Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Doppler Wind Lidars”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Case study of a bore wind-ramp event from lidar measurements and HRRR simulations over ARM Southern Great Plains

The rapid change of wind speed and direction on 21 August 2017 is studied using Doppler lidar measurements at five sites of the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) facility in north-central Oklahoma. The Doppler lidar data were investigated along with meteorological variables such as temperature, humidity, and turbulence available from the large suite of instrumentation deployed at the SGP Central Facility (C1) during the Land-Atmosphere Feedback Experiment in August 2017. Lidar measurements at five sites, separated by 55-70 km, allowed us to document the development and evolution of the wind flow over the SGP area, examine synoptic conditions to understand the mechanism that leads to the ramp event, and estimate the ability of the High-Resolution Rapid Refresh model to reproduce this event. The flow feature in question is an atmospheric bore, a small-scale phenomenon that is challenging to represent in models, that was generated by a thunderstorm outflow northwest of the ARM SGP area. The small-scale nature of bores, its impact on power generation, and the modeling challenges associated with representing bores are discussed in this paper. In conclusion, the results also provide information about model errors between sites of different surface and vegetation types.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1996

High Resolution Doppler Lidar

This Grant supported the development of an incoherent lidar system to measure winds and aerosols in the lower atmosphere. During this period the following activities occurred: (1) an active feedback system was developed to improve the laser frequency stability; (2) a detailed forward model of the instrument was developed to take into account many subtle effects, such as detector non-linearity; (3) a non-linear least squares inversion method was developed to recover the Doppler shift and aerosol backscatter without requiring assumptions about the molecular component of the signal; (4) a study was done of the effects of systematic errors due to multiple etalon misalignment. It was discovered that even for small offsets and high aerosol loadings, the wind determination can be biased by as much as 1 m/s. The forward model and inversion process were modified to account for this effect; and (5) the lidar measurements were validated using rawinsonde balloon measurements. The measurements were found to be in agreement within 1-2 m/s.

Source record↗
DOE OSTI2020

The Cloud-resolving model Radar SIMulator (CR-SIM) Version 3.3: description and applications of a virtual observatory

Ground-based observatories use multi-sensor observations to characterize cloud and precipitation properties. One of the challenges is how to design strategies to best use these observations to understand these properties and evaluate weather and climate models. This paper introduces the Cloud resolving model Radar SIMulator (CR-SIM), which uses output from high-resolution cloud resolving models (CRMs) to emulate multi-wavelength, zenith-pointing, and scanning radar observables and multi-sensor (radar and lidar) products. CR-SIM allows direct comparison between an atmospheric model simulation and remote-sensing products using a forward-modeling framework consistent with the microphysical assumptions used in the atmospheric model. CR-SIM has the flexibility to easily incorporate additional microphysical modules, such as microphysical schemes and scattering calculations, and expand the applications to simulate multi-sensor retrieval products. In this paper, we present several applications of CR-SIM for evaluating the representativeness of cloud microphysics and dynamics in a CRM, quantifying uncertainties in radar-lidar integrated cloud products and multi-Doppler wind retrievals, and optimizing radar sampling strategy using observing system simulation experiments. These applications demonstrate the application of CR-SIM as a virtual observatory operator on high-resolution model output for a consistent comparison between model results and observations to aid interpretation of the differences and improve understanding of the representativeness errors due to the sampling limitations of the ground-based measurements. CR-SIM is licensed under the GNU GPL package and both the software and the user guide are publicly available to the scientific community.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1980

An airborne Doppler Lidar

A pulsed CO2 Doppler Lidar, developed for airborne measurements of atmospheric wind fields, is described. In-flight tests show that the device can be successfully utilized in the detection and measurement of mountain-wave turbulence and wind shear, and in the generation of time histories of wind-field variations in smooth flight. This Lidar is in the process of being configured for measurement of the atmospheric flow fields surrounding severe convective storms.

Dimarzio, C. A.↗
NASA NTRS1990

Space-based Doppler lidar sampling strategies: Algorithm development and simulated observation experiments

Lidar Atmospheric Wind Sounder (LAWS) Simulation Models (LSM) were developed to evaluate the potential impact of global wind observations on the basic understanding of the Earth's atmosphere and on the predictive skills of current forecast models (GCM and regional scale). Fully integrated top to bottom LAWS Simulation Models for global and regional scale simulations were developed. The algorithm development incorporated the effects of aerosols, water vapor, clouds, terrain, and atmospheric turbulence into the models. Other additions include a new satellite orbiter, signal processor, line of sight uncertainty model, new Multi-Paired Algorithm and wind error analysis code. An atmospheric wind field library containing control fields, meteorological fields, phenomena fields, and new European Center for Medium Range Weather Forecasting (ECMWF) data was also added. The LSM was used to address some key LAWS issues and trades such as accuracy and interpretation of LAWS information, data density, signal strength, cloud obscuration, and temporal data resolution.

Emmitt, G. D.↗
NASA NTRS1988

Use of the Terminal Area Simulation System (TASS) to study microburst wind shears

Ground-based and airborne Doppler radar and LIDAR systems are being designed to alert pilots when a hazardous windshear is present. A key element in this design effort is understanding the microburst itself. This is accomplished by means of the TASS model which was developed for NASA by Proctor (1987a,b). The time-dependent TASS model has two vesions: a two-demensional high resolution axisymmetric model, and a three-demensional model. The model includes a sophisticated parameterization of cloud microphysics and a friction layer, both of which are essential to a realistic simulation of the microburst phenomenon. The TASS model has been successfully tested on well-observed convective events.

Byrd, Gregory P.↗
DOE OSTI2026

Wind lidar operations and observations from Tundra Pigeon

Lawrence Livermore National Laboratory brought a ZX-300 profiling lidar to the Tundra Pigeon experiment for the purpose of collecting wind measurements in the lower atmospheric boundary layer. The ZX-300 lidar is a portable Doppler lidar which uses light to track naturally occurring aerosols across a measurement cone, thereby deriving wind speed (horizontal and vertical) and wind direction. The ZX-300 is programable between the heights of 10 m and 300 m above ground level and additionally has a 1 m onboard meteorological sensor for collecting measurements of air temperature, relative humidity, air pressure and wind at 1 m height. We programmed the ZX-300 to target altitudes of most interest to the tracer experiment. These heights were 10, 15, 20, 30, 38, 50, 75, 100, 125, 150 and 200 m. Note that the 38 m level is a fixed calibration height and cannot be changed. This measurement strategy prioritized winds close to the surface while ensuring that we’d also collect information about the winds aloft. The wind measurements are collected directly over the lidar instrument and represent a vertical profile of the winds over that location. However, given that there were minimal terrain and vegetation differences in the area, we’d expect these wind conditions to be representative of a larger volume area, discussed in more detail below.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1992

Coherent summation of spatially distorted Doppler lidar signals using a two-dimensional heterodyne detector array

We have investigated the improvement in the signal-to-noise ratio for a coherent Doppler lidar through the use of a multi-element heterodyne detector array. Such an array enables the spatial summation of atmospheric refractive turbulence induced speckles, and time varying target speckles. Our recent experiments have shown that the non-coherent summation of the lidar signals from a heterodyne detector array can enhance the heterodyne mixing efficiency and thus the signal-to-noise ratio. In this paper, we expand this work to include the coherent summation of array signals. The digitized heterodyne signals were stored in a personal computer. Fast Fourier transforms were performed on both the non-coherent and coherent summations of the detector array signals. It was found that the coherent summation greatly enhanced the accuracy in the Doppler frequency estimate. A theoretical analysis was performed and indicated good agreement with experimental results. We have also applied these results to the more general lidar applications including atmospheric wind sensing, and have found that in most lidar applications the Doppler frequency estimate is increased through the use of the heterodyne detector array.

Chan, Kin Pui↗
NASA NTRS1992

Ground-based Doppler lidar of increased laser instability: Conception and design

Pulsed CO2 Doppler lidars are effective tools for ground-based atmospheric wind sensing, but the high cost of the lidar transceivers, mainly due to the required high frequency stability (better than 10(exp -9) or 100 KHz), prevents their wide use in meteorology. The best approach to overcome this problem is to develop Doppler lidars that are effective at increased laser instability. This work is based on the results of a new scheme for Doppler lidar detection by the use of frequency synthesis, in a wide fluctuation bandwidth of laser instabilities, is described. A ground-based system, using this approach, is under development in the Institute of Electronics - Bulgarian Academy of Science (BAS).

Stoyanov, D. V.↗
DOE OSTI2022

Evaluation of coupled wind-wave model simulations of offshore winds in the Mid-Atlantic Bight using lidar-equipped buoys.

From 2014 to 2017, two Department of Energy buoys equipped with Doppler lidar were deployed off the U.S. East Coast to provide long term measurements of hub-height wind speed in the marine environment. In this study, we performed simulations of selected cases from the deployment using a 5-km configuration of the Weather Research and Forecasting (WRF) model, to see if simulated hub height speeds could produce closer agreement with the observations than existing reanalysis products. For each case we performed two additional simulations: one in which marine surface roughness height was one-way coupled to forecast wave parameters from a standalone WaveWatch III (WW3) simulation, and another in which WRF and WW3 were two-way coupled using the Coupled-Ocean-Atmosphere-Wave-Sediment-Transport (COAWST) framework. It was found that all the 5-km WRF simulations improved 90-m wind speed statistics for the tropical cyclone case of 08 May 2015 and the cold frontal case of 25 Mar 2016, but not the nor-easter of 18 Jan 2016. The impact of wave coupling on buoy-level (4 m) wind speed was modest and case dependent, but when present, the impact was typically seen at 90 m as well, being as large as 10% in stable conditions. One-way wave coupling consistently reduced wind speeds, improving biases for 25 Mar 2016 but worsening them for 08 May 2015. Two-way wave coupling mitigated these negative biases, improved wave field representation and statistics, and mostly improved 4-m wind field correlation coefficients, at least at the VA buoy, largely due to greater self-consistency between wind and wave fields.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1988

Wind measurements by electromagnetic probes

The emerging technology of electromagnetic probing of the atmosphere to measure winds used in a space vehicle ascent winds load calculations is presented. The frequency range, altitude, and resolution for the following probes are presented: lidars, microwave radars, and clear-air Doppler radars (popularly known as wind profilers). The electromagnetic probing of the atmosphere by clear-air radars and lasers is the new technology to supplement balloon-borne wind sensors used to determine ascent wind loads of space vehicles. The electromagnetic probes measure the wind velocity using the Doppler effect. This is the radar technology used in MSFC's Radar Wind Profiler, and is similar to the technology used in conventional Doppler systems except that the frequency is generally lower, antenna is bigger, and dwell time much longer. Designed for unattended and automated instrumentation in providing measurements of the wind in the troposphere, the profiler employs Doppler radar technology and is currently being put in operation at NASA Kennedy Space Center, Florida.

Susko, Michael↗
NASA NTRS1992

Pulsed laser spectral measurement using a Fabry-Perot interferometer: Limits to resolution

We are developing a Doppler lidar system using the edge technique to measure atmospheric wind profiles. The edge technique requires a laser with a narrow spectral bandwidth and a high resolution optical filter. The lidar system will use a Nd:YAG laser operating at 1.064 microns and a high resolution Fabry-Perot interferometer for the edge filter. The Doppler shift measurement is made by locating the laser on the edge of the filter's spectral response function. Due to the steep slope on the edge, large changes in the filter transmission will be observed for small changes in frequency. The Doppler shift can be determined from a measurement of this change in filter transmission if the filter spectral response function in the region of the measurement is well known. Recently developed injection seeded solid state lasers have made near transform limited laser output readily available for lidar work. Injection-seeded Nd:YAG laser exhibit single mode output with smooth Gaussian temporal pulse shapes. Results of an experiment we conducted to evaluate the effects of a short Gaussian temporal input pulse on the spectral response of a high resolution Fabry-Perot interferometer are presented.

Notari, Anthony↗