Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “velocity model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Using Dense Array Waveform Correlations to Build a Velocity Model with Stochastic Variability

In an ongoing effort to improve 3D seismic-wave propagation modeling for frequencies up to 10 Hz, we used cross correlations between vertical-component waveforms from an underground chemical explosion to estimate the statistical properties of small-scale velocity heterogeneities. The waveforms were recorded by a dense 2D seismic array deployed during the Source Physics Experiments for event number 5 (SPE-5) in a series of six underground chemical explosions, conducted at the Nevada National Security Site. The array consisted of 996 geophones with a 50–100 m grid spacing, deployed at the SPE site at the north end of the Yucca Flat basin. The SPE were conducted to investigate the generation and propagation of seismic and acoustic waves from underground explosions. Comparisons of decay rates of waveform cross correlations as function of interstation distance, computed for observed and synthetic seismograms from the SPE-5 chemical explosion, were used to constrain statistical properties of correlated stochastic velocity perturbations representing small-scale heterogeneities added to a geology-based velocity model of the Yucca Flat basin. Using comparisons between recorded and simulated waveform cross correlations, we were able to recover sets of statistical properties of small-scale velocity perturbations in the velocity model that produce the best-fit between the recorded and simulated ground motion. The stochastic velocity fluctuations in the velocity model that produced the smallest misfits have a horizontal correlation distance of between 400 and 800 m, a vertical correlation distance between 100 and 200 m, and a standard deviation of 10% from the nominal model velocity in the alluvium basin layers. They also have a horizontal correlation distance of 1000 m, a vertical correlation distance of 250 m, and a standard deviation of 6% in the underlying and consolidated sedimentary layers, up to a depth of 4 km. Comparisons between observed and simulated wavefields were used to assess the proposed small-scale heterogeneity enhancements to the Yucca Flat basin model. We found that adding a depth-resolved stochastic variability to the geology-based velocity model improves the overall performance of ground-motion simulations of an SPE-5 explosion in the modeled frequency range up to 10 Hz. The results may be applicable to other similar basins.

58 GEOSCIENCES↗

Utah FORGE - Development of a Reservoir Seismic Velocity Model and Seismic Resolution Study

This is data from and a final report on the development of a 3D velocity model for the larger FORGE area and on the seismic resolution in the stimulated fracture volume at the bottom of well 16A-32. The velocity model was developed using RMS velocities of the seismic reflection survey and seismic velocity logs from borehole measurements as an input model. To improve the accuracy of the model in the shallow subsurface, travel times phase arrivals of the direct propagating P-waves were determined from the seismic reflection data, using PhaseNet, a deep-neural-network-based seismic arrival time picking method. The travel times were subsequently inverted using the input velocity model. The seismic resolution study used borehole and surface seismic sensors as well as the seismicity observed during the April 2022 stimulation experiment to estimate the seismic resolution in the activated fracture reservoir. The data contain a 3D P- and S-wave velocity model for the larger FORGE area.

15 GEOTHERMAL ENERGY↗

Bayesian inference for the seismic moment tensor using regional waveforms and a data-derived distribution of velocity models

The largest source of uncertainty in any source inversion is the velocity model used to construct the transfer function employed in the forward model that relates observed ground motion to the seismic moment tensor. However, standard inverse procedures often does not quantify uncertainty in the seismic moment tensor due to error in the Green’s functions from uncertain event location and Earth structure. We attempt to incorporate this uncertainty into an estimation of the seismic moment tensor using a distribution of velocity models calculated in a prior effort based on different and complementary data sets. The posterior distribution of velocity models is then used to construct Green’s functions for use in Bayesian inference of an unknown seismic moment tensor using regional waveform data. The combined likelihood is estimated using data-specific error models and the posterior of the seismic moment tensor is estimated and can be interpreted in terms of most-probable source-type.

58 GEOSCIENCES↗

Bayesian Inference for the Seismic Moment Tensor Using Regional Waveforms and Teleseismic- P Polarities with a Data-Derived Distribution of Velocity Models and Source Locations

The largest source of uncertainty in any source inversion is the velocity model used in the transfer function that relates observed ground motion to the seismic moment tensor. However, standard inverse procedure often does not quantify uncertainty in the seismic moment tensor due to error in the Green’s functions from uncertain event location and Earth structure. Here, we incorporate this uncertainty into an estimation of the seismic moment tensor using a data-derived distribution of velocity models based on complementary geophysical data sets, including thickness constraints, velocity profiles, gravity data, surface-wave group velocities, and regional body-wave travel times. The data-derived distribution of velocity models is then used as a prior distribution of Green’s functions for use in Bayesian inference of an unknown seismic moment tensor using regional and teleseismic-P waveforms. The use of multiple data sets is important for gaining resolution to different components of the moment tensor. The combined likelihood is estimated using data-specific error models and the posterior of the seismic moment tensor is estimated and interpreted in terms of the most probable source type.

58 GEOSCIENCES↗

20 Year Daily Average Modeled Velocity and Discharge for Openwater Season at Five Communities on Kuskokwim River, Alaska

This dataset includes modeled velocity and discharge at five communities in the middle Kuskokwim River region: Aniak, Chuathbaluk, Crooked Creek, Red Devil and Stony River. Modeled velocities and discharge represent daily averages calculated for the openwater season (OWS) from June 1 - October 18 over the 20 year period 2000-2019 using the raw data described below and included in this archive; full details of methodology are described in (Brown et al. submitted to Renewable Energy). Raw data inputs to inform the modeling process include in-situ measurements of 1) discharge with an acoustic Doppler current meter (ADCP, 600kHz Workhorse Rio Grande by Teledyne RD Instruments) and a global positioning receiver (GPS, Trimble 5700, 5800 and R8) utilizing Real Time Kinematic (RTK) GPS mode over 1-2 days at each site in 2009 or 2010 (Ravens 2014), and 2) river stage with a water level logger (HOBO U20-001-01 by Onset) over 2-9 weeks at each site (Ravens 2014), 3) in addition to a 20 year long-term discharge record collected at the USGS stream gage site in Crooked Creek (USGS 2016). Raw data (discharge and stage) are included in this archive for two additional communities: Lower Kalskag and Sleetmute, where modeled velocities were not calculated due to equipment failure or loss. The USGS stream gage data at Crooked Creek (USGS 2016) and stream gage methodology (Turnipseed and Sauer 2010) are publicly available online, so the data are not duplicated here.

16 TIDAL AND WAVE POWER↗

Brady 1D seismic velocity model ambient noise prelim

Preliminary 1D seismic velocity model derived from ambient noise correlation. 28 Green's functions filtered between 4-10 Hz for Vp, Vs, and Qs were calculated. 1D model estimated for each path. The final model is a median of the individual models. Resolution is best for the top 1 km. Poorly constrained with increasing depth.

15 GEOTHERMAL ENERGY↗

The Feasibility of Incorporating a 3D Velocity Model Into Earthquake Location Around Salt Lake City, UT Using a Physics Informed Neural Network

Earthquake location algorithms typically require travel time calculation. Doing this calculation in 3D, despite advances in algorithm efficiency and computational power, can still be prohibitively expensive in terms of resources and storage. Implementation of high-resolution 3D models in routine earthquake location would be a significant step forward in most of the world. Machine learning algorithms have potential to act as substitutes for travel time calculation algorithms or stored travel time tables. We investigate EikoNet - a physics informed neural network machine learning model that estimates travel times very quickly and comes with negligible memory-overhead. Specifically, we apply EikoNet to the Wasatch Fault Community Velocity Model (WFCVM), a highly detailed and complex 3D velocity model of the Salt Lake City, UT region. While routine locations in the area and studies of the 2020 Magna, UT earthquake sequence used a 1D velocity model, a 3D model may help better our understanding the structure of the major fault in the region. Our primary goal was to test the speed, memory requirements, and accuracy of EikoNet compared to a reference eikonal solver. We find that while the EikoNet is exceedingly fast and requires little memory overhead, achieving acceptable accuracy in estimated travel times is difficult and requires extensive computational resources.

58 GEOSCIENCES↗

Fuselage-Induced Velocity Model for LRTA, RTA, and HART Fuselages

In order to make the aerodynamic fuselage-rotor interference effects available to comprehensive rotor codes, a simple analytical model of the fuselage-induced velocities within the volume of rotor blade operation above the fuselage is developed here for the following bodies used in wind tunnel experiments: the Large Rotor Test Apparatus (LRTA), the Rotor Test Apparatus (RTA), and the Higher Harmonic Control Aeroacoustic Rotor Test (HART).While the first two are used in the National Full-Scale Aerodynamics Complex (NFAC) at NASA Ames, California, the third one is used by DLR in the large low-speed facility of the German-Dutch wind tunnel in the Netherlands. The fuselage-induced velocity model is based on parameter identification of isolated fuselage-induced velocity data (computed by means of computational fluid dynamics, CFD) and is intended to be generic enough to be used for real helicopter fuselages as well. The accuracies obtained in reproducing the CFD data show a remaining average error of less or equal 5 of the peak-to-peak induced velocity range, which is considered sufficient for comprehensive code analysis.

HART↗

Evaluating and Improving the USGS 3D Seismic Velocity Model in the San Francisco East Bay by Integrating Earthquake Ground-Motion Simulations and Noise-Derived Empirical Green's Functions

Simulations of scenario earthquake ground motions play an increasingly important role in improving seismic hazard assessment. In the San Francisco Bay Area (SFBA) the USGS has developed a 3D geologic/seismic model. Simulations of large magnitude (M) 7 Hayward Fault scenario earthquakes show dramatic differences in peak ground motions across the fault, arising from wavespeed differences, which highlights the need to evaluate the model. Our comparison of observed and simulated waveforms from M 4 SFBA earthquakes reveals bias in the travel times of direct S-waves for paths crossing the East Bay Hills, east of Hayward Fault, suggests that the shear wavespeeds in the upper crust of the USGS 3D model are too low, resulting in large delay times of S-wave arrivals at the East Bay Hills. We also retrieved noise-derived Green's functions (NGFs) and examined the path-specific bias in the USGS 3D model. We systematically compared synthetic waveforms with the 3D velocity model and observed NGFs. Our result shows that the time lags between the synthetic and observed data ranging from 2-5 seconds for the ray paths propagating the East Bay Hills. This result also suggests that the SFBA 3D model generates arrivals that are too slow. Additionally, we evaluate the Rayleigh-wave ellipticity to evaluate the subsurface velocity beneath seismic stations. A lateral variation in Rayleigh-wave ellipticity across the Hayward fault is observed, which will contribute to refine the SFBA 3D velocity model.

58 GEOSCIENCES↗

Science Plan for Improving 3-D Seismic Velocity Models in the San Francisco Bay Region, 2019-24

This five-year science plan outlines short-term and long-term goals for improving 3-D seismic velocity models in the greater San Francisco Bay region as well as how to foster a community effort in reaching those goals. The short-term goals focus on improving the current USGS San Francisco Bay region geologic and seismic velocity model using existing data. The long-term goals focus on acquiring new data and leveraging better analysis tools to improve the model and characterize the uncertainty. The plan describes opportunities for contributions by members of the community to development of these seismic velocity models, provides current and potential users with general information on where efforts will likely be focused to improve these models and how new versions will be released, and outlines funding needs and obstacles for improving and maintaining such models. Several aspects of this plan, including how to foster a community effort, are independent of the geographic region and apply to other, similar efforts.

58 GEOSCIENCES↗

Enhancing Regional Seismic Velocity Models With Higher‐Resolution Local Results Using Sparse Dictionary Learning

Abstract We use sparse dictionary learning to develop transformations between seismic velocity models of different resolution and spatial extent. Starting with data in the common region of both models, the method can enhance a regional lower‐resolution model to match the style and resolution of local higher‐resolution results while preserving its regional coverage. The method is demonstrated by applying it to two‐dimensional V S and three‐dimensional V P and V S regional and local velocity models in southern California. The enhanced reconstructed regional results exhibit clear visual improvements, especially in the reconstructed V P / V S ratios, and better correlations with geological features. Moreover, the reconstructed regional V P , V S models outperform the original ones in comparison of simulated earthquake waveforms to observations. The improved fitting to observed waveforms extends beyond the domain of the overlapping region. The developed dictionary learning approach provides physically interpretable results and offers a powerful tool for additional applications of data enhancement in earth sciences.

Geochemistry & Geophysics↗

Hypocenter relocation using a fast grid search method and a 3-D seismic velocity model for the Sumatra region

Determination of earthquake hypocenter in Indonesia conducted by the Meteorological, Climatological, and Geophysical Agency (MCGA) has still used a 1-D seismic velocity model. In this research, we have applied a Fast Grid Search (FGM) method and a 3-D velocity model resulting from tomographic imaging to relocate earthquakes in the Sumatran region. The data were taken from the MCGA data catalog from 2009 to 2011 comprising of subduction zone and on land fault earthquakes with magnitude greater than 4 Mw. Our preliminary results show some significant changes in the depths of the relocated earthquakes which are in general deeper than the depths of hypocenters from the MCGA data catalog. The residual times resulting from the relocation process are smaller than those prior to the relocation. Encouraged by these results, we will continue to conduct hypocenter relocation for all events from the MCGA data catalog periodically in order to produce a new data catalog with good quality. We hope that the new data catalog will be useful for further studies.

58 GEOSCIENCES↗

Using Deep Learning to Derive Shear-Wave Velocity Models from Surface-Wave Dispersion Data

We present a new algorithm for derivations of 1D shear-wave velocity models from surface-wave dispersion data using convolutional neural networks (CNNs). The technique is applied for continental China and the plate boundary region in southern California. Different CNNs are designed for these two regions and are trained using theoretical Rayleigh-wave phase and group velocity images computed from reference 1D VS models. The methodology is tested with 3260 phase–group images for continental China and 4160 phase–group images for southern California. The conversions of these images to velocity profiles take ~23 s for continental China and ~30 s for southern California on a personal laptop with the NVIDIA GeForce GTX 1060 core and a memory of 6 GB. The results obtained by the CNNs show high correlation with previous studies using conventional methods. The effectiveness of the CNN technique makes this fast method an important alternative for deriving shear-wave velocity models from large datasets of surface-wave dispersion data.

Geochemistry & Geophysics↗

A comparison of two types of velocity models for the lunar crust: Smooth continuous and stepwise layered

The data from the Apollo-14 and Apollo-16 Active Seismic Experiments were reanalyzed and show that a power-law velocity variation with depth is consistent with both the traveltimes and amplitudes of the first arrivals for source-to-geophone separations up to 32m. The data were improved by removing spurious glithches, flickering and stacking. While this improved the signal-to-noise ratios, it was not possible to measure the arrivals beyond 32m. The physical evidence that the shallow lunar regolith is made up of fine particles adds weight to the 1/6-power velocity model. The 1/6-power law predicts the traveltime t(x), varies with separation, x, as t(x) = t sub 0 (x/x sub 0) to the 5/6 power and, using a first-order theory, the amplitude, A(x), varies as A(x) = A sub 0 (x/x sub 0) to the (13-m)/12, M 1; the layer-velocity model predicts t(x) = t sub 0 (x/xsub 0) and A(x) = A sub 0 (x/x sub 0) to the 2nd power.

Gangi, A. F.↗

Velocity model of the shallow lunar crust

The travel times of the seismic waves obtained for the Apollo-14 and -16 active seismic experiments and the Apollo-16 grenade launches are shown to be consistent with a powder-layer model of the shallow lunar crust. The velocity variation with depth determined from these data is: V(z) = approximately 110 z to the 1/6 power m/sec for z less than 10 meters and V(z) is nearly = to 250 m/sec for z greater than 10 meters. The velocity values found for the 10 meter depth are similar to those found by Kovach, et al. (1972). The z to the 1/6 power depth dependence for the velocity of the topmost layer is that predicted on the basis of a powder layer (Gangi, 1972). The Amplitude variation of the direct waves as a function of source-to-receiver separation, x, is A(x) = A(o)x to the -n power exp(-ax) where 1.5 n 2.2 and a is nearly = to 0.047 neper/m. Velocity-spectra analyses of the direct, surface-reflected, bottom-reflected and refracted waves give results that are consistent with the velocity model inferred from the traveltime data.

Gangi, A. F.↗

Discrete Velocity Models for Polyatomic Molecules Without Nonphysical Collision Invariants

An important aspect of constructing discrete velocity models (DVMs) for the Boltzmann equation is to obtain the right number of collision invariants. Unlike for the Boltzmann equation, for DVMs there can appear extra collision invariants, so called spurious collision invariants, in plus to the physical ones. A DVM with only physical collision invariants, and hence, without spurious ones, is called normal. The construction of such normal DVMs has been studied a lot in the literature for single species, but also for binary mixtures and recently extensively for multicomponent mixtures. In this paper, we address ways of constructing normal DVMs for polyatomic molecules (here represented by that each molecule has an internal energy, to account for non-translational energies, which can change during collisions), under the assumption that the set of allowed internal energies are finite. We present general algorithms for constructing such models, but we also give concrete examples of such constructions. This approach can also be combined with similar constructions of multicomponent mixtures to obtain multicomponent mixtures with polyatomic molecules, which is also briefly outlined. Then also, chemical reactions can be added.

74 ATOMIC AND MOLECULAR PHYSICS↗

SALSA3D : a global 3D p-velocity model of the Earth's crust and mantle for improved event location.

To test the hypothesis that high quality 3D Earth models will produce seismic event locations which are more accurate and more precise, we are developing a global 3D P wave velocity model of the Earth's crust and mantle using seismic tomography. In this paper, we present the most recent version of our model, SALSA3D version 1.5, and demonstrate its ability to reduce mislocations for a large set of realizations derived from a carefully chosen set of globally-distributed ground truth events. Our model is derived from the latest version of the Ground Truth (GT) catalog of P and Pn travel time picks assembled by Los Alamos National Laboratory. To prevent over-weighting due to ray path redundancy and to reduce the computational burden, we cluster rays to produce representative rays. Reduction in the total number of ray paths is {approx}50%. The model is represented using the triangular tessellation system described by Ballard et al. (2009), which incorporates variable resolution in both the geographic and radial dimensions. For our starting model, we use a simplified two layer crustal model derived from the Crust 2.0 model over a uniform AK135 mantle. Sufficient damping is used to reduce velocity adjustments so that ray path changes between iterations are small. We obtain proper model smoothness by using progressive grid refinement, refining the grid only around areas with significant velocity changes from the starting model. At each grid refinement level except the last one we limit the number of iterations to prevent convergence thereby preserving aspects of broad features resolved at coarser resolutions. Our approach produces a smooth, multi-resolution model with node density appropriate to both ray coverage and the velocity gradients required by the data. This scheme is computationally expensive, so we use a distributed computing framework based on the Java Parallel Processing Framework, providing us with {approx}400 processors. Resolution of our model is assessed using a variation of the standard checkerboard method. We compare the travel-time prediction and location capabilities of SALSA3D to standard 1D models via location tests on a global event set with GT of 5 km or better. These events generally possess hundreds of Pn and P picks from which we generate different realizations of station distributions, yielding a range of azimuthal coverage and ratios of teleseismic to regional arrivals, with which we test the robustness and quality of relocation. The SALSA3D model reduces mislocation over standard 1D ak135 regardless of Pn to P ratio, with the improvement being most pronounced at higher azimuthal gaps.

99 GENERAL AND MISCELLANEOUS↗