SEARCH · Engineering Papers

Results for “Data processing and standardization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS2023

The IAU Recommended Photometric System for Ultraviolet Astronomy

In the current era when access to space is becoming easier and at a lower cost thanks to the standardised cubesat technology, numerous missions are expected to be launched to observe, particularly, at ultraviolet wavelengths. Given the reduced dimensions of the telescope that a cubesat can carry, most of these missions will be focused on photometric surveys of a reduced sample of targets of interest, and therefore each mission will define their own photometric bands according to their scientific objectives and orbital constraints. However, in order to provide a coherent view of the ultraviolet sky, the data should be post-processed under a common framework. In 2017, the IAU working group on ultraviolet astronomy identified the need to define such a common framework for the upcoming ultraviolet missions, and coordinated the definition of a standard set of photometric bands that could serve for homogenizing the current and future data. This paper presents the procedure adopted by the working group for the definition of the standard photometric system, that was approved by the IAU during the General Assembly Business Sessions held in August, 2021. The photometric system consists of seven bands, denoted as UV1-UV7, all included in the range 115 - 400 nm. Some of these bands are based on existing filters, while others have been defined as theoretical bands with constant throughput. This system is to be regarded as a set of synthetic bands for post-processing the data of any mission, and an example of its application to the SPARCS cubesat is also included. The photometric bands are publicly available and can be downloaded from https://www.nuva.eu/uv-photometry/.

Ultraviolet: ISM↗

NASA NTRSDate not supplied

What Is the OPP Approach to the Next Generation of Laboratory Requirements

Planetary Protection Quality Management System NASA’s Office of Planetary Protection uses a quality-based process evaluation approach to verify planetary protection bioburden compliance over a project’s life cycle. The verification strategy shifts from a comparative direct assay approach validating hardware bioburden at a “moment in time,” to one that implements a continual quality assurance demonstration of the analytical process via established data requirements, laboratory operational, and management parameters throughout the mission’s entire assembly process. Laboratory quality-based systems and management strategies are standardized and implemented across government and industry. A standardized laboratory quality system approach increases transparency throughout the project’s life cycle and aligns planetary protection analytical approaches with government and industry practices to support both NASA and commercial endeavors. Strategies include the implementation of a laboratory quality management structure that documents and routinely validates parameters critical to experimental design and data collection, provides data quality assessment parameters, and ultimately validates that the collected data is of sufficient quality and quantity to meet the specified technical goals. Planetary protection can draw on these practices to provide a systematic process-based quality approach to support planetary protection validation and compliance requirements. Quality approaches including data quality objectives, method performance, data acceptance criteria and the associated laboratory quality management system are presented to provide an overview and framework for a planetary protection laboratory quality management system.

Amy Baker↗

NASA NTRSDate not supplied

NASA GeneLab: Open Science for Life in Space

The NASA GeneLab project capitalizes on multi-omic technologies to maximize the return on spaceflight experiments. To do this, GeneLab maintains a publicly accessible database (GLDS) that houses spaceflight and spaceflight relevant multi-omics data and collaborates with NASA principal investigators and projects to generate additional omics data. GeneLab houses more than 350 transcriptomic, proteomic, metabolomic and epigenomic datasets from plant, animal and microbial experiments, with a growing number of these having been produced by the GeneLab Sequencing Lab. The GLDS contains rich metadata about each experiment and has integrated radiation dosimetry data from experiments flown on the Space Shuttle, International Space Station, and Free Flying spacecrafts. With the increasing amount and complexity of omics data being generated, GeneLab utilizes community-defined, common models for metadata and terminology so that omics data and results are discoverable and reliably reproducible. GeneLab uses the ISA-Tab specification and semantic model for organizing and representing omics metadata. In addition to metadata standards, data files must be open-source file or common exchange formats to ensure accessibility and usability by all users. To ease data ingestion and transfer, the web-based submission tool allows PIs a user-friendly user interface to curate, organize, and publish their space relevant omics data. In the more recent years, data curation and submission portal has incorporated the FAIR principles making data findable, accessible, interoperable, and reusable. To increase reusability of data, GeneLab has implemented an effort to present processed data in the GLDS in addition to the raw omics data. The processed data will enable interpretation of the data by a larger group of students, scientists and the general public. Standard pipelines for the transformation of raw data into visualizations were developed by four GeneLab Analysis Working Groups (animals, plants, microbes, multi-omics) comprised of over 200 scientists from NASA, industry, and academia. To explore the data, the GLDS provides users various tools for data analysis, collaborative workspace for file storage and sharing, and a visualization portal. The analysis platform built using the Galaxy toolshed provides access to a broad variety of users including those with limited bioinformatics experience and students to learn how to analyze spaceflight omics data. The visualization portal takes GeneLab one step closer to data democratization by removing all bioinformatics requisites to interpret transcriptomics data hosted in the repository. To train the next generation of scientists, NASA offers training programs such as GeneLab 4 High School (GL4HS) and GeneLab 4 Universities. NLM Curation at a Scale Workshop 2022 | NASA GeneLab (GL4U) to teach students bioinformatics and computational biology methods to analyze omics data. Discoveries made using GeneLab have begun and will continue to deepen our understanding of biology, advance the field of genomics, and help to discover cures for diseases, create better diagnostic tools, and ultimately allow astronauts to better withstand the rigors of long-duration spaceflight.

GeneLab↗

NASA NTRS1978

LANDSAT 3 world standard catalog, 6 March - 31 July 1978

The World Standard Catalog lists imagery acquired by LANDSAT 3 which was processed and input to the data files during the referenced period. Information such as date of entry, cloud cover, and image quality is given for each scene. The microfilm roll and frame on which the scene may be found is also indicated.

Source record↗

NASA NTRS1978

LANDSAT 2 world standard catalog, 1-31 October 1978

The World Standard Catalog lists imagery acquired by LANDSAT 2 which was processed and input to the data files during the referenced period. Information such as cloud cover and image quality is given for each scene. The microfilms roll and frame on which the scene may be found is also given.

Source record↗

NASA NTRS1978

LANDSAT 2 world standard catalog, 1-30 November 1978

The World Standard Catalog lists imagery acquired by LANDSAT 2 which was processed and input to the data files during the referenced period. Information such as cloud cover and image quality is given for each scene. The microfilm roll and frame on which the scene may be found is also given.

Source record↗

NASA NTRS1978

LANDSAT 3 world standard catalog, 1-31 December 1978

The World Standard Catalog lists imagery acquired by LANDSAT 3 which was processed and input to the data files during the referenced period. Information on cloud cover and image quality is given for each scene. The microfilm roll and frame on which the scene may be found is given.

Source record↗

NASA NTRS1978

LANDSAT 2 world standard catalog, 1-31 December 1978

The World Standard Catalog lists imagery acquired by LANDSAT 2 which was processed and input to the data files during the referenced period. Information on cloud cover and image quality is given for each scene. The microfilm roll and frame on which the scene may be found is presented.

Source record↗

NASA NTRS1979

LANDSAT 2 world standard catalog, 1-31 January 1979

The World Standard Catalog lists imagery acquired by LANDSAT 2 which are processed and input to the data files during the referenced period. Information such as cloud cover and image quality is given for each scene. The microfilm roll and frame on which the scene may be found is also given.

Source record↗

NASA NTRS1979

The charge injection device /CID/ as a stellar tracking sensor

A 128 x 128 element CID imager was operated in a simulated stellar trackling environment and evaluated for temporal and pattern noise and spectral response over a temperature range of -40 C to +25 C. The test devices were fabricated on long-lifetime bulk silicon material and utilized very thin upper-level polysilicon electrodes for enhanced spectral response. A standard microcomputer was used to generate all control signals and to collect and process performance data. The results of this program were used to predict the performance of a 400 x 400 CID array designed specifically for stellar-tracking.

Burke, H. K.↗

NASA NTRS1983

Time-of-flight anemometer for hot section applications

The design, construction and testing of laser anemometer configurations for Hot Section velocity measurements is considered. Optimizing the laser anemometer system necessarily included the data processing algorithms used. It is felt that the requirements here are too demanding for standard laser anemometer systems.

Edwards, R. V.↗

NASA NTRS1988

Applications of artificial intelligence to space station: General purpose intelligent sensor interface

This final report describes the accomplishments of the General Purpose Intelligent Sensor Interface task of the Applications of Artificial Intelligence to Space Station grant for the period from October 1, 1987 through September 30, 1988. Portions of the First Biannual Report not revised will not be included but only referenced. The goal is to develop an intelligent sensor system that will simplify the design and development of expert systems using sensors of the physical phenomena as a source of data. This research will concentrate on the integration of image processing sensors and voice processing sensors with a computer designed for expert system development. The result of this research will be the design and documentation of a system in which the user will not need to be an expert in such areas as image processing algorithms, local area networks, image processor hardware selection or interfacing, television camera selection, voice recognition hardware selection, or analog signal processing. The user will be able to access data from video or voice sensors through standard LISP statements without any need to know about the sensor hardware or software.

Mckee, James W.↗

NASA NTRS1990

Integrated Optoelectronic Interface

Proposed optoelectronic integrated-circuit device serves as "universal" or standard interface for transmission and reception of digital and analog signals in communication, data-processing, and control systems. Eliminates need for custom design of interface circuitry in sense that it embodies "master-chip" design easily adaptable to use with specific equipment. Includes directly modulated semiconductor laser to generate light signals for transmission along optical fiber; positive/intrinsic/negative, avalanche, or other photodiode to detect light signals received along another optical fiber;and driving, synchronizing, preamplifying, and signal-regenerating circuitry. Muliplexes electronic signals before transmission and/or demultiplexes electronic signals after reception.

Katz, Joseph↗

NASA NTRS2004

Value-added Data Services at the Goddard Earth Sciences Data and Information Services Center

The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), in addition to serving the Earth Science community as one of the major Distributed Active Archives Centers (DAACs), provides much more than just data. Among the value-added services available to general users are subsetting data spatially and/or by parameter, online analysis (to avoid downloading unnecessarily all the data), and assistance in obtaining data from other centers. Services available to data producers and high-volume users include consulting on building new products with standard formats and metadata and construction of data management systems. A particularly useful service is data processing at the DISC (i.e., close to the input data) with the users algorithm. This can take a number of different forms: as a configuration-managed algorithm within the main processing stream; as a stand-alone program next to the on-line data storage; as build-it-yourself code within the Near-Archive Data Mining (NADM) system; or as an on-the-fly analysis with simple algorithms embedded into the web-based tools. Partnerships between the GES DISC and scientists, both producers and users, allow the scientists to concentrate on science, while the GES DISC handles the data management, e.g., formats, integration, and data processing. The existing data management infrastructure at the GES DISC supports a wide spectrum of options: from simple data support to sophisticated on-line analysis tools, producing economies of scale and rapid time-to-deploy. At the same time, such partnerships allow the GES DISC to serve the user community more efficiently and to better prioritize on-line holdings. Several examples of successful partnerships are described in the presentation.

Leptoukh, Gregory G.↗

NASA NTRS2013

Human and Robotic Mission to Small Bodies: Mapping, Planning and Exploration

This study investigates the requirements, performs a gap analysis and makes a set of recommendations for mapping products and exploration tools required to support operations and scientific discovery for near- term and future NASA missions to small bodies. The mapping products and their requirements are based on the analysis of current mission scenarios (rendezvous, docking, and sample return) and recommendations made by the NEA Users Team (NUT) in the framework of human exploration. The mapping products that sat- isfy operational, scienti c, and public outreach goals include topography, images, albedo, gravity, mass, density, subsurface radar, mineralogical and thermal maps. The gap analysis points to a need for incremental generation of mapping products from low (flyby) to high-resolution data needed for anchoring and docking, real-time spatial data processing for hazard avoidance and astronaut or robot localization in low gravity, high dynamic environments, and motivates a standard for coordinate reference systems capable of describing irregular body shapes. Another aspect investigated in this study is the set of requirements and the gap analysis for exploration tools that support visualization and simulation of operational conditions including soil interactions, environment dynamics, and communications coverage. Building robust, usable data sets and visualisation/simulation tools is the best way for mission designers and simulators to make correct decisions for future missions. In the near term, it is the most useful way to begin building capabilities for small body exploration without needing to commit to specific mission architectures.

Neffian, Ara V.↗

NASA NTRS2003

A Study on the Development of Service Quality Index for Incheon International Airport

The main purpose of this study is located at developing Ominibus Monitors System(OMS) for internal management, which will enable to establish standards, finding out matters to be improved, and appreciation for its treatment in a systematic way. It is through developing subjective or objective estimation tool with use importance, perceived level, and complex index at international airport by each principal service items. The direction of this study came towards for the purpose of developing a metric analysis tool, utilizing the Quantitative Second Data, Analysing Perceived Data through airport user surveys, systemizing the data collection-input-analysis process, making data image according to graph of results, planning Service Encounter and endowing control attribution, and ensuring competitiveness at the minimal international standards. It is much important to set up a pre-investigation plan on the base of existent foreign literature and actual inspection to international airport. Two tasks have been executed together on the base of this pre-investigation; one is developing subjective estimation standards for departing party, entering party, and airport residence and the other is developing objective standards as complementary methods. The study has processed for the purpose of monitoring services at airports regularly and irregularly through developing software system for operating standards after ensuring credibility and feasibility of estimation standards with substantial and statistical way.

Lee, Kang Seok↗

NASA NTRSDate not supplied

WIS and WIGOS Metadata as the Foundation for a Sustainable Framework for Global Greenhouse Gas Watch Data Exchange

Metadata (data about data) is a critical component of data discovery, description, evaluation, documentation, and preservation. Developing and propagating metadata standards has been a longstanding area of activity in WMO and beyond. The WIS2 and WIGOS metadata models are being actively developed and maintained by dedicated task teams, established under the WMO Expert Team on Metadata. The metadata representations and vocabularies are governed by well-established processes within WMO. These standards are being used in a number of metadata/data exchange activities (e.g., WMO Information System 2.0 (WIS2), WIGOS (WMDR), Climate Data Management Systems (CMDS), etc.). It should also be noted that the application of the WIS2 and WIGOS standards fully support the WMO Unified Data Policy and open data policy as well as greatly enhance the value of observations by fostering data F.A.I.R.ness. Furthermore, the WMO metadata standards can serve as the foundation for a framework that will facilitate metadata mapping between the existing schemas used in well-established data centres, e.g., WMO WDCGG (World Data Centre for Greenhouse Gases) and NOAA ObsPack (Observation Package Data Products) and to automate metadata exchange between data centres as well as with WMO. These activities will play a central role in integrating measurements sponsored by various member countries and organizations to provide a more comprehensive characterization of the temporal and spatial distribution of the greenhouse gases. At the same time, this metadata exchange can lead to member countries and partner organizations improving their current metadata collection process for data discoverability, interoperability, and (re)usability. This presentation will describe metadata activities in the context of WIS2 and WIGOS and how they apply to GGGW data integration via metadata mapping and exchange.

Gao Chen↗

NASA NTRS1985

The heaviest cosmic-ray nuclei

The implications of abundance measurements of cosmic-ray nuclei heavier than Fe are examined in light of standard propagation models and nucleosynthetic theory. Suggestions that the cosmic-ray source abundances differ significantly from solar system abundances are not well supported by the data without assuming ad hoc models of preferential acceleration. The solar system abundances of Pb and Bi are split into r-, standard s-, and cyclic s-process components to assess the contributions of these nucleosynthetic processes to the cosmic-ray source. The apparent deficiency of Pb seen in the HEAO 3 HNE data might indicate an absence of Pb from the recycling s-process.

Margolis, S. H.↗