Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DEMONSTRATION PROGRAMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Review of NASA supercritical airfoils

NASA supercritical airfoils are characterized by a substantially reduced curvature of the midcord region of the upper surface together with increased camber near the trailing edge. The basic aerodynamic phenomena associated with the airfoils and representative wind tunnel results are discussed. The results indicate that the drag rise Mach numbers for NASA supercritical airfoils are 0.1 higher than for comparable NACA 6-series airfoils. A recent analytic method for predicting the aerodynamic characteristics of supercritical airfoils is described. The flight demonstration programs of three applications of supercritical airfoils utilizing the F-8, T-2C and F-111 as test beds are summarized.

Whitcomb, R. T.↗

Experiment planning during the Skylab missions

The objectives of the Skylab Program included observations of the earth, the sun, the stars, and a comet in addition to a variety of engineering and medical experiments. Attention is given to mission planning activities accomplished before the launch of the orbital workshop, during the manned missions, and between manned missions. Two major purposes of early experiments planning were related to the establishment of reasonable potential goals in terms of accomplishment and the discovery of potential problems in scheduling. Planning during the mission proceeded according to a scheme in which the planning was done on a daily basis. Experiences from the three Skylab missions are discussed separately. The results of the Skylab Program demonstrate the value of the daily experiment planning system that was capable of reacting to changing constraints.

Sevier, J. R.↗

Developments in low-gravity cryogenic propellant acquisition and thermal control systems

Development programs are described for two low-gravity cryogenic propellant acquisition systems: a full-screen liner system, and a refillable start-tank. First, based on experimental LH2 screen flow data, the fluid-dynamic characteristics of an integrated screen/thermodynamic vent system were analyzed for a design compared to 17.5 cu fg supercritical life-support systems, and for a Tug orbital LH2/LQ2 resupply system. Second, the analysis, design, fabrication, and test of a 10 cu ft, annular-screen start-tank with a wall-mounted thermodynamic vent was performed. The test program demonstrated that the system expelled LH2 against 1-g and performed properly over a range of conditions.

Cady, E. C.↗

Formation of ferrobasalt at east Pacific midocean spreading centers

A numerical modeling using a least squares petrologic mixing program demonstrates that ridge ferrobasalts from three east Pacific regions are generated from normal midocean ridge balsalt by crystal fractionation of plagioclase, clinopyroxene, and minor olivine at shallow mantle depths. Clinopyroxene is an important fractionating phase in this model in contrast to most previously proposed fractionation models. Calculations demonstrate that the ferrobasalts represent a much smaller percentage of residual liquid than has previously been proposed. Implications of extensive shallow crystal fractionation for the determination of depths of magma generation are discussed. The different fields on an anorthite-olivine-hypersthene ternary diagram for basalts from east Pacific fast and moderate spreading ridges can be explained by variable degrees of shallow crystal fractionation rather than by different depths of magma generation as suggested by Bass (1971) and Scheidegger (1973).

Clague, D. A.↗

Quality assurance plan for Solar Maximum Mission (SSM) Instruments electronic assembly - HRUV spectrometer/polarimeter

The quality assurance program demonstrates recognition of the quality aspects and an organized approach to achieve them. It ensures that quality requirements are determined and satisfied throughout all phases of contract performance, including preliminary and engineering design, development, fabrication, processing, assembly, inspection, test, checkout, packaging, shipping, storage, maintenance field use, flight preparations, flight operations and post-flight analysis, as applicable.

Source record↗

Dynamics of high-bypass-engine thrust reversal using a variable-pitch fan

The test program demonstrated that successful and rapid forward-to reverse-thrust transients can be performed without any significant engine operational limitations for fan blade pitch changes through either feather pitch or flat pitch. For through-feather-pitch operation with a flight inlet, fan stall problems were encountered, and a fan blade overshoot technique was used to establish reverse thrust.

Schaefer, J. W.↗

Liquid-hydrogen rocket engine development at Aerojet, 1944 - 1950

This program demonstrated the feasibility of virtually all the components in present-day, high-energy, liquid-rocket engines. Transpiration and film-cooled thrust chambers were successfully operated. The first liquid-hydrogen tests of the coaxial injector was conducted and the first pump to successfully produce high pressures in pumping liquid hydrogen was tested. A 1,000-lb-thrust gaseous propellant and a 3,000-lb-thrust liquid-propellant thrust chamber were operated satisfactorily. Also, the first tests were conducted to evaluate the effects of jet overexpansion and separation on performance of rocket thrust chambers with hydrogen-oxygen propellants.

Osborn, G. H.↗

Satellite communication for public services

Public service programs using NASA's ATS-6 and CTS satellites are discussed. Examples include the ATS-6 Health and Education Telecommunications experimental program and the use of CTS to enable students in one university to take courses presented at another distant university. Possible applications of satellite communication systems to several areas of public service are described, and economic and political obstacles hindering the implementation of these programs are considered. It is suggested that a federally sponsored program demonstrating the utility of satellites accomodating a large number of small terminals is needed to encourage commercial satellite operations.

Cooper, R. S.↗

Space-borne power conversion into a microwave beam and its impact on the environment of the upper atmosphere

The possible effect of microwave beams transmitted from Solar Power Satellites on the ionosphere has been studied theoretically. Particular attention is given to microwave-beam-heating of the F and D layers and theoretical predictions of such ionospheric modifications are used to determine resulting effects on the transmission efficiency of communication and navigation systems. It is recommended that a three-pronged technology and demonstration program be established to study microwave effects. The program would include theoretical studies, ground-based heating experiments, and an orbital experimental program for phase control of the microwave power transmission system.

Maynard, O. E.↗

Evacuated load-bearing high performance insulation study

A light weight, vacuum jacketed, load bearing cryogenic insulation system was developed and tested on a 1.17-m (46-in.) spherical test tank. The vacuum jacket consists of 0.08 mm (0.003 in.) thick 321 stainless steel formed into a wedge design that allows elastic jacket movements as the tank shrinks (cools) or expands (warms up or is pressurized). Hollow glass spheres, approximately 80 micrometers in diameter with a bulk density of 0.069 g/cc (4.3 lb cubic foot), provide the insulating qualities and one atmosphere load bearing capability required. The design, fabrication, and test effort developed the manufacturing methods and engineering data needed to scale the system to other tank sizes, shapes, and applications. The program demonstrated that thin wall jackets can be formed and welded to maintain the required vacuum level of .013 Pa yet flex elastically for multiple reuses. No significant shifting or breakage of the microspheres occurred after 13 simulated Space Tug flight cycles on the test tank and a hundred 1 atmosphere load cycles in a flat plate calorimeter. The test data were then scaled to the Space Tug LO2 and LH2 tanks, and weight, thermal performance, payload performance, and costs were compared with a helium purged multilayer insulation system.

Parmley, R. T.↗

The First Seasat-A Industrial Users Workshop

The purpose of this workshop was to begin the process of definition and development of the SEASAT-A Demonstration Program, leading to the implementation of a set of experiments which would begin during the latter part of 1978 following the launch of SEASAT-A (now scheduled for May 1978). NASA through the SEASAT-A program, has encouraged the planning of cooperative experiments by industry and government agencies that operate in areas of ocean activity that could benefit from improved measurements and forecasts of weather and ocean conditions. The objectives of these experiments are to: (1) evaluate the significance of SEASAT-A data to commercial user organizations; (2) assist in identifying those characteristics of follow-on systems that are important to industrial users; (3) obtain experimental evidence that could be used to refine estimates of the economic potential of an operational system; and (4) begin the technology transfer process to the industrial users.

Hicks, K. W.↗

Design and demonstration of an advanced data collection/position location system

The final report on a breadboard evaluation and demonstration program is reported concerning the applicability of MSK modulation and chirp-z transformer technology in Advanced Data Collection/Position Location (ADC/PL) systems. The program effort consisted of three phases - design, testing, and evaluation. Section 2 describes the breadboard hardware built during the design phase of the program, Section 3 describes the tests conducted on the breadboard and the results of the tests, and Section 4 presents a brief analysis and summary of the findings of the breadboard tests and develops a sample ADC/PL system which incorporates both MSK modulation and a chirp-z transformer.

Source record↗

LOX cooled thrust chamber technology developments

An experimental LOX heat-transfer study and a LOX-cooled thrust-chamber demonstration program are summarized. Heat transfer to supercritical oxygen was investigated at 17 to 34.5 MPa (2460 to 5000 psia), and heat fluxes up to 90 MW/sq m (55 Btu/sq in.-sec). Experimental data obtained previously were correlated along with these recent data, and a design equation was derived which correlates 95% of the data within + or - 30%. Liquid-oxygen-cooled thrust chambers have been designed using this correlation and are currently being fabricated. A test program is planned for evaluating the LOX-cooled design concept using NASA test facilities. The purpose of these tests is to verify the LOX cooling correlation in a high-pressure liquid rocket engine and to determine the effects of a LOX coolant leak.

Spencer, R. G.↗

Thrust and mass flow characteristics of four 36 inch diameter tip turbine fan thrust vectoring systems in and out of ground effect

The calibration tests carried out on the propulsion system components of a 70 percent scale, powered model of a NASA 3-fan V/STOL aircraft configuration are described. The three X3/6B/T58 turbotip fan units used in the large scale powered model were tested on an isolated basis over a range of ground heights from H/D of 1.02 to infinity. A higher pressure ratio LF336/J85 fan unit was tested over a range of ground heights from 1.55 to infinity. The results of the test program demonstrated that: (1) the thrust and mass flow performance of the X376B/T58 nose lift unit is essentially constant for H/D variations down to 1.55; at H/D 1.02 back pressurization of the fan exit occurs and is accompanied by an increase in thrust of five percent; (2) a change in nose fan exit hub shape from flat plate to hemispherical produces no significant difference in louvered lift nozzle performance for height variations from H/D = 1.02 to infinity; (3) operation of the nose lift nozzle at the higher fan pressure ratio generated by the LF336/J85 fan system causes no significant change in ground proximity performance down to an H/D of 1.55, the lowest height tested with this unit; and (4) the performance of the left and right X376B/T58 lift/cruise units in the vertical lift mode remains unchanged, within plus or minus two percent for the range of ground heights from H/D = 1.02 to infinity.

Esker, D. W.↗

Solar heating, cooling, and hot water systems installed at Richland, Washington

The project described is part of the U. S. Department of Energy's solar demonstration program, and became operational in April 1978. The solar system uses 6,000 square feet of flat-plate liquid collectors in a closed loop to deliver solar energy through a liquid-liquid heat exchanger to the building heat-pump duct work or 9,000-gallon thermal energy storage tank. A 25-ton Arkla solar-driven absorption chiller provides the cooling, in conjunction with a 2,000 gallon chilled water storage tank and reflective ponds on three sides of the building surplus heat. A near-by building is essentially identical except for having conventional heat-pump heating and cooling, and can serve as an experimental control. An on-going public relations program was provided from the beginning of the program, and resulted in numerous visitors and tour groups.

Source record↗

Seasat-A ASVT: Commercial demonstration experiments. Results analysis methodology for the Seasat-A case studies

The SEASAT-A commercial demonstration program ASVT is described. The program consists of a set of experiments involving the evaluation of a real time data distributions system, the SEASAT-A user data distribution system, that provides the capability for near real time dissemination of ocean conditions and weather data products from the U.S. Navy Fleet Numerical Weather Central to a selected set of commercial and industrial users and case studies, performed by commercial and industrial users, using the data gathered by SEASAT-A during its operational life. The impact of the SEASAT-A data on business operations is evaluated by the commercial and industrial users. The approach followed in the performance of the case studies, and the methodology used in the analysis and integration of the case study results to estimate the actual and potential economic benefits of improved ocean condition and weather forecast data are described.

Source record↗

Solar energy in California industry - Applications, characteristics and potential

Results of a survey to determine the potential applicability of solar thermal energy to industrial processes in California are presented. It is found that if the heat for all industrial processes at temperatures below 212 F were supplied by solar energy, total state energy consumption could be reduced by 100 trillion Btus (2%), while the use of solar energy in processes between 212 and 350 F could displace 500 trillion Btus. The issues and problems with which solar energy must contend are illustrated by a description of fluid milk processing operations. Solar energy application is found to be technically feasible for processes with thermal energy requirements below 212 F, with design, and degree of technical, economic and management feasibility being site specific. It is recommended that the state provide support for federal and industrial research, development and demonstration programs in order to stimulate acceptance of solar process heat application by industry.

Barbieri, R. H.↗

The search and rescue satellite mission - A basis for international cooperation

The use of geostationary and polar-orbiting satellites to monitor and locate signals of the Emergency Locator Transmitter (ELT) and Emergency Position Indicating Radio Beacon (EPIB) of general aviation aircraft and inspected marine vessels respectively is described. The joint U.S. Canada/France SARSAT demonstration program will require a minimum of four minutes of mutual visibility of distress transmitter, local user terminal and satellite to obtain a location by Doppler tracking. The program consisting of placing instrumentation on-board three of the Tiros-N series of NOAA operational satellites is attracting interest also from other countries including the USSR, Norway, Australia, and Japan.

Redisch, W. N.↗