Thermal conductivity and specific heat of amorphous polymers between 0.4 and 4 degrees K
Thermal conductivity and specific heat of amorphous polymers between 0.4 and 4 deg K
Chiang, Y. C.↗
SEARCH · Engineering Papers
Results for “Conducting polymers”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Development of lithium ion conducting interface between lithium metal and a lithium ion conducting ceramic using block polymers
The lithium-air (Li-air) technology developed by EDF uses an air electrode which works with an aqueous electrolyte, which prevent the use of unprotected lithium metal electrode. A Li+ ionic conductor glass ceramic is used to separate the aqueous electrolyte compartment from the negative lithium electrode. However, this glass-ceramic is not stable in contact with lithium, it is thus necessary to add a protective buffer layer. In another hand, this protection should ideally resist to lithium dendritic growth. It is in this context that this research project which has as goal the development of a protective buffer layer based on block copolymer electrolytes (BCE) between the lithium metal and the lithium ionic conductor ceramic, for lithium-air battery. In a first part, the BCE is studied in lithium-lithium symmetric cells, in order to determine their electrochemical properties such as ionic conductivity, steady state transference number, and finally their resistance to dendritic growth during cycling. Several characterization techniques were employed and especially hard X-ray micro-tomography to analyze the lithium morphology before and after cycling. For single-ion BCE, we expect to suppress dendritic growth, however, we report here for the first time, the visualization of a homogeneous growth of lithium but the formation of dense lithium objects. In another part, the composite BCE-ceramic is studied by electrochemical impedance spectroscopy (EIS). The cycling of lithium-composite-lithium symmetric cells and the analysis of the EIS measurement after each cycle permit to determine if the dendrites have cross the protective layer and are in contact with the ceramic. Besides, the quantification of the polarization loss at the interface polymer-ceramic is evaluated by polarization experiments. This contribution is found to be small.
36 MATERIALS SCIENCE↗
Enhancement of Conjugated Polymer Microstructure and Mixed-Conducting Properties via Chalcogenophene Heteroatom Substitution
Heteroatom substitution is a powerful tool to tune the intra- and intermolecular structure of conjugated polymers as well as their resulting optoelectronic and electrochemical properties. Here, a series of oligoethylene glycol bithiophene chalcogenophene polymers (p(g3T2-X)) with systematically varied furan, thiophene, selenophene, and tellurophene comonomers have been synthesized for mixed ionic-electronic conducting applications. Their microstructures have been thoroughly characterized ex situ and in situ with X-ray scattering, and their mixed conducting properties have been probed in electrochemical transistor testbeds. Chalcogenophene heteroatom choice was found to clearly dictate the polymer microstructure (crystallite dimensionality and orientation) and tune mixed conducting properties. Proceeding down Group 16, from O to Se systematically directed the molecular ordering of 2D polymer crystallites from face-on (O) to mixed (S) to edge-on (Se) orientations, with Te driving the polymer to form well-oriented edge-on 3D crystallites. Heteroatom dictated crystallite quality, and orientation tuned relative ionic transport by 2 orders of magnitude. Hole mobility (μ hole ) and mixed conducting figure of merit (μC*) were each tuned over an order of magnitude depending on heteroatom choice, with the Te-containing polymer reaching μ hole = 3.60 cm 2 V –1 s –1 and μC* = 483 F cm –1 V –1 s –1 , due to improved molecular ordering. Insights from this polymer series highlight target microstructures for enhanced mixed conduction in future conjugated polymers.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
p -Azaquinodimethane: A Versatile Quinoidal Moiety for Functional Materials Discovery
The past 50 years of discovery in organic electronics have been driven in large part by the donor–acceptor design principle, wherein electron-rich and electron-poor units are assembled in conjugation with each other to produce small band gap materials. While the utility of this design strategy is undoubtable, it has been largely exhausted as a frontier of new avenues to produce and tune novel functional materials to meet the needs of the ever-increasing world of organic electronics applications. Its sister strategy of joining quinoidal and aromatic groups in conjugation has, by comparison, received much less attention, to a great extent due to the categorically poor stability of quinoidal conjugated motifs. In 2017 though, the p-azaquinodimethane (AQM) motif was first unveiled, which showed a remarkable level of stability despite being a close structural analogue to p-quinodimethane, a notably reactive compound. In contrast, dialkoxy AQM small molecules and polymers are stable even under harsh conditions and could thus be incorporated into conjugated polymers. When polymerized with aromatic subunits, these AQM-based polymers show notably reduced band gaps that follow reversed structure–property trends to some of their donor–acceptor polymer counterparts and yield organic field-effect transistor (OFET) hole mobilities above 5 cm 2 V –1 s –1 . Additionally, in an ongoing study, these AQM-based compounds are also showing promise as singlet fission (SF) active materials due to their mild diradicaloid character. An expanded world of AQMs was accessed through their ditriflate derivatives, which were first used to produce ionic AQMs (iAQMs) sporting two directly attached cationic groups that significantly affect the AQM motif’s electronics, producing strongly electron-withdrawing quinoidal building blocks. Conjugated polyelectrolytes (CPEs) created with these iAQM building blocks exhibit optical band gaps stretching into the near-infrared I (NIR-I) region and showed exemplary behavior as photothermal therapy agents. In contrast to these stable AQM examples, the synthetic exploration of AQMs also produced examples of more typical diradicaloid reactivity but in forms that were controllable and produced intriguing and high-value products. With certain substitution patterns, AQMs were found to dimerize to form highly substituted [2.2]paracyclophanes in distinctly more appreciable yields than typical cyclophane formation reactions. Certain AQM ditriflates, when crystallized, undergo light-induced topochemical polymerization to form ultrahigh molecular weight (>10 6 Da) polymers that showed excellent performances as dielectric energy storage materials. These same AQM ditriflates could be used to produce the strongly electron-donating redox-active pentacyclic structure: pyrazino[2,3-b:5,6-b']diindolizine (PDIz). Importantly, the PDIz motif allowed for the synthesis of exceedingly small band gap (0.7 eV) polymers with absorbances reaching all the way into the NIR-II region that were also found to produce strong photothermal effects. Both as stable quinoidal building blocks and through their controllable diradicaloid reactivity, AQMs have already proven to be versatile and effective as functional organic electronics materials.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Li[superscript +] Transport in Single-Ion Conducting Side-Chain Polymer Electrolytes with Nanoscale
Explore the source record for details and available documents.
Liu, Jiacheng↗
Additive-Induced Morphology Change of Polymer Film Enables Enhanced Charge Mobility and Faster Organic Electrochemical Transistor Switching
Conjugated polymers (CPs) play an important role in organic electrochemical transistors (OECTs) for bioelectronics and related applications, where they serve as channel materials. Currently, most successful polymers for CPs are re-engineered from traditional CPs by replacing hydrophobic alkyl side chains with hydrophilic ethylene glycol or ionic groups. Frustratingly, the enhanced ion transport often compromises the charge mobility of the original CP. In this work, we present an additive-mediated method to construct a modified poly(3-hexylthiophene) (P3HT) film to enable efficient ion migration. The additive is designed with a cleavable diazo group that releases nitrogen and 2-methoxyethanol, a volatile compound, to alter the P3HT film morphology. OECTs based on the film exhibit improved response times. Interestingly, the process also enhances the crystallinity of P3HT, leading to higher hole mobility compared with pristine P3HT. This study proposes an in situ strategy to achieve the functionality of the OMIEC via morphological regulation, offering a promising route to simultaneously enhance both ion accessibility and charge mobility.
Organic polymers↗
Novel Micro ElectroMechanical Systems (MEMS) Packaging for the Skin of the Satellite
This paper includes a discussion of the novel packaging techniques that are needed to place MEMS based thermal control devices on the skin of various satellites, eliminating the concern associated with potential particulates &om integration and test or the launch environment. Protection of this MEMS based thermal device is achieved using a novel polymer that is both IR transmissive and electrically conductive. This polymer was originally developed and qualified for space flight application by NASA at the Langley Research Center. The polymer material, commercially known as CPI, is coated with a thin layer of ITO and sandwiched between two window-like frames. The packaging of the MEMS based radiator assembly offers the benefits of micro-scale devices in a chip on board fashion, with the level of protection generally found in packaged parts.
Darrin, M. Ann↗
Transparent and Electrically Conductive Carbon Nanotube-Polymer Nanocomposite Materials for Electrostatic Charge Dissipation
In recent years, nanocomposite materials have been extensively studied because of their superior electrical, magnetic, and optical properties and large number of possible applications that range from nano-electronics, specialty coatings, electromagnetic shielding, and drug delivery. The aim of the present work is to study the electrical and optical properties of carbon nanotube(CNT)-polymer nanocomposite materials for electrostatic charge dissipation. Single and multi-wall carbon nanotubes were grown by catalytic chemical vapor deposition (CCVD) on metal/metal oxide catalytic systems using acetylene or other hydrocarbon feedstocks. After the purification process, in which amorphous carbon and non-carbon impurities were removed, the nanotubes were functionalized with carboxylic acid groups in order to achieve a good dispersion in water and various other solvents. The carbon nanostructures were analyzed, both before and after functionalization by several analytical techniques, including microscopy, Raman spectroscopy, and X-Ray photoelectron spectroscopy. Solvent dispersed nanotubes were mixed (1 to 7 wt %) into acrylic polymers by sonication and allowed to dry into 25 micron thick films. The electrical and optical properties of the films were analyzed as a function of the nanotubes' concentration. A reduction in electrical resistivity, up to six orders of magnitude, was measured as the nanotubes' concentration in the polymeric films increased, while optical transparency remained 85 % or higher relative to acrylic films without nanotubes.
Dervishi, E.↗
Thermal Conductivity of Ultem(TradeMark)/Carbon Nanofiller Blends
In an effort to improve polymer thermal conductivity (TC), Ultem(TradeMark) 1000 was compounded with nano-fillers of carbon allotropes. Ultem(TradeMark) 1000 was selected since it is both solution and melt processable. As-received and modified multiwalled carbon nanotubes (MWCNTs), vapor grown carbon nanofibers (CNF) and expanded graphite (EG) were investigated. MWCNTs were modified by functionalizing the surface through oxidization with concentrated acids, mixing with an alkyl bromide, and addition of alkyl and phosphorus compounds after initial treatment with n-butyl lithium. Functionalization was performed to improve the TC compatibility between the resin and MWCNTs. It was postulated that this may provide an improved interface between the MWCNT and the polymer which would result in enhanced TC. The nano-fillers were mixed with Ultem(TradeMark) 1000 in the melt and in solution at concentrations ranging from 5 to 40 wt%. Ribbons were extruded from the blends to form samples where the nano-fillers were aligned to some degree in the extrusion direction. Samples were also fabricated by compression molding resulting in random orientation of the nano-fillers. Thermal properties of the samples were evaluated by Differential Scanning Calorimetry (DSC) and Thermal Gravimetric Analyzer (TGA). Tensile properties of aligned samples were determined at room temperature. The specimens were cut from the ribbons in the extrusion direction; hence the nano-fillers are somewhat aligned in the direction of stress. Typically it was observed that melt mixed samples exhibited superior mechanical properties compared to solution mixed samples. As expected, increased filler loading led to increased modulus and decreased elongation with respect to the neat polymer. The degree of dispersion and alignment of the nano-fillers was determined by high-resolution scanning electron microscopy (HRSEM). HRSEM of the ribbons revealed that the MWCNTs and CNFs were predominantly aligned in the flow direction. The TC of the samples was measured using a Nanoflash(TradeMark) instrument. Since the MWCNTs and CNF are anisotropic, the TC was expected to be different in the longitudinal (parallel to the nanotube and fiber axis) and transverse (perpendicular to the nanotube and fiber axis) directions. The extruded ribbons provided samples for transverse TC measurements. However, to determine the TC in the longitudinal direction, the ribbons needed to be stacked and molded under 1.7 MPa and 270 C. Samples were then obtained by cutting the molded block with a diamond saw. The largest TC improvement was achieved for aligned samples when the measurement was performed in the direction of MWCNT and CNF alignment (i.e. longitudinal axis). Unaligned samples also showed a significant improvement in TC and may be potentially useful in applications when it is not possible to align the nano-filler. The results of this study will be presented.
Ghose, S.↗
Tuning Anion Composition and Mobility to Balance Ionic Conductivity and Cation Selectivity in Solid Polymer Electrolytes
Solid polymer electrolytes (SPEs) offer a promising route toward safe and high-performance electrochemical energy storage, yet a fundamental challenge in SPEs involves improving ionic conductivity while maintaining selective cation transport. The hurdle exists because ion transport is typically coupled closely to polymer segmental dynamics. Herein, a glassy single-ion-conducting polymer, poly[lithium sulfonyl(trifluoromethane sulfonyl)imide methacrylate] (PLiMTFSI), in which the anions were tethered to the polymer, was blended with a flexible polymer, poly(oligo-oxyethylene methyl ether methacrylate) (POEM), and a series of small-molecule lithium salts, in which the anions were untethered [lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), lithium bis(fluorosulfonyl)imide (LiFSI), lithium trifluoromethanesulfonate (LiTf), or lithium perchlorate (LiClO 4 )]. The impact of salt anion volume and tethered-to-untethered anion ratio on the ion conduction behavior and thermal properties of blend electrolytes was investigated. In some cases, conductivity could be enhanced through this ternary blend approach. For example, a POEM-based polymer blend containing a bulky salt anion (TFSI⁻) and an equimolar mixture of PLiMTFSI and LiTFSI exhibited a Li + conductivity (4.8×10 -4 S/cm) an order of magnitude higher than that of a comparable POEM / LiTFSI system (6.3×10 -5 S/cm) at 100 °C. This enhancement was attributed to a more than ninefold increase in lithium transference number (0.66 in the ternary blend vs. 0.07 in POEM / LiTFSI). Overall, this study highlights the potential for tuning anion composition and mobility to achieve relatively high ionic conductivities and maintain selective cation transport in SPEs, offering a pathway to enable batteries that tolerate elevated temperatures.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Tensile Creep and Stress-rupture Behavior of Polymer Derived Sic Fibers
Tensile creep and stress-rupture studies were conducted on polymer derived Nicalon, Hi-Nicalon, and SiC/BN-coated Nicalon SiC fibers. Test conditions were temperatures from 1200 to 1400 C, stresses from 100 to 1600 MPa, stress application times up to 200 hours, and air, argon, and vacuum test environments. For all fibers, creep occurred predominantly in the primary stage. Hi-Nicalon had much higher 0.2 and 1 percent creep strengths than as-produced as well as-coated Nicalon fibers. The stress-rupture strength of Hi-Nicalon up to 100 hours was also higher than that of the coated and as-produced Nicalon fibers. SiC/BN coating on Nicalon increased only the short-term low-temperature rupture strength. Limited testing in argon and vacuum suggests that for all fiber types, creep and rupture resistances are reduced in comparison to the results in air. Possible mechanisms for the observed behavior are discussed.
Yun, H. M.↗
Morphological controls on flow conductivity and viscosity of bentonite–polymer composites
In this study, the authors investigate the morphological organisation of polymers in bentonite–polymer composites (BPCs) used in geosynthetic clay liners and controls on hydraulic conductivity and viscosity. A limited understanding of the relationship between the microstructure of BPCs and their macroscopic engineering behaviour motivates this study. The polymer resides in the inter-granular pores of bentonite based on synchrotron-based small-angle X-ray scattering measurements, scanning electron microscopy imaging and pore size analyses. On wetting, the polymer swells to produce a swollen hydrogel residing in the inter-granular pores. Enhanced tortuosity arising from hydrogel formation reduces the hydraulic conductivity of BPCs. The higher viscosity of the BPC slurry is attributed to the higher shear resistance emerging from swelling of the polymer fraction on wetting. These findings link the morphological features of BPCs to the observed hydraulic conductivity and viscosity of these materials.
Engineering↗
Sequential Doping of Ladder-Type Conjugated Polymers for Thermally Stable n-Type Organic Conductors
Doping of organic semiconductors is a powerful tool to optimize the performance of various organic (opto)electronic and bioelectronic devices. Despite recent advances, the low thermal stability of the electronic properties of doped polymers still represents a significant obstacle to implementing these materials into practical applications. Hence, the development of conducting doped polymers with excellent long-term stability at elevated temperatures is highly desirable. Here, we report on the sequential doping of the ladder-type polymer poly(benzimidazobenzophenanthroline) (BBL) with a benzimidazole-based dopant (i.e., N-DMBI). By combining electrical, UV–vis/infrared, X-ray diffraction, and electron paramagnetic resonance measurements, we quantitatively characterized the conductivity, Seebeck coefficient, spin density, and microstructure of the sequentially doped polymer films as a function of the thermal annealing temperature. Importantly, we observed that the electrical conductivity of N-DMBI-doped BBL remains unchanged even after 20 h of heating at 190 °C. This finding is remarkable and of particular interest for organic thermoelectrics.
36 MATERIALS SCIENCE↗
Unraveling the pathway towards superionic transport in polymer electrolytes
Ionic transport in polymers is critical for Li-ion batteries, fuel cells, flow batteries and many other energy storage and conversion technologies. A significant enhancement of ion conductivity in polymers may be achieved through an increase in the polarity of side chains and their self-organization into specific morphologies, which can potentially act as percolated ionic structures. However, higher polarity increases attractive interactions within a polymer matrix and slows down its segmental dynamics, which conversely hinders ionic transport. To overcome this tradeoff, we designed the functionalization of a Li salt-doped polymer matrix by tailored amounts of zwitterionic (ZI) groups. Our results suggest the emergence of a self-assembled percolation conductivity regime above a specific ZI concentration, in which ion hopping decouples from segmental dynamics by up to ten orders of magnitude. Consequently, in the highly concentrated ZI regime, our polymeric materials exhibit in their glassy state energy barriers for ion hopping similar to, or even smaller than, those reported for superionic ceramics. Our study also reveals that ion dynamics in the poly(zwitterion) with all monomers carrying ZI groups is significantly faster than that of a monomeric ZI compound, although the latter has much faster structural relaxation. Furthermore, this result highlights the crucial role played by the local morphology on the ion transport of polymer electrolytes and opens a new pathway for the design of superionic polymers, significantly expanding the current limited portfolio of solid-state electrolytes for energy applications.
Ion conductivity↗
Lithium Polymer Electrolytes and Solid State NMR
Research is being done at the Glenn Research Center (GRC) developing new kinds of batteries that do not depend on a solution. Currently, batteries use liquid electrolytes containing lithium. Problems with the liquid electrolyte are (1) solvents used can leak out of the battery, so larger, more restrictive, packages have to be made, inhibiting the diversity of application and decreasing the power density; (2) the liquid is incompatible with the lithium metal anode, so alternative, less efficient, anodes are required. The Materials Department at GRC has been working to synthesize polymer electrolytes that can replace the liquid electrolytes. The advantages are that polymer electrolytes do not have the potential to leak so they can be used for a variety of tasks, small or large, including in the space rover or in space suits. The polymers generated by Dr. Mary Ann Meador's group are in the form of rod -coil structures. The rod aspect gives the polymer structural integrity, while the coil makes it flexible. Lithium ions are used in these polymers because of their high mobility. The coils have repeating units of oxygen which stabilize the positive lithium by donating electron density. This aids in the movement of the lithium within the polymer, which contributes to higher conductivity. In addition to conductivity testing, these polymers are characterized using DSC, TGA, FTIR, and solid state NMR. Solid state NMR is used in classifying materials that are not soluble in solvents, such as polymers. The NMR spins the sample at a magic angle (54.7') allowing the significant peaks to emerge. Although solid state NMR is a helpful technique in determining bonding, the process of preparing the sample and tuning it properly are intricate jobs that require patience; especially since each run takes about six hours. The NMR allows for the advancement of polymer synthesis by showing if the expected results were achieved. Using the NMR, in addition to looking at polymers, allows for participation on a variety of other projects, including aero-gels and carbon graphite mat en als. The goals of the polymer electrolyte research are to improve the physical properties of the polymers. This includes improving conductivity, durability, and expanding the temperature range over which it is effective. Currently, good conductivity is only present at high temperatures. My goals are to experiment with different arrangements of rods and coils to achieve these desirable properties. Some of my experiments include changing the number of repeat units in the polymer, the size of the diamines, and the types of coil. Analysis of these new polymers indicates improvement in some properties, such as lower glass transition temperature; however, they are not as flexible as desired. With further research we hope to produce polymers that encompass all of these properties to a high degree.
Berkeley, Emily R.↗
Ion-Conducting Thermoresponsive Films Based on Polymer-Grafted Cellulose Nanocrystals
Mechanically robust, thermo-responsive, ion-conducting nanocomposite films are prepared from poly(2-phenylethyl methacrylate) grafted cellulose nanocrystals (MxG-CNC-g-PPMA). One-component nanocomposite films of the polymer grafted nanoparticle (PGN) MxG-CNC-g-PPMA are imbibed with 30 wt% imidazolium-based ionic liquid, to produce flexible ion-conducting films. These films with 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (MxG-CNC-g-PPMA/[H]) not only displays remarkable improvements in toughness (>25 times) and tensile strength (>70 times) relative to the corresponding nanocomposites consisting of the ionic liquid imbibed in the two component CNC/PPMA nanocomposite, but also shows higher ionic conductivity than the corresponding neat PPMA with the same wt.% of ionic liquid. Notably, the one-component film containing 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (MxG-CNC-g-PPMA/[E]) exhibits temperature responsive ionic conduction. The ionic conductivity decreases at around 60°C as a consequence of the lower critical solution temperature (LCST) phase transition of the grafted polymer in the ionic liquid, which leads to phase separation. Moreover, holding the MxG-CNC-g-PPMA/[E] film at room temperature for 24 hours returns the film to its original homogenous state. These materials exhibit properties relevant to thermal cutoff safety devices (e.g., thermal fuse) where a reduction in conductivity above a critical temperature is needed.
36 MATERIALS SCIENCE↗
Structure and dynamics of ILs-based gel polymer electrolytes and its enhanced conductive properties with the incorporation of Al 2 O 3 nanofibers
Here, this work reports the enhanced mobility of ions in ionic liquid (IL)-based gel polymer electrolytes (GPEs) with the incorporation of Al 2 O 3 nanofibers. A combination of PVDF-HFP, EMIMTFSI and LiTFSI with 3 wt% Al 2 O 3 nanofibers has been prepared through solution casting technique. The room temperature ionic conductivity of PVDF-HFP: ILs electrolyte (45:55, weight ratio of 0.82) (GPE) is found to be 2.7 × 10 –5 S cm –1 , which increases up to 7.8 × 10 –5 S cm –1 in Al 2 O 3 containing GPE (Al-GPE). Pulsed field gradient (PFG) NMR results validate the increased ionic conductivity observed in Al-GPE. We found that the diffusivity of Li + , TFSI – and EMIM + increases when Al 2 O 3 nanofibers are well-distributed in the GPE matrix. The surface morphology and the amorphicity of GPEs are examined through SEM and XRD analyses. Lastly, the local structure of Al 2 O 3 fibers and the molecular-level interactions of ions with polymer, and their effect on the diffusivity of ions are established through solid-state NMR detecting 27 Al, 1 H, 13 C, 19 F nuclei including 2D 13 C{ 1 H} HETCOR NMR experiments. The 13 C DPMAS and CPMAS experiments highlight the dynamic heterogeneity associated with the ions that are embedded in the rigid and the mobile phase of GPEs. While some of the ionic species strongly interact with polymer chains in the rigid environment, the majority of them reside in the mobile phase and contribute to the overall increased conductivity. Most importantly, Al 2 O 3 nanofibers significantly affect the dynamics of ionic species that are present in the mobile phase between the polymer chains.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Polycarbonate‐Based Solid‐Polymer Electrolytes for Solid‐State Sodium Batteries
Solid-polymer electrolytes comprised of polypropylene carbonate (PPC) and varied sodium bis(fluorosulfonyl)imide (NaFSI) salt concentrations are investigated for implementation as a conductive solid polymer electrolyte into solid-state cathode composites utilizing a sodium-layered oxide active material. The ionic conductivity generally increases with NaFSI salt content, reaching ≈1 mS cm −1 at 80 °C at the highest salt concentration (PPC:NaFSI = 0.5:1). Through an all-in-one slurry casting method, Na 2/3 Ni 1/3 Mn 2/3 O 2 cathode composites are fabricated in which the dispersed PPC electrolyte acts as the primary binder. Enabled by a bilayer polymer electrolyte system, cycling performance with the PPC cathode electrolyte is optimized with respect to salt concentration and anode material. The best cyclability is achieved with a moderate salt concentration electrolyte (PPC:NaFSI = 5:1), showcasing an initial capacity of 83 mA h g −1 with a remarkable 80% capacity retention after 150 cycles at C/5 rate and 60 °C. The superior performance of the lower salt concentration electrolyte is attributed to better electrochemical stability, as confirmed by linear sweep voltammetry and online electrochemical mass spectrometry measurements. In conclusion, these results underscore the potential of carbonate-based polymer electrolytes and the importance of balancing electrolyte conductivity and stability in cell design.
25 ENERGY STORAGE↗