SEARCH · Engineering Papers
Results for “Chemical classification”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
An Evaluation of Electronic Nose for Space Program Applications
The ability to monitor air contaminants in the Shuttle and the International Space Station is important to ensure the health and safety of astronauts. Three specific space applications have been identified that would benefit from a chemical monitor: organic contaminants in crew cabins, propellant contaminants in the airlock, and pre-combustion fire detection. NASA has assessed several commercial and developing electronic noses (e-noses) for these applications. A preliminary series of tests identified those e-noses that exhibited sufficient sensitivity to the vapors of interest. These e-noses were further tested to assess their ability to identify vapors, and in-house software has been developed to enhance identification. This paper describes the tests, the classification ability of selected e-noses, and the software improvements made to meet the requirements for these space program applications.
Development of a Methodology to Assess the Impact of Non-Conventional Waste Streams Following a Radiological Incident - 18271
The Environmental Protection Agency's (EPA's) Waste Estimation Support Tool (WEST) is a Geographic Information System (GIS)-based decision support tool for estimating waste generated from remediation and cleanup activities following a radiological incident. WEST uses the Federal Emergency Management Agency's (FEMA's) Hazus-MH software's infrastructure information combined with image classification capabilities to estimate the quantity of waste and debris that may result from a radiological incident. WEST can be used to create customized decontamination strategies that allow end-users to evaluate different means of decontamination and how those strategies may impact the resulting waste stream in each geographical locality. This capability can potentially reduce the response/recovery time frame and cost. One of the key observations from past applications of WEST is that planning scenarios are site-specific, especially when dealing with chemical, biological, radiological, or nuclear (CBRN) waste management issues. Furthermore, site-specific issues are not limited to resource limitations or response bottlenecks but should also account for differences in an area's geography and urban footprint, a phenomenon observed during the Fukushima response. For instance, a recent WEST case study found that the amount of waste generated per unit of affected area, for a given decontamination approach, is largely a function of the building surface area in the affected area (relative to the ground surfaces). However, differences in the geometry and density of contaminated objects in the landscape may impact the amount and characteristics of the waste stream. Although buildings typically constitute a large portion of the surface area in urban environments, other objects such as vehicles and trees can be just as prominent. For example, seasonal changes in the amount of foliage present can alter the non-structural surface area calculated for an area like New York City by 20-30%. Very little is known about the impact that these non-conventional waste streams have on overall remediation strategies, or to what extent differences in characteristics of urban versus rural environments, traffic activities, or seasonal variations may have on these factors. This paper will present the proposed methodology to incorporate into WEST the impacts that niche, nonconventional waste streams might have from rural and urban environments following a nuclear power plant incident or detonation of a radiological dispersal device or improvised nuclear device. (authors)
Properties Important to Mixing for WTP Large Scale Integrated Testing
Large Scale Integrated Testing (LSIT) is being planned by Bechtel National, Inc. to address uncertainties in the full scale mixing performance of the Hanford Waste Treatment and Immobilization Plant (WTP). Testing will use simulated waste rather than actual Hanford waste. Therefore, the use of suitable simulants is critical to achieving the goals of the test program. External review boards have raised questions regarding the overall representativeness of simulants used in previous mixing tests. Accordingly, WTP requested the Savannah River National Laboratory (SRNL) to assist with development of simulants for use in LSIT. Among the first tasks assigned to SRNL was to develop a list of waste properties that matter to pulse-jet mixer (PJM) mixing of WTP tanks. This report satisfies Commitment 5.2.3.1 of the Department of Energy Implementation Plan for Defense Nuclear Facilities Safety Board Recommendation 2010-2: physical properties important to mixing and scaling. In support of waste simulant development, the following two objectives are the focus of this report: (1) Assess physical and chemical properties important to the testing and development of mixing scaling relationships; (2) Identify the governing properties and associated ranges for LSIT to achieve the Newtonian and non-Newtonian test objectives. This includes the properties to support testing of sampling and heel management systems. The test objectives for LSIT relate to transfer and pump out of solid particles, prototypic integrated operations, sparger operation, PJM controllability, vessel level/density measurement accuracy, sampling, heel management, PJM restart, design and safety margin, Computational Fluid Dynamics (CFD) Verification and Validation (V and V) and comparison, performance testing and scaling, and high temperature operation. The slurry properties that are most important to Performance Testing and Scaling depend on the test objective and rheological classification of the slurry (i.e., Newtonian or non-Newtonian). The most important properties for testing with Newtonian slurries are the Archimedes number distribution and the particle concentration. For some test objectives, the shear strength is important. In the testing to collect data for CFD V and V and CFD comparison, the liquid density and liquid viscosity are important. In the high temperature testing, the liquid density and liquid viscosity are important. The Archimedes number distribution combines effects of particle size distribution, solid-liquid density difference, and kinematic viscosity. The most important properties for testing with non-Newtonian slurries are the slurry yield stress, the slurry consistency, and the shear strength. The solid-liquid density difference and the particle size are also important. It is also important to match multiple properties within the same simulant to achieve behavior representative of the waste. Other properties such as particle shape, concentration, surface charge, and size distribution breadth, as well as slurry cohesiveness and adhesiveness, liquid pH and ionic strength also influence the simulant properties either directly or through other physical properties such as yield stress.
The Kramer Creek, Colorado meteorite - A new L4 chondrite
Results of bulk chemical analyses and mineralogical and petrographic studies of a chondrite found at Kramer Creek, Colorado, are reported. The meteorite has been classified as an L-group chondrite on the basis of its bulk chemistry, the fayalite content of its olivine (21.7%) and the ferrosilicate content of its pyroxene (18.3%). The presence of interstitial glass and the iron oxide percent mean deviations for olivine and low-Ca pyroxene (2.4 and 4.6%) place the specimen in petrologic group 4 of the Van Schmus and Wood classification (1967)
The Ontology of Biological Attributes (OBA)—computational traits for the life sciences
Abstract Existing phenotype ontologies were originally developed to represent phenotypes that manifest as a character state in relation to a wild-type or other reference. However, these do not include the phenotypic trait or attribute categories required for the annotation of genome-wide association studies (GWAS), Quantitative Trait Loci (QTL) mappings or any population-focussed measurable trait data. The integration of trait and biological attribute information with an ever increasing body of chemical, environmental and biological data greatly facilitates computational analyses and it is also highly relevant to biomedical and clinical applications. The Ontology of Biological Attributes (OBA) is a formalised, species-independent collection of interoperable phenotypic trait categories that is intended to fulfil a data integration role. OBA is a standardised representational framework for observable attributes that are characteristics of biological entities, organisms, or parts of organisms. OBA has a modular design which provides several benefits for users and data integrators, including an automated and meaningful classification of trait terms computed on the basis of logical inferences drawn from domain-specific ontologies for cells, anatomical and other relevant entities. The logical axioms in OBA also provide a previously missing bridge that can computationally link Mendelian phenotypes with GWAS and quantitative traits. The term components in OBA provide semantic links and enable knowledge and data integration across specialised research community boundaries, thereby breaking silos.
Chemical reaction enhanced graph learning for molecule representation
Abstract Motivation Molecular representation learning (MRL) models molecules with low-dimensional vectors to support biological and chemical applications. Current methods primarily rely on intrinsic molecular information to learn molecular representations, but they often overlook effectively integrating domain knowledge into MRL. Results In this article, we develop a reaction-enhanced graph learning (RXGL) framework for MRL, utilizing chemical reactions as domain knowledge. RXGL introduces dual graph learning modules to model molecule representation. One module employs graph convolutions on molecular graphs to capture molecule structures. The other module constructs a reaction-aware graph from chemical reactions and designs a novel graph attention network on this graph to integrate reaction-level relations into molecular modeling. To refine molecule representations, we design a reaction-based relation learning task, which considers the relations between the reactant and product sides in reactions. In addition, we introduce a cross-view contrastive task to strengthen the cooperative associations between molecular and reaction-aware graph learning. Experiment results show that our RXGL achieves strong performance in various downstream tasks, including product prediction, reaction classification, and molecular property prediction. Availability and implementation The code is publicly available at https://github.com/coder-ACAC/RLM.
Identifying local structural states in atomic imaging by computer vision
Abstract The availability of atomically resolved imaging modalities enables an unprecedented view into the local structural states of materials, which manifest themselves by deviations from the fundamental assumptions of periodicity and symmetry. Consequently, approaches that aim to extract these local structural states from atomic imaging data with minimal assumptions regarding the average crystallographic configuration of a material are indispensable to advances in structural and chemical investigations of materials. Here, we present an approach to identify and classify local structural states that is rooted in computer vision. This approach introduces a definition of a structural state that is composed of both local and nonlocal information extracted from atomically resolved images, and is wholly untethered from the familiar concepts of symmetry and periodicity. Instead, this approach relies on computer vision techniques such as feature detection, and concepts such as scale invariance. We present the fundamental aspects of local structural state extraction and classification by application to simulated scanning transmission electron microscopy images, and analyze the robustness of this approach in the presence of common instrumental factors such as noise, limited spatial resolution, and weak contrast. Finally, we apply this computer vision-based approach for the unsupervised detection and classification of local structural states in an experimental electron micrograph of a complex oxides interface, and a scanning tunneling micrograph of a defect-engineered multilayer graphene surface.
ASME Code Considerations for the Compact Heat Exchanger
The mission of the U.S. Department of Energy (DOE), Office of Nuclear Energy is to advance nuclear power in order to meet the nation's energy, environmental, and energy security needs. Advanced high temperature reactor systems such as sodium fast reactors and high and very high temperature gas-cooled reactors are being considered for the next generation of nuclear reactor plant designs. The coolants for these high temperature reactor systems include liquid sodium and helium gas. Supercritical carbon dioxide (sCO₂), a fluid at a temperature and pressure above the supercritical point of CO₂, is currently being investigated by DOE as a working fluid for a nuclear or fossil-heated recompression closed Brayton cycle energy conversion system that operates at 550°C (1022°F) at 200 bar (2900 psi). Higher operating temperatures are envisioned in future developments. All of these design concepts require a highly effective heat exchanger that transfers heat from the nuclear or chemical reactor to the chemical process fluid or the to the power cycle. In the nuclear designs described above, heat is transferred from the primary to the secondary loop via an intermediate heat exchanger (IHX) and then from the intermediate loop to either a working process or a power cycle via a secondary heat exchanger (SHX). The IHX is a component in the primary coolant loop which will be classified as "safety related." The intermediate loop will likely be classified as "not safety related but important to safety." These safety classifications have a direct bearing on heat exchanger design approaches for the IHX and SHX. The very high temperatures being considered for the VHTR will require the use of very high temperature alloys for the IHX and SHX. Material cost considerations alone will dictate that the IHX and SHX be highly effective; that is, provide high heat transfer area in a small volume. This feature must be accompanied by low pressure drop and mechanical reliability and robustness. Classic shell and tube designs will be large and costly, and may only be appropriate in steam generator service in the SHX where boiling inside the tubes occurs. For other energy conversion systems, all of these features can be met in a compact heat exchanger design. This report will examine some of the ASME Code issues that will need to be addressed to allow use of a Code-qualified compact heat exchanger in IHX or SHX nuclear service. Most effort will focus on the IHX, since the safety-related (Class A) design rules are more extensive than those for important-to-safety (Class B) or commercial rules that are relevant to the SHX.
Improved predictions of transcription factor binding sites using physicochemical features of DNA
Typical approaches for predicting transcription factor binding sites (TFBSs) involve use of a position-specific weight matrix (PWM) to statistically characterize the sequences of the known sites. Recently, an alternative physicochemical approach, called SiteSleuth, was proposed. In this approach, a linear support vector machine (SVM) classifier is trained to distinguish TFBSs from background sequences based on local chemical and structural features of DNA. SiteSleuth appears to generally perform better than PWM-based methods. Here, we improve the SiteSleuth approach by considering both new physicochemical features and algorithmic modifications. New features are derived from Gibbs energies of amino acid–DNA interactions and hydroxyl radical cleavage profiles of DNA. Algorithmic modifications consist of inclusion of a feature selection step, use of a nonlinear kernel in the SVM classifier, and use of a consensus-based post-processing step for predictions. We also considered SVM classification based on letter features alone to distinguish performance gains from use of SVM-based models versus use of physicochemical features. The accuracy of each of the variant methods considered was assessed by cross validation using data available in the RegulonDB database for 54 Escherichia coli TFs, as well as by experimental validation using published ChIP-chip data available for Fis and Lrp.
Chemistry of Apollo 12 mare basalts - Magma types and fractionation processes
Major and trace element data for a large suite of petrographically diverse Apollo 12 mare basalts are presented, and magma types sampled at the Apollo 12 site are characterized. The data confirm earlier classifications of the basalts into olivine, pigeonite, ilmenite, and feldspathic basalts. The olivine and pigeonite basalts are shown to be comagnetic and related by olivine fractionation. The other types, which differ in trace element and isotopic characteristics, are derived from different sources within the lunar interior. The spatial relations between the main basalt types are discussed in terms of local cratering events, and it is suggested that the younger ilmenite basalts overlie the olivine-pigeonite basalts. The role of olivine-dominated near-surface crystal fractionation in causing chemical variation is examined, and a relation between inferred cooling rate and the position of a sample in the fractionation sequence is determined.
Chemical characterization of a unique chondrite - Allan Hills 85085
Allan Hills 85085 is a new and very important addition to the growing list of unique carbonaceous chondrites because of its unique chemical and mineralogical properties. This chemical study provides more precise data on the major, minor, and trace element characteristics of ALH85085. ALH85085 has compositional, petrological, and isotopic affinities to AL Rais and Renazzo, and to Bencubbin-Weatherford. The similarities to Al Rais and Renazzo suggest similar formation locations and thermal processing, possibly in the vicinity of CI chondrites. Petrologic, compositional and isotopic studies indicate that the components that control the abundance of the various refractory and volatile elements were not allowed to equilibrate with the nebula as conditions changed, explaining the inconsistencies in the classification of these meteorites using known taxonomic parameters.
Probing topological phase transitions using high-harmonic generation
We report the prediction and realization of topological insulators have sparked great interest in experimental approaches to the classification of materials. The phase transition between non-trivial and trivial topological states is important, not only for basic materials science but also for next-generation technology, such as dissipation-free electronics. It is therefore crucial to develop advanced probes that are suitable for a wide range of samples and environments. Here we demonstrate that circularly polarized laser-field-driven high-harmonic generation is distinctly sensitive to the non-trivial and trivial topological phases in the prototypical three-dimensional topological insulator bismuth selenide. The phase transition is chemically initiated by reducing the spin–orbit interaction strength through the substitution of bismuth with indium atoms. We find strikingly different high-harmonic responses of trivial and non-trivial topological surface states that manifest themselves as a conversion efficiency and elliptical dichroism that depend both on the driving laser ellipticity and the crystal orientation. The origins of the anomalous high-harmonic response are corroborated by calculations using the semiconductor optical Bloch equations with pairs of surface and bulk bands. As a purely optical approach, this method offers sensitivity to the electronic structure of the material, including its nonlinear response, and is compatible with a wide range of samples and sample environments.
Relativistic theory of nuclear magnetic resonance parameters in a Gaussian basis representation
The calculation of NMR parameters from relativistic quantum theory in a Gaussian basis expansion requires some care. While in the absence of a magnetic field the expansion in a kinetically balanced basis converges for the wave function in the mean and for the energy with any desired accuracy, this is not necessarily the case for magnetic properties. The results for the magnetizability or the nuclear magnetic shielding are not even correct in the nonrelativistic limit (nrl) if one expands the original Dirac equation in a kinetically balanced Gaussian basis. This defect disappears if one starts from the unitary transformed Dirac equation as suggested by Kutzelnigg [Phys. Rev. A 67, 032109 (2003)]. However, a new difficulty can arise instead if one applies the transformation in the presence of the magnetic field of a point nucleus. If one decomposes certain contributions, the individual terms may diverge, although their sum is regular. A controlled cancellation may become difficult and numerical instabilities can arise. Various ways exist to avoid these singularities and at the same time get the correct nrl. There are essentially three approaches intermediate between the transformed and the untransformed formulation, namely, the bispinor decomposition, the decomposition of the lower component, and the hybrid unitary transformation partially at operator and partially at matrix level. All three possibilities were first considered by Xiao et al. [J. Chem. Phys. 126, 214101 (2007)] in a different context and in a different nomenclature. Their analysis and classification in a more general context are given here for the first time. Use of an extended balanced basis has no advantages and has other drawbacks and is not competitive, while the use of a restricted magnetic balance basis can be justified.
An atlas of volcanic ash
Volcanic ash samples collected from a variety of recent eruptions were studied, using petrography, chemical analyses, and scanning electron microscopy to characterize each ash type and to relate ash morphology to magma composition and eruption type. The ashes are best placed into two broad genetic categories: magnetic and hydrovolcanic (phreatomagmatic). Ashes from magmatic eruptions are formed when expanding gases in the magma form a froth that loses its coherence as it approaches the ground surface. During hydrovolcanic eruptions, the magma is chilled on contact with ground or surface waters, resulting in violent steam eruptions. Within these two genetic categories, ashes from different magma types can be characterized. The pigeon hole classification used here is for convenience; there are eruptions which are driven by both phreatic and magmatic gases.
Basaltic Fissure Types on Earth: Suitable Analogs to Evaluate the Origins of Volcanic Terrains on the Moon and Mars?
Basaltic eruptive fissures of the Great Rift and surroundings on the eastern Snake River Plain of Idaho, USA, and selected volcanic features in Hawai`i, Iceland and northern Africa were surveyed for their relevancy as planetary analogs. Evaluated during field investigations and in satellite imagery for structures, physiography, and geologic setting, fissures were categorized into four broad types: (1) simple, monogenetic fissures with obvious volcanic constructs or deposits, (2) monogenetic fissures now obscured by low shields or relatively large cones, (3) polygenetic volcanic rift zones with multiple vents and deposits, and (4) compound regional fissure systems or dike swarms that comprise major rift zones or large volcanic terrains. Using this classification as an initial base, we surveyed imagery of volcanic features for likely fissure vents in two major geologic settings on the Moon: floor-fractured craters (FFCs) and mare and cryptomare provinces. Two major regions on Mars, the volcanic plains around Alba Mons and the greater Tharsis region, were also surveyed for fissure types and volcanic associations of fissure-like features. The planetary surveys suggest that the proposed classification provides a suitable analog starting point to interpret structures associated with fissure systems on the Moon and Mars. With few exceptions, our survey indicates that each of the studied terrains exhibits a dominant fissure type. Type 1 fissures, most with pyroclastic deposits, prevail in lunar FFCs and mare-like regions; whereas type 2 fissures are ubiquitous in the Tharsis region of Mars and a few exist on the Moon as low shields. Type 3 volcanic rift zones are not common on either the Moon or Mars, although they might become evident in future work on chemically evolved terrains. Type 4 fissures are inferred in mare terrains, often represented as the extensions of major linear rille networks or rimae, with possibly complex dike swarms that were buried beneath voluminous mare basalt lava flows. Likewise, numerous flood lavas on Mars are possibly associated with now-obscured or difficult to define type 4 fissure systems.
Ligand-Based Compound Activity Prediction via Few-Shot Learning
Predicting the activities of new compounds against biophysical or phenotypic assays based on the known activities of one or a few existing compounds is a common goal in early stage drug discovery. This problem can be cast as a “few-shot learning” challenge, and prior studies have developed few-shot learning methods to classify compounds as active versus inactive. However, the ability to go beyond classification and rank compounds by expected affinity is more valuable. We describe Few-Shot Compound Activity Prediction (FS-CAP), a novel neural architecture trained on a large bioactivity data set to predict compound activities against an assay outside the training set, based on only the activities of a few known compounds against the same assay. Our model aggregates encodings generated from the known compounds and their activities to capture assay information and uses a separate encoder for the new compound whose activity is to be predicted. The new method provides encouraging results relative to traditional chemical-similarity-based techniques as well as other state-of-the-art few-shot learning methods in tests on a variety of ligand-based drug discovery settings and data sets.
Relationships between water and paddlefish Polyodon spathula dentary elemental and stable-isotopic signatures: potential application for reconstructing environmental history
The objectives of this study were to characterize relationships between water and paddlefish Polyodon spathula dentary Sr:Ca, δ 18 O and stable hydrogen isotope ratio (δD) to determine the accuracy with which individual P. spathula could be assigned to their collection locations using dentary-edge Sr:Ca, δD and δ 18 O. A laboratory experiment was also conducted to determine whether dentary Sr:Ca in age 0 year P. spathula would reflect shifts in water Sr:Ca to which fish were exposed. Significant linear relationships between water and dentary Sr:Ca, δD and δ 18 O were observed, although the relationship between water and dentary δ 18 O was weaker than those for Sr:Ca and δD. Classification success for individual fish to collection locations that differed in water Sr:Ca, δD and δ 18 O ranged from 86 to 100% based on dentary-edge Sr:Ca, δD and δ18O. Dentary Sr:Ca increased significantly in laboratory-reared age 0 year P. spathula following 4 weeks of exposure to elevated water Sr:Ca; dentary Sr:Ca of fish held in water with elevated Sr:Ca was also significantly higher than that of control fish reared in ambient laboratory water. Results indicated that P. spathula dentaries reflect water signatures for commonly-applied natural chemical markers and strongly suggest that dentary microchemistry and stable-isotopic compositions will be applicable for reconstructing P. spathula environmental history in locations where sufficient spatial differences in water chemistry occur.