Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Algebraic structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Supersonic turbulent flow past a swept compression corner at Mach 3. II

The three-dimensional Mach 3.0 shock wave-turbulent boundary layer interaction generated by a swept compression corner whose geometry is characterized by the angle of streamwise compression angle alpha and the angle of sweep lambda is presently treated by the Baldwin-Lomax (1978) algebraic turbulent eddy viscosity model. The results obtained, and those previously derived by means of Cebeci and Smith (1974) and Jones and Launder (1972) models, are compared with experimental measurements. The rate of change of the mean kinetic energy along a streamline is investigated, and evidence is obtained that the flowfield structure is rotational and inviscid.

Knight, Doyle D.↗
NASA NTRS1989

Some Navier-Stokes calculations for the CAST-10 airfoil

Results of the simulation of the viscous flow past the CAST-10 airfoil were shown for different flow conditions. Since the experiments provide only surface pressures and force coefficients, the comparison to the numerical results relies on these. Good agreement of these results is found for the lower Mach number cases except for the shock position. As numerical experiments indicate, this seems to be due to the turbulent shock boundary layer interaction which is not correctly modelled by the algebraic turbulence model employed. For the lower Mach number case the influence of the transition location was investigated, too. Changing the transition location at the lower surface has much more influence on the pressure distribution than changing it on the upper side. For the higher Mach number case the double shock structure found in the experiment for the lower Reynolds numbers was not reproduced by the numerical solutions. The reason for this is unknown though it may be due to the turbulence modelling. For the higher Reynolds number a better resolution of the boundary layer is needed in the computation in order to recover the experimental pressure plateau; but then the shock position is still found downstream of the experimental one.

Schwamborn, D.↗
NASA NTRS2008

Comparison of Measured and Block Structured Simulations for the F-16XL Aircraft

This article presents a comparison of the predictions of three RANS codes for flight conditions of the F-16XL aircraft which feature vortical flow. The three codes, ENSOLV, PMB and PAB3D, solve on structured multi-block grids. Flight data for comparison was available in the form of surface pressures, skin friction, boundary layer data and photographs of tufts. The three codes provided predictions which were consistent with expectations based on the turbulence modelling used, which was k- , k- with vortex corrections and an Algebraic Stress Model. The agreement with flight data was good, with the exception of the outer wing primary vortex strength. The confidence in the application of the CFD codes to complex fighter configurations increased significantly through this study.

Boelens, O. J.↗
NASA NTRS1978

On the fundamental structure of Galois switching functions

In connection with investigations conducted by Menger (1969), Benjauthrit and Reed (1976), and Pradhan (1978) two methods have been reported for deriving a unique Galois switching function from a given truth table description of the function. However, neither of the two methods appears satisfactory. One method often contains many redundant terms in its formulation, whereas the second method requires a great number of multiplications and additions. By some algebraic manipulations, an expanded formula is obtained which combines the best features of both methods. This formula makes it possible to compute the coefficients of the desired function more directly and probably with less effort. The conduction of calculations by means of the new formula is illustrated with the aid of examples.

Benjauthrit, B.↗
DOE OSTI2025

A Block-Structured Adaptive Mesh Framework to Solve Radiation Transfer Equation in Irregular Embedded Geometries

Radiation transport arises in various scientific, industrial, and medical fields, and understanding its effect in applications is needed to make accurate predictions, safety assessments and performance optimizations. Solving the Radiation Transport Equation (RTE) is challenging due to its integro-differential nature, which involves both differential and integral terms. The differential term describes the change in radiation intensity due to absorption and emission, while the integral term accounts for scattering. The accurate modeling of radiation is further complicated in many applications due to the complex, irregular geometries. Various methods exist for solving the RTE, including the zonal, Monte Carlo, spherical harmonics, discrete ordinates, and finite volume methods. Traditional mesh-based approaches, which rely on structured or unstructured meshes, struggle with irregular geometries due to: a) the difficulty of conforming structured grids to irregular domains, b) challenges in enforcing boundary conditions correctly, and c) the additional computational cost of unstructured mesh methods. This work presents a second-order accurate method for solving the RTE in irregular geometries. The radiation intensity is discretized using the finite-volume method in both spatial and angular directions on regular Cartesian grid blocks. Leveraging the block-structured adaptive mesh refinement (AMR) framework provided by AMReX, our method refines the grid locally to reduce spatial discretization error, ensuring a converged numerical solution while minimizing computational costs elsewhere. A two-stage deferred correction approach is employed: First, a first-order discretization on grid blocks is solved using an algebraic multigrid method in HYPRE. Second, a correction term is applied explicitly to achieve second-order accuracy. The correction term is calculated by approximating the radiation flux on cell faces using a Total Variation Diminishing (TVD) scheme. This approach ensures quick convergence of the multigrid method while preserving higher-order accuracy of the numerical solution. Irregular geometries are resolved as embedded boundaries (EB), resulting in both cut cells and regular cells. In cut cells, we modify the fluxes using face fractions and incorporate additional contributions from EB boundary conditions. To ensure higher-order convergence near the EB interface, the correction term is modified by interpolating the radiation intensity to fictitious ghost points. The implementation takes advantage of modern supercomputers by leveraging AMReX’sMPI/X parallelization strategy where X can be MPI or a GPU accelerator including CUDA, HIP and DPC++. We validate our solver using classical test cases, both with and without EB, demonstrating accuracy and efficiency. Additionally, we analyze the impact of adaptive mesh refinement on solution accuracy and computational cost, highlighting the advantages of our approach for high-resolution radiation transport simulations.

computational fluid dynamics (CFD)↗
NASA NTRS1985

Parametric Stiffness Control of Flexible Structures

An unconventional method for control of flexible space structures using feedback control of certain elements of the stiffness matrix is discussed. The advantage of using this method of configuration control is that it can be accomplished in practical structures by changing the initial stress state in the structure. The initial stress state can be controlled hydraulically or by cables. The method leads, however, to nonlinear control equations. In particular, a long slender truss structure under cable induced initial compression is examined. both analytical and numerical analyses are presented. Nonlinear analysis using center manifold theory and normal form theory is used to determine criteria on the nonlinear control gains for stable or unstable operation. The analysis is made possible by the use of the exact computer algebra system MACSYMA.

Moon, F. C.↗
DOE OSTI2025

Spinor representations for fields with any spin: Lorentz tensor basis for operators and covariant multipole decomposition

This paper discusses a framework to parametrize and decompose operator matrix elements for particles with higher spin (j > 1/2) using chiral representations of the Lorentz group, i.e. the (j, 0) and (0, j) representations and their parity-invariant direct sum. Unlike traditional approaches that require imposing constraints to eliminate spurious degrees of freedom, these chiral representations contain exactly the 2j + 1 components needed to describe a spin-j particle. The central objects in the construction are the t-tensors, which are generalizations of the Pauli four-vector σ μ for higher spin. For the generalized spinors of these representations, we demonstrate how the algebra of the t-tensors allows to formulate a generalization of the Dirac matrix basis for any spin. For on-shell bilinears, we show that a set consisting exclusively of covariant multipoles of order 0 ≤ m ≤ 2j forms a complete basis. We provide explicit expressions for all bilinears of the generalized Dirac matrix basis, which are valid for any spin value. As a byproduct of our derivations we present an efficient algorithm to compute the t-tensor matrix elements. The formalism presented here paves the way to use a more unified approach to analyze the non-perturbative QCD structure of hadrons and nuclei across different spin values, with clear physical interpretation of the resulting distributions as covariant multipoles.

Angular momentum of light↗
DOE OSTI2021

Topological data analysis of task-based fMRI data from experiments on schizophrenia

We use methods from computational algebraic topology to study functional brain networks, in which nodes represent brain regions and weighted edges represent similarity of fMRI time series from each region. With these tools, which allow one to characterize topological invariants such as loops in high-dimensional data, we are able to gain understanding into low-dimensional structures in networks in a way that complements traditional approaches based on pairwise interactions. In the present paper, we analyze networks constructed from task-based fMRI data from schizophrenia patients, healthy controls, and healthy siblings of schizophrenia patients using persistent homology, which allows us to explore the persistence of topological structures such as loops at different scales in the networks. We use persistence landscapes, persistence images, and Betti curves to create output summaries from our persistent-homology calculations, and we study the persistence landscapes and images using k-means clustering and community detection. Based on our analysis of persistence landscapes, we find that the members of the sibling cohort have topological features (specifically, their 1-dimensional loops) that are distinct from the other two cohorts. From the persistence images, we are able to distinguish all three subject groups and to determine the brain regions in the loops (with four or more edges) that allow us to make these distinctions.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1992

Optimal matrix approximants in structural identification

Problems of model correlation and system identification are central in the design, analysis, and control of large space structures. Of the numerous methods that have been proposed, many are based on finding minimal adjustments to a model matrix sufficient to introduce some desirable quality into that matrix. In this work, several of these methods are reviewed, placed in a modern framework, and linked to other previously known ideas in computational linear algebra and optimization. This new framework provides a point of departure for a number of new methods which are introduced here. Significant among these is a method for stiffness matrix adjustment which preserves the sparsity pattern of an original matrix, requires comparatively modest computational resources, and allows robust handling of noisy modal data. Numerical examples are included to illustrate the methods presented herein.

Beattie, C. A.↗
NASA NTRS2001

Investigation of Conjugate Heat Transfer in Turbine Blades and Vanes

We report on work carried out to develop a 3-D coupled Finite Volume/BEM-based temperature forward/flux back (TFFB) coupling algorithm to solve the conjugate heat transfer (CHT) which arises naturally in analysis of systems exposed to a convective environment. Here, heat conduction within a structure is coupled to heat transfer to the external fluid which is convecting heat into or out of the solid structure. There are two basic approaches to solving coupled fluid structural systems. The first is a direct coupling where the solution of the different fields is solved simultaneously in one large set of equations. The second approach is a loose coupling strategy where each set of field equations is solved to provide boundary conditions for the other. The equations are solved in turn until an iterated convergence criterion is met at the fluid-solid interface. The loose coupling strategy is particularly attractive when coupling auxiliary field equations to computational fluid dynamics codes. We adopt the latter method in which the BEM is used to solve heat conduction inside a structure which is exposed to a convective field which in turn is resolved by solving the NASA Glenn compressible Navier-Stokes finite volume code Glenn-HT. The BEM code features constant and bi-linear discontinuous elements and an ILU-preconditioned GMRES iterative solver for the resulting non-symmetric algebraic set arising in the conduction solution. Interface of flux and temperature is enforced at the solid/fluid interface, and a radial-basis function scheme is used to interpolated information between the CFD and BEM surface grids. Additionally, relaxation is implemented in passing the fluxes from the conduction solution to the fluid solution. Results from a simple test example are reported.

Kassab, A. J.↗
NASA NTRS2005

Geometric analysis of Arabidopsis root apex reveals a new aspect of the ethylene signal transduction pathway in development

Structurally, ethylene is the simplest phytohormone and regulates multiple aspects of plant growth and development. Its effects are mediated by a signal transduction cascade involving receptors, MAP kinases and transcription factors. Many morphological effects of ethylene in plant development, including root size, have been previously described. In this article a combined geometric and algebraic approach has been used to analyse the shape and the curvature in the root apex of Arabidopsis seedlings. The process requires the fitting of Bezier curves that reproduce the root apex shape, and the calculation of the corresponding curvatures. The application of the method has allowed us to identify significant differences in the root curvatures of ethylene insensitive mutants (ein2-1 and etr1-1) with respect to the wild-type Columbia.

Arabidopsis/genetics/growth & development↗
NASA NTRS1988

Sensitivity of control-augmented structure obtained by a system decomposition method

The verification of a method for computing sensitivity derivatives of a coupled system is presented. The method deals with a system whose analysis can be partitioned into subsets that correspond to disciplines and/or physical subsystems that exchange input-output data with each other. The method uses the partial sensitivity derivatives of the output with respect to input obtained for each subset separately to assemble a set of linear, simultaneous, algebraic equations that are solved for the derivatives of the coupled system response. This sensitivity analysis is verified using an example of a cantilever beam augmented with an active control system to limit the beam's dynamic displacements under an excitation force. The verification shows good agreement of the method with reference data obtained by a finite difference technique involving entire system analysis. The usefulness of a system sensitivity method in optimization applications by employing a piecewise-linear approach to the same numerical example is demonstrated. The method's principal merits are its intrinsically superior accuracy in comparison with the finite difference technique, and its compatibility with the traditional division of work in complex engineering tasks among specialty groups.

Sobieszczanskisobieski, Jaroslaw↗
NASA NTRS1991

Sensitivity of control-augmented structure obtained by a system decomposition method

The verification of a method for computing sensitivity derivatives of a coupled system is presented. The method deals with a system whose analysis can be partitioned into subsets that correspond to disciplines and/or physical subsystems that exchange input-output data with each other. The method uses the partial sensitivity derivatives of the output with respect to input obtained for each subset separately to assemble a set of linear, simultaneous, algebraic equations that are solved for the derivatives of the coupled system response. This sensitivity analysis is verified using an example of a cantilever beam augmented with an active control system to limit the beam's dynamic displacements under an excitation force. The verification shows good agreement of the method with reference data obtained by a finite difference technique involving entire system analysis. The usefulness of a system sensitivity method in optimization applications by employing a piecewise-linear approach to the same numerical example is demonstrated. The method's principal merits are its intrinsically superior accuracy in comparison with the finite difference technique, and its compatibility with the traditional division of work in complex engineering tasks among specialty groups.

Sobieszczanski-Sobieski, Jaroslaw↗
DOE OSTI2026

A fractional calculus framework for open quantum dynamics: From Liouville to Lindblad to memory kernels

Open quantum systems exhibit dynamics ranging from unitary evolution to irreversible dissipation. While the Gorini–Kossakowski–Sudarshan–Lindblad equation uniquely characterizes Markovian completely positive and trace-preserving (CPTP) evolution, many physical platforms display non-Markovian features such as algebraic relaxation and coherence backflow. Fractional calculus provides a natural way to model such long-memory behavior through power-law temporal kernels introduced by fractional time derivatives. Here, we develop a unified framework that embeds fractional master equations within the broader hierarchy of open-system formalisms. The fractional equation forms a structured subclass of memory-kernel models, reduces to the Lindblad form at unit order, and, through Bochner–Phillips subordination, admits a CPTP representation as an average over Lindblad semigroups. Its resolvent structure further connects fractional dynamics to established non-Markovian approaches, including Nakajima–Zwanzig kernels and hierarchical equations of motion, providing a compact surrogate for long-memory effects. This formulation positions fractional calculus as a rigorous and practical language for modeling non-Markovian quantum dynamics in chemical physics and physical chemistry, providing a CPTP-preserving, computationally efficient surrogate for structured condensed-phase environments where long-time memory and dissipation play a central role.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1992

Variable-complexity aerodynamic optimization of an HSCT wing using structural wing-weight equations

A new approach for combining conceptual and preliminary design techniques for wing optimization is presented for the high-speed civil transport (HSCT). A wing-shape parametrization procedure is developed which allows the linking of planform and airfoil design variables. Variable-complexity design strategies are used to combine conceptual and preliminary-design approaches, both to preserve interdisciplinary design influences and to reduce computational expense. In the study, conceptual-design-level algebraic equations are used to estimate aircraft weight, supersonic wave drag, friction drag and drag due to lift. The drag due to lift and wave drag are also evaluated using more detailed, preliminary-design-level techniques. The methodology is applied to the minimization of the gross weight of an HSCT that flies at Mach 3.0 with a range of 6500 miles.

Hutchison, M. G.↗
DOE OSTI2024

Dualities among massive, partially massless and shift symmetric fields on (A)dS

We catalog all the electromagnetic-like dualities that exist between free dynamical bosonic fields of arbitrary symmetry type and mass on (anti-) de Sitter space in all dimensions, including dualities among the partially massless and shift symmetric fields. This generalizes to all these field types the well known fact that a massless p-form is dual to a massless (D − p − 2)-form in D spacetime dimensions. In the process, we describe the structure of the Weyl modules (the spaces of local operators linear in the fields and their derivative relations) for all the massive, partially massless and shift symmetric fields.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

A supernodal all-pairs shortest path algorithm

We show how to exploit graph sparsity in the Floyd-Warshall algorithm for the all-pairs shortest path (Apsp) problem. Floyd-Warshall is an attractive choice for Apsp on high-performing systems due to its structural similarity to solving dense linear systems and matrix multiplication. However, if sparsity of the input graph is not properly exploited, Floyd-Warshall will perform unnecessary asymptotic work and thus may not be a suitable choice for many input graphs. To overcome this limitation, the key idea in our approach is to use the known algebraic relationship between Floyd-Warshall and Gaussian elimination, and import several algorithmic techniques from sparse Cholesky factorization, namely, fill-in reducing ordering, symbolic analysis, supernodal traversal, and elimination tree parallelism. When combined, these techniques reduce computation, improve locality and enhance parallelism. We implement these ideas in an efficient shared memory parallel prototype that is orders of magnitude faster than an efficient multi-threaded baseline Floyd-Warshall that does not exploit sparsity. Our experiments suggest that the Floyd-Warshall algorithm can compete with Dijkstra's algorithm (the algorithmic core of Johnson's algorithm) for several classes sparse graphs.

Sao, Piyush↗
NASA NTRS1990

Evaluation of expressions involving higher order derivations

The local geometric properties of a nonlinear control system defined by vector fields E(sub 1),..., E(sub M) are determined by the algebraic properties of the iterated Lie brackets of the E(sub j)'s. The problem of rewriting expressions is examined involving the E(sub j)'s in terms of the D(sub mu)'s in such a way as to handle effectively any cancellation occurring due to commuting of the D(sub mu)'s. A data structure is introduced which allows us to organize the computation to take advantage of the symmetries in the expression and reduce the operation count.

Grossman, Robert↗