Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vertical temperature profile”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Remote sensing of atmospheric temperature profiles with the Nimbus 5 microwave spectrometer

The paper discusses the accuracy of atmospheric vertical temperature profile measurements performed by the Nimbus 5 microwave spectrometer and compares results obtained during the first 6 months of its operation with independent ground-truth measurements (coincident radiosonde measurements). The microwave spectrometer can measure temperature profiles averaged over the instrument weighting function (about 10 km) layers with a root-mean-square accuracy of a few tenths of a degree K for measurement integration times of 16 s. Lower tropospheric temperature data from the spectrometer measurements is used in the numerical weather prediction model of the National Meteorological Center.

Waters, J. W.↗
NASA NTRS1976

Atmospheric temperature profiles derived through the inversion of a system of first order differential equations

Generation of vertical temperatures profiles from remotely sensed atmospheric radiance data is described as an analogous communications system. The radiative transport characteristics of the atmosphere encodes the continuous temperature profile into an 'n' element vector where 'n' is the number of channels in the satellite instrument. The temperature profile is a message transmitted from station A to station B and the link is the satellite instrument. At station B the decoder reproduces a continuous function which is the best estimate of the message encoded at station A. It is shown that the decoder must operate in a tuned mode where the parameters used in the encoder precisely determine the decoder parameters, and that the characteristics of the total message block must be given by a set of decoder constraints

Gatlin, J. A.↗
NASA NTRS2023

User Guide for TROPICS Data Products

This document provides information for using the data products available from the “Time-Resolved Observations of Precipitation structure and storm Intensity with a Constellation of Smallsats” (TROPICS) mission. The TROPICS mission will produce a range of data products that will be available at the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC). The data products will be produced at the TROPICS Data Processing Center (UW-M SSEC), and consist of Level-1 radiances (antenna and brightness temperatures), Level-2a unified resolution radiance, Level-2b Atmospheric Vertical Temperature Profiles (AVTP), Level-2b Atmospheric Vertical Moisture Profiles (AVMP), Level-2b Instantaneous Surface Rain Rate (ISRR), and Level-2b Tropical Cyclone (TC) intensity algorithms to estimate two primary variables: Minimum Sea Level Pressure (MSLP) and Maximum Sustained Winds (MSW). Two independent intensity estimation methods are included: 1) the Tropical Cyclone Intensity Estimate algorithm (TCIE) developed at the University of Wisconsin/CIMSS using native microwave brightness temperatures and 2) the Hurricane Intensity and Structure Algorithm (HISA) developed at Colorado State University/CIRA using microwave retrievals of temperature, moisture, and integrated quantities. In addition to MSW and MSLP, HISA also provides estimates of surface wind radii and 2D winds at standard pressure levels. TROPICS is adapting the NOAA STAR Microwave Integrated Retrieval System (MIRS) to retrieve the AVTP and AVMP data products. The ISRR algorithm uses the NASA Goddard Precipitation Retrieval and Profiling Scheme (PRPS).

TROPICS↗
NASA NTRS2002

Sensitivities of Modeled Tropical Cyclones to Surface Friction and the Coriolis Parameter

In this investigation the sensitivities of a 2-D tropical cyclone (TC) model to surface frictional coefficient and the Coriolis parameter are studied and their implication is discussed. The model used is an axisymmetric version of the latest version of the Goddard cloud ensemble model. The model has stretched vertical grids with 33 levels varying from 30 m near the bottom to 1140 m near the top. The vertical domain is about 21 km. The horizontal domain covers a radius of 962 km (770 grids) with a grid size of 1.25 km. The time step is 10 seconds. An open lateral boundary condition is used. The sea surface temperature is specified at 29C. Unless specified otherwise, the Coriolis parameter is set at its value at 15 deg N. The Newtonian cooling is used with a time scale of 12 hours. The reference vertical temperature profile used in the Newtonian cooling is that of Jordan. The Newtonian cooling models not only the effect of radiative processes but also the effect of processes with scale larger than that of TC. Our experiments showed that if the Newtonian cooling is replaced by a radiation package, the simulated TC is much weaker. The initial condition has a temperature uniform in the radial direction and its vertical profile is that of Jordan. The initial winds are a weak Rankin vortex in the tangential winds superimposed on a resting atmosphere. The initial sea level pressure is set at 1015 hPa everywhere. Since there is no surface pressure perturbation, the initial condition is not in gradient balance. This initial condition is enough to lead to cyclogenesis, but the initial stage (say, the first 24 hrs) is not considered to resemble anything observed. The control experiment reaches quasi-equilibration after about 10 days with an eye wall extending from 15 to 25 km radius, reasonable comparing with the observations. The maximum surface wind of more than 70 m/s is located at about 18 km radius. The minimum sea level pressure on day 10 is about 886 hPa. Thus the overall simulation is considered successful and the model is considered adequate for our investigation.

Chao, Winston C.↗
NASA NTRS1981

Remote sensing of temperature profiles in vegetation canopies using multiple view angles and inversion techniques

A mathematical method is presented which allows the determination of vertical temperature profiles of vegetation canopies from multiple sensor view angles and some knowledge of the vegetation geometric structure. The technique was evaluated with data from several wheat canopies at different stages of development, and shown to be most useful in the separation of vegetation and substrate temperatures with greater accuracy in the case of intermediate and dense vegetation canopies than in sparse ones. The converse is true for substrate temperatures. Root-mean-square prediction accuracies of temperatures for intermediate-density wheat canopies were 1.8 C and 1.4 C for an exact and an overdeterminate system, respectively. The findings have implication for remote sensing research in agriculture, geology or other earth resources disciplines.

Kimes, D. S.↗
NASA NTRS1984

Spectroscopy and transmittances for the LIMS experiment

The Limb Infrared Monitor of the Stratosphere (LIMS) instrument on the Nimbus 7 spacecraft sensed limb emission profiles for 7 months, starting in October 1979. Vertical temperature profiles are inferred from measurements in two CO2 channels, and constituent profiles are obtained form the O3, HNO3, NO2, and water vapor channels. The line parameters used to calculate transmittances in the retrieval algorithm are presented. Their adequacy for LIMS and for other applications are assessed, and recommendations for future investigations are outlined.

Drayson, S. R.↗
NASA NTRS1986

The ill-posed nature of the satellite temperature retrieval problem and the limits of retrievability

The inverse problem of satellite temperature profile retrieval is well known to be ill-posed. This means that not only is a vertical temperature profile solution not unique, but that two solutions can be very different from each other. A set of atmosphere-like, and true atmospheric examples of significantly dissimilar inverse solutions, were sought and found, using an 11-channel simulated HIRS sounding radiometer. Using the Riemann-Lebesgue Lemma for guidance, it is shown that simultaneous, numerical solutions of an atmospheric character may differ by as much as 10 K between 10-1000 mb. However, an empirical search for dissimilar solutions in the natural atmosphere reveals an extremely low probability of finding two significantly different RAOBs which produce radiance measurements whose differences cannot be resolved by the satellite radiometer. The empirical results are used to derive a first estimate of the limits of retrievability, analogous to the limits of predictability derivable from the ill-posed nature of the numerical weather prediction problem.

Thompson, Owen E.↗
NASA NTRS1994

(abstract) Tropospheric Calibration for the Mars Observer Gravity Wave Experiment

In spring 1993, microwave radiometer-based tropospheric calibration was provided for the Mars Observer gravitational wave search. The Doppler shifted X-band radio signals propagating between Earth and the Mars Observer satellite were precisely measured to determine path length variations that might signal passage of gravitational waves. Experimental sensitivity was restricted by competing sources of variability in signal transit time. Principally, fluctuations in the solar wind and ionospheric plasma density combined with fluctions in tropospheric refractivity determined the detection limit. Troposphere-induced path delay fluctions are dominated by refractive changes caused by water vapor inhomogeneities blowing through the signal path. Since passive microwave remote sensing techniques are able to determine atmospheric propagation delays, radiometer-based tropospheric calibration was provided at the Deep Space Network Uranus tracking site (DSS-15). Two microwave water vapor radiometers (WVRs), a microwave temperature profiler (MTP), and a ground based meterological station were deployed to determine line-of-sight vapor content and vertical temperature profile concurrently with Mars Observer tracking measurements. This calibration system provided the capability to correct Mars Observer Doppler data for troposphere-induced path variations. We present preliminary analysis of the Doppler and WVR data sets illustrating the utility of WVRs to calibrate Doppler data. This takes an important step toward realizing the ambitious system required to support future Ka-band Cassini satellite gravity wave tropospheric calibration system.

atmospheric water vapor microwave remote sensing↗
NASA NTRS1983

Stratospheric temperature profile from balloon-borne measurements of the 10.4-micron band of CO2

The technique of nonlinear least squares spectral curve fitting has been used to derive the stratospheric vertical temperature profile from balloon-borne measurements of the 10.4 micron band of CO2. The spectral data were obtained at sunset with the approximately 0.02 per cm resolution University of Denver interferometer system from a float altitude of 33.5 km near Alamogordo, New Mexico, on 23 March 1981. The r.m.s. deviation between the retrieved temperature profile and correlative radiosonde measurements is 2.2 K.

Rinsland, C. P.↗
NASA NTRS1974

Remote temperature sounding in the presence of cloud by zenith scanning

The principles of remote sounding of vertical temperature profiles in planetary atmospheres containing cloud layers are presented for an approach that uses measurements at different angles to the local vertical to eliminate the unknown cloud effects. A numerical example for a model of the earth's atmosphere shows that soundings separated by 40 deg in zenith angle permit the recovery of the temperature profile with an error that is not significantly greater than that obtained in the clear atmosphere case, and without serious horizontal smear. It is proposed that the method will be valuable for the interpretation of measurements made by instruments on spin-stabilized spacecraft on planetary missions, since in these cases the required angular coverage is obtained automatically for most trajectories.

Taylor, F. W.↗
NASA NTRS2023

TROPICS -Atmospheric Vertical Temperature and Moisture Profiles: Algorithm Theoretical Basis Document

This Algorithm Theoretical Basis Document (ATBD) describes the theoretical background of the TROPICS Atmospheric Vertical Temperature and Moisture Profile (AVTP/AVMP) retrieval algorithms. It also includes TROPICS payload characteristics and the algorithm’s ancillary data (i.e., data coming from sources other than the TROPICS Space Vehicle). Details of the AVTP and AVMP, data product format can be found in the TROPICS Data User’s Guide. This ATBD will also contain the pre-launch testing completed to verify the algorithm. The TROPICS Data User’s Guide will contain the post-launch validation.

TROPICS↗
NASA NTRS1976

Mesoscale temperature and moisture fields from satellite infrared soundings

The combined use of radiosonde and satellite infrared soundings can provide mesoscale temperature and moisture fields at the time of satellite coverage. Radiance data from the vertical temperature profile radiometer on NOAA polar-orbiting satellites can be used along with a radiosonde sounding as an initial guess in an iterative retrieval algorithm. The mesoscale temperature and moisture fields at local 9 - 10 a.m., which are produced by retrieving temperature profiles at each scan spot for the BTPR (every 70 km), can be used for analysis or as a forecasting tool for subsequent weather events during the day. The advantage of better horizontal resolution of satellite soundings can be coupled with the radiosonde temperature and moisture profile both as a best initial guess profile and as a means of eliminating problems due to the limited vertical resolution of satellite soundings.

Hillger, D. W.↗
NASA NTRS2008

Estimating Mixing Heights Using Microwave Temperature Profiler

A paper describes the Microwave Temperature Profiler (MTP) for making measurements of the planetary boundary layer thermal structure data necessary for air quality forecasting as the Mixing Layer (ML) height determines the volume in which daytime pollution is primarily concentrated. This is the first time that an airborne temperature profiler has been used to measure the mixing layer height. Normally, this is done using a radar wind profiler, which is both noisy and large. The MTP was deployed during the Texas 2000 Air Quality Study (TexAQS-2000). An objective technique was developed and tested for estimating the ML height from the MTP vertical temperature profiles. In order to calibrate the technique and evaluate the usefulness of this approach, estimates from a variety of measurements during the TexAQS-2000 were compared. Estimates of ML height were used from radiosondes, radar wind profilers, an aerosol backscatter lidar, and in-situ aircraft measurements in addition to those from the MTP.

Nielson-Gammon, John↗
NASA NTRS1981

The validation of LIMS ozone profiles using correlative rocket, ECC, and Dobson data sets

The Limb Infrared Monitor of the Stratosphere (LIMS) experiment is a limb scanning infrared sounder designed to measure vertical temperature profiles and the concentrations of key chemical compounds which are important in the stratospheric ozone-nitrogen photochemistry. Preliminary ozone profiles are being intercompared with correlative rocket and balloonsonde ozone data sets as part of the Nimbus 7 LIMS data validation activity. The LIMS ozone retrievals extend from the lower mesosphere to the tropopause (or cloud-top altitudes). In this paper, preliminary statistics of comparisons of ECC (electrochemical concentration cell) ozonesonde and rocket ozone profiles with LIMS ozone profiles are presented. ECC ozonesonde data taken at times of LIMS overpasses are also used to extend the LIMS retrieval down to ground level. Each combined profile is then integrated to obtain total column ozone. These integrated results are compared to Dobson data obtained at approximately the same time and location.

Remsberg, E. E.↗
NASA NTRS1987

The 1 May 1982 stellar occultation by Uranus and the rings Observations from Mount Stromlo Observatory

The Klemola et al. (1981) object KME 15 has been observed by the Mount Stromlo 1.9-m telescope during its occultation by the Uranian rings on May 1, 1982. In addition to deriving accurate midtimes for rings 6, 5, 4, alpha, beta, eta, gamma, delta, and epsilon, on the basis of model fits to the immersion and emersion ring profiles, normal optical depths and equivalent widths are obtained for all save ring 6. The numerical inversion of immersion and emersion atmosphere occultation values has yielded vertical temperature profiles that exhibit mean temperatures in the vicinity of 130 K and a local maximum near the 8-microbar pressure level.

French, Richard G.↗