Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Archives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

The INTERSECT Open Federated Architecture for the Laboratory of the Future

A federated instrument-to-edge-to-center architecture is needed to autonomously collect, transfer, store, process, curate, and archive scientific data and reduce human-in-the-loop needs with (a) common interfaces to leverage community and custom software, (b) pluggability to permit adaptable solutions, reuse, and digital twins, and (c) an open standard to enable adoption by science facilities world-wide. The Selfdriven Experiments for Science/Interconnected Science Ecosystem (INTERSECT) Open Architecture enables science breakthroughs using intelligent networked systems, instruments and facilities with autonomous experiments, “self-driving” laboratories, smart manufacturing and artificial intelligence (AI) driven design, discovery and evaluation. It creates an open federated architecture for the laboratory of the future using a novel approach, consisting of (1) science use case design patterns, (2) a system of systems architecture, and (3) a microservice architecture.

Engelmann, Christian↗
DOE OSTI2026

Visual Systems Mapping to Define and Compare Woody Biomass LCAs for Sustainable Systems

The challenge addressed in this research centres on the need to choose between several biomass sources and energy production processes, while supporting rural economies and resilience of forest systems. A key barrier to effective decision-making for strategies using biomass is the lack of standardized and transparent life cycle assessment (LCA) baselines. These baselines are critical for assessing the impacts of biomass strategies but often vary due to regional factors and chosen simplifying assumptions of the LCAs. However, omitting key variables can mean the LCA omits key feedback and balancing loops relevant to fully assessing impacts of the change or test scenario. To address these complexities, this project employs a systems engineering approach: visual systems mapping. This technique is used to define the boundaries and dynamic behaviours of LCA baselines, enhancing transparency. By examining five literature sources and their documented baseline scenarios, the systems mapping case-studies demonstrates an approach to documenting and archiving these baselines. Recommendations are that visual systems mapping should be used to document key assumptions, such as baselines, of LCAs. Further, where possible open data repositories should hold key information about LCA baselines and reproducible workflows (e.g., using open-source tools) should be used to improve transparency and comparability in LCAs. Given the consensus within the broader scientific community on the importance of replicable data practices, this research reinforces the need for standardized frameworks and systems engineering tools in LCAs. This research demonstrates a pathway to more transparent, standardized, and comparable LCAs, that may bolster decisions for biomass systems.

Davis, Maggie [ORNL] (ORCID:0000000181319328)↗
DOE OSTI2020

Regional climate change projections from NA-CORDEX and their relation to climate sensitivity

Abstract The climate sensitivity of global climate models (GCMs) strongly influences projected climate change due to increased atmospheric carbon dioxide. Reasonably, the climate sensitivity of a GCM may be expected to affect dynamically downscaled projections. However, there has been little examination of the effect of the climate sensitivity of GCMs on regional climate model (RCM) ensembles. Therefore, we present projections of temperature and precipitation from the ensemble of projections produced as a part of the North American branch of the international Coordinated Regional Downscaling Experiment (NA-CORDEX) in the context of their relationship to the climate sensitivity of their parent GCMs. NA-CORDEX simulations were produced at 50-km and 25-km resolutions with multiple RCMs which downscaled multiple GCMs that spanned nearly the full range of climate sensitivity available in the CMIP5 archive. We show that climate sensitivity is a very important source of spread in the NA-CORDEX ensemble, particularly for temperature. Temperature projections correlate with driving GCM climate sensitivity annually and seasonally across North America not only at a continental scale but also at a local-to-regional scale. Importantly, the spread in temperature projections would be reduced if only low, mid, or high climate sensitivity simulations were considered, or if only the ensemble mean were considered. Precipitation projections correlate with climate sensitivity, but only at a continental scale during the cold season, due to the increasing influence of other processes at finer scales. Additionally, it is shown that the RCMs do alter the projection space sampled by their driving GCMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

An improved method for uranium separation from urine for rapid bioassay by inductively coupled plasma mass spectrometry

Bioassay monitoring is an important capability for any facility that works with significant amounts of radioactive material. The speed at which these analyses can be made is critical in the event of a potential exposure. Here, we present a new method that facilitates the rapid separation of uranium from a urine matrix for assay and isotopic determination by inductively coupled plasma mass spectrometry. This method is validated with archived urine samples that were previously analyzed using established, more time consuming methods. The sources of uncertainty for uranium assay and isotopic measurements are modelled using the Monte Carlo method to better understand the precision and accuracy of this method at the limit of quantification.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Chemical and structural characterization of particulate fallout isolated from air-filters

We report particulate nuclear fallout is the radioactive byproduct of a nuclear event formed by the mixture of proximate environmental materials with vaporized bomb debris. The fallout debris can be transported into the atmosphere during cloud rise, raining out locally and dispersing globally constituting a radiation hazard and contributing to the distribution of anthropogenic radionuclides in the environment. Questions remain on how entrainment of environmental material in the fireball affects fallout formation processes and radionuclide incorporation and distribution during cooling. To inform the characterization of fallout including the development of fallout size distributions and how radionuclides are incorporated into fallout debris where entrainment plays a role, we analyzed an archived historic US air-filter collected by aircraft in the aftermath of ground interacting nuclear tests. Particulate fallout collected on the filter was isolated and analyzed using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and NanoSIMS (Secondary Ion Mass Spectrometry) to determine chemistry, structure, morphology, and size of the particles. Results demonstrate that the particles isolated from the filter have spherical shape, display complex internal structures, and are mainly composed of Fe and Si oxides. In these spherical particles, Pu is preferentially associated with Fe-rich composition. The characterization of fallout particulate samples can provide information on nucleation and particle growth from the vapor phase to improve modeling and simulation of fallout hazards.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Demonstration of 151 Sm analysis using Trinity nuclear debris samples

Here, the long-lived fission product 151 Sm (T 1/2 ≈ 90 y) present in archived dissolved Trinity nuclear test debris samples was analyzed using liquid scintillation counting and the results were compared to the expected values based upon historical analysis results. The measured 151 Sm activities were found to agree with the expected values within experimental error. This demonstration validates the use of this technique in situations where the sample is too old for traditional shorter half-life radioactive fission product signatures such as 99 Mo (T 1/2 = 2.75 d), 97 Zr (T 1/2 = 16.7 h), 147 Nd (T 1/2 = 10.98 d), and 153 Sm (T 1/2 = 46.3 h), or too dilute for determining fissions through stable isotope ratio measurements.

151Sm↗
DOE OSTI2024

Cultural Shifts in High Energy Physics Collaboration from the Cold War to the Present: A Historical and Philosophical Perspective

Here, this article employs empirical history and the philosophy of science to study cultural convergences and divergences in international collaborations in high energy physics. We examine two cases: (1) E-36, an experiment on small angle proton-proton scattering conducted during the Cold War at the National Accelerator Laboratory (NAL) in the USA by Soviet and US scientists and (2) an ongoing collaborative experiment, NICA, at the Joint Institute for Nuclear Research (JINR, Dubna), which is a project devoted to heavy-ion physics. The JINR, particularly its Laboratory of High Energy Physics (formerly the “Laboratory of High Energies”) is the main mediating actor between these two cases (i.e., E-36 and NICA), as the majority of Soviet participants in E-36 were representatives of the Institute. Using empirical data collected through archival searches, field observations conducted at JINR in 2018–2019, and in-depth interviews, we tell a story of cultural differences in high energy physics by applying the concepts of ‘trading zones’ (P. Galison) and the translation of interests in actor-networks (B. Latour, M. Callon and others). We analyze three types of cultural diversity (specialization, nationality, and generational) in light of the implications of temporal context and the dichotomy between East and West, showing the roles cultural diversity plays in scientific collaboration (which is an integral part of as well as obstacle to scientific research that can nevertheless provide learning opportunities). Our study aims to demonstrate how disunity and diversity may function in scientific research and how high energy physics collaborations can remain productive despite sometimes deep divergences, including those between East and West.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference

The Additive Manufacturing Benchmark Test Series (AM Bench) provides rigorous measurement data for validating additive manufacturing (AM) simulations for a broad range of AM technologies and material systems. AM Bench includes extensive in situ and ex situ measurements, simulation challenges for the AM modeling community, and a corresponding conference series. In 2022, the second round of AM Bench measurements, challenge problems, and conference were completed, focusing primarily upon laser powder bed fusion (LPBF) processing of metals, and both material extrusion processing and vat photopolymerization of polymers. In all, more than 100 people from 10 National Institute of Standards and Technology (NIST) divisions and 21 additional organizations were directly involved in the AM Bench 2022 measurements, data management, and conference organization. The international AM community submitted 138 sets of blind modeling simulations for comparison with the in situ and ex situ measurements, up from 46 submissions for the first round of AM Bench in 2018. Analysis of these submissions provides valuable insight into current AM modeling capabilities. The AM Bench data are permanently archived and freely accessible online. The AM Bench conference also hosted an embedded workshop on qualification and certification of AM materials and components.

36 MATERIALS SCIENCE↗
DOE OSTI2025

dCache: The Storage System of Choice for Data-Intensive Applications

The ever-increasing volumes of data produced by modern scientific facilities like EuXFEL and LHC put significant stress on data management infrastructure operated by laboratories and research centers. The challenges to be addressed span the entire data life cycle, from ingest and efficient data analysis to long-term preservation, typically involving large tape libraries. dCache, a storage system developed in collaboration between the Deutsches Elektronen-Synchrotron (DESY), Fermi National Accelerator Laboratory, and Nordic e-Infrastructure Collaboration (NeIC), is designed to manage a large number of disk servers and to facilitate transparent data migration to and from archival storage. Its multifaceted approach offers a unified method to support a variety of scientific use cases with the same storage infrastructure, including high-throughput data ingest, data sharing over wide area networks, efficient access from HPC clusters, and long-term data preservation on tertiary storage. Initially developed for high energy physics (HEP) experiments, dCache is now used by various scientific communities, including astrophysics, biomedical research, and life sciences, each having specific requirements. This paper presents architecture, deployment strategies, performance and scalability enhancements, and recent advancements in dCache addressing the needs of scientific communities. Finally, we touch on the development and release process, ensuring the software’s high quality.

DCache↗
DOE OSTI2026

Optimizing a chemical cleaning protocol to determine the nickel isotopic composition of ancient seawater from carbonates

Reconstructing the ancient marine cycle of Ni, a trace metal in the oceans essential to enzymes regulating the C, N, and O cycles, would inform how Ni bioavailability shaped early life. The Ni isotopic composition of seawater (δ 60 Ni SW ) through time could provide insight, but this approach requires sedimentary archives that faithfully record δ 60 Ni SW . Carbonates are an often-used record of seawater chemistry, but contaminants could bias the measured δ 60 Ni of bulk sediment. To isolate the true carbonate-bound δ 60 Ni signal, we optimized a chemical cleaning protocol designed to minimize non‑carbonate Ni contributions and maximize carbonate recovery. We analyzed ODP Site 1007 sediments and evaluated oxidative and reductive pre-cleaning steps and carbonate dissolution protocols. Our results show that only reductive cleaning significantly altered the subsequent carbonate leachate composition, lowering Ni/Ca ratios by up to 60% and δ 60 Ni values by as much as 0.4 ‰. In contrast, δ 60 Ni values were largely insensitive to premature carbonate dissolution during pre-cleaning or to partial leaching of silicates during carbonate dissolution, even at higher acid molarities or longer reaction times. We recommend an evidence-based protocol that removes hydro-soluble salts and clays, applies reductive cleaning and oxidative cleaning for certain sample compositions, and dissolves carbonate using 0.5 M acetic acid, adjusted to pH 5. Using these results, we infer a ∼ 0.9 ‰ Ni isotopic fractionation between chemically cleaned deep-water carbonates (+0.4 ± 0.1 ‰) and deep seawater. This method development is a key step toward accurately reconstructing ancient marine Ni cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Distribution of rare earth and other critical elements in lignites from the Eocene Jackson Group, Texas

Coal is increasingly evaluated as a source of rare earth elements (REEs) in the United States to address the overreliance on imported REEs. The objective of this study was to assess the distribution of REEs in lignites from selected mining areas in the Texas Gulf Coastal Plain region. Thirty-one archived lignite and rock samples previously collected by the U.S. Geological Survey were analyzed for their rare earth element and critical mineral content. These include samples from one core (5400 and 5500 lignite horizons) and two opencast lignite mines (Gibbons Creek 3500 and 4500 horizons, and San Miguel horizons A to D) in the Eocene Jackson Group of the Texas Gulf of Mexico Coastal Plain. Some lithologies in the Gibbons Creek 3500 and 4500 lignite-bearing sections have high total rare earth, yttrium (Y), and scandium (Sc) (REYSc) values, up to 7800 ppm (ash basis) REYSc. The lignite lithologies show an enrichment in rare earths, [samarium (Sm) through gadolinium (Gd)]. The basal Gibbons Creek 3500 lignite bench shows a heavy rare earth element enrichment pattern resembling that often seen in peats through high volatile A bituminous coals. The 5500 lignite sequence, overlying the latter lignite sections, shows a light rare earth enrichment. The San Miguel lignite benches have heavy rare earth enrichments with a negative europium (Eu) anomaly.

58 GEOSCIENCES↗
DOE OSTI2022

Aggregate attack surface management for network discovery of operational technology

Interconnectivity has become a substratum of technology as the benefits of data-driven functionality are being realized in nearly all industries. Increased connectivity of Operational Technology (OT) exacerbates cyber risks because Industrial Control Systems (ICS) are becoming exposed to the Internet. These exposures are often done inadvertently through misconfigurations as additional network devices come online. Attack surface management (ASM) platforms can be used to identify vulnerabilities by performing external network discovery over the Internet using web spiders. These web spiders enable big data analytics of Internet of Things (IoT) devices as identifiable information of Internet-exposed equipment are archived in searchable databases that are made publicly available. There are a multitude of ASM service providers on the market. Here, this study was conducted to evaluate several commonly known tools to determine the aggregate attack surface of control systems. Queries were crafted by targeting commonly known manufacturers and communication protocols found in OT networks. Identified devices were that categorized based on technology types. Each query was replicated between several tools to target identical ICS equipment. Findings in this paper suggested a significant variance in the exposures discovered by each tool, but unique contributions were identified for each tool when a merged attack surface was derived. Therefore, all tools should be used in aggregate.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

A new database website for nuclear level densities

We introduce a new open-access, web-based database (http://nld.ascsn.net), Current Archive of Nuclear Density of Levels (CANDL), that hosts experimental nuclear level density (NLD) datasets from a variety of techniques and energy ranges. Built using the Dash framework in Python, the database is designed to be interactive and user-friendly, allowing researchers to search, visualize, fit, and export NLD data with minimal effort. This resource includes data extracted from evaporation spectra, Oslo method variants, and other experimental techniques that cover excitation energies beyond the neutron resonance region. The database supports on-the-fly fitting with two widely-used phenomenological models—the Constant Temperature (CT) model and the Back-Shifted Fermi Gas (BSFG) model—selected for their simplicity and computational efficiency. Future versions aim to include additional datasets and model types, as well as easy-to-use interfaces to data science techniques. Here, this platform offers a vital tool for the nuclear physics, astrophysics, medicine, and reactor design communities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Coupled effects of future rainfall and land use on urban stormwater drainage system in Tampa, Florida (USA)

Future rainfall and land use are two important factors for flood management since they both directly and indirectly affect the functionality and performance of urban stormwater drainage infrastructures. Although some studies have already examined the coupled effects of future rainfall and land use conditions, they have not concluded how such effects on both surface runoff and flood areas would change with regional surface elevation variation and infrastructure conditions. This paper analyzed the coupled effects of future rainfall and land use on urban drainage systems in terms of surface runoff quantity and flood area changes using EPA SWMM. Future downscaled and bias-corrected precipitation projections for 2040–2060 and 2080–2099 from “Downscaled CMIP3 and CMIP5 Climate and Hydrology Projections” Archive and future land use for 2050 s and 2090 s from EPA ICLUS project were used for the City of Tampa in Florida (USA). It was shown that potential runoff volume and flood area changes ranged from –40% to 160%, and –40% to 400% due to rainfall change, while potential changes induced by land use change ranged from 0% to 3.5%, and 0% to 18% respectively. Additionally, this study examined the coupled effects of future rainfall and land use changes on flood area variations, considering the capacity of drainage infrastructure and elevation variation of study site. Results showed that flood area variations are not solely influenced by runoff quantity changes due to the two external drivers, but also by other factors. Specifically, in low-relief areas with inadequate drainage infrastructure and less elevation variation, these two drivers have no additive effects on the percentage of flood area changes. In contrast, in areas with adequate drainage infrastructure and greater surface elevation variation, there are additive effects from rainfall and land use changes on flood area expansions. These findings have important implications for stakeholders involved in city planning and flooding control, particularly for urban areas facing future precipitation and urbanization challenges.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Brachiopod δ 34 S CAS microanalyses indicate a dynamic, climate-influenced Permo-Carboniferous sulfur cycle

Early isotopic studies of sulfate in carbonate minerals (carbonate associated sulfate; CAS) suggested that carbonates can provide a reliable, well-dated archive of the marine sulfur cycle through time. However, subsequent research has shown that diagenetic alteration can impose highly heterogeneous CAS sulfur isotopic compositions (δ 34 S CAS ) among different carbonate phases within sediments. Such alteration necessitates targeted sampling of well-preserved, primary carbonate phases. Here, we present a new record of Carboniferous and Early Permian brachiopod δ 34 S CAS generated from over 130 measurements of microsampled brachiopod shells. Our record refines existing brachiopod δ 34 S CAS records and confirms a large, ~6.5‰ δ 34 S CAS decrease in the Early Carboniferous. Importantly, the record also features a novel 3–5‰ increase in δ 34 S CAS near the Serpukhovian-Bashkirian boundary (323.4 Ma) that coincides with carbonate δ 13 C and δ 18 O increases. Variability in δ 34 S CAS is minor both within (≤0.3‰) and among (≤2‰) individual co-depositional brachiopod specimens. A taxon-specific δ 34 S CAS offset is present one species (Composita subtilita) that also exhibits a δ 13 C offset, supporting the existence of biological “vital effects” on δ 34 S CAS . Geologic evidence and mathematical modeling of the Permo-Carboniferous carbon and sulfur cycles suggest that changes in the burial ratio of organic carbon to pyrite sulfur (R C:S ) are insufficient to explain the observed mid-Carboniferous δ 34 S CAS record. We find that changes in the 34 S depletion of pyrite relative to seawater sulfate ( 34 ε) or in the δ 34 S of the input to the ocean (δ 34 S in ) are also needed. Large additions of O 2 from organic carbon burial during the Permo-Carboniferous cannot be entirely compensated for with sulfur cycle changes; lower than modern late Visean pO 2 and/or additional O 2 sinks are needed to keep pO 2 at plausible levels. Based on the geologic context surrounding our record's mid-Carboniferous δ 34 S CAS increase, we advocate for simultaneous changes in pyrite burial, 34 ε, and δ 34 S in , driven by sea level or tectonically induced changes in environments of sulfur burial, as a viable mechanism to produce rapid seawater δ 34 S changes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Origin of water masses in Floridan Aquifer System revealed by 81 Kr

Groundwater in coastal aquifers serves as an essential resource in densely populated areas throughout the world. However, hydrological connection to the ocean leaves it at risk of salinization via changes in climate and hydrological cycles. Therefore, an accurate hydrological characterization of coastal aquifers is of the utmost importance. Although localized salinization of shallow aquifers has commonly been studied, geochemical constraints on the time scale of regional freshwater and seawater in coastal aquifers are limited especially in carbonate aquifers. Such information is not only crucial for water resource management, but also for understanding solute flux over the land-ocean boundary and for interpreting the geochemical signatures that each water mass carries. Toward this goal, we report tracer-based, subsurface residence times of groundwater in the Floridan Aquifer System in southern Florida, which is one of the most productive aquifers on Earth. The first application of Kr 81-an emerging tracer of old groundwater-to this aquifer has identified freshwater recharge during the last glacial period as anticipated from previous studies using other geochemical tools including radiocarbon, stable isotopes and noble gas concentrations. Moreover, freshwater of Holocene age was also detected at 100 km-distance from the recharge area, suggesting the possibility of an active flow system in the upgradient region. A contribution of fossil seawater that predates the last glacial maximum was locally identified, suggesting slow seawater circulation and limited but significant solute flux from the ocean into the aquifer for dolomitization. This also implies that the deep saline coastal groundwater can potentially serve as a paleo-seawater archive.

58 GEOSCIENCES↗
DOE OSTI2022

Lignin-based jet fuel and its blending effect with conventional jet fuel

Sustainable aviation fuels (SAFs) must demonstrate specific physical and chemical properties as well as material compatibility (i.e., seal swell) to be used as an aviation turbine fuel. Several alternative jet fuels incorporated in ASTM D7566 are comprised mainly of n/iso-alkanes and can only be blended up to 50 vol% due to material compatibility and density issues. Prior work illustrated the ability of cycloalkanes to replace aromatics’s role in material compatibility. Here, we report the first archival documentation of a feedstock and chemical process to yield a product composition able to complement existing SAF ASTM D7566 annexes. A lignin-based jet fuel (LJF) blend components is generated and composed of mostly C7-C18 mono, di, and tri-cycloalkanes. The neat LJF was blended with conventional jet fuel at 10 vol% (LJF blend) to simulate an ASTM “Fast Track” evaluation process. Fuel properties that are critical to engine operability (ATSM D4054 Tier 3 & 4) were either predicted or experimental tested based on the volume availability. All LJF blend’s critical properties fall within the experience range of conventional jet fuel, with o-ring swelling exceeding the typical range of conventional fuels. Here, these results in total support the potential use of this LJF pathway to complement other SAF pathways and achieve 100% drop-in SAF.

09 BIOMASS FUELS↗