Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Averages”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Development and Evaluation of Chemistry‐Aerosol‐Climate Model CAM5‐Chem‐MAM7‐MOSAIC: Global Atmospheric Distribution and Radiative Effects of Nitrate Aerosol

Abstract An advanced aerosol treatment, with a focus on semivolatile nitrate formation, is introduced into the Community Atmosphere Model version 5 with interactive chemistry (CAM5‐chem) by coupling the Model for Simulating Aerosol Interactions and Chemistry (MOSAIC) with the 7‐mode Modal Aerosol Module (MAM7). An important feature of MOSAIC is dynamic partitioning of all condensable gases to the different fine and coarse mode aerosols, as governed by mode‐resolved thermodynamics and heterogeneous chemical reactions. Applied in the free‐running mode from 1995 to 2005 with prescribed historical climatological conditions, the model simulates global distributions of sulfate, nitrate, and ammonium in good agreement with observations and previous studies. Inclusion of nitrate resulted in ∼10% higher global average accumulation mode number concentrations, indicating enhanced growth of Aitken mode aerosols from nitrate formation. While the simulated accumulation mode nitrate burdens are high over the anthropogenic source regions, the sea‐salt and dust modes respectively constitute about 74% and 17% of the annual global average nitrate burden. Regional clear‐sky shortwave radiative cooling of up to −5 W m −2 due to nitrate is seen, with a much smaller global average cooling of −0.05 W m −2 . Significant enhancements in regional cloud condensation nuclei (at 0.1% supersaturation) and cloud droplet number concentrations are also attributed to nitrate, causing an additional global average shortwave cooling of −0.8 W m −2 . Taking into consideration of changes in both longwave and shortwave radiation under all‐sky conditions, the net change in the top of the atmosphere radiative fluxes induced by including nitrate aerosol is −0.7 W m −2 .

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Urban Versus Lake Impacts on Heat Stress and Its Disparities in a Shoreline City

Abstract Shoreline cities are influenced by both urban‐scale processes and land‐water interactions, with consequences on heat exposure and its disparities. Heat exposure studies over these cities have focused on air and skin temperature, even though moisture advection from water bodies can also modulate heat stress. Here, using an ensemble of model simulations covering Chicago, we find that Lake Michigan strongly reduces heat exposure (2.75°C reduction in maximum average air temperature in Chicago) and heat stress (maximum average wet bulb globe temperature reduced by 0.86°C) during the day, while urbanization enhances them at night (2.75 and 1.57°C increases in minimum average air and wet bulb globe temperature, respectively). We also demonstrate that urban and lake impacts on temperature (particularly skin temperature), including their extremes, and lake‐to‐land gradients, are stronger than the corresponding impacts on heat stress, partly due to humidity‐related feedback. Likewise, environmental disparities across community areas in Chicago seen for skin temperature are much higher (1.29°C increase for maximum average values per $10,000 higher median income per capita) than disparities in air temperature (0.50°C increase) and wet bulb globe temperature (0.23°C increase). The results call for consistent use of physiologically relevant heat exposure metrics to accurately capture the public health implications of urbanization.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Impacts of climate change, population growth, and power sector decarbonization on urban building energy use

Climate, technologies, and socio-economic changes will influence future building energy use in cities. However, current low-resolution regional and state-level analyses are insufficient to reliably assist city-level decision-making. Here we estimate mid-century hourly building energy consumption in 277 U.S. urban areas using a bottom-up approach. The projected future climate change results in heterogeneous changes in energy use intensity (EUI) among urban areas, particularly under higher warming scenarios, with on average 10.1–37.7% increases in the frequency of peak building electricity EUI but over 110% increases in some cities. For each 1 °C of warming, the mean city-scale space-conditioning EUI experiences an average increase/decrease of ~14%/ ~ 10% for space cooling/heating. Heterogeneous city-scale building source energy use changes are primarily driven by population and power sector changes, on average ranging from –9% to 40% with consistent south–north gradients under different scenarios. Across the scenarios considered here, the changes in city-scale building source energy use, when averaged over all urban areas, are as follows: –2.5% to –2.0% due to climate change, 7.3% to 52.2% due to population growth, and –17.1% to –8.9% due to power sector decarbonization. Our findings underscore the necessity of considering intercity heterogeneity when developing sustainable and resilient urban energy systems.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Conduction band convergence and local structure distortion for superior thermoelectric performance of GaSb-doped n-type PbSe thermoelectrics

Achieving high-stability thermoelectric materials with excellent average power factor and figure of merit is crucial for maximizing the output power density and conversion efficiency of thermoelectric devices. In this study, GaSb is added to PbSe as an n-type dopant to form stable solid solutions. Doping with GaSb flattens the conduction band and reduces the energy difference between the Σ and L conduction bands, thereby significantly improving the Seebeck coefficient. Herein, the Ga and Sb atoms co-occupy the vacant Pb sites, unlike in the case of traditional single-element doping, as is verified by density functional theory calculations. The resultant structural distortion is confirmed via transmission electron microscopy. This local structure distortion caused by GaSb doping reduces the lattice thermal conductivity. Consequently, the Pb 0.99875 (GaSb) 0.00125 Se sample exhibits a record-high average power factor of ~22.37 μW cm −1 K −2 and a high average figure of merit of ~0.94 in the temperature range of 300‒873 K. Furthermore, the introduction of interstitial Cu and discordant Zn atoms further reduces the lattice thermal conductivity. The Pb 0.99875 (GaSb) 0.00125 Zn 0.01 Se 1.01 -0.3%Cu sample exhibits a low lattice thermal conductivity of ~0.4 W m −1 K −1 at 873 K and a record-high average figure of merit of ~1.01 in the temperature range of 300‒873 K.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Emergence of unprecedented climate change in projected future precipitation

The future time of emergence when precipitation changes due to anthropogenic influences begins to continuously exceed the previous maximum value is defined as the ‘tipping year’ Historical experiments and future experiments simulated by state-of-the-art climate models were utilized. A total of 510,000 time series from year 1856 to 2095 were generated by sampling the natural internal variability in precipitation. The time evolutions of internal variability in the whole time period were estimated from the combination of past and future experiments with preindustrial control experiments. A large ensemble size enabled an estimation of the probability density function of the tipping year at each grid point, providing precise information on the uncertainty of the projection. The tipping year of average precipitation emerges earlier in high latitudes than in lower latitudes. In some regions in lower latitudes and mid-latitudes, the tipping year of intense precipitation emerges faster than that of average precipitation. The tipping years of average and intense precipitation are earlier for higher anthropogenic forcing scenarios than for lower scenarios. The global average of the tipping year for intense precipitation might be attributed to the enhancement of the thermodynamic effect (moisture) rather than the dynamic effect (vertical motion).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Long-term survival and second malignant tumor prediction in pediatric, adolescent, and young adult cancer survivors using Random Survival Forests: a SEER analysis

Abstract Survival and second malignancy prediction models can aid clinical decision making. Most commonly, survival analysis studies are performed using traditional proportional hazards models, which require strong assumptions and can lead to biased estimates if violated. Therefore, this study aims to implement an alternative, machine learning (ML) model for survival analysis: Random Survival Forest (RSF). In this study, RSFs were built using the U.S. Surveillance Epidemiology and End Results to (1) predict 30-year survival in pediatric, adolescent, and young adult cancer survivors; and (2) predict risk and site of a second tumor within 30 years of the first tumor diagnosis in these age groups. The final RSF model for pediatric, adolescent, and young adult survival has an average Concordance index (C-index) of 92.9%, 94.2%, and 94.4% and average time-dependent area under the receiver operating characteristic curve (AUC) at 30-years since first diagnosis of 90.8%, 93.6%, 96.1% respectively. The final RSF model for pediatric, adolescent, and young adult second malignancy has an average C-index of 86.8%, 85.2%, and 88.6% and average time-dependent AUC at 30-years since first diagnosis of 76.5%, 88.1%, and 99.0% respectively. This study suggests the robustness and potential clinical value of ML models to alleviate physician burden by quickly identifying highest risk individuals.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Quantifying mean, variability, and uncertainty in indoor radon exposure in Pennsylvania using random forest and quantile regression forest models

Radon is a naturally occurring radioactive gas that poses a serious health risk as the primary cause of lung cancer in non-smokers. Despite the well-known adverse association with health outcomes, current radon exposure assessments are limited to county-level or average-level estimates, which fail to capture regional variability. This study uses Machine Learning models, including Random Forest (RF) and Quantile Regression Forest (QRF), to estimate the indoor radon concentrations at the ZCTA (Zip code tabulation area)-level and characterize uncertainties in model estimates. Incorporating geological, meteorological, and building-specific data, the models aim to improve radon risk assessment by capturing mean exposure, variability, and extreme concentration levels. Processed radon test data (n = 718,111) were analyzed using average, variability, and quantile prediction methods. Models that estimate the average radon exposure at the ZCTA-level can yield promising model-fit results, but they do not capture the underlying variability of indoor radon exposure within a ZCTA. We utilize volatility analyses to identify characteristics indicative of high variability of indoor radon exposure. We also show that a QRF model can be used to estimate upper quantiles of residential radon exposure, thereby uncovering localized areas of elevated exposure that were not apparent in mean estimates. The results highlighted the need for a deep characterization of exposure risk and show that regions with moderate average exposure levels could still harbor extreme outliers with implications for evaluating health risks. Utilizing multiple radon exposure models allows for a deeper characterization of radon risk within a geographic area and can better identify high-risk areas. The results from this study provide a foundation for developing mitigation strategies and examining associations between radon exposure and health outcomes at fine scales. Future research should extend the geographic scope and incorporate additional environmental risk factors to establish a comprehensive framework for risk assessment.

Lee, Heechan [ORNL]↗
DOE OSTI2022

The Milky Way’s middle-aged inner ring

Aims. We investigate the metallicity, age, and orbital anatomy of the inner Milky Way, specifically focussing on the outer bar region. Methods. We integrated a sample of APOGEE DR16 inner Galaxy stars in a state of the art bar-bulge potential with a slow pattern speed and investigated the link between the resulting orbits and their [Fe/H] and ages. By superimposing the orbits, we built density, [Fe/H], and age maps of the inner Milky Way, which we divided further using the orbital parameters eccentricity, |Xmax|, and |Zmax|. Results. We find that at low heights from the Galactic plane, the Galactic bar gradually transitions into a radially thick, vertically thin, elongated inner ring with average solar [Fe/H]. This inner ring is mainly composed of stars with AstroNN ages between 4 and 9 Gyr with a peak in age between 6 and 8 Gyr, making the average age of the ring ~6 Gyr. The vertical thickness of the ring decreases markedly towards younger ages. We also find very large L4 Lagrange orbits that have average solar to super-solar metallicities and intermediate ages. Lastly, we confirm a clear X-shape in the [Fe/H] and density distributions at large Galactic heights. Conclusions. The orbital structure obtained for the APOGEE stars reveals that the Milky Way hosts an inner ring-like structure between the planar bar and corotation. This structure is on average metal rich, intermediately aged, and enhances the horizontal metallicity gradient along the bar’s major axis.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Revisiting stellar properties of star-forming galaxies with stellar and nebular spectral modelling

Spectral synthesis is a powerful tool for interpreting the physical properties of galaxies by decomposing their spectral energy distributions (SEDs) into the main luminosity contributors (e.g. stellar populations of distinct age and metallicity or ionised gas). However, the impact nebular emission has on the inferred properties of star-forming (SF) galaxies has been largely overlooked over the years, with unknown ramifications to the current understanding of galaxy evolution. The objective of this work is to estimate the relations between stellar properties (e.g. total mass, mean age, and mean metallicity) of SF galaxies by simultaneously fitting the stellar and nebular continua and comparing them to the results derived through the more common purely stellar spectral synthesis approach. The main galaxy sample from SDSS DR7 was analysed with two distinct population synthesis codes: FADO, which estimates self-consistently both the stellar and nebular contributions to the SED, and the original version of STARLIGHT, as representative of purely stellar population synthesis codes. Differences between codes regarding average mass, mean age and mean metallicity values can go as high as ~0.06 dex for the overall population of galaxies and ~0.12 dex for SF galaxies (galaxies with EW(Hα) > 3 Å), with the most prominent difference between both codes in the two populations being in the light-weighted mean stellar age. FADO presents a broader range of mean stellar ages and metallicities for SF galaxies than STARLIGHT, with the latter code preferring metallicity solutions around the solar value (Z ⊙ = 0.02). A closer look into the average light- and mass-weighted star formation histories of intensively SF galaxies (EW(Hα) > 75 Å) reveals that the light contributions of simple stellar populations (SSPs) younger than ≤10 7 (10 9 ) years in STARLIGHT are higher by ~5.41% (9.11%) compared to FADO. Moreover, FADO presents higher light contributions from SSPs with metallicity ≤ Z ⊙ /200 (Z ⊙ /50) of around 8.05% (13.51%) when compared with STARLIGHT. This suggests that STARLIGHT is underestimating the average light-weighted age of intensively SF galaxies by up to ~0.17 dex and overestimating the light-weighted metallicity by up to ~0.13 dex compared to FADO (or vice versa). The comparison between the average stellar properties of passive, SF and intensively SF galaxy samples also reveals that differences between codes increase with increasing EW(Hα) and decreasing total stellar mass. Moreover, comparing SF results from FADO in a purely stellar mode with the previous results qualitatively suggests that differences between codes are primarily due to mathematical and statistical differences and secondarily due to the impact of the nebular continuum modelling approach (or lack thereof). However, it is challenging to adequately quantify the relative role of each factor since they are likely interconnected. This work finds indirect evidence that a purely stellar population synthesis approach negatively impacts the inferred stellar properties (e.g. mean age and mean metallicity) of galaxies with relatively high star formation rates (e.g. dwarf spirals, ‘green peas’, and starburst galaxies). In turn, this can bias interpretations of fundamental relations such as the mass-age or mass-metallicity, which are factors worth bearing in mind in light of future high-resolution spectroscopic surveys at higher redshifts (e.g. MOONS and 4MOST-4HS).

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Two-temperature effects in Hall-MHD simulations of the HIT-SI experiment

A two-temperature Hall-magnetohydrodynamic (Hall-MHD) model, which evolves the electron and ion temperatures separately, is implemented in the PSI-Tet 3D MHD code and used to model plasma dynamics in the Helicity Injected Torus–Steady Inductive (HIT-SI) experiment. The two-temperature model is utilized for HIT-SI simulations in both the PSI-Tet and NIMROD codes at a number of different injector frequencies in the 14.5–68.5 kHz range. At all frequencies, the NIMROD two-temperature model results in increased toroidal current, lower chord-averaged density, higher average temperatures, outward radial shift of the current centroid, and axial symmetrization of the current centroid, relative to the single-temperature NIMROD simulations. The two-temperature PSI-Tet model illustrates similar trends, but at high frequency operation, it exhibits lower electron temperature, smaller toroidal current, and decreased axial symmetrization with respect to the single-temperature PSI-Tet model. With all models, average temperatures and toroidal currents increase with the injector frequency. Power balance and heat fluxes to the wall are calculated for the two-temperature PSI-Tet model and illustrate considerable viscous and compressive heating, particularly at high injector frequency. Parameter scans are also presented for artificial diffusivity, wall temperature, and density. Both artificial diffusivity and the density boundary condition significantly modify the plasma density profiles, leading to larger average temperatures, toroidal current, and relative density fluctuations at low densities. As a result, a low density simulation achieves sufficiently high current gain (G > 5) to generate significant volumes of closed flux lasting 1–2 injector periods.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Molecular axis distribution moments in ultrafast transient absorption spectroscopy: A path toward ultrafast quantum state tomography

In ultrafast time-resolved experiments with gas phase molecules, the alignment of the molecular axis relative to the polarization of the interacting laser pulses plays a crucial role in determining the dynamics following this light–matter interaction. The molecular axis distribution is influenced by the interacting pulses and is intrinsically linked to the electronic coherences of the excited molecules. However, in typical theoretical calculations of such interactions, the signal is either calculated for a single molecule in the molecular frame or averaged over all possible molecular orientations to compare with the experiment. Such averaging removes information about anisotropy in the molecular-axis distribution, even though anisotropic contributions can play a significant role in the measured experimental signal. Here, we calculate the laboratory frame transient electronic first-order polarization [P (1) ] spectra in terms of separated molecular frame and laboratory frame quantities. The laboratory frame polarizations are compared with orientation-averaged quantum master equation calculations, demonstrating that orientation-averaging captures only the isotropic contributions. We show that our formalism also allows us to evaluate the anisotropic contributions to the spectrum. Lastly, we discuss the application of this approach to achieve ultrafast quantum state tomography using transient absorption spectroscopy and field observables in nonlinear spectroscopy.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Planar multifrequency mid-IR microwave-pumped lasers

The characteristics of planar repetitively pulsed diffusion-cooled HF, DF, HF – DF, Xe, and HF – DF – Xe(Kr) lasers pumped by a microwave discharge (2.45 GHz) are studied depending on the pump pulse duration (10 – 40 μs) and repletion rate (50 – 400 Hz), as well as on the composition and pressure of the working gas mixture (30 – 200 Torr) at low (to 0.6 L s{sup −1}) gas flow rates. It is demonstrated for the first time that a HF – DF – Xe gas-discharge laser may simultaneously operate as a HF – DF chemical molecular laser and a recombination laser based on xenon atom transitions and generate broadband (octave) radiation in the range 2.0 – 4.2 μm with an average output power of 43 mW and an efficiency of 0.9 %. With substitution of xenon for krypton, lasing in a HF – DF – Kr laser is obtained at wavelengths of 2.52 – 4.15 μm. Lasing in a HF – DF laser was achieved simultaneously in two spectral regions (2.7 – 2.9 and 3.6 – 4.2 μm) with an output power of ∼50 mW. It is found that a decrease in the pump pulse duration with a simultaneous increase in the pulse repletion rate for retaining the average energy deposition leads to an increase in the average output power and efficiency of the laser. At low pulse repetition rates (50 – 100 Hz) and a low gas mixture flow rate, helium buffer gas can be effectively substituted for neon. Operation of the Xe laser was achieved in the spectral range 2.03 – 3.65 μm with an average output power of 580 Mw at a pump pulse duration of 20 μs, a pulse repetition rate to 10 kHz, and a maximum efficiency of 55 %. The obtained experimental results demonstrate the possibility of creating broadband HF – DF – Xe lasers emitting in the frequency range 2 – 4 μm with a desired ratio of intensities in different spectral ranges. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Strongly intermittent far scrape-off layer fluctuations in Alcator C-Mod plasmas close to the empirical discharge density limit

Abstract Intermittent plasma fluctuations in the boundary region of the Alcator C-Mod device were comprehensively investigated using data time-series from gas puff imaging and mirror Langmuir probe diagnostics. Fluctuations were sampled during stationary plasma conditions in ohmically heated, lower single null diverted configurations with scans in both line-averaged density and plasma current, with Greenwald density fractions up to 0.85. Utilizing a stochastic model, we describe the plasma fluctuations as a super-position of uncorrelated pulses, with large-amplitude events corresponding to blob-like filaments moving through the scrape-off layer (SOL). A deconvolution method is used to estimate the pulse arrival times and amplitudes. The analysis reveals a significant increase of pulse amplitudes and waiting times as the line-averaged density approaches the empirical discharge density limit. Broadened and flattened average radial profiles are thus accompanied by strongly intermittent and large-amplitude fluctuations. Although these filaments are arriving less frequently at high line-averaged densities, we show that there are significant increases in radial far-SOL particle and heat fluxes which will further enhance plasma–wall interactions. The stochastic model has been used as a framework for study of the scalings in the intermittency parameter, flux and mean amplitude and waiting times, and is being used to inform predictive capability for the effects of filamentary transport as a function of Greenwald fraction.

Physics↗
DOE OSTI2024

Validation of the VUV-reflective coating for next-generation liquid xenon detectors

Abstract Coating detector materials with films highly reflective in the vacuum ultraviolet region improves sensitivity of the next-generation rare-event detectors that use liquid xenon. In this work, we investigate the MgF 2 -Al-MgF 2 coating designed to achieve high reflectance at 175 nm, the mean wavelength of liquid xenon (LXe) scintillation. The coating was applied to an unpolished, passivated copper substrate mimicking a realistic detector component of the proposed nEXO experiment, as well as to two unpassivated substrates with “high” and “average” levels of polishing. After confirming the composition and morphology of the thin-film coating using TEM and EDS, the samples underwent reflectance measurements in LXe and gaseous nitrogen (GN2). Measurements in LXe exposed the coated samples to -100°C for several hours. No peeling of the coatings was observed after several thermal cycles. Polishing is found to strongly correlate with the measured specular reflectance (R spec ). In particular, 5.8(5)% specular spike reflectance in LXe was measured for the realistic sample at 20° of incidence, while the values for similar angles of incidence on the high and average polish samples are 62.3(1.3)% and 27.4(7)%, respectively. At large angles (66°–75°), theR spec in LXe for the three samples increases to 23(5)%, 80(8)%, and 84(18)%, respectively. The R spec at around 45° was measured in both GN2 and LXe for average polish sample and shows a reasonable agreement. Importantly, the total reflectance of the samples is comparable and estimated to be 92(8)%, 85(8)%, and 83(8)% in GN2 for the realistic, average, and high polish samples, respectively. This is considered satisfactory for the next-generation LXe experiments that could benefit from using reflective films, such as nEXO and DARWIN, thus validating the design of the coating.

Instruments & Instrumentation↗
DOE OSTI2026

Heat exposure and maternal stress: evidence from the GRAPHS pregnancy cohort in Ghana

Heat exposure has been linked to psychosocial stress, an established antecedent of perinatal depression; however, evidence on heat-related stress during pregnancy in sub-Saharan Africa remains limited. We analyzed psychosocial stress scores and covariate data from the Ghana Randomized Air Pollution and Health Study, linking daily maximum and minimum shaded wet bulb globe temperature (WBGT) metrics to participants’ stress scores derived from the Crisis in Family Systems-Revised Life Events Questionnaire. We evaluated associations using ordinal logistic regression of pregnancy-average and trimester-average exposures and distributed lag non-linear models (DLNMs) to assess time-varying associations across gestation. Higher average maximum WBGT exposure across pregnancy was associated with increased odds of higher psychosocial stress; each 1 °C increase in maximum WBGT was associated with 64% higher odds of belonging to a higher stress category (OR = 1.64; 95% CI = 1.17–2.31; p = 0.0040). In trimester-average models, higher first-trimester maximum WBGT was also associated with higher stress (OR = 1.44; 95% CI = 1.15–1.81; p = 0.0014). DLNMs suggested that relatively cooler daily maximum WBGT values (25th percentile) were associated with decreased odds of stress in early pregnancy, whereas extreme daily maximum WBGT values (99th percentile) showed a pattern consistent with increased odds of stress in mid-to-late gestation. These findings highlight gestational windows in which heat exposure may influence stress, emphasizing the need for further research into underlying mechanisms and effective interventions to protect maternal mental health in heat-vulnerable settings.

White, Lewis [Columbia University] (ORCID:00090005↗
DOE OSTI2020

The turbulence driving parameter of molecular clouds in disc galaxies

ABSTRACT Supersonic turbulence plays a pivotal role during the formation of molecular clouds and stars in galaxies. However, little is known about how the fraction of compressive and solenoidal modes in the velocity field evolves over time and how it depends on properties of the molecular cloud or the galactic environment. In this work, we carry out magnetohydrodynamical simulations of disc galaxies and study the time evolution of the turbulence driving parameter for an ensemble of clouds. We find that the time-averaged turbulence driving parameter is insensitive to the position of the cloud within the galaxy. The ensemble-averaged driving parameter is found to be rather compressive with b ∼ 0.5–0.7, indicating almost time-independent global star formation properties. However, each individual cloud shows a highly fluctuating driving parameter, which would strongly affect the cloud’s star formation rate. We find that the mode of turbulence driving can rapidly change within only a few Myr, both from solenoidal to compressive and vice versa. We attribute these changes to cloud collisions and to tidal interactions with clouds or overdensities in the environment. Last, we find no significant differences in the average driving parameter between hydrodynamic and initially strongly magnetized galaxies. However, the magnetic field tends to reduce the overall fluctuation of the driving parameter. The average driving and its uncertainty are seen to be in agreement with recent constraints on the turbulence driving mode for solar neighbourhood clouds.

Körtgen, Bastian↗
DOE OSTI2021

Modelling type 1 quasar colours in the era of Rubin and Euclid

We construct a parametric SED model which is able to reproduce the average observed SDSS–UKIDSS–WISE quasar colours to within one-tenth of a magnitude across a wide range of redshift (0 < z < 5) and luminosity (–22 > M i > –29). This model is shown to provide accurate predictions for the colours of known quasars which are less luminous than those used to calibrate the model parameters, and also those at higher redshifts z > 5. Using a single parameter, the model encapsulates an up-to-date understanding of the intra-population variance in the rest-frame ultraviolet and optical emission lines of luminous quasars. At fixed redshift, there are systematic changes in the average quasar colours with apparent i-band magnitude, which we find to be well explained by the contribution from the host galaxy and our parametrization of the emission-line properties. By including redshift as an additional free parameter, the model could be used to provide photometric redshifts for individual objects. For the population as a whole we find that the average emission line and host-galaxy contributions can be well described by simple functions of luminosity which account for the observed changes in the average quasar colours across 18.1 < i AB < 21.5. Finally, we use these trends to provide predictions for quasar colours at the luminosities and redshifts which will be probed by the Rubin Observatory LSST and ESA-Euclid wide survey. The model code is applicable to a wide range of upcoming photometric and spectroscopic surveys, and is made publicly available.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Stellar populations and merger rates of brightest cluster galaxies a billion years ago: SDSS MaNGA IFU spectroscopy

ABSTRACT We investigate the spectroscopic properties of 85 brightest cluster galaxies (BCGs) and their companions observed with the SDSS MaNGA integral field unit. Galaxy redshifts are between 0.08 < z < 0.15, allowing for a field-of-view up to 80 × 80 kpc. For the main galaxies: the average age of the BCG cores is 7.66$\, \pm \,$1.36 Gyr with no significant gradient out to $2\, R_ {e}$; the average metallicity of the BCG cores is $[Z/H]=0.23\, \pm \, 0.03$ with a negative gradient of Δ[Z/H]/Δ(R/Re) = –0.14$\, \pm \, 0.09$ which flattens beyond $1.2\, R_ {e}$. Velocity dispersion gradients are mostly flat, but a few positive slopes are seen in the most massive galaxies. Emission lines are present in 12 of the BCGs, most often confined to the central $\sim 2\,$ kpc with emission line ratios well-described by a LINER or AGN excitation source. There are 78 companion galaxies identified and 9 have nebular emission lines that indicate recent star formation. The companions with flux ratios of 4:1 and 20:1 within 30 kpc of their BCG’s core are studied. The companion galaxies have a median age of 7.65$\, \pm \,$1.55 Gyr and are high-metallicity systems, with a median [Z/H] = 0.17 ± 0.07. Close spectroscopic companions with higher merging probabilities have an average merging time of 0.5 ± 0.2 Gyr. The average merger rate is 0.08$\, \pm \, 0.12 \,$ Gyr−1 for 4:1 companions and 0.26$\, \pm \, 0.22 \,$ Gyr−1 for 20:1 companions, allowing for an increase in mass of 2.3$\, \pm \,$3.4 per cent Gyr−1 and 3.5$\, \pm \,$3.2 per cent Gyr−1, respectively.

Edwards, Louise O. V. (ORCID:000000029135997X)↗