Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Compass”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Kiloton Class ISRU Systems for LO2/LCH4 Propellant Production on the Mars Surface

As part of the 2023 strategic analysis cycle to explore the trade space, the NASA Mars Architecture Team wanted to explore what it takes to produce in situ on Mars many hundreds of tons of propellants for a large all-chemical transportation system. The conceptual operations and design of the LO 2 /LCH 4 in situ resource utilization (ISRU) water acquisition, propellant production and liquification system was assigned to the NASA Compass concurrent engineering team with support from various NASA ISRU, cryogenic fluid management, and surface power experts. The conceptual point design examined one case producing 300 t of LO 2 /LCH 4 from the Mars atmosphere and delivered water in 20 months and storing the liquified propellants in a to-be-reused lander. Several of these large single-stage, all-chemical class large vertical landers would deliver the required ISRU equipment. The required 150 t of water stock for the ISRU system was traded between three options: delivered, pumped from subsurface ice deposits or extracted from surface soils. The large propellant production systems consist of atmospheric CO 2 collection scroll pumps, a combined solid oxide electrolysis and methanation system to convert the CO 2 and water into gaseous O 2 and CH 4 , and various dryers, scrubbers, and separators to remove the excess water, CO 2 and H 2 . The liquefaction system consisted of 90 K cryocoolers to provide cold Ne to the launch vehicle tanks to liquify these CH 4 and O 2 gases and store them as rocket propellants. The systems are deployed using a 6 t (payload) capable chassis derived from conceptual pressurized rover designs. In total, the propellant production and liquefaction systems required three propellant production pallets, two liquefaction pallets, two water tankers, and six 40 kW-fission surface power systems (FSPS) with cabling. All this equipment was found to notionally fit inside two- 75 metric ton payload capacity Mars ascent and landing vehicles (MALV). For the case where 150 t of water delivered from Earth, four cargo MALVs are required for the full system. The same is true when the 150 t of water is extracted through surface mining. For the borehole system, only 3 cargo MALVs are necessary. A comparison of approaches in terms of number of landers, number and type of elements, power and time is made.

ISRU↗

Space Weather 101

Earth has an intrinsic magnetic field. Most people know this, because they use the magnetized needle of a compass to locate the cardinal directions north, east, south, and west. Most people don’t realize however, that Earth’s magnetic field extends well out into space where it meets, combines, and interacts with the Sun’s much stronger magnetic field. The interactions happen because the Sun sends out a steady stream of mostly protons and electrons in all directions along its magnetic field -- the solar wind. The Sun also produces continuous light emissions in infrared to ultraviolet to X-ray, in addition to eruptive emissions of X-rays and bulk ionized gas, called flares and coronal mass ejections. The ionizing radiation from the Sun striking our upper atmosphere creates a layer of ionized gas that leads to our own outflowing ionized gas, called plasma, along Earth’s magnetic field lines. The Sun’s outflowing solar wind and coronal mass ejections, together with its large magnetic field, drive strong responses inside Earth’s magnetic and plasma system. Together with cosmic radiation, these processes in the space environment are called Space Weather. That term includes the responses Earth’s magnetized plasma system has to these external drivers, which cause dangerous conditions for astronauts and satellites in space, as well as to us and our systems in the atmosphere and on the ground. This lecture is intended to make you aware of the risks and lead you to a basic awareness of the processes going on in our near-Earth space environment.

Space Weather↗

Beamed Energy and Communications Optical Node (BEACON) Demonstrator

Due to long shadow periods (2 weeks or greater) on the south pole, concepts to raise solar arrays to a sufficient height at specific locations have shown the capability to provide power to surface users for much longer periods. Such a tower can also provide a 3rd Generation Partnership Project (3GPP) service for users up to 10 km away, dependent on terrain. An option to deliver power, albeit with low efficiency, using a laser beam coupled with the tower height could provide mobile and fixed users power during darkness, reducing their battery requirements. A demonstration of these technologies in the lunar environment is crucial to support future Artemis campaigns as well as potential emerging lunar infrastructures. A demonstrator design of a 15 m deployed boomon the south pole has been shown to enable both the gathering of kilowatts of power and the provision of 3GPP relay and backhaul given an appropriate lunar location. Using a laser to send power to a photovoltaic receiver has been proposed to transmit electrical power on the moon, particularly for applications such as powering a rover in near-polar permanently shadowed regions (PSR) where solar power is not available. In this work, the Compass team performed a conceptual engineering design study of a near-term laser surface-to-surface power beaming and relay station using a tower to simultaneously carry the power source (Vertical Solar Array Technologies (VSAT)[1]), the 3GPP relay antenna, and the laser telescope.

Deployable solar array tower laser beamed power 3G↗

Beamed Energy and Communications Optical Node (BEACON) Demonstrator

Due to long shadow periods (2 weeks or greater) on the south pole, concepts to raise solar arrays to a sufficient height at specific locations have shown the capability to provide power to surface users for much longer periods. Such a tower can also provide a 3rd Generation Partnership Project (3GPP) service for users up to 10 km away, dependent on terrain. An option to deliver power, albeit with low efficiency, using a laser beam coupled with the tower height could provide mobile and fixed users power during darkness, reducing their battery requirements. A demonstration of these technologies in the lunar environment is crucial to support future Artemis campaigns as well as potential emerging lunar infrastructures. A demonstrator design of a 15 m deployed boomon the south pole has been shown to enable both the gathering of kilowatts of power and the provision of 3GPP relay and backhaul given an appropriate lunar location. Using a laser to send power to a photovoltaic receiver has been proposed to transmit electrical power on the moon, particularly for applications such as powering a rover in near-polar permanently shadowed regions (PSR) where solar power is not available. In this work, the Compass team performed a conceptual engineering design study of a near-term laser surface-to-surface power beaming and relay station using a tower to simultaneously carry the power source (Vertical Solar Array Technologies (VSAT)[1]), the 3GPP relay antenna, and the laser telescope.

Lunar Relay↗

Trajectory Design for a Solar Necklace of Repurposed Gateway Logistics Modules

The Solar Necklace mission concept, initially formed from a study conducted by the Compass Team at NASA’s Glenn Research Center, aims to maximize the scientific potential of a spacecraft’s lifetime by redefining their proposed disposal trajectories. By repurposing logistics modules (LMs) initially designated for heliocentric disposal after servicing NASA’s Gateway, a constellation of spacecraft could be placed around the sun. This paper assesses the feasibility of reusing vehicles equipped with solar science packages, sending them into a heliocentric orbit to enhance solar science capabilities, and potentially provide early warning capabilities for future piloted spacecraft. A comprehensive analysis of the trajectory design aspects for the Solar Necklace mission was performed, highlighting key components of the study such as Earth-relative drift rates, ∆v requirements, Earth-flyby opportunities, number of lunar flybys, and final orbital state parameters. Additionally, the paper serves as a proof-of-concept for the repurposing of Gateway LMs using convenient, low-cost methods of advancing solar science, space weather understanding, and climate research.

Mission Design↗

Extraction of Transversity and Collins Functions

We present a global re-analysis of recent experimental data on azimuthal asymmetries in semi-inclusive deep inelastic scattering, from the HERMES and COMPASS Collaborations, and in e{sup +}e{sup -} --> h_1h_2X processes, from the Belle Collaboration. The transversity distribution and the Collins functions are extracted simultaneously, in a revised analysis which also takes into account a new parameterization of the unknown functions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Preface and Summary

Primary Physics with Secondary Beams of K L 's Not all of physics can be explored by primary beams of electrons and protons, however much these have taught us over the past 60 years. Electron-positron colliders give access to restricted sets of quantum numbers. From proton-proton collisions we have long learned about all manner of high energy reactions. However, access to excited mesons and baryons has been most universally achieved with pion and kaon secondary beams, and latterly pho-ton beams both virtual and real. Nowadays the wealth of information on polarized photon beams on polarized targets has totally revolutionized baryon spectroscopy, especially in the lightest flavor sector. The measurement of polarization asymmetries has constrained partial wave analyses far beyond anything conceivable with pion beams. Nevertheless, these only give access to the product of photocouplings of each excited baryon and its coupling to the hadron final state, such as πN , ππN , ηN , etc. Contemporaneously, in the meson sector, the COMPASS experiment with pion beams on protons at 190 GeV/c, together with heavy flavor decays in e + e - annihilation, have given access to multi-meson final states, like 2π, 3π, with greater precision than ever before. This has given hints and suggestions of new resonances, like the a 1 (1420). To understand the constituent structure of hadrons requires information on the relationship of each meson and baryon to those with different flavors, but the same J P quantum numbers. At its simplest, this is to understand the quark model multiplet structure, where this is appropriate. What is more, so ubiquitous are ππ, πK, KK, ηπ, ηK, ... final states as the decay products of almost every hadron, that knowledge of the properties of these is critical to every analysis. Unitarity colors and shapes the universality of such final state interactions in each set of quantum numbers. This means that however precise our measurements of γN → πη () N , with GlueX for instance, we cannot really determine the fine resonant structure of such a process without some information on πη and πη scattering too. Nor can we determine any flavor partners without information on the corresponding Kη () channels. For that secondary kaon beams are essential. While J-PARC has a whole program of charged strange particle and hypernuclear reactions, photon beams allow unique access to other channels. It was realized long ago that intense photon beams like that about to be delivered to Hall D at JLab, could produce secondary beams. The charged particles can readily be bent away, leaving a neutral particle beam dominated by K L : long lived kaons being produced far more copiously than neutrons above 3–4 GeV momentum. Such a facility provides access to a whole range of physics that is the subject of this meeting. The reactions that can be studied cover the meson spectrum and dynamics, the baryon spectrum and dynamics, and final state interactions that link mesons and baryons together. This includes particularly the channels Kπ, Kη, Kη in the meson sector. These explore the very limitations of chiral dynamics: the strange quark's current mass is 30-50 times that of the

42 ENGINEERING↗

Workshop on Pion-Kaon Interactions (PKI2018) Mini-Proceedings

This volume is a short summary of talks given at the PKI2018 Workshop organized to discuss current status and future prospects of pi -K interactions. The precise data on pi K interaction will have a strong impact on strange meson spectroscopy and form factors that are important ingredients in the Dalitz plot analysis of a decays of heavy mesons as well as precision measurement of Vus matrix element and therefore on a test of unitarity in the first raw of the CKM matrix. The workshop has combined the efforts of experimentalists, Lattice QCD, and phenomenology communities. Experimental data relevant to the topic of the workshop were presented from the broad range of different collaborations like CLAS, GlueX, COMPASS, BaBar, BELLE, BESIII, VEPP-2000, and LHCb. One of the main goals of this workshop was to outline a need for a new high intensity and high precision secondary KL beam facility at JLab produced with the 12 GeV electron beam of CEBAF accelerator.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

STUDY OF THE η'π 0 SYSTEM IN GLUEX

The η'π is an important decay channel for the potentially exotic hybrid meson π 1 (1600) that has been detected in the COMPASS, VES and E852 experiments. These previous experiments used a charged pion beam as a probe. In contrast, the GlueX experiment is designed to search for the exotic hybrid mesons using a linearly polarized photon beam. This thesis project analyzes the η'π 0 system produced in GlueX by the reaction γp → η'π 0 p. After optimizing the event selection to minimize background contributions, a mass independent partial wave analysis is performed in search of an exotic signature. Within the currently available statistical precision, no signal was found.

Dotel, Rupesh↗

Extraction of the distribution function h⊥1T from experimental data

We attempt an extraction of the pretzelosity distribution (h?1T) from preliminary COMPASS, HERMES, and JLAB experimental data on sin(3?h??S) asymmetry on proton, and effective deuteron and neutron targets. The resulting distributions, albeit with big errors, for the first time show tendency for up-quark pretzelosity to be positive and down-quark pretzelosity to be negative. A model relation of pretzelosity distribution and orbital angular momentum of quarks is used to estimate contributions of up and down quarks.

Prokudin, A.↗

Partonic transverse distributions of up and down quarks

The quark-gluon dynamics manifests itself in a set of non-perturbative functions describing all possible spin-spin and spin-orbit correlations. The Transverse Momentum Dependent parton distributions (TMDs) and Generalized Parton Distributions (GPDs) carry information not only on the longitudinal but also on the transverse momentum and position of partons, providing rich and direct information on the orbital motion of quarks. Single and Dihadron semi-inclusive and hard exclusive production, both in current and target fragmentation regions, provide a variety of spin and azimuthal angle dependent observables, sensitive to the dynamics of quark-gluon interactions. Studies of the 3D PDFs are currently driving the upgrades of several existing facilities (JLab, COMPASS and RHIC), and the design and construction of new facilities worldwide (EIC, FAIR, and JPARC). In this talk, we present an overview of the current status and some future measurements of the orbital structure of nucleons at Jefferson Lab.

Avagyan, Harutyun↗

Indications of process dependence and the Sivers effect

We analyze the spin asymmetry for single inclusive jet production in proton-proton collisions collected by AnDY experiment at the Relativistic Heavy Ion Collider and the Sivers asymmetry data from semi-inclusive deep inelastic scattering experiments. In particular, we consider the role color gauge invariance plays in determining the process-dependence of the Sivers effect. We find that after carefully taking into account the initial-state and final-state interactions between the active parton and the remnant of the polarized hadron, the calculated jet spin asymmetry based on the Sivers functions extracted from HERMES and COMPASS experiments is consistent with the AnDY experimental data. This provides a first indication for the process-dependence of the Sivers effect in these processes.\footnote{ Phys.Rev.Lett. 110 (2013) 232301} We also make predictions for both direct photon and Drell-Yan spin asymmetry, to further test the process-dependence of the Sivers effect in future experiments.

Gamberg, Leonard↗

Baryon Resonance determination from Lattice QCD

There has been a resurgence of interest in spectroscopy with a new generation of experiments worldwide, for example BES III, COMPASS, GSI/Panda, and Jefferson Lab's GlueX project as well as CLAS12. Spectroscopy reveals fundamental aspects of hadronic physics. However, the excited spectrum of light quark mesons and baryons is not well determined nor understood. Lattice QCD is quite amenable to such non-perturbative studies. Recent calculations have determined a version of the highly excited spectrum of baryons with zero and non-zero strangeness. Current efforts are aimed at determining the resonance structure of such states. I will report on these recent calculatuions and outline methods that are used for resonance parameter determination from the lattice.

Edwards, Robert↗

Remediation of Occupied Commercial Property Subject to Widespread Radium-226 Contamination: Update from WM2012 Paper - 16652

Amec Foster Wheeler was contacted by a company that managed commercial office space. High Rn-222 measurements had been observed throughout the facility and the landlord had been advised to commission a radiological survey of the site. The site had been purchased by the client in the 1990's. Initial desk studies found that the building had operated for around 50 years as a compass factory. Non-intrusive investigation identified widespread Ra-226 contamination. Ra-226 was found in the fabric of the building, in attic spaces, buried under floor boards and underlying car parks. Intrusive investigation was undertaken to estimate volume(s) of waste, waste categories, activity concentrations and the total inventory of radioactive materials on site. This work identified the presence of 180 GBq of Ra-226 on site. A programme of work is currently underway to remediate the site tackling areas posing the greatest risk to site occupants as a priority. We have worked closely with Regulators, our client, and tenants, to decontaminate the fabric of the building whilst areas of the building remain occupied. Early decontamination works identified that radon levels within the building were stubbornly high despite the removal of radium contamination. An independent radon source was suspected. A contaminated drain was discovered leading to a blocked-off river race running under the old mill building. A significant quantity of radium contaminated sludge was identified within the river race. This was believed to be the source of the excessive radon concentrations within the building. The paper will present work undertaken to investigate and remediate the inventory of sludge from beneath the building. It will describe the operational difficulties of working within a dynamic environment impacted by high dose rates, high radon concentrations, water ingress and waste retrieval challenges. The paper will present the radiological and environmental impacts of the work and detail the achieved end points. This was a challenging project working in confined spaces impacted by physical and radiological constraints. The remedial action undertaken significantly reduced radon concentrations in the building metres above the river race. It also significantly reduced the likelihood of radium contamination being mobilised into the river and the wider environment. The achieved end point permitted the building to return to uncontrolled commercial use. The end point achieved within the river race will ensure a safe working environment for future regular structural survey work. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Joint Factorization of QCD and QED Radiation in Lepton-Hadron Scattering

The factorization theorem plays an important role in the analysis of high energy quantum chromodynamic (QCD) processes, separating the nonperturbative hadronic interaction into the universal parton distribution functions (PDFs) and fragmentation functions (FFs) and the process-dependent interactions into short distance perturbative calculations, with any interference power suppressed. With a virtual photon exchange, lepton-hadron deep inelastic scattering (DIS) provides an electromagnetic hard probe for the partonic structure of colliding hadrons and has played an important role in the development of QCD factorization. However, the collision induced QED radiation can change the momentum of the exchanged but unobserved virtual photon, making the photon-hadron frame, where the factorization formalism for DIS and semi-inclusive DIS (SIDIS) was derived, ill defined. A new analogous factorization approach has been introduced to separate the leading power process-independent QED radiative contributions to the single photon exchange by introducing lepton distribution functions (LDFs) and lepton fragmentation functions (LFFs), while process-dependent effects are perturbatively calculated with large logarithms removed [J. High Energ. Phys. 2021, 157 (2021)]. These LDFs and LFFs are considered global, as they appear in many different interactions, such as e+e-, DIS and SIDIS, so data from experiments can be used to fit and describe these functions across a wide range of lepton scattering. In this work, I will apply this new hybrid factorization approach to lepton-hadron DIS and SIDIS. For DIS, I derive the NLO short distance perturbative contribution to the cross section and demonstrate the effects the QED radiation has on the cross section using this approach using the CTEQ parameterization for the QCD functions. As part of the SIDIS analysis, I study the cross-section in two different kinematic regions: (1) the scattered lepton and observed hadron are not near back-to-back, and (2) they are close to back-to-back, where collinear QCD factorization works for (1) and TMD QCD factorization for (2) while collinear QED factorization works for both. As part of this work, I show the effects on the SIDIS cross section using fixed order calculations for the unpolarized structure function by first showing the effect of the radiative corrections on the main kinematic variables, especially how the internal transverse momentum is significantly correlated to the external angular dependence, and then the unpolarized structure function (or cross section) with matching between the descriptions for low and high transverse momentum. This work will impact the calculations for predictions for data from COMPASS and various Jefferson Lab experiments.

Cammarota, Justin [Univ. of Kentucky, Lexington, K↗

Portable Radiation Package (PRP) Instrument Handbook

The Portable Radiation Package (PRP) was developed to provide basic radiation information in locations such as ships at sea where proper exposure is remote and difficult, the platform is in motion, and azimuth alignment is not fixed. Development of the PRP began at Brookhaven National Laboratory (BNL) in the mid-1990s and versions of it were deployed on ships in the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility’s Nauru-99 project. The PRP was deployed on ships in support of the National Aeronautics and Space Administration (NASA) Sensor Intercomparison for Marine Biological and Interdisciplinary Ocean Studies (SIMBIOS) program. Over the years the measurements have remained the same while the post-processing data analysis, especially for the FRSR, has evolved. This document describes the next-generation Portable Radiation Package (PRP2) that was developed for the DOE ARM Facility, under contract no. 9F-31462 from Argonne National Laboratory (ANL). The PRP2 has the same scientific principles that were well validated in prior studies, but has upgraded electronic hardware. The PRP2 approach is completely modular, both in hardware and software. Each sensor input is treated as a separate serial stream into the data collection computer. In this way the operator has complete access to each component of the system for purposes of error checking, calibration, and maintenance. The resulting system is more reliable, easier to install in complex situations, and more amenable to upgrade.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Solar and Battery Storage Permitting and Siting Requirements - Solar Prize Round 7 (CRADA Final Report)

The purpose of this research project was to aggregate zoning and permitting data for utility-scale solar PV and battery energy storage systems. The ultimate goal of this collaboration is to lower solar and battery energy storage system soft costs by streamlining regulatory due diligence and reducing the burden of conducting feasibility assessments for solar and storage systems. The below sections describe the specific research completed by NLR (the contractor) in furtherance of the agreement with Vanox (the participant).

14 SOLAR ENERGY↗

Fourth Annual Workshop on Space Operations Applications and Research (SOAR 90)

The papers presented at the Space Operations, Applications and Research (SOAR) Symposium, hosted by the Air Force Space Technology Center and held at Albuquerque, New Mexico, on June 26-28, 1990, are documented in these proceedings. Over 150 technical papers were presented at the Symposium, which was jointly sponsored by the Air Force and NASA Johnson Space Center. the technical areas included were: Automation and Robotics, Environmental Interactions, Human Factors, Intelligent Systems, and Life Sciences. NASA and Air Force programmatic overviews and panel sessions were also held in each technical area. These proceedings, along with the comments by technical area coordinators and session chairmen, will be used by the Space Operation Technology Subcommittee (SOTS) of the Air Force Systems Command and NASA Space Technology Interdependency Group (STIG) to assess the status of the technology, as well as the joint projects/activities in various technical areas. The Symposium proceedings include papers presented by experts from NASA, the Air Force, universities, and industries in various disciplines.

Life Sciences↗