spin recovery system developed for the RPRV model

Petersen, K. L.↗

Helios mission support

Deep Space Network support of the Helios mission is reported. Downlink signal degradation on the Helios-1 spacecraft and occultation of Helios-2 are discussed. Capability and performance of the network are assessed.

Goodwin, P. S.↗

A depolarization and attenuation experiment using the CTS satellite. Volume 1: Experiment description

An experiment for measuring precipitation attenuation and depolarization on the Communications Technology Satellite (CTS) 11.7 GHz downlink is described. Attenuation and depolarization of the signal received from the spacecraft is monitored on a 24 hour basis. Data is correlated with ground weather conditions. Theoretical models for millimeter wave propagation through rain are refined for maximum agreement with observed data. Techniques are developed for predicting and mimimizing the effects of rain scatter and depolarization on future satellite communication systems.

Bostian, C. W.↗

Accident investigation: Analysis of aircraft motions from ATC radar recordings

A technique was developed for deriving time histories of an aircraft's motion from air traffic control (ATC) radar records. This technique uses the radar range and azimuth data, along with the downlinked altitude data (from an onboard Mode-C transponder), to derive an expanded set of data which includes airspeed, lift, thrust-drag, attitude angles (pitch, roll, and heading), etc. This method of analyzing aircraft motions was evaluated through flight experiments which used the CV-990 research aircraft and recordings from both the enroute and terminal ATC radar systems. The results indicate that the values derived from the ATC radar records are for the most part in good agreement with the corresponding values obtained from airborne measurements. In an actual accident, this analysis of ATC radar records can complement the flight-data recorders, now onboard airliners, and provide a source of recorded information for other types of aircraft that are equipped with Mode-C transponders but not with onboard recorders.

Wingrove, R. C.↗

A comprehensive two-way Doppler noise model for near-real-time validation of Doppler data

Doppler noise generated within the tracking system is modeled as a function of the dominant variable-Doppler sample interval. Additionally, the relationship between media noise and Doppler samples interval is empirically determined, and the ratio of media noise for S- and X-band downlinks is solved for. These functional relationships are incorporated into the previous media noise modeling to obtain a comprehensive two-way Doppler noise model.

Berman, A. L.↗

NASA/ESA CV-990 Spacelab simulation. Appendixes: C, data-handling: Planning and implementation; D, communications; E, mission documentation

Data handling, communications, and documentation aspects of the ASSESS mission are described. Most experiments provided their own data handling equipment, although some used the airborne computer for backup, and one experiment required real-time computations. Communications facilities were set up to simulate those to be provided between Spacelab and the ground, including a downlink TV system. Mission documentation was kept to a minimum and proved sufficient. Examples are given of the basic documents of the mission.

Reller, J. O., Jr.↗

Proportionality between Doppler noise and integrated signal path electron density validated by differenced S-X range

Observations of Viking differenced S-band/X-band (S-X) range are shown to correlate strongly with Viking Doppler noise. A ratio of proportionality between downlink S-band plasma-induced range error and two-way Doppler noise is calculated. A new parameter (similar to the parameter epsilon which defines the ratio of local electron density fluctuations to mean electron density) is defined as a function of observed data sample interval (Tau) where the time-scale of the observations is 15 Tau. This parameter is interpreted to yield the ratio of net observed phase (or electron density) fluctuations to integrated electron density (in RMS meters/meter). Using this parameter and the thin phase-changing screen approximation, a value for the scale size L is calculated. To be consistent with Doppler noise observations, it is seen necessary for L to be proportional to closest approach distance a, and a strong function of the observed data sample interval, and hence the time-scale of the observations.

Berman, A. L.↗

A model of SNR degradation during solar conjunction

The downlink signal from spacecraft in solar conjunction phases suffers a drastic reduction in signal-to-noise ratio (SNR). Responsible in large part for this effect is the increase in system noise temperature (SNT) in the ground antenna-receiver system. An empirical model is presented of SNR degradation due to increasing SNT during solar conjunction phases.

Rockwell, S. T.↗

Severe storms observing satellite study

Payload distribution and the attitude control system for the multi-mission modular spacecraft/StormSat configuration are discussed. The design of the advanced atmospheric sounder and imaging radiometer (AASIR) gimbal drive and its servomechanism is described. Onboard data handling, data downlink communications, and ground data handling systems are developed. Additional topics covered include: magnetic unloading at synchronous altitude, north-south stationkeeping, and the feasibility and impact of flying the microwave atmospheric sounding radiometer (MASR) as an additional payload.

Iwens, R. P.↗

OSU participation in the CTS communications link characterization experiment

A four element self phased array was developed for propagation measurements utilizing the Communication Technology Satellite 11.7 GHz downlink. The parameters of interest in measurements were attenuation, amplitude scintillation, and angle of arrival variability. Simultaneous scintillation measurements were also conducted at 360 MHz, 2.075 GHz, and 30 GHz utilizing ATS-6. The unique movement of ATS-6 during 1976 permitted extensive measurement of scintillation characteristics as a function of path elevation angle.

Hodge, D. B.↗

The Pioneer 11 radio occultation measurements of the Jovian ionosphere

Radio occultation data obtained with the Pioneer 11 spacecraft are utilized to study Jupiter's ionosphere. The ingress measurements, which were conducted by using a stable earth-based frequency reference for the tracking link, yielded ionospheric data near the morning terminator at about 79 deg south latitude. Data were also taken during egress on the evening side near 20 deg north latitude. The latter measurements were conducted in the one-way mode; i.e., an on-board crystal oscillator was employed as a frequency reference for the downlink (spacecraft-to-earth) signal. These data confirm previous results obtained with Pioneer 10 and show that Jupiter has a multilayered ionosphere extending over an altitude range of more than 3000 km. The topside scale height near 79 deg south latitude was 540 + or - 60 km. Assuming a topside electron, H(+) distribution controlled by diffusion yields a plasma temperature of 850 + or - 100 K in this region. The radio data indicate that the upper atmosphere is either warmer or more dissociated into atomic hydrogen than previously anticipated.

Fjeldbo, G.↗

Digital speech processing for the Space Shuttle program

This paper describes the voice digitization technique which has been selected for the Space Shuttle program. The selected approach is compatible with a time-division multiplexing scheme which combines one or two digital voice channels with commands prior to transmission over an RF uplink or with telemetry prior to transmission over an RF downlink.

Batson, B. H.↗

Characterization of the CTS 12 and 14 GHz communications links - Preliminary measurements and evaluation

The Communications Link Characterization Experiment is designed to characterize the radio frequency links of the Communications Technology Satellite. The experiment is twofold: (1) it will study the natural characteristics in the CTS frequency bands (14 GHz uplink, and 12 GHz downlink) including attenuation and signal degradation due primarily to absorption and scattering induced by precipitation, and (2) it will perform environmental measurements for the characterization of man-made, earth-based signals which could interfere with the uplink frequency bands of the satellite.

Ippolito, L. J.↗

Strategic considerations in SETI, and a microwave approach

Plausible options in the search for extraterrestrial intelligence (SETI), and the need to reserve a suitable portion of the EM (microwave) spectrum for SETI research, are discussed. Reasons for selection of a portion of the spectrum, specifically the 'water hole' near 1.5 GHz in the terrestrial microwave window (1-25 GHz), are presented, and competition with various emitters for that band (existing satellite downlink transmissions) is discussed. SETI search policies and options are summarized in a table. Speculative considerations guiding initial phases of the SETI pursuit are discussed.

Seeger, C. L.↗

Life sciences Spacelab Mission Development test 3 (SMD 3) data management report

Development of a permanent data system for SMD tests was studied that would simulate all elements of the shuttle onboard, telemetry, and ground data systems that are involved with spacelab operations. The onboard data system (ODS) and the ground data system (GDS) were utilized. The air-to-ground link was simulated by a hardwired computer-to-computer interface. A patch board system was used on board to select experiment inputs, and the downlink configuration from the ODS was changed by a crew keyboard entry to support each experiment. The ODS provided a CRT display of experiment parameters to enable the crew to monitor experiment performance. An onboard analog system, with recording capability, was installed to handle high rate data and to provide a backup to the digital system. The GDS accomplished engineering unit conversion and limit sensing, and provided realtime parameter display on CRT's in the science monitoring area and the test control area.

Moseley, E. C.↗

Helios mission support

Deep Space Network coverage of Helios-1 and Helios-2 from Feb. 1 through Apr. 15, 1977 is presented in tabular form. Mark III data system (MDS) performance and station modifications for MDS configuration are discussed. Cross support for Helios operations by DSN and STDN is described and their downlink performances compared.

Goodwin, P. S.↗