Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “volcanic rocks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Iodine effective diffusion coefficients through volcanic rock: Influence of iodine speciation and rock geochemistry

Accurate prediction of the subsurface transport of iodine species is important for the assessment of long-term nuclear waste repository performance, as well as monitoring compliance with the Comprehensive Nuclear-Test-Ban Treaty, given that radioiodine decays into radioxenon. However, the transport of iodine through intact geologic media is not well understood, compromising our ability to assess risk associated with radioiodine migration. The current study's goal is to quantify the matrix diffusion of iodine species through saturated volcanic rock, with particular attention paid to the redox environment and potential speciation changes. Here, diffusion experiments were run for iodide through lithophysae-rich lava, lithophysae-poor lava, and welded tuff, whereas iodate diffusion was studied through welded tuff. Iodine transport was compared with a conservative tracer, HDO, and effective diffusion coefficients were calculated. Likely due to a combination of size and anion exclusion effects, iodine species diffused more slowly than the conservative tracer through all rock types tested. Furthermore, oxidation of iodide to iodate was observed in the lithophysae-poor lava, affecting transport. Results provide much needed data for subsurface transport models that predict radioiodine migration from underground sources, and indicate the pressing need for geochemical and redox interactions to be incorporated into these models.

58 GEOSCIENCES↗
NASA NTRS1988

Nature and origin of mineral coatings on volcanic rocks of the Black Mountain, Stonewall Mountain, and Kane Springs Wash volcanic centers, Southern Nevada

Comparative lab spectra and Thematic Mapper imagery investigations at 3 Tertiary calderas in southern Nevada indicate that desert varnish is absorbant relative to underlying host rocks below about 0.7 to 1.3 microns, depending on mafic affinity of the sample, but less absorbant than mafic host rocks at higher wavelengths. Desert varnish occurs chiefly as thin impregnating films. Distribution of significant varnish accumulations is sparse and localized, occurring chiefly in surface recesses. These relationships result in the longer wavelength bands and high 5/2 values over felsic units with extensive desert varnish coatings. These lithologic, petrochemical, and desert varnish controlled spectral responses lead to characteristic TM band relationships which tend to correlate with conventionally mappable geologic formations. The concept of a Rock-Varnish Index (RVI) is introduced to help distinguish rocks with a potentially detectable varnish. Felsic rocks have a high RVI, and those with extensive desert varnish behave differently, spectrally, from those without extensive varnish. The spectrally distinctive volcanic formations at Stonewall Mountain provide excellent statistical class segregation on supervised classification images. A binary decision rule flow-diagram is presented to aid TM imagery analysis over volcanic terrane in semi-arid environments.

Taranik, James V.↗
NASA NTRS1987

Nature and origin of mineral coatings on volcanic rocks of the Black Mountain, Stonewall Mountain, and Kane Springs, Wash volcanic centers, Southern Nevada

LANDSAT Thematic Mapper imagery was evaluated over 3 Tertiary calderas in southern Nevada. Each volcanic center derived from a highly evolved silici magmatic system represented today by well exposed diverse lithologies. Distinctive imagery contrast between some of the late ash flows and earlier units follows from the high relative reflectance in longer wavelength bands (bands 5 and 7) of the former. Enhancement techniques provide color composite images which highlight some of the units in remarkable color contrast. Inasmuch as coatings on the tuffs are incompletely developed and apparently largely dependent spectrally on rock properties independent of petrochemistry, it is felt that the distinctive imagery characteristics are more a function of primary lithologic or petrochemical properties. Any given outcrop is backdrop for a variety of cover types, of which coatings, at various stages of maturity, are one. Petrographic and X-ray diffraction analysis of the outer air-interface zone of coatings reveal they are composed chiefly of amorphous compounds, probably with varying proportions of iron and manganese. Observations support an origin for some outer (air-interface) coating constituents exogenous to the underlying host.

Taranik, James V.↗
DOE OSTI2021

Unusual Seismic Signals in the Sevier Desert, Utah Possibly Related to the Black Rock Volcanic Field

Abstract On September 12, 2018 and April 14, 2019 shallow (<2.5 km from the surface, <1 km relative to sea level) earthquakes ( M w 4.0 and 4.1, respectively) struck a relatively aseismic area in south‐central Utah, within the Black Rock Desert volcanic field. Seismic waveforms are dominated by long‐period energy, no clear direct S‐wave arrivals, and signal durations of ∼100 s. Using co‐seismic interferograms, we detect clear and distinguishable surface deformation confirming the shallowness of the two mainshocks, while full moment tensor solutions rule out an isotropic source, such as an explosion or collapse. For the April 2019 sequence, we build an earthquake catalog using a dense temporary geophone array. The enhanced earthquake catalog shows a rapidly decaying aftershock sequence, with 85% of aftershocks occurring during the first three hours. Combining these observations, we argue that these earthquake sequences are related to the Black Rock Desert volcanic field.

Mesimeri, Maria↗
NASA NTRS1983

Geochemistry of volcanic rocks from the Wawa greenstone belt

The Wawa greenstone belt is located in the District of Algoma and extends east-northeast from Lake Superior to the western part of the Sudbury District in Ontario, Canada. Recent mapping by Attoh has shown that an unconformity at the base of the Dore' Formation and equivalent sedimentary rocks marks a significant stratigraphic break which can be traced throughout the volcanic belt. This break has been used to subdivide the volcanic-sedimentary into pre- and post-Dore' sequences. The pre-Dore' sequence includes at least two cycles of mafic-to-felsic volcanism, each capped by an iron-formation unit. The post-Dore' sequence includes an older mafic-to-felsic unit, which directly overlies sedimentary rocks correlated with the Dore' Formation, and a younger felsic breccia unit interpreted to have formed as debris flows from a felsic volcanic center. In the present study, samples of both the pre-and post-Dore' volcanic sequences were analyzed for major and trace elements, incuding rare earths (REE). This preliminary study is part of an ongoing program to assess the petrogenesis of the volcanic rocks of the Wawa greenstone belt.

Schulz, K. J.↗
NASA NTRS2017

Constraining the Origin of Basaltic Volcanic Rocks Observed by Opportunity Along the Rim of Endeavour Crater

The Mars Exploration Rover (MER) Opportunity continues its exploration along the rim of Endeavour Crater. While the primary focus for investigation has been to seek evidence of aqueous alteration, Opportunity has observed a variety of rock types, including some that are hard and relatively unaltered. These rocks tend to occur most commonly as "float rocks" or "erratics" where the geologic setting does not clearly reveal their origin. Along the rim of Endeavour crater (Fig. 1), such rocks, commonly noted in Panoramic Camera (Pancam) left eye composites as "blue rocks", are abundant components of some of the Endeavour crater rim deposits, scree slopes, and colluvium deposits. In this abstract, we examine the similarity of several of these rocks analyzed using Opportunity's Alpha Particle X-Ray Spectrometer (APXS), images and color from the Pancam, and textures observed with the Microscopic Imager (MI. At issue is the blue rocks origin; are they impact melt or volcanic, what is their age relative to Endeavour crater, and how they are related to each other?

Bouchard, M. C.↗
NASA NTRS1981

Ar-40-Ar-39 and Rb-Sr age determinations on Quaternary volcanic rocks

Ages of leucite and biotite separates from samples of the potassic volcanics of the Roman Comagmatic region are derived by the stepwise degassing variant of the Ar-39-Ar-40 dating method and compared with those derived from Rb-Sr dating in order to evaluate the abilities of the methods to date Quaternary geological events. Six of the leucite separates are found to contain Ar with very high bulk 40/36 ratios and to have well correlated Ar-40 and Ar-39 contents, yielding ages of approximately 338,000 years. Two leucites observed to contain Ar with lower bulk 40/36 ratios and Ar-40/Ar-36 ratios significantly lower than atmospheric are found to have ages in substantial agreement with those of the other leucites despite the uncertainty in the composition of the trapped component. Ages obtained for the biotites are not as precise as those of the leucites, due to difficulties in obtaining a good separation of in situ radiogenic Ar-40 from trapped Ar-40. Ages determined from Rb-Sr measurements for selected tuff samples are found to be in good agreement with the Ar-40-Ar-39 ages of the leucites. Results demonstrate the possibility of attaining precisions of better than 5% in the dating of rocks 350,000 years old by both the Ar-40-Ar-39 and the Rb-Sr methods.

Radicati Di Brozolo, F.↗
NASA NTRS1985

A First Look at Airborne Imaging Spectrometer (AIS) Data in an Area of Altered Volcanic Rocks and Carbonate Formations, Hot Creek Range, South Central Nevada

Three flight lines of Airborne Imaging Spectrometer (AIS) data were collected in 128 bands between 1.2 and 2.4 microns in the Hot Creek Range, Nevada on July 25, 1984. The flight lines are underlain by hydrothermally altered and unaltered Paleozoic carbonates and Tertiary rhyolitic to latitic volcanics in the Tybo mining district. The original project objectives were to discriminate carbonate rocks from other rock types, to distinguish limestone from dolomite, and to discriminate carbonate units from each other using AIS imagery. Because of high cloud cover over the prime carbonate flight line and because of the acquisition of another flight line in altered and unaltered volcanics, the study has been extended to the discrimination of alteration products. In an area of altered and unaltered rhyolites and latites in Red Rock Canyon, altered and unaltered rock could be discriminated from each other using spectral features in the 1.16 to 2.34 micron range. The altered spectral signatures resembled montmorillonite and kaolinite. Field samples were gathered and the presence of montmorillonite was confirmed by X-ray analysis.

Feldman, S. C.↗
DOE OSTI2021

Heterogeneous multiphase flow properties of volcanic rocks and implications for noble gas transport from underground nuclear explosions

Of interest to the Underground Nuclear Explosion Signatures Experiment are patterns and timing of explosion-generated noble gases that reach the land surface. The impact of potentially simultaneous flow of water and gas on noble gas transport in heterogeneous fractured rock is a current scientific knowledge gap. This article presents field and laboratory data to constrain and justify a triple continua conceptual model with multimodal multiphase fluid flow constitutive equations that represents host rock matrix, natural fractures, and induced fractures from past underground nuclear explosions (UNEs) at Aqueduct and Pahute Mesas, Nevada National Security Site, Nevada, USA. Capillary pressure from mercury intrusion and direct air–water measurements on volcanic tuff core samples exhibit extreme spatial heterogeneity (i.e., variation over multiple orders of magnitude). Petrographic observations indicate that heterogeneity derives from multimodal pore structures in ash-flow tuff components and post-depositional alteration processes. Comparisons of pre- and post-UNE samples reveal different pore size distributions that are due in part to microfractures. Capillary pressure relationships require a multimodal van Genuchten (VG) constitutive model to best fit the data. Relative permeability estimations based on unimodal VG fits to capillary pressure can be different from those based on bimodal VG fits, implying the choice of unimodal vs. bimodal fits may greatly affect flow and transport predictions of noble gas signatures. The range in measured capillary pressure and predicted relative permeability curves for a given lithology and between lithologies highlights the need for future modeling to consider spatially distributed properties.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2022

Geochronology of Cambrian Sedimentary and Volcanic Rocks in the Illinois Basin: Defining the Illinois Aulacogen

The Wabash #1 well, drilled for the Wabash CarbonSAFE Project and located in Vigo County, Indiana, USA, was drilled in early 2020 as a stratigraphic test well to characterize and evaluate the basal Cambrian Mt. Simon Sandstone for carbon dioxide storage (TD=8750 ft; 2667 m). The Wabash #1 well is located along the eastern flank of a newly interpreted Cambrian aulacogen that occurs in western Indiana and eastern Illinois. Here we present 938 new detrital zircon U-Pb ages (LA-ICPMS) from early Cambrian sandstones sampled near the base of the well. A basalt lava flow was penetrated at ~8530 ft (2600 m) and has an 40 Ar/ 39 Ar age of 525.03 +/- 1.10 Ma, which represents the first known Cambrian crust in the Illinois Basin. The two sandstone samples from beneath the basalt are dominated by zircons derived from the Midcontinent Granite-Rhyolite terrane. The sandstone samples from above the basalt reflect a mixture of these locally derived Mazatzal and Granite-Rhyolite terrane zircons, but also distal Archean, Grenville, and Yavapai zircons. Each sample has small numbers of Cambrian zircons, which is consistent with those in basal Cambrian sandstones in other deep wells to the west. These early Cambrian detrital zircons and early Cambrian age of the basalt, combined with sediment thickness patterns permit the interpretation of the Illinois aulacogen, which formed during the final stage of Rodinian rifting.

58 GEOSCIENCES↗
NASA NTRS1977

Results of analyses performed on basalt adjacent to penetrators emplaced into volcanic rock at Amboy, California, April 1976

The physical and chemical modifications found in the basalt after impact of four penetrators were studied. Laboratory analyses show that mineralogical and elemental changes are produced in the powdered and crushed basalt immediately surrounding the penetrator. Optical microscopy studies of material next to the skin of the penetrator revealed a layer, 0-2 mm thick, of glass and abraded iron alloy mixed with fractured mineral grains of basalt. Elemental analysis of the 0-2 mm layer revealed increased concentrations of Fe, Cr, Ni, No, and Mn, and reduced concentrations of Mg, Al, Si, and Ca. The Fe, Cr, Ni, and Mo were in fragments abraded from the penetrator. Mineralogical changes occurring in the basalt sediment next to the penetrator include the introduction of micron-size grains of alpha-iron, magnetite, and hematite. The newly formed silicate minerals include metastable phases of silica (tridymite and cristobalite). An increased concentration of Fe, Cr, Ni, and Mo occurred in the 2-mm to 1-cm layer of penetrator no. 1, which impacted at the highest velocity. No elemental concentration increase was noted for penetrators nos. 2 and 3 in the 2-mm to 1-cm layer. Contaminants introduced by the penetrator occur up to 1 cm away from the penetrator's skin. Although volatile elements do migrate and new minerals are formed during the destruction of host minerals in the crushed rock, no changes were observed beyond the 1-cm distance.

Blanchard, M.↗
NASA NTRS1979

Field measurement of penetrator seismic coupling in sediments and volcanic rocks

Field experiments were conducted to determine experimentally how well a seismometer installed using a penetrator would be coupled to the ground. A dry lake bed and a lava bed were chosen as test sites to represent geological environments of two widely different material properties. At each site, two half-scale penetrators were fired into the ground, a three-component geophone assembly was mounted to the aft end of each penetrator, and dummy penetrators were fired at various distances to generate seismic signals. The recorded signals were digitized, and cross-spectral analyses were performed to compare the observed signals in terms of power spectral density ratio, coherence and phase difference. The analyses indicate that seismometers deployed by penetrators will be as well coupled to the ground as are seismometers installed by conventional methods for the frequency range of interest in earthquake seismology, although some minor differences were observed at frequencies near the upper limit of the frequency band.

Nakamura, Y.↗
NASA NTRS1979

Field Measurements of Penetrator Seismic Coupling in Sediments and Volcanic Rocks

Field experiments were conducted to determine how well a seismometer installed using a penetrator would be coupled to the ground. A dry-lake bed and a lava bed were chosen as test sites to represent geological environments of two widely different material properties. At each site, two half-scale penetrators were fired into the ground, a three-component geophone assembly was mounted to the aft end of each penetrator, and dummy penetrators were at various distances to generate seismic signals. These signals were detected by the penetrator-mounted geophone assembly and by a reference geophone assembly buried or anchored to surface rock and 1-m from the penetrator. The recorded signals were digitized, and cross-spectral analyses were performed to compare the observed signals in terms of power spectral density ratio, coherence, and phase difference. The analyses indicate that seismometers deployed by penetrators will be as well coupled to the ground as are seismometers installed by conventional methods for the frequency range of interest in earthquake seismology.

Nakamura, Y.↗
NASA NTRS1986

Detection and mapping of volcanic rock assemblages and associated hydrothermal alteration with Thermal Infrared Multiband Scanner (TIMS) data Comstock Lode Mining District, Virginia City, Nevada

Thermal Infrared Multispectral Scanner (TIMS) data were acquired over the Virginia City area on September 12, 1984. The data were acquired at approximately 1130 hours local time (1723 IRIG). The TIMS data were analyzed using both photointerpretation and digital processing techniques. Karhuen-Loeve transformations were utilized to display variations in radiant spectral emittance. The TIMS image data were compared with color infrared metric camera photography, LANDSAT Thematic Mapper (TM) data, and key areas were photographed in the field.

Taranik, James V.↗