Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Deposit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Investigation of the Deposition and Densification Parameters on the Mechanical Properties of Pressurized Spray Deposited (PSD) 3-D Printed Ceramic Components

Oak Ridge National Laboratory (ORNL) and HotEnd Works teamed to investigate the use of pressurized spray deposition (PSD) technology for the production of ceramic parts via additive manufacturing. Scanning electron microscopy of sintered parts provided by HotEnd Works revealed voids large enough to compromise the mechanical properties of PSD manufactured parts. Scanning electron microscopy and particle size analysis of the alumina oxide powder feedstocks indicated that the powders contained some large particles and some agglomerations in the powder. Further classification of the powder feedstocks and removal of the agglomerates by sonication in the liquid used for the PSD process are recommended. Analysis of sintered parts indicated that the sonic modulus for the alumina part is consistent with other known values for alumina. The density for this part was determined by standard Archimedes immersion density methods and was found to be > 99.7 % of the theoretical density for pure alumina.

36 MATERIALS SCIENCE↗

Control of Thickness and Chemical Properties of Atomic Layer Deposition Overcoats for Stabilizing Cu/γ-Al 2 O 3 Catalysts

Whereas sintering and leaching of copper nanoparticles during liquid-phase catalytic processing can be prevented by using atomic layer deposition (ALD) to overcoat the nanoparticles with AlOx, this acidic overcoat leads to reversible deactivation of the catalyst by resinification and blocking of the pores within the overcoat during hydrogenation of furfural. We demonstrate that decreasing the overcoat thickness from 45 to 5 ALD cycles is an effective method to increase the rate per gram of catalyst and to decrease the rate of deactivation for catalysts pretreated at 673 K, and a fully regenerable copper catalyst can be produced with only five ALD cycles of AlOx. Moreover, although an overcoat of MgOx does not lead to stabilization of copper nanoparticles against sintering and leaching during liquid-phase hydrogenation reactions, the AlOx overcoat can be chemically modified to decrease acidity and deactivation through the addition of MgOx, while maintaining stability of the copper nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superior Fischer-Tropsch Performance of Uniform Cobalt Nanoparticles Deposited into Mesoporous SiC

Electrochemically-derived well-crystalline mesoporous silicon carbide (pSiC) was used to host cobalt nanoparticles and to show superior catalytic performance during the CO hydrogenation according to Fischer-Tropsch. Colloidal metal particles (9 ± 0.4 nm) were prepared independently before depositing them into pSiC and, for comparison purposes, into commercially available silica (Davisil) and foam-like MCF-17 supports. The Co/pSiC catalyst demonstrated the highest catalytic activity of 117 ?molCO gCo-1 s-1 at 220 °C in the Fischer-Tropsch reaction, while the silica supported cobalt samples showed about one order of magnitude less activity. A significant increase in the C5+ hydrocarbons selectivity for Co/pSiC was observed. The stable performance of the catalyst is attributed to the high dispersion of the active phase and the use of silicon carbide acting as a thermally conductive and chemically inert porous support.

lablokou, V. S.↗

Enhanced Catalyst Durability for Bio-Based Adipic Acid Production by Atomic Layer Deposition

Harsh reaction environments challenge the lifetime productivity of conventional catalysts and impede emerging biobased chemical processes. Condensed-phase processing of muconic acid, a biobased platform chemical, leads to problematic levels of catalyst leaching and fouling. Atomic layer deposition (ALD) can improve catalyst durability using protective metal oxide coatings; however, a targeted coating strategy and cost models thereof are needed for application-specific deactivation challenges that can surmount these challenges while accounting for process implications. Herein, we utilize thin (<5 wt% Al) Al2O3 ALD coatings to increase the lifetime productivity of Pd/TiO2 during muconic acid hydrogenation to adipic acid. The ALD coating decreases Pd leaching by >3x and markedly improves the thermal stability of Pd and TiO2. Economic analysis for an adipic acid biorefinery supports that increased material costs and reduced catalyst productivity can be justified through lifetime extension. Broadly, this work lays the foundation for reducing the cost of biobased chemical processes through catalyst stability.

Settle, Amy↗

Epitaxial Atomic Layer Deposition of Sn-Doped Indium Oxide

Coherently strained, epitaxial Sn-doped In2O3 (ITO) thin films were fabricated at temperatures as low as 250 degrees C using atomic layer deposition (ALD) on (001)-, (011)-, and (111)-oriented single-crystal Y-stabilized ZrO2 (YSZ) substrates. Resultant films possess cube-on-cube epitaxial relationships with the underlying YSZ substrates and are smooth, highly conductive, and optically transparent. This epitaxial ALD approach is favorable compared to many conventional growth techniques as it is a large-scale synthesis method that does not necessitate the use of high temperatures or ultrahigh vacuum. These films may prove valuable as a conductive growth template in areas where high-quality crystalline thin film substrates are important, such as solar energy materials, light-emitting diodes, or wide bandgap semiconductors. Furthermore, we discuss the applicability of this ALD system as an excellent model system for the study of ALD surface chemistry, nucleation, and film growth.

Emery, Jonathan D.↗

Submonolayer Is Enough: Switching Reaction Channels on Pt/SiO 2 by Atomic Layer Deposition

The reaction mechanism of CO 2 with H 2 is studied on platinum nanoparticles supported on fumed silica. It is found that platinum nanoparticle size, reaction temperature, and metal oxide promoters play important roles in determining the reaction rate and the mechanism of forming surface carbonyl species. Metal oxide promoters consist of sub-monolayer titanium oxide or aluminum oxide overcoated onto the catalysts by atomic layer deposition (ALD). Furthermore, these alter the CO formation rate, influence the adsorption and desorption behavior, and switch the surface reaction channel from Eley-Rideal to Langmuir-Hinshelwood mechanism due to an enhancement of CO 2 affinity to the metal-metal oxide interface. At the temperatures relevant for catalytic turnover, ALD overcoating significantly increases catalytic activity in CO 2 hydrogenation to CH 4 and CO, while the identity of the oxide overcoat helps control product selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrazine-Free Solution-Deposited CuIn(S,Se)2 Solar Cells by Spray Deposition of Metal Chalcogenides

Solution processing of semiconductors, such as CuInSe2 and its alloys (CIGS), can significantly reduce the manufacturing costs of thin film solar cells. Despite the recent success of solution deposition approaches for CIGS, toxic reagents such as hydrazine are usually involved, which introduce health and safety concerns. Here, we present a simple and safer methodology for the preparation of high-quality CuIn(S, Se)2 absorbers from metal sulfide solutions in a diamine/dithiol mixture. The solutions are sprayed in air, using a chromatography atomizer, followed by a postdeposition selenization step. Two different selenization methods are explored resulting in power conversion efficiencies of up to 8%.

14 SOLAR ENERGY↗

Sequential Capacitive Deposition of Ionic Liquids for Conformal Thin Film Coatings on Oxygen Reduction Reaction Electrocatalysts

Ionic liquid (IL)-modified carbon-supported catalysts have demonstrated significant improvements in oxygen reduction reaction (ORR) activity. However, transition of this result from the half-cell to the proton exchange membrane fuel cell (PEMFC) has been challenging. Presented here is a processing methodology that yields the formation of a thin (<2 nm) conformal IL coating on the surface of both three-dimensional electrocatalysts and bulk single crystals through the sequential capacitive deposition (SCD) of anionic and cationic components and their subsequent condensation into a hydrophobic, protic IL. In conclusion, SCD shows promise for IL incorporation into preformed PEMFC catalyst layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗