Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Coordinate transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Commercial Building Energy Code Field Study: Data Collection Methodology and Protocol

In support of the U.S. Department of Energy’s Commercial Buildings Energy Code Field Study, this data collection methodology and protocol provides guidance on all aspects of undertaking a compliance study, from development of a sampling plan to recruitment to code requirements and compliance checks for each energy code measure specified to be collected. The protocol also includes a data collection form that captures all key information needed for analysis of commercial energy code compliance. This methodology was developed by the Institute for Market Transformation in coordination with Pacific Northwest National Laboratory (PNNL) and the U.S. Department of Energy Building Energy Codes Program with the objective of assisting states, jurisdictions, utilities and others as they seek to measure and demonstrate compliance rates with energy codes in commercial buildings, as well as to target areas for improvement through increased energy code compliance and broader energy-efficiency programs. It is also intended to facilitate a consistent and replicable approach to research studies of this type and establish a transparent data set representing baseline construction practices across the U.S.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Legacy Devices and Interoperability: Developing a Scientific Strategy for Inclusion and Representation of Older Devices

Legacy devices across grid, transportation, and building systems present complex modernization challenges that extend far beyond simple equipment obsolescence. Pulling from presentations and break-out group discussions from this workshop on legacy devices across all three sectors, this report examines the interconnected factors driving replacement decisions, documents successful modernization initiatives from recent years, and provides strategic guidance for coordinating infrastructure transformation across these critical sectors.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

ACDC (Automated Campbell Diagram Code) [SWR-26-042]

This application provides a web-based graphical user interface to generating Campbell Diagrams and visualizing mode shapes for OpenFAST turbine models. Determining the aeroelastic stability and dynamic characteristics of wind turbines is a critical step in turbine design and analysis. Historically, extracting natural frequencies and mode shapes from OpenFAST—the industry-standard whole-turbine simulation code—has been a fragmented and tedious process. It required manual model configuration, command-line linearization execution, and complex post-processing via proprietary scripts to handle rotating-frame dynamics. To address these workflow bottlenecks, we present the Automated Campbell Diagram Code (ACDC), an open-source graphical software tool developed by the National Laboratory of the Rockies (NLR) under the DOE-funded Distributed Wind Aeroelastic Modeling (dWAM) project. ACDC streamlines the end-to-end linearization and stability analysis workflow into a single, intuitive cross-platform application. The software guides users through OpenFAST model configuration, definition of operating points, and the automated execution of steady-state trim and linearization simulations. Under the hood, ACDC automates the complex mathematical post-processing steps required for rotating systems, including Multi-Blade Coordinate (MBC) transformations, eigenanalysis, and advanced modal tracking utilizing the Modal Assurance Criterion (MAC) and spectral clustering. Finally, ACDC processes these results to automatically generate Campbell diagrams and features a robust 3D visualization engine to animate full-system mode shapes. By eliminating the reliance on external post-processing environments and manual data manipulation, ACDC significantly accelerates dynamic analysis and lowers the barrier to entry for wind energy researchers and engineers.

Summerville, Brent [National Laboratory of the Roc↗
NASA NTRS1967

Differentiating unit orthogonal vectors in a Riemannian space that admits and N-tuply orthogonal system of hypersurfaces.

In a normal coordinate system { y 𝑎 } , the identity 𝜕 2 𝑥 𝑝 /∂y 𝑛 ∂y 𝑚 = ∂ 2 𝑥 𝑝 /∂y 𝑚 ∂y 𝑛 is used to obtain expressions, involving the components of the metric tensor in this coordinate system, for the derivatives of the unit tangent vectors to the parametric curves. An example is given for a normal coordinate system in the De Sitter universe.

Riemann space↗
NASA NTRS1971

Finite difference solution to the three-dimensional, incompressible thermal energy boundary-layer equation

An implicit numerical method has been adopted for the solution to the three-dimensional, energy boundary-layer equation. The energy equation is written in terms of a dimensionless temperature function, the relative stagnation-enthalpy difference, and transformed by the introduction of a Blasius-type transformation of coordinates as well as dimensionless stream functions. The method is applied to the problem consisting of an infinite cylinder joined with its axis perpendicular to a thin, flat, heated plate. A Prandtl number equal to one is simply considered.

Fillo, J. A.↗
NASA NTRS1973

Two concepts for the reduction of payload attitude slewing times.

The concepts presented are particularly valuable in sounding rocket applications, where experiment data-gathering time above the atmosphere is measured in minutes per flight. One concept is a practical nonlinear control law for slewing a payload in one axis, with performance that approaches time-optimal as the uncertainty in angular acceleration approaches zero. The second concept is a practical transformation-of-coordinates system allowing slewing about an axis not coincident with any of the three control axes of the payload, so that the payload experiment axis may move along the great circle arc containing the initial and terminal target points. Implementation of both concepts is facilitated by the availability of variable-thrust cold-gas thrustors. Both concepts can result in significant reductions in slewing times compared with more conventional systems.

Riley, D. C.↗
NASA NTRS1973

A new technique for calculating reentry base heating

The laminar base flow field of a two-dimensional reentry body has been studied by Telenin's method. The flow domain was divided into strips along the x-axis, and the flow variations were represented by Lagrange interpolation polynomials in the transformed vertical coordinate. The complete Navier-Stokes equations were used in the near wake region, and the boundary layer equations were applied elsewhere. The boundary conditions consisted of the flat plate thermal boundary layer in the forebody region and the near wake profile in the downstream region. The resulting two-point boundary value problem of 33 ordinary differential equations was then solved by the multiple shooting method. The detailed flow field and thermal environment in the base region are presented in the form of temperature contours, Mach number contours, velocity vectors, pressure distributions, and heat transfer coefficients on the base surface. The maximum heating rate was found on the centerline, and the two-dimensional stagnation point flow solution was adquate to estimate the maximum heating rate so long as the local Reynolds number could be obtained.

Meng, J. C. S.↗
NASA NTRS1974

Basic research and data analysis for the national geodetic satellite program and for the earth and ocean physics applications program

Activities related to the National Geodetic Satellite Program are reported and include a discussion of Ohio State University's OSU275 set of tracking station coordinates and transformation parameters, determination of network distortions, and plans for data acquisition and processing. The problems encountered in the development of the LAGEOS satellite are reported in an account of activities related to the Earth and Ocean Physics Applications Program. The LAGEOS problem involves transmission and reception of the laser pulse designed to make accurate determinations of the earth's crustal and rotational motions. Pulse motion, ephemeris, arc range measurements, and accuracy estimates are discussed in view of the problem. Personnel involved in the two programs are also listed, along with travel activities and reports published to date.

Source record↗
NASA NTRS1975

The scattering of electromagnetic pulses by a slit in a conducting screen

A direct method for calculating the impulse response of a slit in a conducting screen is presented which is derived specifically for the analysis of transient scattering by two-dimensional objects illuminated by a plane incident wave. The impulse response is obtained by assuming that the total response is composed of two sequences of diffracted waves. The solution is determined for the first two waves in one sequence by using Green's functions and the equivalence principle, for additional waves in the sequence by iteration, and for the other sequence by a transformation of coordinates. The cases of E-polarization and H-polarization are considered.

Ackerknecht, W. E., III↗
NASA NTRS1977

Oblique orthographic projections and contour plots

Oblique orthographic projections allow model to be viewed in any selected orientation specified by Euler-angle transformation. This transformation resolves coordinate system of model to principal plane on which display is to be plotted.

Giles, G. L.↗