Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffusion problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

The iterative thermal emission method: A more implicit modification of IMC

For over 40 years, the Implicit Monte Carlo (IMC) method has been used to solve challenging problems in thermal radiative transfer. These problems typically contain regions that are optically thick and diffusive, as a consequence of the high degree of “pseudo-scattering” introduced to model the absorption and reemission of photons from a tightly-coupled, radiating material. IMC has several well-known features that could be improved: a) it can be prohibitively computationally expensive, b) it introduces statistical noise into the material and radiation temperatures, which may be problematic in multiphysics simulations, and c) under certain conditions, solutions can be nonphysical, in that they violate a maximum principle, where IMC-calculated temperatures can be greater than the maximum temperature used to drive the problem. We have developed a variant of IMC called iterative thermal emission IMC, which is designed to have a reduced parameter space in which the maximum principle is violated. ITE IMC is a more implicit version of IMC in that it uses the information obtained from a series of IMC photon histories to improve the estimate for the end of time step material temperature during a time step. A better estimate of the end of time step material temperature allows for a more implicit estimate of other temperature-dependent quantities: opacity, heat capacity, Fleck factor (probability that a photon absorbed during a time step is not reemitted) and the Planckian emission source. We have verified the ITE IMC method against 0-D and 1-D analytic solutions and problems from the literature. These results are compared with traditional IMC. We perform an infinite medium stability analysis of ITE IMC and show that it is slightly more numerically stable than traditional IMC. We find that significantly larger time steps can be used with ITE IMC without violating the maximum principle, especially in problems with non-linear material properties. The ITE IMC method does however yield solutions with larger variance because each sub-step uses a different Fleck factor (even at equilibrium)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Monte Carlo N-Particle Tracking of Ultrafine Particle Flow in Bent Micro-Tubes

The problem of large pressure-differential driven laminar convective-diffusive ultrafine aerosol flow through bent micro-tubes is of interest in several contemporary research areas including; release of contents from pressurized containment vessels, aerosol sampling equipment, advanced scientific instruments, gas-phase micro-heat exchangers, and microfluidic devices. In each of these areas, the predominant problem is the determination of the fraction of particles entering the micro-tube that is deposited within the tube and the fraction that is transmitted through. Due to the extensive parameter restrictions of this class of problems, a Lagrangian particle tracking method making use of the coupling of the analytical stream line solutions of Dean and the simplified Langevin equation is quite a useful tool in problem characterization. This method is a direct analog to the Monte Carlo N-Particle method of particle transport extensively used in nuclear physics and engineering. In this work, 10 nm diameter particles with a density of 1 g/cm3 are tracked within micro-tubes with toroidal bends with pressure differentials ranging between 0.2175 and 0.87 atmospheres. The tubes have radii of 25 microns and 50 microns and the radius of curvature is between 1 m and 0.3183 cm. The carrier gas is helium, and temperatures of 298 K and 558 K are considered. Numerical convergence is considered as a function of time step size and of the number of particles per simulation. Particle transmission rates and deposition patterns within the bent micro-tubes are calculated.

Casella, Andrew M.↗
DOE OSTI2016

A FLEXIBLE NONLINEAR DIFFUSION ACCELERATION METHOD FOR THE FIRST ORDER EIGENVALUE SN EQUATIONS DISCRETIZED WITH DISCONTINUOUS FEM

This work describes a Nonlinear Diffusion Acceleration (NDA) method for the first order SN equations that discretizes both the transport equation and the associated diffusion system using discontinuous finite elements; the diffusion system is solved on a potentially coarser mesh and with a coarser energy group structure than the SN equations. The developed method differs from current methods by allowing the SN and diffusion system to be discretized with arbitrary FEM bases and by using an additive update of the SN system. The benefit of this capability is extension of the stability region to optically thicker mesh cells and stability without the necessity to underrelax the iterative algorithm. The presented method introduces the notion of consistency of the SN and diffusion solutions and derives suitable definitions of the cross sections, drift vectors, and element face closures. The NDA equations are solved using a Picard iteration scheme. Numerical results are presented for the C5G7 benchmark problem highlighting the effectiveness of the methods when deployed with the diffusion system discretized on the same mesh as the SN system. Additional results are presented for cases where the diffusion system features a coarser mesh, coarser energy group structure, or both, demonstrating its stability and effectiveness in these cases. It is observed that the effectiveness of the NDA method reduces when reducing the resolution of the associated diffusion system.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Applying Legendre wavelet method with Tikhonov regularization for one-dimensional time-fractional diffusion equations

In this paper, a new method based on two-dimensional Legendre wavelet basis is proposed to solve time-fractional diffusion equations. This technique is used to convert the problem into a system of linear algebraic equations via expanding the required approximation based on the Legendre wavelet basis. The effectiveness of the proposed method is examined by comparing the numerical results with other methods. When the desired system is large, it is ill-conditioned; in this case, Tikhonov regularization method, with discrepancy principle for finding the regularization parameter, is applied to stabilize the solution.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2016

Finite Volume Method Based Neutronic Solvers for Steady and Transient Analysis of Molten Salt Reactors

In recent years, the coupled neutronics and thermal hydraulics analysis becomes more and more important, because it helps to identify the most relevant safety issues without conservative assumptions. In addition, such coupled simulations are essential for the generation IV advanced nuclear power systems such as molten salt reactor (MSR), because the presence of strong coupling between different phenomena, like the transport of delayed neutron precursors by the fluid flow?. Due to the different discretization methods used in reactor physics analysis and thermal-hydraulics analysis, it is hard to couple different kinds of codes. This work presents an attempt to solve the multigroup neutron diffusion equation with the finite volume method which is quite widely used for the numerical simulation of a variety of applications involving fluid flow and heat and mass transfer. The unstructured finite volume method (FVM) based on open source C++ library OpenFOAM was chosen as the development platform?. The objective of this paper is to concisely present the main features of the developed codes in terms of the theoretical background and numerical approach and as can be seen in the following sections, the calculation results obtained by the NDSFoam which solves the steady-state neutron diffusion equation and NDTFoam which solves the transient-state neutron diffusion equation are discussed and compared to the benchmark problems. In this paper, two new neutronic solvers using finite volume method have been developed to perform the neutron physics analysis. The solvers are based on OpenFOAM, and have been tested with several steady state and transient-state benchmark problems. By verifications of the codes, it is proved that the development of NDSFoam and NDTFoam are correct. In our future work, both of these two solvers will be coupled with the precompiled CFD solvers in OpenFOAM to analyze the molten salt fast reactors. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

NRC Multiphysics Analysis Capability Deployment FY21: Part 3

This report details the progress and activities of Idaho National Laboratory (INL) on the Nuclear Regulatory Commission (NRC) project “Development and Modeling Support for Advanced Non-Light Water Reactors.” The deliverables completed for this report are: Deliverable 1c: the capability to model gas mixtures was added to Pronghorn. A test problem mimicking the conditions achieved in a depressurized loss of forced cooling (DLOFC) event was solved with both RELAP-5 and Pronghorn. Pronghorn employed a finite vol ume method with the Kurganov-Tadmor discretization. The comparison between the mass fraction spatial profiles computed with RELAP-5 and Pronghorn clearly shows the presence of numerical artifacts (i.e., overly diffusive behavior at low Mach numbers). We confirmed that the problem disappears at higher Mach numbers. We recommend future work on the implementation of a low Mach finite volume formulation to better treat low Mach number problems. Deliverable 2a: we demonstrated two approaches to model the radiation/conduction/natural convection heat transfer across a stagnant gas for the PBMR-400 design using Pronghorn. The first approach is based on the net radiation method, which relies on the computation of view factors with the Multiphysics Object-Oriented Simulation Environment (MOOSE) ray tracing capability. The second method is a traditional thermal resistance approach. The test problems include both 2D and 3D geometries. In all cases, the results show very good agreement during a DLOFC transient. This confirms that the faster thermal resistance method produces solutions that are equivalent to the net radiation method for this geometry. Deliverable 3d: we demonstrated the use of the advection kernel for the delayed neutron precursor equation in Griffin with a 2D MSFR model. The results appear physical but further verification is recommended. We also recommend the addition of conjugate heat transfer to compute the temperatures and model the thermomechanic behavior of the reflectors and other structures. Significant memory and performance issues were encountered in the 3D axisymmetric model. Future work is recommended in this area. Task 8g: this task allows multidimensional MOOSE applications to be coupled to system codes (RELAP-7 and SAM). We implemented a faster multiphysics iteration coupling algorithm, which provides an overall 6× acceleration of the 3D-1D coupling of the core multidi- mensional fluid flow solver and the 1D primary and secondary loop model.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Preserving Tracer Correlations in Moment-Based Atmospheric Transport Models

A linear non-diffusive algorithm for advective transport is developed that greatly improves the detail at which aerosols and clouds can be represented in atmospheric models. Linear advection schemes preserve tracer correlations but the most basic linear scheme is rarely used by atmospheric modelers on account of its excessive numerical diffusion. Higher-order schemes are in widespread use, but these present new problems as nonlinear adjustments are required to avoid occurrences of negative concentrations, spurious oscillations, and other non-physical effects. Generally successful at reducing numerical diffusion during the advection of individual tracers, for example, particle number or mass, the higher-order schemes fail to preserve even the simplest of correlations between interrelated tracers. As a result, important attributes of aerosol and cloud populations including radial moments of particle size distributions, molecular precursors related through chemical equilibria, aerosol mixing state, and distribution of cloud phase are poorly represented. We introduce a new transport scheme, minVAR, that is both non-diffusive and preservative of tracer correlations, thereby combining the best features of the basic and higher-order schemes while enabling new features such as the tracking of sub-grid information at arbitrarily fine scales with high computational efficiency.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

High-Level Synthesis of Irregular Applications: A Case Study on Influence Maximization

The Influence Maximization problem is the problem of identifying a small cohort of actors from a broader population that, when initially activated in a diffusion process, are expected to result in a large number of activations in the population. While the problem is known to be NP-hard, several approximation algorithms have been devised by leveraging its submodular structure. While these algorithms are theoretically efficient, they are computationally very expensive in practice. This work advances the current state-of-the-art parallelization scheme for the IMM algorithm by devising the adoption of custom hardware accelerators implemented on FPGAs by leveraging High Level Synthesis from OpenCL. We study the performance of our proposed approach by exploring optimizations tailored at improving the parallel efficiency of the accelerators and highlight their effects and limitations in accelerating complex graph analytic applications. Our experimental evaluation shows that FPGA acceleration can improve the performance of the LT diffusion model up to 1.72x for the entire application and up to 2.90x for its most important kernel with respect to a CPU only parallel execution. The FPGA acceleration of the LT model shows also a 1.54x reduction in energy consumption when compared to a parallel CPU only run.

Neff, Reece W.↗
DOE OSTI2015

Spatial Resolution Versus Data Acquisition Efficiency in Mapping an Inhomogeneous System with Species Diffusion

Traditionally, spatially-resolved photoluminescence (PL) has been performed using a point-by-point scan mode with both excitation and detection occurring at the same spatial location. But with the availability of high quality detector arrays like CCDs, an imaging mode has become popular for performing spatially-resolved PL. By illuminating the entire area of interest and collecting the data simultaneously from all spatial locations, the measurement efficiency can be greatly improved. However, this new approach has proceeded under the implicit assumption of comparable spatial resolution. We show here that when carrier diffusion is present, the spatial resolution can actually differ substantially between the two modes, with the less efficient scan mode being far superior. We apply both techniques in investigation of defects in a GaAs epilayer – where isolated singlet and doublet dislocations can be identified. A superposition principle is developed for solving the diffusion equation to extract the intrinsic carrier diffusion length, which can be applied to a system with arbitrarily distributed defects. The understanding derived from this work is significant for a broad range of problems in physics and beyond (for instance biology) – whenever the dynamics of generation, diffusion, and annihilation of species can be probed with either measurement mode.

14 SOLAR ENERGY↗
DOE OSTI2015

Pitch-angle diffusion of electrons through growing and propagating along a magnetic field electromagnetic wave in Earth's radiation belts

The diffusion of electrons via a linearly polarized, growing electromagnetic (EM) wave propagating along a uniform magnetic field is investigated. The diffusion of electrons that interact with the growing EM wave is investigated through the autocorrelation function of the parallel electron acceleration in several tens of electron gyration timescales, which is a relatively short time compared with the bounce time of electrons between two mirror points in Earth's radiation belts. Furthermore, the pitch-angle diffusion coefficient is derived for the resonant and non-resonant electrons, and the effect of the wave growth on the electron diffusion is discussed. The results can be applied to other problems related to local acceleration or the heating of electrons in space plasmas, such as in the radiation belts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Solid 3D Li–S Battery Design via Stacking 2D Conductive Microporous Coordination Polymers and Amorphous Li–S Layers

To make a lithium-sulfur (Li-S) battery practical, not only high gravimetric energy capacity is important, but also high volumetric energy capacity will be required. The currently explored Li-S cathode designs often deploy systems with liquid electrolyte infiltration, hence with relatively low volumetric capacity. In the current study, we theoretically test a compact solid three-dimensional (3D) design (more like a Li-ion battery cathode than a conventional Li-S cathode) consisted of a sandwich structure alternating between the two-dimensional (2D) Mn-hexaaminobenzene-based coordination polymer (2D Mn-HAB-CP) layer and the amorphous Li-S layer. We study the theoretical limits for both its gravimetric and volumetric energy capacity, as well as its structural stability and Li diffusion within the cathode system. To study the Li diffusion within an amorphous system, we also develop a pull-atom molecular dynamics (PA-MD) to calculate the barrier heights of such disordered systems. We reveal the mechanism that determines the Li diffusion in the amorphous layer of the system. Overall, we find such a 3D solid Li-S cathode can be practical, with sufficient large gravimetric and volumetric energy capacity, as well as the Li diffusion constant. It also solves many other common Li-S cathode problems, from Li polysulfide dissolution to electrical insulating, and structure instabilities.

25 ENERGY STORAGE↗
DOE OSTI2023

Reinforcement Learning-Guided Long-Timescale Simulation of Hydrogen Transport in Metals

Diffusion in alloys is an important class of atomic processes. However, atomistic simulations of diffusion in chemically complex solids are confronted with the timescale problem: the accessible simulation time is usually far shorter than that of experimental interest. In this work, long-timescale simulation methods are developed using reinforcement learning (RL) that extends simulation capability to match the duration of experimental interest. Two special limits, RL transition kinetics simulator (TKS) and RL low-energy states sampler (LSS), are implemented and explained in detail, while the meaning of general RL are also discussed. As a testbed, hydrogen diffusivity is computed using RL TKS in pure metals and a medium entropy alloy, CrCoNi, and compared with experiments. The algorithm can produce counter-intuitive hydrogen-vacancy cooperative motion. We also demonstrate that RL LSS can accelerate the sampling of low-energy configurations compared to the Metropolis–Hastings algorithm, using hydrogen migration to copper (111) surface as an example.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Determination of the Ability to Measure Traces of Water in Dehydrated Residues of Waste Water by IR Diffuse Reflectance Spectra

Rapid measurement of the moisture content of dehydrated residues is a critical problem, the solution of which will increase the efficiency of treatment facilities and optimize the process of applying flocculants. The ability to determine the moisture content of dehydrated residues using a meter operating on the IR reflectance principle was confirmed experimentally. The most suitable interference filters were selected based on an analysis of the obtained diffuse reflectance spectrum of the dehydrated residue in the range 1.0–2.7 μm. Calibration curves were constructed and compared for each filter set. A measuring filter with a transmittance maximum at 1.19 μm and a reference filter with a maximum at 1.3 μm gave the best agreement with the laboratory measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Quantum Transmission Conditions for Diffusive Transport in Graphene with Steep Potentials

We present a formal derivation of a drift-diffusion model for stationary electron transport in graphene, in presence of sharp potential profiles, such as barriers and steps. Assuming the electric potential to have steep variations within a strip of vanishing width on a macroscopic scale, such strip is viewed as a quantum interface that couples the classical regions at its left and right sides. In the two classical regions, where the potential is assumed to be smooth, electron and hole transport is described in terms of semiclassical kinetic equations. The diffusive limit of the kinetic model is derived by means of a Hilbert expansion and a boundary layer analysis, and consists of drift-diffusion equations in the classical regions, coupled by quantum diffusive transmission conditions through the interface. The boundary layer analysis leads to the discussion of a four-fold Milne (half-space, half-range) transport problem.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Ensemble flow reconstruction in the atmospheric boundary layer from spatially limited measurements through latent diffusion models

Due to costs and practical constraints, field campaigns in the atmospheric boundary layer typically only measure a fraction of the atmospheric volume of interest. Machine learning techniques have previously successfully reconstructed unobserved regions of flow in canonical fluid mechanics problems and two-dimensional geophysical flows, but these techniques have not yet been demonstrated in the three-dimensional atmospheric boundary layer. Here, we conduct a numerical analogue of a field campaign with spatially limited measurements using large-eddy simulation. We pose flow reconstruction as an inpainting problem, and reconstruct realistic samples of turbulent, three-dimensional flow with the use of a latent diffusion model. The diffusion model generates physically plausible turbulent structures on larger spatial scales, even when input observations cover less than 1% of the volume. Through a combination of qualitative visualization and quantitative assessment, we demonstrate that the diffusion model generates meaningfully diverse samples when conditioned on just one observation. These samples successfully serve as initial conditions for a large-eddy simulation code. We find that diffusion models show promise and potential for other applications for other turbulent flow reconstruction problems.

17 WIND ENERGY↗
DOE OSTI2018

Averaging Principle for the Higher Order Nonlinear Schrödinger Equation with a Random Fast Oscillation

This work concerns the problem associated with averaging principle for a higher order nonlinear Schrödinger equation perturbed by a oscillating term arising as the solution of a stochastic reaction–diffusion equation evolving with respect to the fast time. This model can be translated into a multiscale stochastic partial differential equations. Stochastic averaging principle is a powerful tool for studying qualitative analysis of stochastic dynamical systems with different time-scales. To be more precise, under suitable conditions, we prove that there is a limit process in which the fast varying process is averaged out and the limit process which takes the form of the higher order nonlinear Schrödinger equation is an average with respect to the stationary measure of the fast varying process. Finally, by using the Khasminskii technique we can obtain the rate of strong convergence for the slow component towards the solution of the averaged equation, and as a consequence, the system can be reduced to a single higher order nonlinear Schrödinger equation with a modified coefficient.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Bayesian sequential optimal experimental design for nonlinear models using policy gradient reinforcement learning

We present a mathematical framework and computational methods for optimally designing a finite sequence of experiments. This sequential optimal experimental design (sOED) problem is formulated as a finite-horizon partially observable Markov decision process (POMDP) under a Bayesian setting and with information-theoretic utilities. The formulation is general and may accommodate continuous random variables, non-Gaussian posteriors, and nonlinear forward models. The sOED design policy incorporates elements of feedback and lookahead simultaneously, and we show it to generalize the commonly-used batch and greedy design strategies. We solve for the sOED policy using the policy gradient (PG) method from reinforcement learning, and provide a derivation for the PG expression in the sOED context. Adopting an actor-critic approach, the policy and value functions are parameterized using deep neural networks and improved via PG estimates produced from simulated episodes of designs and observations. The new PG-sOED algorithm is first validated on a linear-Gaussian benchmark, and then compared against other design baselines on a sensor movement problem for contaminant source inversion in a convection-diffusion field. As a result, we provide explanation for the policy behaviors using knowledge of the underlying physical process.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Linear stability analysis of two fluid columns of different densities and viscosities in a gravity field

The linear stability of a vertical interface separating two miscible fluid columns of different densities and viscosities under the influence of gravity is investigated. This flow possesses a time-dependent reference state (each column accelerates at different rates owing to their different densities) and the interface thickness grows as the square root of time (by diffusion). Numerical integration of the linear initial-value problem is carried out and discussed in detail as a function of vertical and spanwise wavenumbers and the flow parameters. Adjoint-based optimization is performed in order to determine initial conditions that lead to maximum growth of disturbances in finite time. Results indicate that the rate of growth of the perturbation energy at small wavenumbers (less affected by viscosity initially) is dominated by two-dimensional modes (no spanwise variation). Substantial transient growth is observed at higher wave modes initially, followed by asymptotic decay of the perturbations at large time. Sensitivity of perturbation growth with respect to initial time, density and viscosity ratios is investigated. This work is complementary to previous inviscid analysis of this configuration, which showed that the interface was unconditionally unstable at all wave modes, even in the presence of surface tension, and that instability grew as the exponential of time squared.

Mechanics↗