SEARCH · Engineering Papers

Results for “ADSORBENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Environmental control system development for manned spacecraft 1960-1973

This paper provides an overview of the development of environmental revitalization techniques from their beginnings in caisson and submarine habitats, up to the present time. The use of CO2 adsorbents, such as LiOH and their application to the first U.S. manned spaceflight is described, together with the beginnings of the regenerable CO2 sorber technology using molecular sieves and its ultimate application to Skylab. The concepts and hardware systems used for atmospheric revitalization on all major U.S. ground-based manned tests is detailed, including CO2 reduction and O2 generation processes. Current research and development efforts are also outlined. The paper concludes with a detailed description of the recently completed SSP, the most advanced and complete ECS that has been fabricated to date.

Popma, D. C.↗

NASA NTRS1974

Reflection of a thick planar shock wave from a coplanar surface

The reflection of a thick shock wave from an adsorbing surface has been studied for argon and neon test gases using the direct simulation Monte Carlo method and laboratory shock-tube experiments. In the simulation, collisions between gas atoms were calculated with a point-center repulsive intermolecular potential, and collisions between gas atoms and the surface were described by a simple two-parameter model which includes the effects of adsorption and thermal accommodation. Experimental data included normal stress and temperature time histories on the surface of a shock-tube and wall. These data and published data of density variations near the end wall were compared with simulation results to assess the influence of adsorption and accommodation on the flowfield and the surface and also to infer optimum values for the surface-interaction model parameters. Good quantitative agreement between simulation and laboratory data was found with this simple surface-interaction model.

Deiwert, G. S.↗

NASA NTRS1974

Abundance of mercury in regolith of the Sea of Fertility, Sea of Tranquillity, and Ocean of Storms

The direct determination of mercury by the atomic fluorescent method is described, involving the pulsed thermal atomization of powdered samples when the mercury is vaporized in argon at normal pressure. An increase in the mercury abundance in the regolith of the surficial layer with decrease in grain size and with variation in depth was noted, from 6 minus 1 million the surficial layer to 9 minus 1 million percent at a depth of about 30 cm. It is shown that in conditions simulating lunar day, at temperatures of 130-150 C up to 15 to 20 percent of the mercury is vaporized from a 2 mg regolith weighed sample, and thus the hypothesis is advanced that mercury is adsorbed by the surface layers of the lunar surface material during lunar night and desorbed during lunar day. The assumption is advanced that there exists a meridional mercury wind between subsolar region of the moon (heater) and the polar regions (cooler).

Belyayev, Y. I.↗

NASA NTRS1975

Reaction of sulfur dioxide with modified 440C, studied by Auger electron spectroscopy and depth profiling

Auger electron spectroscopy and sputtering were used to study the interaction of SO2 with modified 440C, which is a nominally 77-wt%-Fe, 14-wt%-Cr, and 4-wt%-Mo bearing steel with C, S, Si, Ni, V, P, and Mn making up the balance. The sample was polycrystalline. Three temperatures were used: room temperature, 500 C, and 600 C. The reaction time was varied from 30 minutes to 2 hours. A surface cleaned of oxides was the starting point for each reaction. For reactions at 500 C, the major constituents Cr, O, Fe, and S were present in the surface film. At 600 C, the principal constituents of the film were Cr, O, and S with no Fe present. Therefore, a transition in film composition occurred between 500 and 600 C. Oxides were the primary constituents of the films at both temperatures. Room-temperature reactions indicated that SO2 adsorbed dissociatively, with approximately equal quantities of S and O on the surface. For the same reaction time (1 hr) and pressure, a strong temperature dependence of film thickness was observed. The film formed at 600 C was approximately seven times thicker than that formed at 500 C.

Ferrante, J.↗

NASA NTRS1975

Friction behavior of members of the platinum metals group with gold

The adhesion and friction behavior of the platinum metals group was examined with clean surfaces and surfaces selectively contaminated with oxygen, vinyl chloride (C2H3Cl), and methyl mercaptan (CH3SH). A pin or disk specimen configuration was used with the pin being a single crystal of gold of the (111) orientation and with the platinum metal disks also being single crystals of the (111) or (0001) orientation. Loads applied ranged from 1 to 10 g and a sliding velocity of 0.7 mm/min was employed. Results indicate adhesion and transfer of gold to all of the platinum metals. Despite this observation friction differences existed among the metals in the group. These differences are related to surface chemical activity. Adsorption of various friction reducing species was selective. With some adsorbates present strong adhesive forces between metals were still observed.

Buckley, D. H.↗

NASA NTRS1975

Effect of various material properties on the adhesive stage of fretting

Various properties of metals and alloys have been studied with respect to their effect on the initial stage of the fretting process, namely adhesion. Crystallographic orientation, crystal structure, interfacial binding energies of dissimiliar metal, segregation of alloy constituents and the nature and structure of surface films have all been found to influence adhesion. High atomic density, low surface energy grain orientations exhibit lower adhesion than other orientations. Hexagonal metals in general manifest less adhesive wear than cubic metal. Knowledge of interfacial surface binding energies can assist in predicting adhesive transfer and wear. Selective surface segregation of alloy constituents can accomplish both a reduction in adhesion and improved surface oxidation characteristics. Equivalent surface coverages of various adsorbed species indicate that some are markedly more effective in inhibiting adhesion than others.

Buckley, D. H.↗

NASA NTRS1975

Wear and interfacial transport of material

Bonding across the interface for two solids in contact and the subsequent transfer of material from one surface to another is a direct result of the interfacial bonds being stronger than the cohesive bonds in either of the two solids. Surface tools such as LEED, Auger emission spectroscopy, field ion microscopy, and the atom probe are used to examine adhesive contacts and to determine the direction, nature, quantity of material transfer and properties of the solids which effect transfer and wear. The electronic nature, cohesive binding energies, surface structure, lattice disregistry and distribution of species in surface layers are all found to effect adhesion and transfer or transport for clean surfaces in solid state contact. The influence of adsorbed and reacted surface films from fractions of a monolayer to multilayer reactive films are considered. It is shown that even fractions of a monolayer of surface active species such as oxygen and sulfur can markedly inhibit adhesion and transport.

Buckley, D. H.↗

NASA NTRS1975

Chemisorption kinetics of hydrogen on evaporated iron films

Measurements were made of the isothermal adsorption-desorption kinetics for H2 chemisorbed onto Fe films. The chemisorption process is observed to proceed via a precursor state of adsorbed molecular hydrogen similar to the H2-Ni system. The first measurements of the activation energy for desorption, and estimates of the values of the fast kinetic rates between the precursor and chemisorbed states are reported. Adsorption into the precursor state does not appear to be activated, but the process connecting the precursor state with the chemisorbed state will, under certain circumstances, be a rate limiting step for adsorption. The effects of contamination of the surface are evidenced in the measurements.

Shanabarger, M. R.↗

NASA NTRS1974

Effect of various material properties on the adhesive stage of fretting

Buckley, D. H.↗

NASA NTRS1975

Basicity of aromatic amines from liquid chromatographic behavior

A liquid chromatographic investigation was conducted to determine whether the adsorption of weakly basic aromatic amines on slightly acidic silica gel adsorbents could be used to study their relative basicity. Under proper conditions, a linear correlation between pKb and log of capacity factor was observed. This finding may prove useful in helping to predict the relative basicity of closely related aromatic diamines, especially new amines being synthesized for polymer synthesis.

Young, P. R.↗

NASA NTRS1975

Auger spectroscopy of HCl interaction with Al at low pressures

The purpose of the present study was to determine some adsorption characteristics of HCl with partially clean polycrystalline Al by Auger electron spectroscopy. The adsorption was found to exhibit a Freundlich-type behavior pattern in which the number of molecules adsorbed varied with HCl pressure linearly on a log-log plot. Assuming that the adsorption behaves according to the Clausius-Clapeyron equation, the isosteric heat of adsorption increases with coverage at low pressures, appearing to approach a constant value of 4-5 kcal/mole.

Lassiter, W. S.↗

NASA NTRS1975

Development of a comet as it pursues its orbit

The properties of cometary dust-swarms in almost parabolic long-period orbits are examined. The effect of passage of the solar system through interstellar gas clouds is shown to be capable of affecting substantially the angular momentum of a comet about the sun, thus accounting for the existence of comets with high values of perihelion distance. The same process would enable cometary particles to adsorb interstellar gases and regenerate their gas content.

Lyttleton, R. A.↗

NASA NTRS1975

Gas chromatographic column for the Viking 1975 molecular analysis experiment

A gas chromatographic column has been developed for use in the remote analysis of the Martian surface. The column, which utilizes a liquid-modified organic adsorbent (Tenax) as the stationary phase, provides efficient transmission and resolution of nanogram quantities of organic materials in the presence of millionfold excesses of water and carbon dioxide.

Novotny, M.↗

NASA NTRS1975

Volatile organic components in the Skylab 4 spacecraft atmosphere

The volatile organic components in the spacecraft cabin atmosphere of Skylab 4 were trapped on a solid adsorbent at various times during the mission. In post-flight analyses, more than 300 compounds in concentrations from less than 1 ppb up to 8000 ppb could be detected by high-resolution gas chromatography. In the samples of the 11th, 47th, and 77th day of the mission, approximately 100 components in the molecular weight range from 58 to 592 were identified by mass spectrometry. Besides components known from other environments, such as alkanes, alkenes, and alkylated aromatic hydrocarbons, components typical of the human metabolism, such as ketones and alcohols, were found. Other typical components in the spacecraft atmosphere included fluorocarbons and various silicone compounds, mostly normal and cyclic methylsiloxanes.

Liebich, H. M.↗

NASA NTRS1975

Atomic nitrogen measurements in the upper atmosphere

The open-source neutral mass spectrometer (OSS) on the Atmosphere Explorer-C satellite (AE-C) measures the neutral constituents of the upper atmosphere. It has been found that atomic nitrogen densities can be determined at altitudes above 380 km. Most of the nitrogen atoms combine with oxygen adsorbed on the walls of the ion source to form NO. The measured net peaks at 14 amu and 30 amu show the scale height expected for atomic nitrogen; both peaks have a pronounced diurnal variation. Absolute number densities at 400 km are computed for a time period between February and April 1974 when measurements were taken in the northern hemisphere. Minimum and maximum densities of atomic nitrogen occur between 4 and 6 hr LST in the morning and around 16 hr LST in the afternoon, respectively. At 400 km, the minimum particle density is 100,000/cu cm and the maximum density 1.5 million/cu cm. In contrast to the response of N2 to geomagnetic activity, atomic N shows no appreciable effect.

Mauersberger, K.↗

NASA NTRS1975

Asymmetric adsorption by quartz - A model for the prebiotic origin of optical activity

One mechanism previously proposed for the abiotic accumulation of molecules of one chirality in nature is asymmetric adsorption on the chiral surfaces of optically active quartz crystals. Earlier literature in this field is reviewed, with the conclusion that previous investigations of this phenomenon, using optical rotation criteria, have afforded ambiguous results. We now have studied the adsorption of radioactive D- and L-alanine on powdered d- and l-quartz, using change in radioactivity level as a criterion for both gross and differential adsorption, d-Quartz preferentially adsorbed D-alanine from anhydrous dimethyl-formamide solution, and l-quartz L-alanine. The differential adsorption varied between 1.0 and 1.8%. The implications of these observations are discussed from the viewpoint of early chemical evolution and the origin of optically active organic compounds in nature.

Bonner, W. M.↗

NASA NTRS1973

Martian surface weathering studies

The nature of the Martian surface was characterized by means of its reflectance properties. The Mariner 9 photography was used to establish terrain units which were crossed by the Mariner 6 and 7 paths. The IR reflectance measured by the IR spectrometers on these spacecraft was to be used to indicate the nature of the surface within these units. There is an indication of physical size and/or compositional variation between units but too many natural parameters can vary (size, shape, composition, adsorbed phases, reradiation, atmospheric absorbtion, temperature gradients, etc.) to be certain what effect is causing those variations observed. It is suggested that the characterization could be fruitfully pursued by a group which was dedicated to peeling back the layers of minutia affecting IR reflectance.

Calvin, M.↗

NASA NTRS1975

Friction differences between aliphatic and aromatic structures in lubrication of titanium

Sliding friction experiments were conducted with a titanium (0001) single crystal surface with various adsorbed aliphatic and aromatic compounds containing the same number of carbon atoms. An Auger emission spectroscopy analysis was used to monitor the presence of the organic lubricating compounds. Results of the investigation indicate that hexane and benzene give the same friction coefficients over a range of loads. At light loads the friction decreased with an increase in the halogen atom size where the halogens chlorine, bromine, and iodine are incorporated into the benzene molecular structure. The aliphatic compounds chlorohexane and bromohexane exhibited lower friction coefficients than the aromatic structures chlorobenzene and bromobenzene.

Buckley, D. H.↗