Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Al”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Hydrogen Stability and Bonding in SiN x and Al 2 O 3 Dielectric Stacks on Poly-Si/SiO x Passivating Contacts

Polycrystalline Si on SiO x passivating contacts enables some of the highest efficiency single-junction Si photovoltaic devices, but the high-temperature firing process needed for industrial metallization can significantly reduce passivation. We show that after firing, the implied open-circuit voltage, iV oc , for the Al 2 O 3 /SiN x /poly-Si/SiO x /c-Si stack is 20-30 mV higher than the SiNx/Al 2 O 3 /poly-Si/SiO x /c-Si stack and therefore provides better passivation of the SiO x /c-Si interface. Using effusion measurements and Fourier transform infrared spectroscopy, we demonstrate that more than twice as much hydrogen is retained in the dielectric up to the peak firing temperature of ~800 degrees C for Al 2 O 3 -capped structures. If the Al 2 O 3 layer is not present in the stack, after firing, the iVoc is lower by 50-100 mV compared to Al 2 O 3 /SiN x or SiN x /Al 2 O 3 stacks. These studies will inform future work on the role of dielectrics in aiding the passivation of poly-Si/SiO x passivating contacts.

08 HYDROGEN↗
DOE OSTI2020

Optimized Al Doping Improves Both Interphase Stability and Bulk Structural Integrity of Ni-Rich NMC Cathode Materials

Ni-rich layered transition metal oxide (NMC, LiNi1-x-yMxCoyO2, 1 – x – y = 0.6) is promising for high-energy-density lithium-ion batteries, but its large-scale application is still hindered by several technical challenges, including secondary particle cracking, interfacial instability, and cell degassing during cycling. Here, we report a facile wet-chemical method to modify both the surface and the bulk of the LiNi0.76Mn0.14Co0.10O2 (NMC76) cathode with Al doping to effectively improve the structural/interfacial stability of the cathode, and hence its long-term cycling capability. With only 1 mol% Al doping, the Al-NMC76 electrode delivers a good capacity retention of 79.2% after 500 cycles at a high voltage limit of 4.5 V, which is far better than those of undoped NMC76 under the similar condition. The enhanced performance can be attributed to the Al doping in the NMC76, which not only strengthens the bulk structural stability through doping into the lattice, but also suppresses acidic attack from the electrolyte through altered surface structure of NMC76.

Al doping, capacity retention, high voltage, elect↗
DOE OSTI2024

Al‐Rich AlGaN Transistors with Regrown p‐AlGaN Gate Layers and Ohmic Contacts

Abstract Epitaxial regrowth processes are presented for achieving Al‐rich aluminum gallium nitride (AlGaN) high electron mobility transistor (HEMTs) with p‐type gates with large, positive threshold voltage for enhancement mode operation and low resistance Ohmic contacts. Utilizing a deep gate recess etch into the channel and an epitaxial regrown p‐AlGaN gate structure, an Al 0.85 Ga 0.15 N barrier/Al 0.50 Ga 0.50 N channel HEMT with a large positive threshold voltage (V TH = +3.5 V) and negligible gate leakage is demonstrated. Epitaxial regrowth of AlGaN avoids the use of gate insulators which can suffer from charge trapping effects observed in typical dielectric layers deposited on AlGaN. Low resistance Ohmic contacts (minimum specific contact resistance = 4 × 10 −6 Ω cm 2 , average = 1.8 × 10 −4 Ω cm 2 ) are demonstrated in an Al 0.85 Ga 0.15 N barrier/Al 0.68 Ga 0.32 N channel HEMT by employing epitaxial regrowth of a heavily doped, n‐type, reverse compositionally graded epitaxial structure. The combination of low‐leakage, large positive threshold p‐gates and low resistance Ohmic contacts by the described regrowth processes provide a pathway to realizing high‐current, enhancement‐mode, Al‐rich AlGaN‐based ultra‐wide bandgap transistors.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Boosting Hydrogenation of CO 2 Using Cationic Cu Atomically Dispersed on 2D γ‐Al 2 O 3 Nanosheets

The continuous development of novel catalytic approaches is crucial for advancing efficient CO 2 hydrogenation processes. Drawing inspiration from single-atom catalysis and 2D materials, we designed a new 2D single-atom catalyst with excellent thermal stability by thermally treating Cu-adsorbed γ-AlOOH nanosheets, which yielded a Cu/γ-Al 2 O 3 catalyst with high activity in the hydrogenation of CO 2 -yielding methanol (CH 3 OH), dimethyl ether (DME), and CO as products. The active Cu sites are monodispersed and highly stable due to their cationic oxidation state and their substitution for pentacoordinated aluminum (Al P ) sites on particle surfaces. This study demonstrates an efficient approach for achieving a high CO 2 hydrogenation rate (30.45 mol mol −1 h −1 ) using a catalyst system that lacks metallic Cu centers, traditionally considered essential for H₂ dissociation, and employs what was previously thought to be an inert metal oxide (γ-Al 2 O 3 ) for CO and CH 3 OH production. Ongoing mechanistic studies aim to elucidate the synergy between cationic Cu single atoms and γ-Al 2 O 3 , a Lewis acid support, in facilitating hydrogen (H 2 ) activation and methanol formation.

2D catalyst↗
DOE OSTI2022

Evolution of Physical Properties of RE 3 Ni 5 Al 19 Family (RE = Y, Nd, Sm, Gd, Tb, Dy, Ho, and Er)

In this study, single crystals of RE 3 Ni 5 Al 19 series (RE = Y, Nd, Sm, Gd, Tb, Dy, Ho, and Er) are grown using the Al self-flux method. The crystal structure is examined by both single crystal and powder X-ray diffraction. Physical properties are studied for the first time for RE 3 Ni 5 Al 19 (RE = Y, Nd, Gd, Tb, Dy, Ho, and Er) by means of magnetic susceptibility, electrical resistivity, and heat capacity measurements. Complex magnetic behaviors, with up to three transitions present for RE = Sm, Gd, Tb, and Dy, are revealed. Y 3 Ni 5 Al 19 is found to be a nonmagnetic nonsuperconducting metal (above T = 1.8 K) with weak electron–phonon coupling strength.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Variation of the Passive Film on Compositionally Concentrated Dual-Phase Al 0.3 Cr 0.5 Fe 2 Mn 0.25 Mo 0.15 Ni 1.5 Ti 0.3 and Implications for Corrosion

The passive film on a dual-phase Al 0.3 Cr 0.5 Fe 2 Mn 0.25 Mo 0.15 Ni 1.5 Ti 0.3 FCC + Heusler (L2 1 ) compositionally concentrated alloy formed during extended exposure to an applied potential in the passive range in dilute chloride solution was characterized. Each phase, with its own distinct composition of passivating elements, formed unique passive films separated by a heterophase interface. High-resolution, surface sensitive characterization enabled chemical analysis of the passive film formed over individual phases. The film formed over the L2 1 phase had a higher concentration of Al, Ni, and Ti, while the film formed over FCC phase was of similar thickness but contained comparatively higher Cr, Fe, and Mo concentrations, consistent with the differences in bulk microstructure composition. The passive film was continuous across phase boundaries and the distribution of passivating elements (Al, Cr, and Ti) indicated both phases were independently passivated. Spatially resolved analysis of the surface chemistry of the dual-phase CCA revealed that the cation with the highest composition in passive film formed on the FCC phase was Cr (52.4 at. pct) and for the L2 1 phase was Ti (53.1 at. pct) despite the bulk concentration of each element being below 20 at. pct in their respective phases. Al, Cr, and Ti were enriched in both phases within the passive film relative to their respective bulk compositions. In parallel studies, single-phase alloys with compositions representative of the FCC and L2 1 phases were synthesized to evaluate the corrosion behavior of each phase in isolation. The corrosion behavior of the dual-phase alloy showed passivity evidenced by a pitting potential of 0.615 V SCE in 0.01 M NaCl. The pitting potential and other electrochemical parameters suggested a combination of behaviors of both single-phase samples, suggesting that the global corrosion behavior may be represented by a composite theory applied to phases, their area fractions, and interphase length. However, the interphase in the dual-phase CCA was a local corrosion initiation site and may limit localized corrosion protectiveness. The alloy design implications for optimization of second phase structure and morphology are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Operando synchrotron X-ray analysis of melt pool dynamics in an Al-Sn immiscible alloy

The melt flow in an Al-50vol.% Sn immiscible alloy, produced by single-track laser melting of Al and Sn elemental powders, was studied in real time. High-speed synchrotron X-ray imaging was used to track Al and Sn liquids’ movements, and also to examine elemental distributions in the laser tracks, complimented by electron microscopy after solidification. Key aspects, including melt pool geometry, keyhole instability, and flow dynamics (flow pattern and velocity), were examined using digital image analysis. Relatively deeper melt pools formed at 400 W and 300 mm/s exhibited greater stability, with smooth surfaces, consistent outward flow, and minor vortices near the keyhole. In contrast, shallower pools produced at higher scanning speeds (>500 mm/s) demonstrated greater instability with increased surface waviness, and stronger velocity fluctuations, leading to numerous micro-vortices and increased Al-Sn heterogeneity. Velocity scale estimations, supported by experimental observations, examined the roles of vapour pressure, Marangoni effect, buoyancy, inertial, and surface tension forces in the flow. The results revealed that vapour pressure and mechanical waves dominated at high scanning speeds (shallow pools), while Marangoni forces were equally significant in deep pools at lower speeds (300 mm/s). Buoyancy was found to have minimal impact in both cases. Furthermore, the interaction between inertial and surface tension forces played a critical role in determining the degree of waviness of the pools’ surfaces. These findings offer valuable insights into melt pool dynamics during laser processing of immiscible alloys and other metallic systems using elemental powders, and provide guidance for developing high-fidelity computational fluid dynamics models.

immiscible alloys↗
DOE OSTI2023

Optimization and understanding of ZnO nanoarray supported Cu-ZnO-Al 2 O 3 catalyst for enhanced CO 2 -methanol conversion at low temperature and pressure

Cu-ZnO-Al 2 O 3 is the most widely applied catalyst for CO 2 hydrogenation to methanol. However, it is still a challenge to produce methanol using this catalyst under low-temperature (<250 °C) and low-pressure (<10 bar) conditions with desirable yield and selectivity. In this work, by tuning the experimental processing parameters such as solvent, loading amount, and annealing temperature, highly improved ZnO nanoarray supported Cu-ZnO-Al 2 O 3 catalysts have been successfully demonstrated. Here, by using organic solvent (N,N-dimethylformamide (DMF), acetone, or isopropanol) for dip-coating loading process instead of deionized (DI) water, Cu-ZnO-Al 2 O 3 nanocatalysts was comparatively better dispersed on the nanorod array support with populated and abundant active sites, thus enhancing the methanol yield. With the control of the loading amount and annealing temperature, finely distributed Cu nanoparticles were obtained on the ZnO nanorod surfaces to enhance the interactions between Cu and ZnO nanorod surfaces. Further improvement of the catalyst performance is demonstrated by tuning the reaction space velocity. At 200 °C and 10 bar conditions, the optimized catalyst achieved a methanol yield of 6.46 mol h –1 kg –1 with 100 % selectivity. The good stability after prolonged testing of the catalysts demonstrates the potential practical implementation. The in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements under the 1 bar reveal that the CO 2 hydrogenation to methanol on the ZnO nanoarray supported Cu-ZnO-Al 2 O 3 catalyst follows the CO reaction pathway, due to the surface oxygen vacancies on ZnO nanorods which facilitate CO 2 dissociation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

The effect of equilibration time on Al uptake in C-S-H

Calcium silicate hydrate (C-S-H) is the main hydration product of Portland cements. The partial replacement of Portland cements by supplementary cementitious materials can result in C-S-H with lower Ca/Si ratios and more aluminum and alkalis. The effect of equilibration time on Al uptake in C-S-H was investigated using equilibration times from 7 days up to 3 years. Lower Al concentrations were measured in the solution after longer equilibration times. In addition, a higher uptake of Al in C-S-H was observed based on the decrease in the content of secondary phases. Little further decrease in Al concentrations was observed after 2 years and longer at low Ca/Si. At high Ca/Si no significant change in solution concentrations was observed after more than 3 month, while the destabilization of secondary phases continued up to 1 year, indicating that a (meta)stable equilibrium was reached faster at higher Ca/Si ratios.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Response to a comment on Dessert et al. “The dark matter interpretation of the 3.5 keV line is inconsistent with blank-sky observations”

The dark matter explanation of the 3.5 keV line is strongly disfavored by our work in Dessert et al. (2020). Boyarsky et al. (2004) questions that conclusion: modeling additional background lines is claimed to weaken the limit sufficiently to re-allow a dark matter interpretation. Here, we respond as follows. (1) A more conservative limit is obtained by modeling additional lines; this point appeared in its entirety in our work in Dessert et al. (2020), though we also showed that the inclusion of such lines is not necessary. (2) Despite suggestions in Boyarsky et al. (2004), even the more conservative limits strongly disfavor a decaying dark matter origin of the 3.5 keV line.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Effect of Al substitution on the magnetocaloric properties of Ni-Co-Mn-Sn multifunctional alloys

Ni-Mn-based metamagnetic shape memory alloys have been extensively studied due to their multifunctional properties including magnetocaloric effect (MCE), magnetoresistance effect, and magnetic-field-induced strain. However, the large intrinsic thermal hysteresis of these alloys sets a limit on further development for practical applications. Here, with a few atomic percent Al substitution, we greatly reduced the thermal hysteresis and transformation temperature interval while maintaining the large magnetization difference (ΔM) between austenite and martensite. The simultaneous achievement of a large ΔM and low thermal hysteresis leads to a remarkable enhancement in MCE upon Al substitution, and a maximum magnetic entropy change of 31.6 J/kg K is achieved under a field of 5 T in Ni 39 Co 11 Mn 40 Sn 8 Al 2 . Furthermore, our in situ high-energy X-ray diffraction experiments show that the Ni 39 Co 11 Mn 40 Sn 8 Al 2 has good geometric compatibility between austenite and martensite, which accounts for the reduced thermal hysteresis in this alloy. This study is instructive for the development of high-performance magnetocaloric materials in the metamagnetic shape memory alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Increasing the composition range of a novel τ 11 -Al 4 Fe 1.7 Si alloy with additions of Mn

Automotive applications need low-cost, lightweight, high-temperature alloys to increase vehicle efficiency. The Al–Fe–Si system provides an opportunity to develop such a material, as it consists of three low-cost elements that are all abundant in nature. Specifically, the τ 11 -Al 4 Fe 1.7 Si ternary intermetallic phase is a high-temperature, lightweight phase with high strength and good corrosion resistance. However, this phase exhibits a narrow compositional range of stability, resulting in undesirable microstructures forming during solidification and processing, limiting its use in potential applications. Density functional theory (DFT) calculations and a thermodynamically-driven experimental approach utilizing diffusion couples were employed to study the effect of Mn on the stability and composition range of τ 11 -Al 4 Fe 1.7 Si. The DFT calculations showed a decrease in the energy of the structure when alloying with Mn. Experimental results confirmed the predictions from the DFT calculations, indicating that alloying with Mn increases the compositional range, and thus the processability of this phase. New phase diagrams and equilibria are proposed by exploring and determining phase boundaries for the τ 11 -Al 4 Fe 1.7 Si phase with Mn.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Revisit the VEC criterion in high entropy alloys (HEAs) with high-throughput ab initio calculations: A case study with Al-Co-Cr-Fe-Ni system

Valence electron concentration (VEC) was treated as a useful parameter to predict the stability of solid solution phases. However, the available experimental data to support this criterion is far from enough. In the current study, the high-throughput ab initio modeling is applied to investigate the relative stability of FCC and BCC single crystals of the Al-Co-Cr-Fe-Ni high entropy alloys (HEAs) by using the special quasi-random structure (SQS) approach. Furthermore, the predictions start with pure elements of the Al-Co-Cr-Fe-Ni system and are continued with binaries, ternaries, and quaternary compositions, which come up with 180 compositions (360 structures). After that, the reliability of the VEC criterion is testified. The results show that the VEC criterion not only works for the stable structure but also works effectively for metastable structure when both FCC and BCC are not thermodynamic stable. However, it is found that the old VEC criterion proposed by Guo et al. fails to work effectively for compositions containing high concentrations of light-weight metals such as Al at VEC<5. To solve this problem, the present work proposes a new VEC rule to define the stability of FCC and BCC structures at the ground state. With the implementation of the new VEC rule, the effectiveness of the VEC rule (EVEC) of both FCC and BCC structures is enhanced, especially for pure elements and binary compositions, indicating that this rule does not only work effectively for multicomponent systems but also works for low-order systems.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Disordered interfaces of alkaline aluminate salt hydrates provide glimpses of Al 3+ coordination changes

Hypothesis: The precipitation and dissolution of aluminum-bearing mineral phases in aqueous systems often proceed via changes in both aluminum coordination number and connectivity, complicating molecular-scale interpretation of the transformation mechanism. Here, the thermally induced transformation of crystalline sodium aluminum salt hydrate, a phase comprised of monomeric octahedrally coordinated aluminate which is of relevance to industrial aluminum processing, has been studied. Because intermediate aluminum coordination states during melting have not previously been detected, it is hypothesized that the transition to lower coordinated aluminum ions occurs within a highly disordered quasi-two-dimensional phase at the solid-solution interface. Experiments and simulations: In this work, in situ X-ray diffraction (XRD), Raman and 27 Al nuclear magnetic resonance (NMR) spectroscopy were used to monitor the melting transition of nonasodium aluminate hydrate (NSA, Na 9 [Al(OH) 6 ] 2 ·3(OH)·6H 2 O). A mechanistic interpretation was developed based on complementary classical molecular dynamics (CMD) simulations including enhanced sampling. A reactive forcefield was developed to bridge speciation in the solution and in the solid phase. Findings: In contrast to classical dissolution, aluminum coordination change proceeds through a dynamically stabilized ensemble of intermediate states in a disordered layer at the solid-solution interface. In both melting and dissolution of NSA, octahedral, monomeric aluminum transition through an intermediate of pentahedral coordination. The intermediate dehydroxylates to form tetrahedral aluminate (Al(OH)$_4^–$) in the liquid phase. This coordination change is concomitant with a breaking of the ionic aluminate-sodium ion linkages. The solution phase Al(OH)$_4^–$ ions subsequently polymerize into polynuclear aluminate ions. However, there are some differences between bulk melting and interfacial dissolution, with the onset of the surface-controlled process occurring at a lower temperature (~30 °C) and the coordination change taking place more gradually as a function of temperature. This work to determine the local structure and dynamics of aluminum in the disordered layer provides a new basis to understand mechanisms controlling aluminum phase transformations in highly alkaline solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Phase evolution during reactive flash sintering of Li 6.25 Al 0.25 La 3 Zr 2 O 12 starting from a chemically prepared powder

Here, reactive flash sintering (RFS) of a chemically prepared multiphase precursor powder was performed to fabricate Li 6.25 Al 0.25 La 3 Zr 2 O 12 (Al-LLZO) ceramics. This approach allowed for obtaining single-phase dense samples in a remarkably short processing time of 30 s, at a furnace temperature of 600 °C, with an electric field of 50 V cm -1 and a current limit of 150 mA mm -2 . The ceramics display high bulk conductivity of 0.18 mS cm -1 at room temperature. Furthermore, phase evolution is studied by in-situ X-ray diffraction during: i) conventional heating and ii) RFS under current rate mode. As expected, the intermediate phases progressively dissolved into the Al-LLZO matrix by conventional heating. On the other hand, RFS promoted the growth of the intermediate La 2 Zr 2 O 7 , an effect that was overcome by the thermally driven formation of Al-LLZO at higher temperatures. The observed different reaction pathway suggests that RFS can be used for stabilizing phases that are not thermodynamically favored upon conventional heating.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ordering in liquid and its heredity impact on phase transformation of Mg-Al-Ca alloys

It is a long-sought goal to achieve desired mechanical properties through tailoring phase formation in alloys, especially for complicated multi-phase alloys. In fact, unveiling nucleation of competitive crystalline phases during solidification hinges on the nature of liquid. Here we employ ab initio molecular dynamics simulations (AIMD) to reveal liquid configuration of the Mg-Al-Ca alloys and explore its effect on the transformation of Ca-containing Laves phase from Al 2 Ca to Mg 2 Ca with increasing Ca/Al ratio (r Ca/Al ). There is structural similarity between liquid and crystalline phase in terms of the local arrangement environment, and the connection schemes of polyhedras. The forming signature of Mg 2 Ca, as hinted by the topological and chemical short-range order originating from liquid, ascends monotonically with increasing r Ca/Al . However, Al 2 Ca crystal-like order increase at first and then decrease at the crossover of r Ca/Al = 0.74, corresponding to experimental composition of phase transition from Al 2 Ca to Mg 2 Ca. The origin of phase transformation across different compositions lies in the dense packing of atomic configurations and preferential bonding of chemical species in both liquid and solid. The present finding provides a feasible scenario for manipulating phase formation to achieve high performance alloys by tailoring the crystal-like order in liquid.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nanostructured ligament and fiber Al–doped Li 7 La 3 Zr 2 O 12 scaffolds to mediate cathode-electrolyte interface chemistry

In this study, scaffold structures of electrospun aluminum–substituted lithium lanthanum zirconate Li 7 La 3 Zr 2 O 12 (Al-LLZO) were synthesized and used as an additive in a LiNi 0.6 Mn 0.2 Co 0.2 O 2 composite cathode. The scaffolds were crystalized in the cubic phase after calcination at 700 °C. The Al-LLZO scaffold morphology was dependent on the precursor formulation (aqueous and dimethylformamide. The aqueous precursors resulted in scaffolds of densely coalesced ligaments, whereas the dimethylformamide precursors resulted in high–aspect ratio nanofiber scaffolds. The long-term cycling stability and rate performance of the cells were found to depend on the Al-LLZO scaffold morphology. The uniformly dispersed Al-LLZO fibers resulted in a more stable cathode electrolyte interface formation through the reduced decomposition of the LiPF 6 salt during cycling, resulting in a better high-rate and long-term cycling performance.

25 ENERGY STORAGE↗
DOE OSTI2024

Impact of electrolyte solutions on carbon dioxide fixation in single chamber Al–CO 2 battery

Governments and research & development (R&D) organizations are actively initiating various programs and research strategies for CO 2 capture, its utilization, and integration with long duration energy storage from renewable sources worldwide. In line with the carbon capture goals, here we report a novel electrochemical Al-CO 2 battery cell, that can simultaneously capture CO 2 and convert it into value-added products, in addition to long-duration energy generation and storage. Here, this innovative approach employs cost-effective Al metal as an anode and an in-house synthesized Ni–Fe based bimetallic double hydroxide catalyst as the cathode, with meticulously optimized compositions and morphologies. We explore the impact of different aqueous electrolyte solutions compositions on the cell performance, demonstrating up to 10 h of stable long duration energy storage with a stable voltage profile. The cell exhibits low polarization even at high current densities of up to 12 mA cm -2 and maintains stable cycling over 500 h. Through Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray Diffraction and X-ray photoelectron spectroscopy (XPS) analysis, we determined that the discharge product is either NaAlCO 3 (OH) 2 or KAlCO 3 (OH) 2 , distinct from the Al 2 (CO 3 ) 3 typically reported in conventional Al–CO 2 batteries.

25 ENERGY STORAGE↗