Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

BMDO materials testing in the EOIM-3 experiment

The NASA Evaluation of Oxygen Interactions with Materials-3 (EOIM-3) experiment served as a testbed for a variety of materials that are candidates for Ballistic Missile Defense Organization (BMDO) space assets. The materials evaluated on this flight experiment were provided by BMDO contractors and technology laboratories. A parallel ground-based exposure evaluation was conducted using the Fast Atom Sample Tester (FAST) atomic-oxygen simulation facility at Physical Sciences, Inc. The EOIM-3 flight materials were exposed to an atomic oxygen fluence of approximately 2.3 x 10(exp 20) atoms/sq cm. The ground-based exposure fluence of 2.0 - 2.5 x 10(exp 20) atoms/sq cm permits direct comparison with that of the flight-exposed specimens. The results from the flight test conducted aboard STS-46 and the correlative ground-based exposure are summarized here. A more detailed correlation study is presented in the JPL Publication 93-31 entitled 'Flight-and Ground-Test Correlation Study of BMDO SDS Materials: Phase 1 Report'. In general, the majority of the materials survived the AO environment with their performance tolerances maintained for the duration of the exposure. Optical materials, baffles, and coatings performed extremely well as did most of the thermal coatings and tribological materials. A few of the candidate radiator, threat shielding, and structural materials showed significant degradation. Many of the coatings designed to protect against AO erosion of sensitive materials performed this function well.

Chung, Shirley Y.↗
NASA NTRS1995

Space environmental effects on spacecraft: LEO materials selection guide, part 1

This document provides performance properties on major spacecraft materials and subsystems that have been exposed to the low-Earth orbit (LEO) space environment. Spacecraft materials include metals, polymers, composites, white and black paints, thermal-control blankets, adhesives, and lubricants. Spacecraft subsystems include optical components, solar cells, and electronics. Information has been compiled from LEO short-term spaceflight experiments (e.g., space shuttle) and from retrieved satellites of longer mission durations (e.g., Long Duration Exposure Facility). Major space environment effects include atomic oxygen (AO), ultraviolet radiation, micrometeoroids and debris, contamination, and particle radiation. The main objective of this document is to provide a decision tool to designers for designing spacecraft and structures. This document identifies the space environments that will affect the performance of materials and components, e.g., thermal-optical property changes of paints due to UV exposures, AO-induced surface erosion of composites, dimensional changes due to thermal cycling, vacuum-induced moisture outgassing, and surface optical changes due to AO/UV exposures. Where appropriate, relationships between the space environment and the attendant material/system effects are identified. Part 1 covers spacecraft design considerations for the space environment; advanced composites; polymers; adhesives; metals; ceramics; protective coatings; and lubricants, greases, and seals.

Silverman, Edward M.↗
NASA NTRS1995

Space environmental effects on spacecraft: LEO materials selection guide, part 2

This document provides performance properties on major spacecraft materials and subsystems that have been exposed to the low-Earth orbit (LEO) space environment. Spacecraft materials include metals, polymers, composites, white and black paints, thermal-control blankets, adhesives, and lubricants. Spacecraft subsystems include optical components, solar cells, and electronics. Information has been compiled from LEO short-term spaceflight experiments (e.g., space shuttle) and from retrieved satellites of longer mission durations (e.g., Long Duration Exposure Facility). Major space environment effects include atomic oxygen (AO), ultraviolet radiation, micrometeoroids and debris, contamination, and particle radiation. The main objective of this document is to provide a decision tool to designers for designing spacecraft and structures. This document identifies the space environments that will affect the performance of materials and components, e.g., thermal-optical property changes of paints due to UV exposures, AO-induced surface erosion of composites, dimensional changes due to thermal cycling, vacuum-induced moisture outgassing, and surface optical changes due to AO/UV exposures. Where appropriate, relationships between the space environment and the attendant material/system effects are identified. Part 2 covers thermal control systems, power systems, optical components, electronic systems, and applications.

Silverman, Edward M.↗
NASA NTRS1990

High spatial resolution restoration of IRAS images

A general technique to improve the spatial resolution of the IRAS AO data was developed at The Aerospace Corporation using the Maximum Entropy algorithm of Skilling and Gull. The technique has been applied to a variety of fields and several individual AO MACROS. With this general technique, resolutions of 15 arcsec were achieved in 12 and 25 micron images and 30 arcsec in 60 and 100 micron images. Results on galactic plane fields show that both photometric and positional accuracy achieved in the general IRAS survey are also achieved in the reconstructed images.

Grasdalen, Gary L.↗
NASA NTRS1995

Degradation of FEP thermal control materials returned from the Hubble Space Telescope

After an initial 3.6 years of space flight, the Hubble Space Telescope was serviced through a joint effort with the NASA and the European Space Agency. Multi-layer insulation (MLI) was retrieved from the electronics boxes of the two magnetic sensing systems (MSS), also called the magnetometers, and from the returned solar array (SA-I) drive arm assembly. The top layer of each MLI assembly is fluorinated ethylene propylene (FEP, a type of Teflon). Dramatic changes in material properties were observed when comparing areas of high solar fluence to areas of low solar fluence. Cross sectional analysis shows atomic oxygen (AO) erosion values up to 25.4 mu m (1 mil). Greater occurrences of through-thickness cracking and surface microcracking were observed in areas of high solar exposure. Atomic force microscopy (AFM) showed increases in surface microhardness measurements with increasing solar exposure. Decreases in FEP tensile strength and elongation were measured when compared to non-flight material. Erosion yield and tensile results are compared with FEP data from the Long Duration Exposure Facility. AO erosion yield data, solar fluence values, contamination, micrometeoroid or debris impact sites, and optical properties are presented.

Zuby, Thomas M.↗
NASA NTRS1995

Workshop on Discovery Lessons-Learned

As part of the Discovery Program's continuous improvement effort, a Discovery Program Lessons-Learned workshop was designed to review how well the Discovery Program is moving toward its goal of providing low-cost research opportunities to the planetary science community while ensuring continued U.S. leadership in solar system exploration. The principal focus of the workshop was on the recently completed Announcement of Opportunity (AO) cycle, but the program direction and program management were also open to comment. The objective of the workshop was to identify both the strengths and weaknesses of the process up to this point, with the goal of improving the process for the next AO cycle. The process for initializing the workshop was to solicit comments from the communities involved in the program and to use the feedback as the basis for establishing the workshop agenda. The following four sessions were developed after reviewing and synthesizing both the formal feedback received and informal feedback obtained during discussions with various participants: (1) Science and Return on Investment; (2) Technology vs. Risk; Mission Success and Other Factors; (3) Cost; and (4) AO.AO Process Changes and Program Management.

Saunders, M.↗
NASA NTRS1999

Investigation of Atomic Oxygen Erosion of Polyimide Kapton H Exposed to a Plasma Asher Environment

Experimental results are presented on the erosion characteristics of the polyimide Kapton H, which serves as a blanket material in solar arrays. This polymer has a number of characteristics that make it a suitable choice for both terrestrial and space applications. In this paper attention is focused on the durability of protected Kapton when exposed to atomic oxygen (AO) in a plasma asher. A strip of 0.025-mm thick Kapton film, coated on both sides with SiO2, was studied during a 1306 hour exposure. The erosion, located at defect sites in the protective coating and measured optically, is described in terms of volume loss as a function of AO fluence. Three simple geometric profiles are used to generate a useful array of cavity shapes to model erosion evolution. These models connect the volume erosion rate to the observed lateral expansion of the developing cavities via their diameters, measured adviacent to the upper and lower protective film, and fitted by least-squares regression to simple power law functions of fluence. The rationale for the choice of models is discussed. It was found that lateral growth in cavity size evolves less than linearly with fluence.

Snyder, Aaron↗
NASA NTRS1999

MSFC Investigations of Beta Cloth Darkening Due to Ultraviolet Radiation Interactions

A common component of multi-layer insulation blankets is beta cloth, a woven fiberglass cloth impregnated with Teflon. It is planned for extensive use on the International Space Station (ISS). The Environmental Effects Group of the Marshall Space Flight Center Materials, Processing and Manufacturing Department has investigated the impact of atomic oxygen (AO) and ultraviolet (UV) radiation on the optical properties of plain and aluminized beta cloth, both in the laboratory and as part of long-duration flight experiments. These investigations indicate that beta cloth was susceptible to darkening in the presence of UV radiation, dependent on the additives used. The presence of AO countered some, if not all, of the UV degradation.

Kamenetzky, Rachel R.↗
NASA NTRS1999

Comparison of Observed Beta Cloth Interactions with Simulated and Actual Space Environment

A common component of multilayer insulation blankets is beta cloth, a woven fiberglass cloth impregnated with Teflon(TM). It is planned for extensive use on the International Space Station. The Environmental Etl'ects Group of the Marshall Space Flight Center Materials, Processing, and Manufacturing Department has investigated the impact of atomic oxygen (AO) and ultraviolet (UV) radiation on the optical properties of plain and aluminized beta cloth. both in the laboratory and as part of long-duration flight experiments. These investigations indicate that beta cloth is susceptible to darkening in the presence of UV radiation, dependent on the additives used. AO interactions resulted in bleaching of the beta cloth.

Kamenetzy, R. R.↗
NASA NTRS1998

A Study of Photon-Dominated Regions in Reflection Nebulae

The goals of this research were to determine the physical conditions of the Photon-Dominated Regions (PDRS) surrounding the cooler stars (BO-AO) of several reflection nebulae and to test theoretical "low-density" PDR models. In contrast to the substantial investigation on "high-density" PDRS, "low-density" PDRs have been adequately modelled, but have not been adequately tested. At the start of this project, we had reduced Kuiper Airborne Observatory spectra of several far-infrared (FIR) fine structure lines on eight reflection nebulae that cover a range in cooler stellar spectral types (AO-BO). We analyzed these data in the context of "low-density" PDR models asking the question: Do the physical conditions in these reflection nebulae change with stellar spectral type as predicted? A brief description of the findings as well as a short list of names and dates of anticipated publications are presented.

Meixner, Margaret↗
NASA NTRS2002

Exposure of Polymer Film Thermal Control Materials on the Materials International Space Station Experiment (MISSE)

Seventy-nine samples of polymer film thermal control (PFTC) materials have been provided by the National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) for exposure to the low Earth orbit environment on the exterior of the International Space Station (ISS) as part of the Materials International Space Station Experiment (MISSE). MISSE is a materials flight experiment sponsored by the Air Force Research Lab/Materials Lab and NASA. This paper will describe background, objectives, and configurations for the GRC PFTC samples for MISSE. These samples include polyimides, fluorinated polyimides, and Teflon fluorinated ethylene propylene (FEP) with and without second-surface metallizing layers and/or surface coatings. Also included are polyphenylene benzobisoxazole (PBO) and a polyarylene ether benzimidazole (TOR-LM). On August 16, 2001, astronauts installed passive experiment carriers (PECs) on the exterior of the ISS in which were located twenty-eight of the GRC PFTC samples for 1-year space exposure. MISSE PECs for 3-year exposure, which will contain fifty-one GRC PFTC samples, will be installed on the ISS at a later date. Once returned from the ISS, MISSE GRC PFTC samples will be examined for changes in optical and mechanical properties and atomic oxygen (AO) erosion. Additional sapphire witness samples located on the AO exposed trays will be examined for deposition of contaminants.

Dever, Joyce↗
NASA NTRS2002

XTE Observations of Intermediate Polars: RXTE TOO Observations of Supernovae

Two Intermediate Mars were observed with XTE (X-Ray Timing Explorer): PQ Gem and AO Psc. A very preliminary analysis for PQ Gem was presented at the Annapolis Workshop on Magnetic Cataclysmic Variables. At about the same time, the XTE team created a new background estimator for faint sources. The PQ Gem data must be reanalyzed using the new background estimator. The data for AO Psc have been analyzed and await the analysis of PQ Gem.

Schlegel, E.↗
NASA NTRS2003

A Spectral Study of a New Class of Radio Quasars

This document serves as a final technical report for NASA grants NAG5-9995 and NAG5-9533, entitled 'A Spectral Study of a New Class of Radio Quasars.' The purpose of these grants were to support observations made using the BeppoSAX satellite. The observations took place over two years and covered two SAX observing cycles, respectively AO-3 and AO-4. During this time, I was employed both at Johns Hopkins University (NAG5-9995) and the University of Maryland, Baltimore County (NAG5-9533). As the research on these grants was on the same subject and my employment at JHU and UMBC has been consecutive, this document therefore covers both grants. The targets for these observations were four radio-loud quasars chosen from the first two X-ray selected samples of such objects. These were the brightest examples of the newly found class of X-ray loud flat-spectrum radio quasars, which prior to 1997, had never been seen before. However, my previous work with collaborators Paolo Padovani and Paolo Giommi on the DXRBS survey showed that they make up about 25% of the population of flat-spectrum radio quasars, but had not been seen before because of selection biases (all previous samples of these objects had been compiled in the radio). The purpose of the SAX observations was to investigate the shape of their X-ray spectrum, which would tell us where the peak of their synchrotron emission was located.

Perlman, Eric S.↗
NASA NTRS2003

A Survey of Massive Planets by Direct Imaging with Advanced Adaptive Optics

The observations are completed. The observing that has been done essentially on the Canada-France-Hawaii Telescope with the PUEO adaptive optics system, is sufficient to identify approximately 10 Jupiter masses objects around the selected targets. A small amount of data was also collected on the Gemini Telescope with the Hokupa'a adaptive optics system. For most of the stars of the sample, about 30mn of exposure time was collected per epoch, with at least 2 epochs. About 15% of the stars of the sample did not meet these requirements, due to observing difficulties listed below: (1) Guide star is too faint for the AO system; (2) The guide star is a close double (about 0.5 to 1 inch separation), which makes it unsuitable for AO guiding; (3) For a few stars, weather and observing constraints could not allow observations.

Owen, Tobias C.↗
NASA NTRS2002

Results from the GPS Flight Experiment on the High Earth Orbit AMSAT OSCAR-40 Spacecraft

A GPS receiver flying on the High Earth Orbit (HEO) AMSAT-OSCAR 40 (AO-40) spacecraft has been returning GPS observations from high above the altitude of the GPS constellation. AO-40, an amateur radio satellite launched November 16, 2000, is currently in a low inclination, 1000 by 59000 lan altitude orbit. This low-cost experiment utilizes a mid 1990's era, 6-channel, CIA code receiver configured with high gain receiving antennas for tracking above the GPS constellation. The receiver has performed well, despite operating significantly outside of its original design environment. It has regularly returned GPS observations from points all around the orbit, with over ten weeks of GPS tracking data collected to date. Signal to noise levels as high as 48 B-Hz have been recorded near apogee, when the spacecraft was at an altitude of close to 60000 km. GPS side lobe signals have been tracked on several occasions, primarily from Block IIR GPS satellites. Although the receiver has not computed a solution in real-time, point solutions have been computed on the ground using simultaneous measurements from four satellites. This experiment has provided important experience dealing with the many challenges inherent to GPS tracking at high altitudes, and the measurements returned are providing valuable information about the characteristics of GPS signals available for future HE0 users.

Bauer, Frank↗
NASA NTRS2000

The Effect of Low Earth Orbit Atomic Oxygen Exposure on Phenylphosphine Oxide-Containing Polymers

Thin films of phenylphosphine oxide-containing polymers were exposed to low Earth orbit aboard a space shuttle flight (STS-85) as part of flight experiment designated Evaluation of Space Environment and Effects on Materials (ESEM). This flight experiment was a cooperative effort between the NASA Langley Research Center (LaRC) and the National Space Development Agency of Japan (NASDA). The thin film samples described herein were part of an atomic oxygen exposure experiment (AOE) and were exposed to primarily atomic oxygen (~1 X 1019 atoms/cm2). The thin film samples consisted of three phosphine oxide containing polymers (arylene ether, benzimidazole and imide). Based on post-flight analyses using atomic force microscopy, X-ray photoelectron spectroscopy, and weight loss data, it was found that atomic oxygen exposure of these materials efficiently produces a phosphate layer at the surface of the samples. This layer provides a barrier towards further attack by AO. Consequently, these materials do not exhibit linear erosion rates which is in contrast with most organic polymers. Qualitatively, the results obtained from these analyses compare favorably with those obtained from samples exposed to atomic oxygen and or oxygen plasma in ground based exposure experiments. The results of the low Earth orbit atomic oxygen exposure on these materials will be compared with those of ground based exposure to AO.

Connell, John W.↗
NASA NTRS2004

The Hard X-Ray and Coordinated Multifrequency Properties of the Blazar 3C279

Upon our successful AO-1 proposal no. 120085, the quasar 3C 279 has been observed in a coordinated multiwavelength campaign, including INTEGRAL, Chandra, and ground-based radio, near-infrared, and optical observations in June 2003. INTEGRAL observed 3C279 continuously for 300 ksec in INTEGRAL AO-1 between June 1 and June 5,2003. In addition, a Chandra pointing of 5 ksec was done on June 2, the Metsiihovi radio telescope contributed high-frequency radio observations, the SEST observed the source at mm wavelengths, and the 80 cm Turola telescope at La Palma and the 2.3 m telescope at Siding Springs, Australia contributed optical observations.

Collmar, W.↗
NASA NTRS2005

A Survey of Helium Accreting White Dwarfs

We have initiated a survey of the X-ray spectral properties of double white binaries using XMM-Newton. Three of our sources were indeed observed with XMM during AO-3. We have analyzed these data using the latest data reduction software and have also extracted several archival data sets of similar systems from the XMM archive. The first paper presenting the X-ray spectral and variability properties of four of these binary systems has been submitted in January 2005. We have also secured some optical ground-based spectroscopy and are currently analyzing the spectral signatures in more detail. We are also continuing this survey with additional approved XMM observations during AO-4 and anticipate additional publications in the near future.

Steeghs, Daniel↗