Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Aqueous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Recovery of dilute aqueous butanol by membrane vapor extraction with dodecane or mesitylene

A novel, nearly isothermal, nonselective-membrane separation process, membrane vapor extraction (MVE), efficiently recovers butanol from a dilute aqueous solution, for example, from a fermentation broth (Liu et al., 2015). In MVE, feed and solvent liquids are not in contact; they are separated by vapor. Therefore, compared to conventional extraction, MVE avoids formation of difficult-to-separate emulsions. In MVE, a semi-volatile aqueous solute (e.g., butanol) vaporizes at the upstream side of a membrane, diffuses as a vapor through the membrane pores, and subsequently condenses and dissolves into a high-boiling nonpolar solvent, favorable to the solute but not to water. Design analysis of a 1.5-m long, 30-m 2 membrane-area countercurrent MVE unit for processing 2-wt% aqueous butanol by dodecane solvent at 40 °C indicates over 90% recovery of the feed butanol with essentially no water loss and with very low energy requirement (Liu et al., 2015). The separation factor is over 1500. However, the published design study gives no experimental evidence for the calculated MVE separation. Here, we present experimental data to validate the MVE process. We use an omniphobic (i.e., hydrophobic and oleophobic), 0.2-µm pore-diameter Versapor®200 R membrane (Pall Corporation, Exton, PA) housed in a 6-cm wide by 10-cm long plate-and-frame channeled flow cell with 0.8-cm gap thickness. Membrane transfer area is 28 cm 2 . The membrane flow cell is designed for minimal axial concentration change and is operated in the transient mode between two recirculating flow loops. 2-wt% aqueous butanol is extracted into dodecane or mesitylene at 25 or 40 °C. Also, 1.5-wt% furfural is extracted into dodecane at 40 °C. Since vapor transport across the membrane contributes minimal resistance, MVE performance is governed by mass transfer through feed and solvent boundary layers. Mass-transfer coefficients are determined from the Graetz-Lévêque analysis of laminar thin-slit flow (Bird et al., 2002). Predicted extraction performance agrees well with experiment using no adjustable parameters. Finally, consistent with the initial multistage-design analysis (Liu et al., 2015), our new bench-scale experimental results confirm that MVE is a viable separation process to recover dilute semi-volatile biosolutes from water with minimal energy requirement. Preliminary analysis of downstream solute recovery from the extract via distillation is more efficient than that for pervaporation because of insignificant water carry over through the MVE membrane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Understanding Adsorption and Reactions at Aqueous Oxide Interfaces with Neural Network Potential Molecular Dynamics

Chemical processes at metal oxide−water interfaces are of central importance in geochemistry, biology, and energy technologies. A better understanding of these processes would allow us to make a significant step toward optimizing and controlling them, which could in turn lead to broader impacts. Computational modeling is indispensable to accomplishing this task because complexity and disorder often make it difficult to extract atomistic information from experiments. Balancing computational cost and accuracy, simulation schemes based on efficient machine learning representations of the potential energy surface (PES) predicted by ab initio calculations have become increasingly popular over the past decade. In particular, several studies have demonstrated the ability of machine learning models to accurately reproduce the complex ab initio PESs of aqueous oxide interfaces, allowing simulations of systems and processes that are not accessible with ab initio methods. In this Account, we review our recent efforts to understand adsorption processes and reactions at aqueous oxide interfaces using deep potential molecular dynamics (DPMD), a simulation scheme employing deep neural networks (DNNs), which has proven to be quite successful in accurately describing many different systems in the condensed phase. After summarizing the DPMD methodology, we first review our work on the acid−base chemistry of oxide surfaces in contact with water, a fundamental characteristic that controls proton transfer and surface charge at the interface. We focus on the aqueous interface of rutile IrO 2 , an oxide material thus far considered the best catalyst for the oxygen evolution reaction (OER). We show that this interface is characterized by a large fraction of dissociated water and a strong Brønsted acidity of the surface sites, in good agreement with the experimentally measured value of the point of zero proton charge. In our second example, we investigate how the adsorption of organic species from ambient air or water affects the structure and wettability of the aqueous interfaces of TiO 2 , a prototypical photocatalytic material. This is a question that is relevant to understanding the UV-induced hydrophilicity of TiO 2 surfaces, a property at the basis of self-cleaning windows and related applications. Specifically focusing on formic and acetic acids, the two most common atmospheric organic acids, our simulations reveal that these acids control the wettability of TiO 2 largely through acid−base chemistry at the interface rather than chemisorption on the oxide surface, a finding that could help improve the design of self-cleaning surfaces and photocatalytic devices. Finally, we review our recent study of methanol at TiO 2 −water interfaces, a system whose interest is largely motivated by the role of methanol in enhancing photocatalytic hydrogen evolution on TiO 2 . Our simulations provide mechanistic insights into the coupled roles of the organic adsorbate and water at the TiO 2 interface, with implications for how methanol enhances the activity of H 2 evolution.

adsorption↗
DOE OSTI2021

Toward the Understanding of the Reaction Mechanism of Zn/MnO2 Batteries Using Non-alkaline Aqueous Electrolytes

Zn/MnO 2 systems using non-alkaline aqueous electrolytes have attracted tremendous interest as rechargeable aqueous Zn ion batteries due to their safety and high specific capacities. Despite their promising electrochemical performance, however, their reaction mechanism has remained elusive. Here in this paper, we examined the structural evolution of cryptomelane α-MnO 2 cathode by ex situ transmission electron microscopy after electrochemical testing using two different non-alkaline aqueous Zn electrolytes with acetate and triflate salts of different pH values. We have discovered that the systems tested in both electrolytes exhibit a dissolution–deposition reaction mechanism through dissolution–deposition of Mn 2+ ions from/on the cathodes with a display of similar discharge/charge product formation. We have also found that the cell tested using the acetate electrolyte shows evidence of structural irreversibility that might contribute to its rapid capacity degradation. This finding offers an important insight into optimizing the cathode design for enhanced electrochemical function of aqueous Zn/MnO 2 batteries.

25 ENERGY STORAGE↗
DOE OSTI2018

Calcium Ion Bridging of Aqueous Carboxylates onto Silica: Implications for Low-Salinity Waterflooding

Release of crude oil from reservoir rock by low-salinity waterflooding is thought to occur by decreasing the advancing crude oil/brine/rock water contact angle to depin three-phase contact lines (i.e., by increasing reservoir water wettability). Crude oil likely adheres locally to reservoir rock asperities by deposition of asphaltene agglomerates formed at the crude oil/brine interface, following collapse of protective water films. One mechanism proposed for asphaltene adhesion and subsequent release is ion bridging of asphaltenic carboxylate groups protruding through molecularly thin water layers to calcium-occupied rock surface exchange sites, the so-called multicomponent ion exchange mechanism. To our knowledge, however, no experimental evidence directly establishes divalent cation bridging of aqueous carboxylates to anionic mineral surfaces. Using a quartz crystal microbalance with dissipation, we measure adsorption of aqueous carboxylates (benzoate, pentanoate, and hexanoate) onto silica, with and without calcium ion present at near-neutral pH. We find little to no adsorption on a silica surface to within the detection limit of our measurement (±1 Hz, 0.18 mg/m 2 ). Modeling of the silica surface chemistry, using classical ion-complexing triple-layer formalism, reveals that less than 10% of surface-hydroxylated sites actually ionize at pH 7. Of these, not all bind calcium ions. Accordingly, the calcium ion surface density is insufficient to reverse the negative surface charge of silica or to promote significant ion bridging of aqueous carboxylates. In so far as aqueous-soluble carboxylic acids mimic those incorporated in crude oil asphaltenes, we conclude that calcium ion bridging alone does not adhere asphaltenes to silica surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Water Defect Stabilizes the Bi 3+ Lone-Pair Electronic State Leading to an Unusual Aqueous Hydration Structure

In this work, the aqueous hydration structure of Bi 3+ is probed using a combination of extended X-ray absorption fine structure (EXAFS) spectroscopy and density functional theory (DFT) simulations of ion-water clusters and of condensed-phase solutions. Anomalous features in the EXAFS spectra are found to be associated with a highly asymmetric first-solvent water shell. The aqueous chemistry and structure of the Bi 3+ ion is dramatically controlled by the water stabilization of a lone-pair electronic state involving the mixed 6s and 6p orbitals. This leads to a distinct multi-modal distribution of waters in the first shell that are separated by about 0.2Å. The lone-pair structure is stabilized by a collective response of multiple waters that are localized near the lone-pair anti-bonding site. The findings indicate that the lone-pair stereochemistry of aqueous Bi 3+ plays a major role in the binding of water and ligands in aqueous solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Transport and Energetics of Carbon Dioxide in Ionic Liquids at Aqueous Interfaces

A major hurdle in utilizing carbon dioxide (CO 2 ) lies in separating it from industrial flue gas mixtures and finding suitable storage methods that enable its application in various industries. To address this issue, we utilized a combination of molecular dynamics simulations and experiments to investigate the behavior of CO 2 in common room-temperature ionic liquids (RTIL) when in contact with aqueous interfaces. Here, our investigation of RTILs, [EMIM][TFSI] and [OMIM][TFSI], and their interaction with a pure water layer mimics the environment of a previously developed ultrathin enzymatic liquid membrane for CO 2 separation. We analyzed diffusion constants and viscosity, which reveals that CO 2 molecules exhibit faster mobility within the selected ILs compared to what would be predicted solely based on the viscosity of the liquids using the standard Einstein–Stokes relation. Moreover, we calculated the free energy of translocation for various species across the aqueous–IL interface, including CO 2 and HCO 3 – . Free energy profiles demonstrate that CO 2 exhibits a more favorable partitioning behavior in the RTILs compared to that in pure water, while a significant barrier hinders the movement of HCO 3 – from the aqueous layer. Experimental measurement of the CO 2 transport in the RTILs corroborates the model. These findings strongly suggest that hydrophobic RTILs could serve as a promising option for selectively transporting CO 2 from aqueous media and concentrating it as a preliminary step toward storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

High-Level VSCF/VCI Calculations Decode the Vibrational Spectrum of the Aqueous Proton

We report that the hydrated excess proton is a common species in aqueous chemistry which complexes with water in a variety of structures. The infrared spectrum of the aqueous proton is particularly sensitive to this array of structures, which manifests as continuous IR absorption from 1000-3000 cm -1 known as the “proton continuum”. Because of the extreme breadth of the continuum and strong anharmonicity of the involved vibrational modes, this spectrum has eluded straightforward interpretation and simulation. Using protonated water hexamer clusters from reactive molecular dynamics trajectories, and focusing on their central H + (H 2 O) 2 structures’ spectral contribution, we reproduce the linear IR spectrum of the aqueous proton with a high-level local- monomer quantum method and highly accurate many-body potential energy surface. The accuracy of this approach is first verified in the vibrational spectra of the two isomers of the protonated water hexamer in the gas phase. We then apply this approach to 800 H + (H 2 O) 6 clusters, also written as [H + (H 2 O) 2 ](H 2 O) 4 , drawn from MS-EVB simulations of the bulk liquid to calculate the infrared spectrum of the aqueous proton complex. Incorporation of anharmonic effects to the vibrational potential and quantum mechanical treatment of the proton produce better agreement to the infrared spectrum compared to the double-harmonic approximation. We assess the correlation of the pro- ton stretching mode with different atomistic coordinates, finding the best correlation with $\langle$ROH$\rangle$, the expectation value of the proton-oxygen distance ROH. Finally, we also decompose the IR spectrum based on normal mode vibrations and $\langle$ROH$\rangle$ to provide insight on how different frequency regions in the continuum report on different configurations, vibrational modes, and mode couplings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Potential of Zero Charge and Its Temperature Derivative for Au(111) Electrode|Alkanethiol SAM|1.0 M Aqueous Electrolyte Solution Interfaces: Impact of Electrolyte Solution Ionic Strength and Its Effect on the Structure of the Modified Electrode|Electrolyte Solution Interface

In this study, we demonstrate how small and rapid temperature perturbations (produced by the indirect laser-induced temperature jump (ILIT) technique) of solid metal electrode|electrolyte solution interfaces may be used to determine the potential of zero (total) charge (E pzc ) and its temperature derivative $$\left(\frac{dEpzc}{dT}\right)$$ of Au(111) electrode surfaces modified by alkanethiol self-assembled monolayers in contact with high ionic strength (i.e., 1.0 M) aqueous electrolyte solutions. The E pzc ’s measured for two different types of SAMs (made from either HS(CH 2 ) n-1 CH 3 (5 ≤ n ≤ 12, E pzc = -(0.99 ± 0.12) V vs SSCE) or HS(CH 2 ) n OH (3 ≤ n ≤ 16, E pzc = (0.46 ± 0.22) V vs SSCE)) are considerably different than those measured previously at much lower electrolyte solution ionic strengths. For mixed monolayers made from both HS(CH 2 ) n-1 CH 3 and HS(CH 2 ) n Fc (where Fc refers to ferrocene), the difference in Epzc decreases as a function of the surface concentration of the Fc moiety (i.e., [Fc]), and it completely disappears at a surprisingly small [Fc] (~4.0 × 10 –11 mol cm –2 ). These observations for the Au(111)|hydrophobic (neat and mixed) SAM|aqueous electrolyte solution interfaces, along with the surface potentials (g S ml(dip)) evaluated for the contacting electrolyte solution surfaces of these interfaces, are consistent with a structure for the water molecule components of these surfaces where there is a net orientation of the dipoles of these molecules. Accordingly, the negative (oxygen) ends of these molecules point toward the SAM surface. The positive values of g S ml(dip) evaluated for hydrophilic SAM (e.g., made from HS(CH 2 ) n OH)|aqueous electrolyte solution interfaces) also indicate that the structure of these interfaces is similar to that of the hydrophobic interfaces. However, g S ml(dip) decreases with increasing ionic strength for the hydrophilic interfaces, while it increases with increasing ionic strength for the hydrophobic interfaces. The data (and calculations) reported in the present work and other studies of hydrophobic (and hydrophilic)|aqueous solution interfaces are as yet insufficient to support a complete explanation for the effects of ionic strength observed in the present study. Nevertheless, an analysis based upon the value of $$\left(\frac{dEpzc}{dT}\right)$$ (= (0.51 ± 0.12) mV/K, essentially the same for SAMs made from both HS(CH 2 ) n-1 CH 3 and HS(CH 2 ) n OH), determined in the present study provides a further indication that upon formation of the SAM there is a partial charge transfer of electrons from the relevant gold atoms on the Au(111) surface to the sulfur atoms of the alkanethiols.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Ru-Sn/AC for the Aqueous-Phase Reduction of Succinic Acid to 1,4-Butanediol under Continuous Process Conditions

Succinic acid is a biomass-derived platform chemical that can be catalytically converted in the aqueous phase to 1,4-butanediol (BDO), a prevalent building block used in the polymer and chemical industries. Despite significant interest, limited work has been reported regarding sustained catalyst performance and stability under continuous aqueous-phase process conditions. As such, this work examines Ru-Sn on activated carbon (AC) for the aqueous-phase conversion of succinic acid to BDO under batch and flow reactor conditions. Initially, powder Ru-Sn catalysts were screened to determine the most effective bimetallic ratio and provide a comparison to other monometallic (Pd, Pt, Ru) and bimetallic (Pt-Sn, Pd-Re) catalysts. Batch reactor tests determined that a ~1:1 metal weight ratio of Ru to Sn was effective for producing BDO in high yields, with complete conversion resulting in 82% molar yield. Characterization of the fresh Ru-Sn catalyst suggests that the sequential loading method results in Ru sites that are colocated and surface-enriched with Sn. Postbatch reaction characterization confirmed stable Ru-Sn material properties; however, upon a transition to continuous conditions, significant Ru-Sn/AC deactivation occurred due to stainless steel leaching of Ni that resulted in Ru-Sn metal crystallite restructuring to form discrete Ni-Sn sites. Computational modeling confirmed favorable energetics for Ru-Sn segregation and Ni-Sn formation at submonolayer Sn incorporation. To address stainless steel leaching, reactor walls were treated with an inert silica coating by chemical vapor deposition. With leaching reduced, stable Ru-Sn/AC performance was observed that resulted in a molar yield of 71% BDO and 15% tetrahydrofuran for 96 h of time on stream. Postreaction catalyst characterization confirmed low levels of Ni and Cr deposition, although early-stage islanding of Ni-Sn will likely be problematic for industrially relevant time scales (i.e., thousands of hours). Overall, these results (i) demonstrate the performance of Ru-Sn/AC for aqueous phase succinic acid reduction, (ii) provide insight into the Ru-Sn bimetallic structure and deactivation in the presence of leached Ni, and (iii) underscore the importance of compatible reactor metallurgy and durable catalysts.

09 BIOMASS FUELS↗
DOE OSTI2026

The Stability of Nd Hydroxyl Complexes at Near Neutral to Alkaline pH from 25 to 75 °C: Implications for Monazite Solubility in Hydrothermal Aqueous Fluids

Speciation of rare earth elements (REE) in aqueous fluids controls their mobilization during fluid-rock interaction. Thermodynamic modeling provides important insights into the factors controlling REE mobility and fractionation in aqueous fluids, in which aqueous REE hydroxyl complexes are particularly important across a broad pH range. However, the stability of these REE hydroxyl complexes remains poorly determined due to limited experimental data above ambient temperature. In this work, UV–vis spectrophotometry experiments were conducted to determine the cumulative hydrolysis constants for neodymium (Nd) from 25 to 75 °C in near-neutral to alkaline solutions. The color indicator m -cresol purple was used to determine in situ pH. Alkaline NaOH-bearing aqueous solutions were doped with varying initial Nd concentrations (0 to ∼0.155 mmol/kg), which resulted in the release of protons (H + ) and pH decrease during hydrolysis of Nd 3+ according to Nd 3+ + n H 2 O = Nd(OH) n 3– n + H + . The average OH – ligand number coordinated to Nd 3+ was found to increase from 1.0 to 1.6 at 25 °C and from 1.2 to 2.8 at 75 °C over a pH range from 6.3 to 9.0. The measured speciation shows an increased predominance of Nd(OH) 3 0 over the Nd(OH) 2 + and Nd(OH) 2+ species with increased temperature and pH. The increasing cumulative formation constants (log*β° n , n = 1 to 3) retrieved from 25 to 75 °C differ by 0.1 to 1.9 logarithmic units in comparison to existing thermodynamic databases. These updated thermodynamic data have important implications for geochemical modeling of the speciation of Nd hydroxyl complexes and the solubility of monazite as a function of pH.

58 GEOSCIENCES↗
DOE OSTI2025

Optimizing CO 2 -Loaded Aqueous Amine Solutions for Higher Electrocatalytic CO 2 Reduction Activity

The activity of aqueous-based carbon dioxide reduction (CO 2 R) reactions is often limited by the solubility of CO 2 . The addition of amines can increase the total dissolved carbon in water through the formation of bicarbonate and carbamate species, which has been used to a great effect to capture CO 2 from dilute streams. Here, in this study, we explore the effect of 12 primary and secondary amines of varying Brønsted basicity, steric profile, and hydrogen-bonding capabilities on the aqueous CO 2 R to CO activity of a molecular Ni(cyclam)Cl 2 catalyst with a Hg electrode. Addition of some of the amines results in greater activity and selectivity for CO production compared to equivalent aqueous solutions without added amines. Under optimal conditions (0.4 M 3-amino-propionitrile), there is an over sevenfold increase in partial current density and greater selectivity for CO compared to equivalent conditions with no amine. Interestingly, the increase in activity did not correlate to any single property across the 12 amines. To elucidate the effect of the amine additives on catalysis, we used vapor–liquid equilibrium modeling (VLE), 13 C NMR spectroscopy, and computational analysis to determine the carbon speciation of the solutions. These results indicate that for amines without ethylalcohol functionalities, CO 2 R activity correlates with carbamate concentration, which is in turn governed by amine basicity and steric effects. However, this correlation does not persist for amines with ethylalcohol functionalities, which can form more stable carbamates through intramolecular-hydrogen bonding. These studies demonstrate that amine additives can enhance aqueous CO 2 R activity and selectivity and describe amine properties that lead to these higher performance metrics.

Amines↗
DOE OSTI2019

Iron(III) Speciation Observed at Aqueous and Glycerol Surfaces: Vibrational Sum Frequency and X-ray

Aqueous solutions of FeCl 3 have been widely studied to shed light on a number of processes from dissolution, mineralization, biology, electrocatalysis, corrosion, to microbial biomineralization. Yet there are little to no molecular level studies of the air–liquid FeCl 3 interface. Here, both aqueous and glycerol FeCl 3 solution surfaces are investigated with polarized vibrational sum frequency generation (SFG) spectroscopy. We also present the first ever extreme ultraviolet reflection–absorption (XUV-RA) spectroscopy measurements of solvated ions and complexes at a solution interface, and observe with both X-ray photoelectron spectroscopy (XPS) and XUV-RA the existence of Fe(III) at the surface and in the near surface regions of glycerol FeCl 3 solutions, where glycerol is used as a high vacuum compatible proxy for water. XPS showed Cl - and Fe(III) species with significant Fe(III) interfacial enrichment. In aqueous solutions, an electrical double layer (EDL) of Cl - and Fe(III) species at 0.5 m FeCl 3 concentration is observed as evidenced from an enhancement of molecular ordering of water dipoles, consistent with the observed behavior at the glycerol surface. At higher concentrations in water, the EDL appears to be substantially repressed, indicative of further Fe(III) complex enrichment and dominance of a centrosymmetric Fe(III) species that is surface active. In addition, a significant vibrational red-shift of the dangling OH from the water molecules that straddle the air–water interface reveals that the second solvation shell of the surface active Fe(III) complex permeates the topmost layer of the aqueous interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Structural water and disordered structure promote aqueous sodium-ion energy storage in sodium-birnessite

Abstract Birnessite is a low-cost and environmentally friendly layered material for aqueous electrochemical energy storage; however, its storage capacity is poor due to its narrow potential window in aqueous electrolyte and low redox activity. Herein we report a sodium rich disordered birnessite (Na 0.27 MnO 2 ) for aqueous sodium-ion electrochemical storage with a much-enhanced capacity and cycling life (83 mAh g −1 after 5000 cycles in full-cell). Neutron total scattering and in situ X-ray diffraction measurements show that both structural water and the Na-rich disordered structure contribute to the improved electrochemical performance of current cathode material. Particularly, the co-deintercalation of the hydrated water and sodium-ion during the high potential charging process results in the shrinkage of interlayer distance and thus stabilizes the layered structure. Our results provide a genuine insight into how structural disordering and structural water improve sodium-ion storage in a layered electrode and open up an exciting direction for improving aqueous batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Production of fast-charge Zn-based aqueous batteries via interfacial adsorption of ion-oligomer complexes

Abstract Aqueous zinc batteries are attracting interest because of their potential for cost-effective and safe electricity storage. However, metallic zinc exhibits only moderate reversibility in aqueous electrolytes. To circumvent this issue, we study aqueous Zn batteries able to form nanometric interphases at the Zn metal/liquid electrolyte interface, composed of an ion-oligomer complex. In Zn||Zn symmetric cell studies, we report highly reversible cycling at high current densities and capacities (e.g., 160 mA cm −2 ; 2.6 mAh cm −2 ). By means of quartz-crystal microbalance, nuclear magnetic resonance, and voltammetry measurements we show that the interphase film exists in a dynamic equilibrium with oligomers dissolved in the electrolyte. The interphase strategy is applied to aqueous Zn||I 2 and Zn||MnO 2 cells that are charged/discharged for 12,000 cycles and 1000 cycles, respectively, at a current density of 160 mA cm −2 and capacity of approximately 0.85 mAh cm −2 . Finally, we demonstrate that Zn||I 2 -carbon pouch cells (9 cm 2 area) cycle stably and deliver a specific energy of 151 Wh/kg (based on the total mass of active materials in the electrode) at a charge current density of 56 mA cm −2 .

25 ENERGY STORAGE↗
DOE OSTI2025

Nitrogen- and oxygen-rich organic material indicative of polymerization in pre-aqueous cryochemistry on Bennu’s parent body

Nitrogen-containing organic compounds play key biological roles, and their identification in primitive astromaterials such as meteorites can shed light on the origin of life. However, meteorites are typically contaminated by uncontrolled exposure to Earth. Here we show that pristine samples returned from asteroid Bennu contain polymeric organics exceptionally rich in nitrogen and oxygen. These polymers contain a variety of functional groups including amines, amides, N-heterocycles, and aliphatic and aromatic hydrocarbons, among others. They are seen in a carbonaceous vein with mineral inclusions and in multilayered organic sheets. Their morphology and composition indicate formation from pre-aqueous N-rich precursors and later modification during aqueous alteration. These findings demonstrate that asteroids like Bennu contain complex nitrogen-rich organic phases formed by pre-aqueous and aqueous processes, and they expand the known inventory of potential prebiotic extraterrestrial compounds.

Sandford, Scott A↗
DOE OSTI2024

Zn 2+ -mediated catalysis for fast-charging aqueous Zn-ion batteries

Rechargeable aqueous zinc-ion batteries (AZIBs), renowned for their safety, high energy density and rapid charging, are prime choices for grid-scale energy storage. Historically, ion-shuttling models centring on ion-migration behaviour have dominated explanations for charge/discharge processes in aqueous batteries, like classical ion insertion/extraction and pseudocapacitance mechanisms. However, these models struggle to account for the exceptional performance of AZIBs compared to other aqueous metal-ion batteries. Here, in this study, we present a catalysis model elucidating the Zn 2+ anomaly in aqueous batteries, explaining it through the concept of adsorption in catalysis. Such behaviour can serve the charge/discharge role, predominantly dictated by solvated metal cations and cathode materials. First-principles calculations suggest optimal adsorption/desorption behaviour (water dissociation process) with the Zn 2+ -vanadium nitride (VN) combination. Experimentally, AZIBs implementing VN cathodes demonstrate fast-charging kinetics, showing a capacity of 577.1 mAh g -1 at a current density of 300,000 mA g -1 . The grasp of catalysis steps within AZIBs can drive solutions beyond state-of-the-art fast-charging batteries.

25 ENERGY STORAGE↗
DOE OSTI2013

Performance of a Microfluidic Device for In Situ ToF-SIMS Analysis of Selected Organic Molecules at Aqueous Surfaces

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) is a unique surface analysis technique because it can provide molecular recognition for organic and biological molecules. However, analyzing aqueous solution surfaces by ToF-SIMS is difficult, because ToF-SIMS is a high-vacuum technique, while the vapor pressure of water is about 2.3 kPa at room temperature (20 C). We designed and fabricated a self-contained microfluidic device, enabling in situ analysis of aqueous surfaces by scanning electron microscope (SEM) and ToF-SIMS, which has been briefly reported.1,2 In this study, we report more performance data, focusing on the performance of this device for in situ analysis of organic molecules at aqueous surfaces using ToF-SIMS. Three representative organic compounds (formic acid, glycerol, and glutamic acid) were tested, and their molecular signals were successfully observed. The device can be self-running in vacuum for 8 hours, and SIMS measurements are feasible at any time in this time range. The stability of this device under primary ion beam bombardment is also impressive. High fluence (6 × 1012 ions cm-2 s-1) measurements can be operated continuously for up to 30 minutes without any significant damage to the aperture. However, extra-high fluence measurements (>1 × 1014 ions cm-2 s-1) may lead to liquid bumping in the aperture, and the aqueous solutions may spread out quickly. Signal reproducibility is reasonably good, and relative standard deviation (RSD) for molecular ion signals can be controlled to be smaller than ±15% for consecutive measurements. Measurements at long time intervals (e.g., 60 min) show RSDs of ±40-50%. In addition, the detection limits of formic acid, glycerol, and glutamic acid are estimated to be 0.04%, 0.008%, and 0.002% (weight ratio), respectively.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2014

Pathways to low-cost electrochemical energy storage: a comparison of aqueous and nonaqueous flow batteries

Energy storage is increasingly seen as a valuable asset for electricity grids composed of high fractions of intermittent sources, such as wind power or, in developing economies, unreliable generation and transmission services. However, the potential of batteries to meet the stringent cost and durability requirements for grid applications is largely unquantified. We investigate electrochemical systems capable of economically storing energy for hours and present an analysis of the relationships among technological performance characteristics, component cost factors, and system price for established and conceptual aqueous and nonaqueous batteries. We identified potential advantages of nonaqueous flow batteries over those based on aqueous electrolytes; however, new challenging constraints burden the nonaqueous approach, including the solubility of the active material in the electrolyte. Requirements in harmony with economically effective energy storage are derived for aqueous and nonaqueous systems. The attributes of flow batteries are compared to those of aqueous and nonaqueous enclosed and hybrid (semi-flow) batteries. Flow batteries are a promising technology for reaching these challenging energy storage targets owing to their independent power and energy scaling, reliance on facile and reversible reactants, and potentially simpler manufacture as compared to established enclosed batteries such as lead–acid or lithium-ion.

25 ENERGY STORAGE↗