Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wind forecasting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

UNCERTAINTY-AWARE DEEP LEARNING FRAMEWORK FOR FORECASTING COASTAL WATER LEVEL IN VIRGINIA BEACH

Coastal areas like Virginia Beach, USA, are increasingly vulnerable to flooding. To mitigate the impact of flooding, it is crucial for the City of Virginia Beach to have reliable 72-hour-ahead (3 days) forecasts of water levels at key gauge locations. To support this effort, several sensors have been installed throughout the city to monitor water levels and other environmental parameters such as wind speed, precipitation, and atmospheric pressure. Leveraging sensor data from one of these locations, we developed an uncertainty-aware deep learning model to forecast water levels. We employed deep quantile regression (DQR) to quantify variability in the predictions and examined the performance of three different model architectures. In addition to exclusively including historical data, we investigated the improvement wind forecasts provide to the accuracy of 72-hour-ahead water level predictions. The results show a twelvefold improvement in the flood forecast for a real flooding event.

Hasan, Mahmud [Thomas Jefferson National Accelerat↗
DOE OSTI2025

Lidar-Based Evaluation of HRRR Performance in California’s Diablo Range

The performance of the NOAA High-Resolution Rapid Refresh (HRRR) model for capturing low-level winds near a wind energy production site during summer 2019 is evaluated. This study catalogs the ability of HRRR to predict boundary layer dynamics relevant to wind energy interests over complex terrain, which has presented challenges for weather and energy forecasting. Performance is evaluated by comparing HRRR output to wind-profiling Doppler lidars at Lawrence Livermore National Laboratory Site 300. HRRR captured the diurnal profile of horizontal winds in the observed 150-m layer, despite strong underpredictions (∼4 m s −1 ) during evening and nighttime hours. These underpredictions may be a result of local speedup flows observed by the lidars, which were unresolved in HRRR due to their small spatial extent. HRRR bias magnitude relative to observations was found to be minimal during days with synoptic-scale troughs and strong 850-hPa geopotential gradients, while bias magnitude was maximal during days with synoptic ridging and weak 850-hPa geopotential gradients. To translate wind speed predictions to energy forecasting, generic turbine models were used to estimate power generation for turbines characteristic of the nearby Altamont Pass Wind Resource Area. Results show that HRRR-based energy estimates predicted daytime power generation adequately relative to lidar-based estimates with an 18-h lead time (bias magnitude < 0.4 MW from 0900 to 1400 LT) but overpredicted power during the rest of the diurnal cycle (bias > 1 MW). These results demonstrate conditions under which HRRR performs well for wind energy applications in complex terrain, while highlighting biases that require further investigation to support usage of a high-resolution model for wind energy forecasts.

Boundary layer↗
DOE OSTI2024

Integration of New Technology Considering the Trade-Offs Between Operational Benefits and Risks: A Case Study of Dynamic Line Rating

Electric grid operators are adept at handling complexity and uncertainty. However, with increasing introduction of renewable generation, distributed energy resources, and more frequent severe weather events, operators will experience new workload and challenging decision scenarios. Here, this paper quantifies risks and benefits from an operator's perspective of introducing weather based forecast Dynamic Line Ratings (DLR) using variable wind conditions in addition to ambient temperature to relieve transmission congestion and facilitating more offshore wind (OSW). A concept of operations (CONOPS) applied to a forecast DLR implementation and its integration with OSW is defined. A method for evaluating tradeoffs of derating to make the rating more conservative but decreasing the benefit was developed and applied to a case study for two existing overhead transmission lines on Long Island, New York. The CONOPS uses historical day-ahead and hour-ahead High Resolution Rapid Refresh weather forecasts and weather station data to support planning and real-time operations. The analysis determines the risk of downgrades in real-time operational rating compared to the forecast and quantifies the frequency and severity of last-minute downgrades. The risk is compared against the benefits in increased capacity to provide insights on the additional amount of uncertainty DLR and OSW will add to the operator's workload.

17 WIND ENERGY↗
DOE OSTI2025

Simulating Marine Stratocumulus Clouds using Lagrangian Superdroplet Method in ERF

This study investigates the simulation of marine stratocumulus (stratoCu) clouds – common in many offshore and coastal wind energy regions - using Lagrangian Superdroplet Method (SDM) implemented in Energy Research and Forecasting (ERF) model. Developed by the Wind Energy Technologies Office (WETO), ERF is a high-resolution atmospheric modeling tool that relies on traditional bulk microphysics schemes. Under an LLNL-led Laboratory Directed Research and Development (LDRD) project, SDM was integrated into ERF to improve cloud process fidelity by explicitly tracking individual “superdroplets”. This enables a realistic representation of the droplet size spectrum, cloud-atmosphere interactions, and potential feedbacks from wind plants on atmospheric flow and cloud structure.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Simulations suggest offshore wind farms modify low-level jets

Abstract. Offshore wind farms are scheduled to be constructed along the East Coast of the US in the coming years. Low-level jets (LLJs) – layers of relatively fast winds at low altitudes – also occur frequently in this region. Because LLJs provide considerable wind resources, it is important to understand how LLJs might change with turbine construction. LLJs also influence moisture and pollution transport; thus, the effects of wind farms on LLJs could also affect the region’s meteorology. In the absence of observations or significant wind farm construction as yet, we compare 1 year of simulations from the Weather Research and Forecasting (WRF) model with and without wind farms incorporated, focusing on locations chosen by their proximity to future wind development areas. We develop and present an algorithm to detect LLJs at each hour of the year at each of these locations. We validate the algorithm to the extent possible by comparing LLJs identified by lidar, constrained to the lowest 200 m, to WRF simulations of these very low LLJs (vLLJs). In the NOW-WAKES simulation data set, we find offshore LLJs in this region occur about 25 % of the time, most frequently at night, in the spring and summer months, in stably stratified conditions, and when a southwesterly wind is blowing. LLJ wind speed maxima range from 10 m s−1 to over 40 m s−1. The altitude of maximum wind speed, or the jet “nose”, is typically 300 m above the surface, above the height of most profiling lidars, although several hours of vLLJs occur in each month in the data set. The diurnal cycle for vLLJs is less pronounced than for all LLJs. Wind farms erode LLJs, as LLJs occur less frequently (19 %–20 % of hours) in the wind farm simulations than in the no-wind-farm (NWF) simulation (25 % of hours). When LLJs do occur in the simulation with wind farms, their noses are higher than in the NWF simulation: the LLJ nose has a mean altitude near 300 m for the NWF jets, but that nose height moves higher in the presence of wind farms, to a mean altitude near 400 m. Rotor region (30–250 m) wind veer is reduced across almost all months of the year in the wind farm simulations, while rotor region wind shear is similar in both simulations.

17 WIND ENERGY↗
DOE OSTI2026

Differences in cluster and internal wake effects from mesoscale and large-eddy simulations off the US East Coast

Mesoscale simulations are increasingly used to estimate wake effects within and between large wind farms, despite limited validation for large-scale wake effects. This study evaluates the capabilities and limitations of mesoscale simulations in capturing wake-induced impacts on wind turbine power production through a direct comparison with large-domain large-eddy simulations (LESs) for three planned offshore wind farms under realistic atmospheric conditions and a range of atmospheric stabilities. We assess mesoscale performance in replicating wake characteristics behind single and multiple turbine clusters and quantify the resulting variability in mean turbine power. Results show that mesoscale Weather Research and Forecasting simulations with the Fitch wind farm parameterization capture key features of the velocity deficit downstream of both single and multiple wind farms, with mean root-mean-square errors near 5 % and good agreement with stability-driven wake behavior. However, in these simulations, the mesoscale Fitch parameterization underestimates power losses from internal wake effects, particularly when turbines align with the prevailing wind direction or under stable stratification. In these conditions, individual wakes persist and dominate downstream power deficits. The coarse resolution of the mesoscale simulations limits their ability to resolve individual wind turbine wakes that drive power fluctuations within wind farms. Nonetheless, mesoscale simulations can yield accurate estimates of combined wake losses from internal and cluster effects across some wind direction sectors, where errors in wake representation may cancel each other out. These findings underscore the strengths of mesoscale simulations for capturing broader wake patterns while highlighting their limitations for modeling turbine-level power losses. Future work should explore hybrid modeling approaches to capture both long-range cluster wake propagation and localized internal wake dynamics.

17 WIND ENERGY↗
DOE OSTI2025

Quantifying Uncertainties in Modeling Wind Resource Data from Different PBL Schemes in the WRF Model: A Case Study Over the Puerto Rico Region

This study examines the modeling uncertainty of wind resource data stemming from the use of various planetary boundary layer (PBL) parameterizations available in the Weather Research and Forecasting (WRF) model. WRF-based wind simulations spanning 20 years at 3-km resolution using 11 different PBL schemes are used to objectively investigate the uncertainty in modeling wind speed for land-based wind (LBW) and offshore wind (OSW) locations in Puerto Rico. The uncertainty in the wind modeling for the 20-year dataset is quantified using the spread index (SI) and standard deviation (SD). For virtual LBW and OSW sites, the SI and SD values are analyzed as calculated across various spatial and temporal scales. Because the PBL's atmospheric stability conditions can be characterized into two dominant categories, the study focuses on analyzing the SI and SD for daytime (mainly unstable PBL conditions) and nighttime (mainly stable PBL conditions). For wind shear (10 m-200 m) at the OSW and LBW sites, WRF-based numerical experiments indicate the following SI (or SD) ranges: 39%-94% (0.74 m/s-1.44 m/s) during the daytime for OSW, 50%-75% (0.68 m/s-1.19 m/s) during the daytime for LBW, 37%-60% (0.73 m/s-1.12 m/s) during the nighttime for OSW, and 57%-143 % (0.65 m/s-1.43 m/s) during the nighttime for LBW. While a high SI is observed when modeling LBW during the nighttime, there are notable modeling uncertainties during the daytime on the leeward side of the orographic barriers for Puerto Rico.

17 WIND ENERGY↗
DOE OSTI2025

Effects of Atmosphere and Ocean Horizontal Model Resolution on Tropical Cyclone and Upper-Ocean Response Forecasts in Four Major Hurricanes

A coupled atmosphere–ocean model is necessary for tropical cyclone (TC) prediction to accurately characterize ocean feedback on atmospheric processes within the TC environment. Here, the ECMWF coupled global model is run at horizontal resolutions from 9 to 1.4 km in the atmosphere, as well as 25 and 8 km in the ocean, to identify how resolution impacts forecast accuracy of four observed major TCs in the Atlantic: Irma, Florence, Teddy, and Ida. Most of the resolutions used here are unprecedented for global models. GOES-16 and synthetic aperture radar (SAR) satellite images and best track data are used for atmospheric validation. Salinity and temperature observations from Air-Launched Autonomous Micro-Observer (ALAMO) floats are used to validate modeled upper-ocean response, including mixed layer deepening, sea surface cooling, and near-inertial waves in the wakes of TCs. Increasing atmospheric resolution leads to more realistic TC structure and stronger winds, significantly improving TC intensity forecasts and modestly improving track errors. Ocean resolution impacts the upper-ocean response but does not influence atmospheric forecasts for the fast-moving TCs considered here. Stronger mixing, sea surface cooling, and near-inertial oscillations are found for both higher atmosphere and ocean resolutions, provided the initial upper-ocean state is the same for the two ocean resolutions. Whether this agrees better with the ALAMO observations also depends on the realism of the initial upper-ocean state in the model, emphasizing the importance of ocean initialization for the accurate upper-ocean response. Overall, the model at all resolutions correctly predicts stronger mixing, surface cooling, and near-inertial oscillation amplitudes to the right of a TC center, as observed by ALAMO floats.

Atmosphere-ocean interaction↗
DOE OSTI2025

Simulated meteorological impacts of offshore wind turbines and sensitivity to the amount of added turbulence kinetic energy

Offshore wind energy projects are currently in development off the east coast of the United States and may influence the local meteorology of the region. Wind power production and other commercial uses in this area are related to atmospheric conditions, and so it is important to understand how future wind plants may change the local meteorology. In the absence of measurements of potential wind plant impacts on meteorology, simulations offer the next-best possible insight into wake effects on boundary layer height, temperature, fluxes, and wind speeds. However, simulation tools that capture these effects offer multiple options for representing the amount of turbine-added turbulence that may impact assessments of micrometeorological effects. To explore this sensitivity, we compare 1 year of simulations from the Weather Research and Forecasting (WRF) model with and without wind plants incorporated, focusing on the lease area south of Massachusetts and Rhode Island. The simulations with wind plants are repeated to include both the maximum and minimum amounts of added turbulence to provide bounds on the potential impacts. We assess changes in wind speeds, 2 m temperature, surface heat flux, turbulence kinetic energy (TKE), and boundary layer height during different stability classifications and ambient wind speeds over the entire year and compare results for the degree of added turbulence in the wind plant simulations. Because the wake behavior may be a function of boundary layer stability, in this paper, we also present a machine learning algorithm to quantify the area and distance of the wake generated by the wind plant. This analysis enables us to identify the relationship between wake extent and boundary layer height. We find that hub-height wind speed is reduced within and downwind of the wind plant, with the strongest impacts occurring during stable conditions and faster wind speeds in region 3 of the turbine power curve, although impacts lessen as wind speeds increase past 15 m s−1. In contrast, wind speeds near the surface decrease when no turbine-added turbulence is included but can increase for stably stratified conditions when 100 % of possible TKE is included in the simulations. TKE increases at hub height in the simulations with added TKE for all stability classes, suggesting that atmospheric stability does not immediately modify the TKE generated by turbines. Negligible changes in hub-height TKE manifest in the simulations without the added TKE. At the surface, TKE increases in the simulations with maximum added turbulence only for unstable conditions. In the no-added-turbulence simulations, surface TKE decreases slightly in neutral and unstable simulations. Differences in 2 m temperatures and surface heat fluxes are small but vary considerably with atmospheric stability and the amount of added TKE. Boundary layer heights increase within the wind plant when turbine-added turbulence is included and decrease slightly downwind during stable conditions. In contrast, with no added turbulence, the boundary layer height is in general reduced in stable conditions with wind speeds less than 15 m s −1 and slightly increased in neutral conditions. Finally, shallower upwind boundary layer heights tend to correlate with larger wake areas and distances, though other factors likely also play a role in determining the extent of the wind plant wake. These simulation-based results provide a bound for micrometeorological impacts of wind plant wakes: simulations that couple the atmosphere to the ocean may reduce these impacts, and we await observational verification.

17 WIND ENERGY↗
DOE OSTI2025

Comparative Evaluation of the Ability of the MYNN‐EDMF PBL Scheme in WRF Model to Reproduce Near Surface Wind Speed Over Different Topographical Types

Abstract This study systematically evaluates the performance of the Mellor‐Yamada‐Nakanishi‐Niino‐Eddy‐Diffusion‐Mass‐Flux planetary boundary layer (PBL) scheme within the Weather Research and Forecasting (WRF) model in simulating near‐surface wind speeds across various topographies in New York State (NYS). Simulated wind speeds are compared with in‐situ measurements from 22 surface sites, grouped into six topographic categories: continental plain (CT), lakeside (LS), river valley (RV), Long Island (LI), Block Island (BI), and offshore ocean (OO). A quantitative evaluation based on Relative Euclidean Distance shows that wind speeds at the OO site are the most accurately reproduced, followed by those at LI sites, while the model performs less accurately for the remaining topographic groups. Wind speeds over CT sites tend to be overestimated by approximately 1 m/s, although their diurnal variability (DV) is well captured. In contrast, the model underestimates wind DV at LS, RV, LI, and BI sites, with the largest biases occurring at LI and BI, resulting in underestimated daytime wind speed and/or overestimated nighttime wind speed. The OO winds exhibit minimal diurnal variation, accurately captured by our WRF model. The surface wind diurnal variation is closely linked to PBL development. Among the indicators of PBL development, surface potential temperature biases most strongly correlate with wind speed biases. Our WRF model faces challenges in capturing the distinctions between winds influenced by local circulations and those over continental plains, and the significantly stronger winds at OO compared to BI. Potential causes for these biases are discussed, offering pathways for improving surface wind simulations in future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Short‐Term Hourly Weather Forecasting Using PredRNN With Image Preprocessing

Global weather forecast models are vital tools with numerous applications, including public safety, agriculture, and transportation. Recent advancements in artificial intelligence (AI) and deep learning (DL) have shown the potential to enhance weather forecasting accuracy and speed. In this study, we developed a short-term hourly weather forecast framework with a wavelet transform function for data preprocessing and a spatiotemporal DL model, PredRNN, for predicting five surface atmospheric variables, including wind speed and direction, mean sea level pressure (MSLP), temperature, and precipitation. The framework demonstrated promising results. It produces global forecasts at 0.25° (∼25 km) with a 1-day lead time RMSE of 1.8 m/s for wind components, 180 Pa for MSLP, and 1.8 K for temperature. Although our model does not surpass state-of-the-art AI weather forecast models across all metrics, it outperforms these models in precipitation forecasting and wind prediction at short lead times and achieves comparable accuracy for MSLP. Its native hourly forecasting capability, together with training on widely accessible GPU hardware, contributes meaningfully to the advancement of accessible DL weather forecasting methods. Our work highlights the importance of integrating temporal components and data transformation techniques to improve the predictability and accuracy of weather forecasts.

Tran, Hoang [Pacific Northwest National Laboratory↗
DOE OSTI2025

Data efficiency assessment of generative adversarial networks in energy applications

This study investigates the data requirements of generative artificial intelligence (AI), particularly generative adversarial networks (GANs), for reliable data augmentation in energy applications. Generative AI, though seen as a solution to data limitations, requires substantial data to learn meaningful distributions—a challenge often overlooked. This study addresses the challenge through synthetic data generation for critical heat flux (CHF) and power grid demand, focusing on renewable and nuclear energy. Two variants of GAN employed are conditional GAN (cGAN) and Wasserstein GAN (wGAN). Our findings include the strong dependency of GAN on data size, with performance declining on smaller datasets and varying performance when generalizing to unseen experiments. Mass flux and heated length significantly influence CHF predictions. wGAN is more robust to feature exclusion, making it suitable for constrained synthetic data generation. In energy demand forecasting, wGAN performed well for solar, wind, and load predictions. Longer lookback hours and larger datasets improved predictions, especially for load power. Seasonal variations posed challenges, with wGAN achieving a relatively high error of Root Mean Squared Error (RMSE) of 0.32 for load power prediction, compared to RMSE of 0.07 under same-season conditions. Feature exclusions impacted cGAN the most, while wGAN showed greater robustness. This study concludes that, while generative AI is effective for data augmentation, it requires substantial data and careful training to generate realistic synthetic data and generalize to new experiments in engineering applications.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

A Large-Eddy Simulation Study in WRF on Wind over Broadband Waves of Different Directions and Spreading Widths

We use the Weather Research and Forecasting (WRF) Model coupled with moving waves to conduct large-eddy simulations (LESs) of wind over broadband waves with different propagating directions and spreading widths. Our results show that wind-opposing waves can double the form drag, and the wave propagating direction affects the mean wind velocity, velocity variances, and pressure stress. On the other hand, waves with wider spread tend to reduce the form drag in the streamwise direction. Results further indicate that the wave direction can impact the bulk drag coefficient by as much as 25%, while the wave directional spreading width can change it by 5%. Based on our wave-phase-resolved simulations, we demonstrate that the parameterization of sea surface roughness is significantly influenced by the direction of wave propagation relative to the wind, a factor that the commonly used Charnock relation does not account for.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Evaluating mesoscale model predictions of diurnal speedup events in the Altamont Pass Wind Resource Area of California

Mesoscale model predictions of wind, turbulence, and wind energy capacity factors are evaluated in the Altamont Pass Wind Resource Area of California (APWRA), where the diurnal regional sea breeze and associated terrain-driven speedup flows drive wind energy production during the summer months. Results from the Weather Research and Forecasting model version 4.4 using a novel three-dimensional planetary boundary layer (3D PBL) scheme, which treats both vertical and horizontal turbulent mixing, are compared to those using a well-established one-dimensional (1D) scheme that treats only vertical turbulent mixing. Each configuration is evaluated over a nearly 3-month-long period during the Hill Flow Study, and due to the recurring nature of the observed speedup flows, diurnal composite averaging is used to capture robust trends in model performance. Both model configurations showed similar overall skill. The general timing and direction of the speedup flows is captured, but their magnitude is overestimated within a typical wind turbine rotor layer. Both also fail to capture a persistent observed near-surface jet-like flow, likely due to the limited grid resolution that is typical of mesoscale models. However, the 3D PBL configuration shows several minor improvements over the 1D PBL configuration, including improved wind speed and turbulence kinetic energy profiles during the accelerating phase of the speedup events, as well as reduced positive wind speed bias at surface stations across the APWRA region. Using a mesoscale wind farm parameterization, modeled capacity factors are also compared to monthly data reported to the US Energy Information Administration (EIA) during the study period. Although the monthly trend in the data is captured, both model configurations overestimate capacity factors by roughly 7 %–11 %. Through model evaluation, this study provides confidence in the 3D PBL scheme for wind energy applications in complex terrain and provides guidance for future testing.

17 WIND ENERGY↗
DOE OSTI2026

Performance of reanalysis and mesoscale models off the coast of Hawai'i

The eastern Hawai'i coast in the United States is characterized by considerable wind resource fuelled by persistent trade winds, making it an important area for energy research. The need is strong for reanalyses and higher-resolution regional simulations where observations have been historically limited, such as Hawai'i's offshore environments. However, studies using offshore observations in other parts of the world have shown that significant errors can occur in reanalyses and wind datasets, which can lead to inaccurate estimates of wind energy generation, payback periods, and extreme weather risks at project locations. The degree of such errors is influenced by a number of factors, including spatial resolution and the handling of processes within the planetary boundary layer (PBL). In this work, we provide a wind resource characterization from year-long lidar buoy measurements off the eastern coast of O'ahu, Hawai'i, an environment previously unobserved at the rotor level, and use the characterization to evaluate the performance of two simulation datasets. The O'ahu deployment location is meteorologically unique and less complex than land-based wind resource characterizations, being strongly characterized by trade winds with minimal land–atmosphere interaction influences. Despite the unique and fairly consistent meteorological conditions, we hypothesize that distinct simulation datasets will exhibit diverse ranges of errors similar to those that have been seen for other offshore locations. We find the European Centre for Medium-Range Weather Forecasts (ECMWF) Reanalysis version 5 (ERA5) to strongly underestimate observed wind speeds at the O'ahu location (bias = −1.54 m s −1 at a height of 140 m above sea level), while a regional Weather Research and Forecasting Model (WRF) simulation produced by the University of Hawai'i (UH-WRF) provides a significantly smaller wind speed bias (−0.25 m s −1 ), highlighting the value of running regional, higher-resolution simulations. The large bias noted for ERA5 is driven by significant underestimation of fast wind speeds (>9 m s −1 ), which the study site is largely characterized by, along with discontinuities in the ERA5 diurnal cycle. We also speculate that the relative sparsity of observations for data assimilation in this remote part of the world could influence the performance of ERA5 and that challenges with characterizing island effects could impact the performance of both datasets.

17 WIND ENERGY↗
DOE OSTI2025

On the effectiveness of neural operators at zero-shot weather downscaling

Machine-learning (ML) methods have shown great potential for weather downscaling. These data-driven approaches provide a more efficient alternative for producing high-resolution weather datasets and forecasts compared to physics-based numerical simulations. Neural operators, which learn solution operators for a family of partial differential equations, have shown great success in scientific ML applications involving physics-driven datasets. Neural operators are grid-resolution-invariant and are often evaluated on higher grid resolutions than they are trained on, i.e., zero-shot super-resolution. Given their promising zero-shot super-resolution performance on dynamical systems emulation, we present a critical investigation of their zero-shot weather downscaling capabilities, which is when models are tasked with producing high-resolution outputs using higher upsampling factors than are seen during training. To this end, we create two realistic downscaling experiments with challenging upsampling factors (e.g., 8x and 15x) across data from different simulations: the European Centre for Medium-Range Weather Forecasts Reanalysis version 5 (ERA5) and the Wind Integration National Dataset Toolkit. While neural operator-based downscaling models perform better than interpolation and a simple convolutional baseline, we show the surprising performance of an approach that combines a powerful transformer-based model with parameter-free interpolation at zero-shot weather downscaling. We find that this Swin-Transformer-based approach mostly outperforms models with neural operator layers in terms of average error metrics, whereas an Enhanced Super-Resolution Generative Adversarial Network-based approach is better than most models in terms of capturing the physics of the ground truth data. We suggest their use in future work as strong baselines.

17 WIND ENERGY↗
DOE OSTI2025

Airport Delay Prediction with Temporal Fusion Transformers

Since flight delay hurts passengers, airlines, and airports, its prediction becomes crucial for the decision-making of all stakeholders in the aviation industry and thus has been attempted by various previous research. However, previous delay predictions are often categorical and at a highly aggregated level. To improve that, this study proposes to apply the novel Temporal Fusion Transformer model and predict numerical airport arrival delays at quarter hour level for U.S. top 30 airports. Inputs to our model include airport demand and capacity forecasts, historic airport operation efficiency information, airport wind and visibility conditions, as well as en-route weather and traffic conditions. The results show that our model achieves satisfactory performance measured by small prediction errors on the test set. In addition, the interpretability analysis of the model outputs identifies the important input factors for delay prediction.

Liu, Ke [University of California Berkeley]↗
DOE OSTI2025

Urban heat islands can influence the wind energy resource during heatwaves

Urban wind energy is critical for sustainable electricity generation in cities. However, little research has explored how the urban heat island (UHI) effect influences wind energy, particularly in heatwaves when energy demand surges. In this study, we examine wind energy distribution in the Boston–Providence metropolitan area during heatwaves, using Weather Research and Forecasting (WRF) model integrated with Building Energy Parameterization/Building Energy Model (BEP/BEM). Two scenarios, a realistic case and a hypothetical case without urban warmth, were compared to isolate UHI impacts. Results reveal that UHI induces a "wind energy loss zone" in this urban area, reducing wind power density (WPD) by 20–30 W/m 2 at 50–100 m, while suburban/rural areas exhibit a "wind energy gain zone," with WPD increases up to 40 W/m 2 at 150–200 m. These losses diminish with distance from urban centers and become negligible beyond main urban and suburban sprawl. Heatwave expands the urban "loss zone", while amplifying wind energy gains in suburban/rural areas, driven by stronger thermal gradients and weakened background winds that intensify air convergence in urban and urban-rural circulations, thereby exacerbating urban wind energy losses by 15–20 %. An analysis of 235 wind farms using turbine power curves reveals that built areas dependent on stand-alone or off-grid turbines face significant energy deficits during a heatwave. Wind energy drops by up to 25 %, while cooling-related building energy demand rises 30–40 % during a heatwave. These findings underscore the need for strategic urban wind energy planning to ensure reliable power during extreme heat.

Energy - Wind↗