Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALORIMETRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Smaller and faster: a review of conventional and nanocalorimetry techniques for determining thermophysical properties of nuclear materials

Thermal analysis of nuclear materials is critical for the advancement of nuclear technology. The heat effects associated with heat capacity, phase transformation, and radiation damage can be measured with conventional calorimeters. However, conventional calorimetric techniques are often restricted in terms of heating rate and sample mass, especially when studying the limited amounts of materials subject to extreme conditions. In this review, we summarize conventional calorimetric studies of critical thermophysical and thermochemical properties of pure actinide metals (U, Np, Am, Pu), fast reactor metallic fuel alloy systems (U–Zr, U–Pu–Zr, Pu–U, Pu–Zr), and actinide oxides that are primary constituents or transmutation products in light water reactor fuel rods (U–O, Np–O, Am–O, Pu–O, Pu–U–O). Adiabatic and drop calorimetry have been the primary techniques used for these studies, however the development of fast scanning calorimetry using micro-electro-mechanical-based systems allows determination of thermodynamic properties from smaller sample masses. We report recent investigations that leverage the fast heating rates of nanocalorimetry by itself or combined with other characterization techniques. Furthermore, we then discuss opportunities for nanocalorimetry to provide solutions to some of the technical challenges inherent in thermal analysis of nuclear materials, namely a reduction in sample activity, emulating heating transients, investigation of phase evolution in irradiated samples, and characterization of radiation damage evolution. Nanocalorimetry has the potential to significantly advance the understanding of thermophysical properties in nuclear materials and thus accelerate the development of nuclear technology.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermodynamics of radiation induced amorphization and thermal annealing of Dy 2 Sn 2 O 7 pyrochlore

Thermodynamics and annealing behavior of swift heavy ion amorphized Dy 2 Sn 2 O 7 pyrochlore were studied. Its amorphization enthalpy, defined as the total energetic difference between the irradiation amorphized and undamaged Dy 2 Sn 2 O 7 states, was determined to be 283.6 ± 6.5 kJ/mol by high temperature oxide melt drop solution calorimetry. It has been an enigma that stannate and some other pyrochlores do not follow the general r A /r B -radiation resistance relation seen in most pyrochlore systems. In this paper, we use the amorphization enthalpy, which reflects all the complex chemical and structural characteristics, as a more effective parameter to correlate the radiation damage resistance of pyrochlores with their compositions. It successfully explains the superior radiation damage resistance of the stannate pyrochlores compared with titanate pyrochlores. Differential scanning calorimetry (DSC) reveals a strong exothermic event starting at 978 K, which is attributed to long-range recrystallization based on X-ray diffraction (XRD) analysis, similar to the effect previously observed in Dy 2 Ti 2 O 7 . A second pronounced heat event beginning at ~1148 K, which results from local structural rearrangement, is clearly decoupled from the first event for irradiated Dy 2 Sn 2 O 7 . Both the heat releases measured by DSC on heating to 1023 and 1473 K, and the excess enthalpies of the annealed samples indicate that the recovery to the original, ordered state was not fully achieved up to even 1473 K, despite XRD showing the apparent restoration of crystalline pyrochlore structure. The remaining metastability may be attributed to local disorder in the form of weberite-like short-range domains in the recrystallized material. Intriguingly, the second event for different pyrochlores generally starts at similar temperatures while the onset of the long range recrystallization is compositionally dependent. Finally, the amorphization and thermal annealing behavior observed in irradiated Dy 2 Sn 2 O 7 may provide insights into the general mechanisms of radiation damage and recovery of pyrochlores relevant to their nuclear applications.

36 MATERIALS SCIENCE↗

Novel protein–protein interaction between spermidine synthase and S-adenosylmethionine decarboxylase from Leishmania donovani

Highlights: • L. donovani spermidine synthase and S-adenosylmethionine decarboxylase have been cloned and purified. • S-adenosylmethionine decarboxylase has autocatalytic property. • GST pull down assay shows the two proteins to form a metabolon. • Isothermal titration calorimetry shows that binding was exothermic having K{sub d} value of 0.4 μM. • Interaction confirmed by fluorescence spectroscopy and size exclusion chromatography. - Abstract: Polyamine biosynthesis pathway has long been considered an essential drug target for trypanosomatids including Leishmania. S-adenosylmethionine decarboxylase (AdoMetDc) and spermidine synthase (SpdSyn) are enzymes of this pathway that catalyze successive steps, with the product of the former, decarboxylated S-adenosylmethionine (dcSAM), acting as an aminopropyl donor for the latter enzyme. Here we have explored the possibility of and identified the protein–protein interaction between SpdSyn and AdoMetDc. The protein–protein interaction has been identified using GST pull down assay. Isothermal titration calorimetry reveals that the interaction is thermodynamically favorable. Fluorescence spectroscopy studies also confirms the interaction, with SpdSyn exhibiting a change in tertiary structure with increasing concentrations of AdoMetDc. Size exclusion chromatography suggests the presence of the complex as a hetero-oligomer. Taken together, these results suggest that the enzymes indeed form a heteromer. Computational analyses suggest that this complex differs significantly from the corresponding human complex, implying that this complex could be a better therapeutic target than the individual enzymes.

60 APPLIED LIFE SCIENCES↗

Accelerated growth of calcium silicate hydrates: Experiments and simulations

Despite the usefulness of isothermal calorimetry in cement analytics, without any further computations this brings only little information on the nucleation and growth of hydrates. A model originally developed by Garrault et al. is used in this study in order to simulate hydration curves of cement obtained by calorimetry with different known hardening accelerators. The limited basis set of parameters used in this model, having a physical or chemical significance, is valuable for a better understanding of mechanisms underlying in the acceleration of C-S-H precipitation. Alite hydration in presence of four different types of hardening accelerators was investigated. It is evidenced that each accelerator type plays a specific role on one or several growth parameters and that the model may support the development of new accelerators. Those simulations supported by experimental observations enable us to follow the formation of the C-S-H layer around grains and to extract interesting information on its apparent permeability.

36 MATERIALS SCIENCE↗

Early age hydration of calcium sulfoaluminate (synthetic ye'elimite, C{sub 4}A{sub 3}S{sup ¯}) in the presence of gypsum and varying amounts of calcium hydroxide

Suspensions of synthetic ye'elimite (C{sub 4}A{sub 3}S{sup ¯}) in a saturated gypsum (CS{sup ¯}H{sub 2}) and calcium hydroxide (CH) solution were examined in-situ in a wet cell by soft X-ray transmission microscopy and ex-situ by scanning electron microscopy. The most voluminous hydration product observed was ettringite. Ettringite commonly displayed acicular, filiform, reticulated, and stellate crystal habits. Additionally, pastes with C{sub 4}A{sub 3}S{sup ¯}, 15% CS{sup ¯}H{sub 2}, and varying amounts of CH were prepared and examined with X-ray diffraction (XRD) and isothermal calorimetry. The XRD experiments showed that increasing CH content caused more solid solution (SO{sub 4}{sup 2−}/OH{sup −}) AFm phases to form at early ages (< 1 d) and more monosulfate to form at later ages (> 1 d). Calorimetry indicated that the increased production of solid solution AFm was accompanied with an increase in the initial (< 30 min) rate of heat evolution, and increasing CH generally reduced the time till the second maximum rate of heat evolution due to the formation of ettringite and monosulfate.

36 MATERIALS SCIENCE↗

Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag

The use of calcium oxide (CaO) demonstrates a superior potential for the activation of ground granulated blast furnace slag (GGBFS), and it produces a higher mechanical strength than calcium hydroxide [Ca(OH){sub 2}]. The mechanical strength differences between CaO- and Ca(OH){sub 2}-activated GGBFS binders are explored using isothermal calorimetry, powder X-ray diffraction, thermogravimetric and differential thermal analysis (TGA and DTA) as well as compressive strength testing. Calcium silicate hydrate (C–S–H), Ca(OH){sub 2} and a hydrotalcite-like phase are found as reaction products in all samples. The TGA and DTA results indicate that the use of CaO produces more C–S–H, although this is not likely to be the primary cause of higher strength development in the CaO-activated GGBFS. Rather, other factors such as porosity may govern the strength at a higher order of magnitude. Significant reduction of Ca(OH){sub 2} occurs only with the use of Ca(OH){sub 2}, followed by the formation of carbonate (CaCO{sub 3}), indicating carbonation. -- Highlights: •CaO showed a better potential for the activation of GGBFS than Ca(OH){sub 2}. •Strength test, XRD, TGA/DTA and isothermal calorimetry are used. •C-S-H, Ca(OH){sub 2}, and a hydrotalcite-like phase are found in all samples. •The use of Ca(OH){sub 2} causes some degree of carbonation.

36 MATERIALS SCIENCE↗

Study on the hydration and microstructure of Portland cement containing diethanol-isopropanolamine

Diethanol-isopropanolamine (DEIPA) is a tertiary alkanolamine used in the formulation of cement grinding-aid additives and concrete early-strength agents. In this research, isothermal calorimetry was used to study the hydration kinetics of Portland cement with DEIPA. A combination of X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC)–thermogravimetric (TG) analysis and micro-Raman spectroscopy was used to investigate the phase development in the process of hydration. Mercury intrusion porosimetry was used to study the pore size distribution and porosity. The results indicate that DEIPA promotes the formation of ettringite (AFt) and enhances the second hydration rate of the aluminate and ferrite phases, the transformation of AFt into monosulfoaluminate (AFm) and the formation of microcrystalline portlandite (CH) at early stages. At later stages, DEIPA accelerates the hydration of alite and reduces the pore size and porosity.

36 MATERIALS SCIENCE↗

Impact of KOH on the interfacial precipitation rates of C-S-H during the early hydration of C3S

In this work we investigated the influence of alkalis on the hydration of two triclinic samples of C{sub 3}S. One pure C{sub 3}S and one Al-doped C{sub 3}S (0.5 wt.‐% Al{sub 2}O{sub 3}). We added differently concentrated KOH solutions representing alkalis in the pore solution, which lead to an increase of the interfacial precipitation rates of C-S-H during the hydration of C{sub 3}S compared to the hydration without KOH. Isothermal calorimetry was conducted for the determination of the rates of reaction during the hydration process and ICP-OES measurements for the determination of the pore solution composition at certain times of hydration. The increasing effect of KOH solution on the calculated interfacial precipitation rates from pore solution data can explain the enhancement of the rates of reaction recorded by heat flow calorimetry during the early hydration. Therefore, the interfacial precipitation rates of C-S-H can accurately describe the acceleration effect of alkalis on the early hydration of C{sub 3}S.

36 MATERIALS SCIENCE↗

Effect of particle size on thermodynamics and lithium ion transport in electrodes made of Ti 2 Nb 2 O 9 microparticles or nanoparticles

This study compares the charging mechanisms, thermodynamics, lithium ion transport, and operando isothermal calorimetry in lithium-ion battery electrodes made of Ti 2 Nb 2 O 9 microparticles or nanoparticles synthesized by solid-state or sol-gel methods, respectively. First, electrochemical testing showed that electrodes made of Ti 2 Nb 2 O 9 nanoparticles exhibited larger specific capacity, smaller polarization, and better capacity retention at large currents than those made of Ti 2 Nb 2 O 9 microparticles. Furthermore, potentiometric entropy measurements revealed that electrodes made of either Ti 2 Nb 2 O 9 microparticles or nanoparticles showed similar thermodynamics behavior governed by lithium intercalation in solid solution, as confirmed by in situ XRD measurements. However, electrodes made of Ti 2 Nb 2 O 9 nanoparticles featured smaller overpotential and faster lithium ion transport than those made of Ti 2 Nb 2 O 9 microparticles. In fact, operando isothermal calorimetry revealed smaller instantaneous and time-averaged irreversible heat generation rates at electrodes made of Ti 2 Nb 2 O 9 nanoparticles, highlighting their smaller resistive losses and larger electrical conductivity. Finally, the measured total heat generation over a charging/discharging cycle matched the measured net electrical energy loss. Overall, Ti 2 Nb 2 O 9 nanoparticles synthesized by the novel sol-gel method displayed excellent cycling performance and reduced heat generation as a fast-charging lithium-ion battery anode material. These features present major advantages for actual battery systems including larger energy and power densities, simpler thermal management, and enhanced safety.

25 ENERGY STORAGE↗

Kinetic, Thermodynamic, and Structural Insight into the Mechanism of Phosphopantetheine Adenylyltransferase from Mycobacterium tuberculosis

Phosphopantetheine adenylyltransferase (PPAT) catalyzes the penultimate step in the coenzyme A (CoA) biosynthetic pathway, reversibly transferring an adenylyl group from ATP to 4'-phosphopantetheine (PhP) to form dephosphocoenzyme A. This reaction sits at the branch point between the de novo pathway and the salvage pathway, and has been shown to be a rate-limiting step in the biosynthesis of CoA. Importantly, bacterial and mammalian PPATs share little sequence homology, making the enzyme a potential target for antibiotic development. A series of steady-state kinetic, product inhibition, and direct binding studies with Mycobacterium tuberculosis PPAT (MtPPAT) was conducted and suggests that the enzyme utilizes a nonrapid-equilibrium random bi-bi mechanism. The kinetic response of MtPPAT to the binding of ATP was observed to be sigmoidal under fixed PhP concentrations, but substrate inhibition was observed at high PhP concentrations under subsaturating ATP concentrations, suggesting a preferred pathway to ternary complex formation. Negative cooperativity in the kinetic response of MtPPAT to PhP binding was observed under certain conditions and confirmed thermodynamically by isothermal titration calorimetry, suggesting the formation of an asymmetric quaternary structure during sequential ligation of substrates. Asymmetry in binding was also observed in isothermal titration calorimetry experiments with dephosphocoenzyme A and CoA. X-ray structures of MtPPAT in complex with PhP and the nonhydrolyzable ATP analogue adenosine-5'-[({alpha},{beta})-methyleno]triphosphate were solved to 1.57 {angstrom} and 2.68 {angstrom}, respectively. These crystal structures reveal small conformational changes in enzyme structure upon ligand binding, which may play a role in the nonrapid-equilibrium mechanism. We suggest that the proposed kinetic mechanism and asymmetric character in MtPPAT ligand binding may provide a means of reaction and pathway regulation in addition to that of the previously determined CoA feedback.

60 APPLIED LIFE SCIENCES↗

Effects of microalloying with 3d transition metals on glass formation in AlYFe alloys

The effects of microalloying on glass formation and stability were systematically investigated by substituting 0.5 at.% of all 3d transition metals for Al in Al{sub 88}Y{sub 7}Fe{sub 5} alloys. X-ray diffraction and isothermal differential scanning calorimetry studies indicate that samples containing microadditions of Ti, V, Cr, Mn, Fe and Co were amorphous, while those alloyed with Ni and Cu were not. The onset temperatures for crystallization (devitrification) of the amorphous alloys were increased with microalloying and some showed a supercooled liquid region ({Delta}T{sub x} = T{sub x} - T{sub g}) of up to 40 C. In addition, microalloying changes the glass structure and the devitrification sequence, as determined by differential scanning calorimetry (DSC), X-ray diffraction (XRD), transmission electron microscopy (TEM), differential thermal analysis (DTA) and high energy X-ray diffraction. The results presented here suggest that the order induced in the alloy by the transition metal microaddition decreases the atomic mobility in the glass and raises the barrier for the nucleation of {alpha}-Al, the primary devitrifying phase in most cases. New intermetallic phases also appear with microalloying and vary for different transition metal additions.

36 MATERIALS SCIENCE↗

Energetics of oxidation and formation of uranium mononitride

Uranium mononitride (UN) is an advanced nuclear fuel currently being considered for use in several generation IV fast and thermal neutron spectrum core designs, with additional applications to thermal and electric nuclear propulsion reactors. Here, to better understand the thermal behavior and thermodynamic stability of UN, we investigated the bulk thermal oxidation process and thermochemical reactions, including the enthalpy of oxidation and standard enthalpy of formation, by conducting thermalgravimetric analysis – differential scanning calorimetry coupled with mass spectrometry (TGA-DSC-MS), and high temperature transposed temperature drop and oxide melt drop solution calorimetry. The bulk oxidation of UN (containing a small amount of α-UN 1.5+x ) in air was found to follow a step-wise process characterized by consecutive oxidative reactions UN-UN 1.5+x -UO 2 → UO 2 -UO 3 —N k → UO 3 —N k → UO 3 → U 3 O 8 . TGA results support that the UO 2 – U 2 N 3+x passivating layer delays the onset of rapid bulk oxidation of UN in air up to 662 K. Synchrotron X-ray diffraction (XRD) and extended X-ray absorption fine structure (EXAFS) analyses were performed to characterize UN and its final oxidized product. The standard enthalpy of formation (ΔH° f ) of UN was determined to be –144.4 ± 5.9 kJ/mol·atom, in good agreement with previously determined values from Pt encapsulation and bomb calorimetric experiments. Lastly, a negative linear correlation between ΔH° f and the N/U molar ratio was established based on the thermochemical data obtained in this work and previously reported enthalpies of formations of β-UN 1.5-x and α-UN 1.5+x .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Crystal structure, spectroscopy and thermodynamic properties of M{sup I}VWO{sub 6}(M{sup I} - Li, Na)

In the present work lithium (sodium) vanadium tungsten oxides with brannerite structure is refined by the Rietveld method (space group C2/m, Z=2). IR and Raman spectroscopy was used to assign vibrational bands and determine structural particularities. The diffuse reflectance spectra allow to calculate bandgap for M{sup I}VWO{sub 6}(M{sup I} - Li, Na). The temperature dependences of heat capacity have been measured first in the range from 7 to 350 K for these compounds and then between 330 and 640 K, respectively, by precision adiabatic vacuum and dynamic calorimetry. The experimental data were used to calculate standard thermodynamic functions, namely the heat capacity C{sub p}{sup o}(T), enthalpy H{sup o}(T)-H{sup o}(0), entropy S{sup o}(T)-S{sup o}(0) and Gibbs function G{sup o}(T)-H{sup o}(0), for the range from T->0 to 640 K. The differential scanning calorimetry was applied to measure decomposition temperature of compounds under study. - Graphical abstract: Fragment of the structure of Li(Na)VWO{sub 6}.

36 MATERIALS SCIENCE↗

The energetics of lanthanum tantalate materials

Lanthanum tantalates are important refractory materials with application in photocatalysis, solid oxide fuel cells, and phosphors. Soft-chemical synthesis utilizing the Lindqvist ion, [Ta{sub 6}O{sub 19}]{sup 8-}, has yielded a new phase, La{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2}. Using the hydrated phase as a starting material, a new lanthanum orthotantalate polymorph was formed by heating to 850 {sup o}C, which converts to a previously reported LaTaO{sub 4} polymorph at 1200 {sup o}C. The stabilities of La{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2} (LaTa-OH), the intermediate LaTaO{sub 4} polymorph (LaTa-850), and the high temperature phase (LaTa-1200) were investigated using high-temperature oxide melt solution calorimetry. The enthalpy of formation from the oxides were calculated from the enthalpies of drop solution to be -87.1{+-}9.6, -94.9{+-}8.8, and -93.1{+-}8.7 kJ/mol for LaTa-OH, LaTa-850, and LaTa-1200, respectively. These results indicate that the intermediate phase, LaTa-850, is the most stable. This pattern of energetics may be related to cation-cation repulsion of the tantalate cations. We also investigated possible LnTaO{sub 4} and Ln{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2} analogues of Ln=Pr, Nd to examine the relationship between cation size and the resulting phases. - Graphical abstract: The energetics of three lanthanum tantalates were investigated by the high-temperature oxide melt solution calorimetry. The enthalpies of formation from the oxides were calculated from the enthalpies of drop solution to be -87.1{+-}9.6, -94.9{+-}8.8, and -93.1{+-}8.7 kJ/mol for La{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2}, LaTaO{sub 4} (850 {sup o}C), and LaTaO{sub 4} (1200 {sup o}C), respectively. These results indicate that the intermediate phase, LaTaO{sub 4} (850 {sup o}C), is the most stable in energy. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic studies on lithium ferrites

Thermodynamic studies on ternary oxides of Li-Fe-O systems were carried out using differential scanning calorimetry, Knudsen effusion mass spectrometry, and solid-state electrochemical technique based on fluoride electrolyte. Heat capacities of LiFe{sub 5}O{sub 8}(s) and LiFeO{sub 2}(s) were determined in the temperature range 127-861 K using differential scanning calorimetry. Gibbs energies of formation of LiFe{sub 5}O{sub 8}(s) and LiFeO{sub 2}(s) were determined using Knudsen effusion mass spectrometry and solid-state galvanic cell technique. The combined least squares fits can be represented as {Delta}{sub f}G{sub m}{sup o}(LiFe{sub 5}O{sub 8},s,T)/kJ mol{sup -1} ({+-}6)=-2341+0.6764(T/K) (588{<=}T/K{<=}971) {Delta}{sub f}G{sub m}{sup o}(LiFeO{sub 2},s,T)/kJ mol{sup -1} ({+-}3)=-708+0.1656(T/K) (569{<=}T/K{<=}1021) The temperature independent term of the above equations represents {Delta}{sub f}H{sup o}{sub m}(T{sub av}) and temperature dependent term represents negative change in entropy of the respective compounds. Thermodynamic analysis shows that LiFe{sub 5}O{sub 8}(s) is more stable compared to LiFeO{sub 2}(s). -- Graphical abstract: Comparison of {Delta}{sub f}G{sub m}{sup o}(T) of lithium ferrites determined using different techniques. Display Omitted Highlights: {yields} Thermodynamic studies on Li-Fe-O system using DSC, KEQMS and galvanic cell. {yields} Heat capacities of LiFe{sub 5}O{sub 8}(s) and LiFeO{sub 2}(s) were determined using DSC 127-861 K. {yields} {Delta}{sub f}G{sup o}{sub m} of these compounds were determined and compared. {yields} Thermodynamic tables for LiFe{sub 5}O{sub 8}(s) and LiFeO{sub 2}(s) were constructed.

36 MATERIALS SCIENCE↗

Evidence of a transition to reorientational disorder in the cubic alkali-metal dodecahydro-closo-dodecaborates

A neutron powder diffraction and differential scanning calorimetry (DSC) study indicates that Cs{sub 2}B{sub 12}H{sub 12} undergoes a second-order phase transition near 529 K that can be described as a reorientational disordering of the B{sub 12}H{sub 12}{sup 2-} icosahedral anions between two lowest-energy configurations within the cubic structure. Such a disordering requires the addition of another mirror plane to the low-temperature Fm3-bar structural symmetry to become Fm3-bar m. Differential scanning calorimetry measurements suggest the possible persistence of some short-range anion order at and above the transition. Additional DSC measurements of the lighter alkali-metal cubic isomorphs, Rb{sub 2}B{sub 12}H{sub 12} and K{sub 2}B{sub 12}H{sub 12}, also indicate second-order transitions for these compounds near 742 K and 811 K, respectively. These results are suggestive of similar order-disorder phase changes as for Cs{sub 2}B{sub 12}H{sub 12}, although confirmation of their existence requires analogous diffraction measurements. - Graphical Abstract: Cs{sub 2}B{sub 12}H{sub 12} undergoes an order-disorder phase transition near 529 K. Similar transitions are observed for K{sub 2}B{sub 12}H{sub 12} and Rb{sub 2}B{sub 12}H{sub 12}. Highlights: > Diffraction and DSC reveal that Cs{sub 2}B{sub 12}H{sub 12} undergoes a 2nd-order phase transition near 529 K. > This phase transition is from the low-temperature Fm3-bar symmetry to Fm3-bar m at high temperatures. > DSC of Rb{sub 2}B{sub 12}H{sub 12} and K{sub 2}B{sub 12}H{sub 12} indicate 2nd-order transitions near 742 K and 811 K, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation enthalpies and heat capacities of rear earth titanates: RE{sub 2}TiO{sub 5} (RE=La, Nd and Gd)

The formation enthalpies and heat capacities of orthorhombic rare earth titanates, RE{sub 2}TiO{sub 5} (RE=La, Nd and Gd), have been studied by high temperature differential scanning calorimetry (300-1473 K) and oxide-melt solution calorimetry. The RE{sub 2}TiO{sub 5} samples are stable in enthalpy with respect to their oxides and the pyrochlore RE{sub 2}Ti{sub 2}O{sub 7} phase. The general trend that has been demonstrated in other RE-ternary systems; decreasing thermodynamic stability with decreasing R{sub A}/R{sub B} was found to be valid for the RE{sub 2}TiO{sub 5}, and their enthalpies of formation from oxides become more negative with increasing RE{sup 3+} ionic radius. - Graphical abstract: Normalized enthalpy of formation for one RE{sup 3+} cation from the oxides for several RE ternary oxide systems vs. the cation radius ratio R{sub A}/R{sub B} (A=RE, B=Ti, Zr, P). All the RE ternary oxide systems are stable relative to constituent oxides, with increasing stability as R{sub A}/R{sub B} increases. The Roman numerals above the cations represent the coordination number. Highlights: Black-Right-Pointing-Pointer Formation enthalpies and heat capacities of RE{sub 2}TiO{sub 5} (RE=La, Nd and Gd) were determined. Black-Right-Pointing-Pointer Enthalpies of formation of RE{sub 2}TiO{sub 5} from oxides become more negative with increasing RE{sup 3+} ionic radius. Black-Right-Pointing-Pointer RE{sub 2}TiO{sub 5} phases are stable in enthalpy with respect to their oxides and the pyrochlore RE{sub 2}Ti{sub 2}O{sub 7} phases. Black-Right-Pointing-Pointer Thermodynamic stability of orthorhombic RE{sub 2}TiO{sub 5} decrease with increasing R{sub B} to R{sub A} ratio.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The hydrogenation of Dy{sub 5}Pd{sub 2} followed by in situ methods

The hydrogenation behavior of the intermetallic compound Dy{sub 5}Pd{sub 2} was investigated by means of ex situ X-ray powder diffraction, in situ neutron powder diffraction and in situ differential scanning calorimetry. The structural model of Dy{sub 5}Pd{sub 2} with a palladium atom at the 32(e) position x, x, x (x Almost-Equal-To 0.22, 7/8 occupation) and a dysprosium atom at almost the same location (x Almost-Equal-To 0.18, 1/8 occupation) is confirmed. Upon heating the latter approaches x(Pd) and at T=399 K both positional parameters are indistinguishable. Dy{sub 5}Pd{sub 2} does not incorporate hydrogen (deuterium) into its crystal structure, however, starting at T=495 K reacts with hydrogen to non stoichiometric dysprosium dideuteride, DyD{sub 2+x}, following a parabolic rate law. In situ differential scanning calorimetry at various hydrogen pressures up to 2.5 MPa shows strongly exothermic signals, whose temperature onset depend on the gas pressure, corresponding to the formation of a mainly ionic hydride (DyH{sub 2+x}). - Graphical abstract: The hydrogenation of Dy5Pd2 is being followed by in situ neutron diffraction. Highlights: Black-Right-Pointing-Pointer Dy5Pd2 does not form a ternary hydride upon hydrogenation. Black-Right-Pointing-Pointer Dy5Pd2 decomposes to binary hydrides of dysprosium and palladium. Black-Right-Pointing-Pointer At T{>=}399 K Dy3 and Pd in the crystal structure of Dy5Pd2 share the same position. Black-Right-Pointing-Pointer The formation of DyD2+x at T=495 K and p(D2)=2.5 MPa follows a parabolic rate law.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗