Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “validation dataset”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Flood Detection with Synthetic Aperture Radar: A Case Study of Houston, Texas Following Hurricane Harvey (2017) using C- and X-Band Observations

Hurricane Harvey produced record-breaking rainfall of up to 60 inches resulting in extensive flooding in Houston, Texas, in late August and early September of 2017. The slow forward motion of the storm following landfall left much of the area unobservable to optical remote sensing instruments for several days due to cloud cover. The active nature of Synthetic Aperture Radar (SAR) instruments allows for observations through clouds, which can supplement efforts to estimate hurricane-induced flood impacts. A growing fleet of SAR constellations has helped lower the latency of imagery following a hurricane, allowing for more timely detections of flooding to help support emergency response efforts. In this study, we leverage publicly available C-band SAR observations from the European Space Agency’s Sentinel-1B (S1B) satellite, collected on 30 August, and X-band SAR imagery collected on 1 September by the Airbus TanDEM-X (TDX) satellite made available through the NASA Commercial Smallsat Data Acquisition (CSDA) program. For each dataset, one co-polarized, StripMap, Radiometric Terrain Corrected (RTC) image was used to create a binary water/no water classification map by referencing permanent water in the Cropland Data Layer (CDL) dataset to determine thresholds. A validation dataset of randomly distributed “ground truth” points was generated using optical imagery from PlanetScope on 31 August, where the domain had relatively little cloud cover. We found that the S1B- and TDX-derived open water maps achieved overall accuracies of 94.17% and 91.57%, respectively. The variation in performance is attributed to both the penetrative abilities of C- and X-band SAR wavelengths in vegetated areas and the increased spatial resolution of the commercial SAR (~3 m) over Sentinel-1 (30 m). While publicly available Sentinel-1 observations are commonly relied upon in response and recovery efforts, these results suggest that including commercial X-band SAR imagery could be beneficial by providing both increased spatial resolution and more frequent revisits when deriving post-event flood mapping products.

Alexander M Melancon↗
DOE OSTI2022

A hydrological simulation dataset of the Upper Colorado River Basin from 1983 to 2019

Abstract This article presents a hydrological reconstruction of the Upper Colorado River Basin with an hourly temporal resolution, and 1-km spatial resolution from October 1982 to September 2019. The validated dataset includes a suite of hydrologic variables including streamflow, water table depth, snow water equivalent (SWE) and evapotranspiration (ET) simulated by an integrated hydrological model, ParFlow-CLM. The dataset was validated over the period with a combination of point observations and remotely sensed products. These datasets provide a long-term, natural-flow, simulation for one of the most over-allocated basins in the world.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Estimation of Arrivals on Green at Signalized Intersections Using Stop-Bar Video Detection

Across the world, traffic congestion is increasing with alarming rapidity. Traffic signal control effectiveness, in coordinated networks, is often investigated in relation to the type of vehicle arrivals at the signalized intersections. Recently, several transportation agencies have switched from traditional loop detectors to video detection. When video cameras are accompanied by computer vision, one can extract more information about traffic “dynamics” than by using traditional inductive loop detectors. Collecting arrival times of multiple vehicles after the first arrival at the stop-bar detector might be challenging when using inductive loop detectors (since after the first arrival, detector status is always occupied). However, emerging video detection systems allow tracking of each vehicle’s entrance time in the detection zone, departure time from the detection zone, and the type of vehicle. This information can be used to estimate vehicular arrival and departure times, which then can be fed into machine learning algorithms to estimate arrivals on green (AOG). However, such research ideas have not been documented so far. Thus, this paper presents an estimation model for AOG, which was developed using multigene genetic programming. A robust experimental dataset was collected from a highly calibrated and validated microsimulation model of an 11-intersection corridor in Chattanooga, TN. The results of the model’s performance analysis showed the high accuracy of the training-, testing-, and validation datasets. The practical benefit of this model is that it can be applied to estimate arrival types at intersections where only stop-bar video detection exists.

Engineering↗
DOE OSTI2023

RAAW

High-fidelity wind turbine modeling advances necessitate model validation datasets of equally high fidelity. The Rotor Aerodynamics, Aeroelastics & Wake (RAAW) project was designed to address this need. This three-year project runs from October 2021 through October 2024 starting with a field data collection period followed by model validation activities. RAAW is a partnership between GE Renewable Energy and the United States Department of Energy (DOE) through the National Renewable Energy Laboratory (NREL) and Sandia National Laboratories. The field experiment is designed to make detailed measurements of the inflow, wind turbine response, and the resulting wake. The experimental dataset will be suitable for validating wind turbine models across the fidelity spectrum from actuator disk methods to blade-resolved codes.

17 WIND ENERGY↗
DOE OSTI2023

HawaiiCoast_GT Code Generation

SAND2024-01823O The HawaiiCoast_GT dataset validates anomaly detection algorithms on marine vessel tracks. The software also curates the dataset by extracting, filtering, cleaning, correlating, and computing. The codebase demonstrates the overarching methodology for deriving datasets like HawaiiCoast_GT. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Henriksen, Amelia↗
NASA NTRSDate not supplied

Geophysical Retrievals and Cloud Analyses from Merged Airborne Radiometer Datasets Covering 10–684 GHz

Airborne microwave radiometers provide insight about numerous aspects of Earth’s atmosphere and yield critical validation datasets for spaceborne radiometers. Three radiometers that are important to NASA’s airborne remote-sensing arsenal include: the Advanced Microwave Precipitation Radiometer (AMPR), covering 10–85 GHz; the Conical Scanning Millimeter-wave Imaging Radiometer (CoSMIR), covering 50–183 GHz; and the Compact Scanning Submillimeter-wave Imaging Radiometer (CoSSIR), covering 170–684 GHz. The NASA field campaigns of interest to this study include: the Integrated Precipitation and Hydrology Experiment (IPHEx) in 2014, the Olympic Mountains Experiment and Radar Definition Experiment (OLYMPEX/RADEX) in 2015–2016, the Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS) in 2020–2023, and the Airborne Lightning Observatory for FEGS and TGFs (ALOFT) in 2023. To provide a more comprehensive perspective on clouds and precipitation observed during these airborne field campaigns, AMPR data were merged spatiotemporally with CoSMIR data for IPHEx, OLYMPEX/RADEX, and IMPACTS (2020 and 2022), while considering differences in instrument characteristics and operations, providing brightness temperature (Tb) values from 10–183 GHz in a common background grid throughout each flight. AMPR and CoSSIR data were similarly merged for IMPACTS (2023) and ALOFT, providing a common background grid with Tb values covering 10–684 GHz throughout each flight. These merged Tb data were employed in geophysical retrievals using the Community Radiative Transfer Model (CRTM), an Eddington radiative transfer model, and a one-dimensional variational (1DVAR) inversion method. Retrievals of cloud liquid water path were of primary interest. This presentation will include an overview of the methods for the radiometer data mergers, the radiative transfer methods, the geophysical retrievals, and detailed results from examining trends in Tb and cloud liquid water path in clouds, precipitation, and cloud-to-precipitation transition zones.

Corey G Amiot↗
DOE OSTI2026

Public water supply infrastructure extensification and diversification in surface waters is insufficient to meet future demands in Texas

The data were developed to evaluate the capacity of existing and potential new surface water supply infrastructure to meet projected public water demands across districts in Texas under multiple future socioeconomic and climate scenarios. The database integrates hydrologic, water quality, infrastructure, energy, cost, demographic, and demand-projection information for candidate surface water supply locations. Candidate sites include stream reaches, waterbodies, reservoir surplus locations, and potential new reservoir sites. Water availability is characterized using historical and projected flow conditions, while site suitability is evaluated using five indicators: Water Availability Index (WAI), Water Quality Index (WQI), Energy Requirement Index (ERI), Water Treatment Cost (WTC), and Water Infrastructure Cost (WIC). The datasets include statewide candidate-site information, district-level demand projections under Shared Socioeconomic Pathways (SSPs), runoff-based allocation constraints, climate-stress metrics, and optimization outputs evaluating alternative infrastructure planning strategies. Optimization results compare Business-as-Usual (BAU) and All Surface Water (AllSW) demand-management approaches under both scaled and fixed cost-cap strategies. Associated validation datasets provide district-level feasibility assessments, infrastructure selection outcomes, cost-cap utilization, demand satisfaction metrics, and constraint diagnostics. Additional datasets quantify projected changes in storage and flow conditions as well as water availability stress for both existing and newly selected intake locations under the SSP5 scenario for mid-century and late-century climate conditions. Together, these datasets support assessment of the extent to which surface-water infrastructure expansion and diversification strategies can satisfy future public water demands while accounting for hydrologic, economic, and planning constraints across Texas. Dataset(s) Description Dataset_preoptimization.xlsx Comprehensive pre-optimization dataset containing candidate water-supply sites and associated hydrologic, water-quality, infrastructure, climate, demographic, runoff, and demand-projection variables used as inputs to the optimization analyses. Includes variable descriptions and the full statewide candidate-site database. District_level_site_selection.zip - Compressed archive containing all SSP-specific district-level optimization result files MESIO_ssp1_results.xlsx District-level site selection results for SSP1 (MESIO). Includes variable descriptions, BAU and AllSW site-selection results under scaled and fixed cost strategies, and district-level validation diagnostics. MESID_ssp2_results.xlsx District-level site selection results for SSP2 (MESID). Includes variable descriptions, BAU and AllSW site-selection results under scaled and fixed cost strategies, and district-level validation diagnostics. LCMRD_ssp3_results.xlsx District-level site selection results for SSP3 (LCMRD). Includes variable descriptions, BAU and AllSW site-selection results under scaled and fixed cost strategies, and district-level validation diagnostics. IRDev-Low_ssp4l_results.xlsx District-level site selection results for SSP4-Low (IRDev-Low). Includes variable descriptions, BAU and AllSW site-selection results under scaled and fixed cost strategies, and district-level validation diagnostics. IRDev-High_ssp4h_results.xlsx District-level site selection results for SSP4-High (IRDev-High). Includes variable descriptions, BAU and AllSW site-selection results under scaled and fixed cost strategies, and district-level validation diagnostics. RSIM_ssp5_results.xlsx District-level site selection results for SSP5 (RSIM). Includes variable descriptions, BAU and AllSW site-selection results under scaled and fixed cost strategies, and district-level validation diagnostics. tx_hydrological_stress.xlsx Hydrological stress dataset for existing and newly selected intake locations. Includes projected mid-century and late-century changes, gain/loss classifications, planning strategy information, and accompanying variable descriptions. Also includes water-stress metrics derived from historical and projected low-flow conditions.

Okoye, Perpetua I. (ORCID:0000000215545033)↗
DOE OSTI2026

Comparison of CNN-Based Image Classification Approaches for Implementation of Low-Cost Multispectral Arcing Detection

Camera-based sensing has benefited in recent years from developments in machine learning data processing methods, as well as improved data collection options such as Unmanned Aerial Vehicles (UAV) mounted sensors. However, cost considerations, both for the initial purchase of sensors as well as updates, maintenance, or potential replacement if damaged, can limit adoption of more expensive sensing options for some applications. To evaluate more affordable options with less expensive, more available, and more easily replaceable hardware, we examine the use of machine learning-based image classification with custom datasets, utilizing deep learning based-image classification and the use of ensemble models for sensor fusion. Utilizing the same models for each camera to reduce technical overhead, we showed that for a very representative training dataset, camera-based detection can be successful for detection of electrical arcing. We also use multiple validation datasets, based on conditions expected to be of varying difficulty, to evaluate custom data. These results show that ensemble models of different data sources can mitigate risks from gaps in training data, though the system will be less redundant for those cases unless other precautions are taken. We found that with good quality custom datasets, data fusion models can be utilized without specialization in design to the specific cameras utilized, allowing for less specialized, more accessible equipment to be utilized as multispectral camera components. This approach can provide an alternative to expensive sensing equipment for applications in which lower-cost or more easily replaceable sensing equipment is desirable.

convolutional neural networks↗
DOE OSTI2021

Transformative Materials for High-Efficiency Thermochemical Production of Solar Fuels (Final Report)

Metal oxide-based two-step solar thermochemical (STC) H 2 O and CO 2 -splitting cycles are a promising route to convert solar thermal energy into fuels. The metal oxide materials are reduced at high temperatures (Step 1), and then at low (but still elevated) temperatures, the reduced oxide is used to split H 2 O or CO 2 (Step 2). However, current applications of these cycles are limited by the efficiency of the metal oxide materials. A lower temperature for reduction is desirable, but that brings a concomitant reduction in the driving force for gas splitting. So, designing novel, high-efficiency materials is challenging. Here, we devised and performed a joint computational-experimental project, combined with materials design strategies and high-throughput approaches with the goal to quickly discover and demonstrate novel thermochemical materials with superior properties. Our approach involves an active feedback loop between experimental and computational research. We have use our previously developed materials design map, to efficiently screen results from high-throughput first- principles computation to predict new compositions and subsequently to experimentally study the properties of novel, predicted materials. Experimental measurements of the thermodynamic properties of selected materials serve as a critical benchmark, not only in evaluating the STCH properties of synthesized compounds, but also serving as a validation dataset for computational approaches. We experimentally explored a set of predicted ABO3 perovskites and focus on obtaining high quality thermodynamic properties for validation of computational prediction of enthalpy and entropy of reduction. These thermodynamic quantities play a major role in designing materials with reduced temperatures of reduction but sufficient gas-splitting rates. Finding good validation between experimental and computational data for enthalpies of reduction, we turn to promising ABO3 materials modified by A and B site substitutions, opening an enormous combinatorial space of materials. We use our high-throughput approach to “tune in” the desired solar thermochemical (STC) properties for STC. This vast composition space can only be reasonably explored using the high-throughput approaches, both computational and experimental, of this proposal. Several promising novel oxide materials have been predicted, synthesized, and verified using our materials design approach.

08 HYDROGEN↗
DOE OSTI2023

Predicting future well performance for environmental remediation design using deep learning

Here in this study, we developed a deep learning (DL) framework with a multi-channel three-dimensional convolutional neural network (MC3D-CNN) to predict well performance and thereby assist future environmental remediation design. Such prediction of extraction well performance at designated locations is critical for configuring pump-and-treat (P&T) well network design and operation, setting reasonable target closure dates for overall remedying, and estimating remedy costs. The framework is developed with operational and monitoring data routinely collected during P&T remedy operations, including well extraction and injection rates as well as in situ contaminant concentrations. Traditionally, the collected data were rarely used for purposes other than assessing past well performance and the accuracy of the conceptual site model. However, recent advances in data-driven computational approaches enable better use of the large datasets to inform future well performance, enhance site characterization, and improve remediation planning. In this study, we established a DL framework to integrate transient three-dimensional contaminant plumes and multiple aquifer properties (e.g., hydraulic conductivity and hydrostratigraphic maps) to identify characteristic patterns controlling and representing extraction well mass recovery, aiming at providing future mass recovery estimates for existing wells and candidate wells at any proposed locations. We evaluated our framework by using a realistic synthetic dataset generated from a well-calibrated flow and transport model used in the 200 West Area of the U.S. Department of Energy’s Hanford Site in southeastern Washington state. The multi-channel feature in our framework allows integration of various types and temporal densities of training datasets for DL model development. Overall, we found that the trained DL model achieved an accuracy of over 90% in ranking extraction well performance in validation datasets, and over 80% in predicting high-performance-ranking well locations. This data-informed approach provides a flexible tool to support adaptive site management, streamline decision-making, and potentially reduce remediation time and costs. Our DL framework can be used as a filtering tool to improve the current P&T network optimization design by reducing the number of candidate well locations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Using active learning to improve quasar identification for the DESI spectra processing pipeline

The Dark Energy Spectroscopic Instrument (DESI) survey uses an automatic spectral classification pipeline to classify spectra. QuasarNET is a convolutional neural network used as part of this pipeline originally trained using data from the Baryon Oscillation Spectroscopic Survey (BOSS). In this paper we implement an active learning algorithm to optimally select spectra to use for training a new version of the QuasarNET weights file using only DESI data, with the goal of improving classification accuracy. This active learning algorithm includes a novel outlier rejection step using a Self-Organizing Map to ensure we label spectra representative of the larger quasar sample observed in DESI. We perform two iterations of the active learning pipeline, assembling a final dataset of 5600 labeled spectra, a small subset of the approximately 1.3 million quasar targets in DESI's Data Release 1. When splitting the spectra into training and validation subsets we achieve similar performance to the previously trained weights file in completeness and purity calculated on the validation dataset but do so with less than one tenth of the amount of training data. The new weights also more consistently classify objects in the same way when used on unlabeled data compared to the old weights file. In the process of improving QuasarNET's classification accuracy we discovered a systemic error in QuasarNET's redshift estimation and used our findings to improve our understanding of QuasarNET's redshifts.

Machine learning↗
DOE OSTI2025

Developing predictive models for µ opioid receptor binding using machine learning and deep learning techniques

Opioids exert their analgesic effect by binding to the µ opioid receptor (MOR), which initiates a downstream signaling pathway, eventually inhibiting pain transmission in the spinal cord. However, current opioids are addictive, often leading to overdose contributing to the opioid crisis in the United States. Therefore, understanding the structure-activity relationship between MOR and its ligands is essential for predicting MOR binding of chemicals, which could assist in the development of non-addictive or less-addictive opioid analgesics. This study aimed to develop machine learning and deep learning models for predicting MOR binding activity of chemicals. Chemicals with MOR binding activity data were first curated from public databases and the literature. Molecular descriptors of the curated chemicals were calculated using software Mold2. The chemicals were then split into training and external validation datasets. Random forest, k-nearest neighbors, support vector machine, multi-layer perceptron, and long short-term memory models were developed and evaluated using 5-fold cross-validations and external validations, resulting in Matthews correlation coefficients of 0.528–0.654 and 0.408, respectively. Furthermore, prediction confidence and applicability domain analyses highlighted their importance to the models’ applicability. Our results suggest that the developed models could be useful for identifying MOR binders, potentially aiding in the development of non-addictive or less-addictive drugs targeting MOR.

Research & Experimental Medicine↗
NASA NTRS2016

Validation of Ocean Color Remote Sensing Reflectance Using Autonomous Floats

The use of autonomous proling oats for observational estimates of radiometric quantities in the ocean is explored, and the use of this platform for validation of satellite-based estimates of remote sensing reectance in the ocean is examined. This effort includes comparing quantities estimated from oat and satellite data at nominal wavelengths of 412, 443, 488, and 555 nm, and examining sources and magnitudes of uncertainty in the oat estimates. This study had 65 occurrences of coincident high-quality observations from oats and MODIS Aqua and 15 occurrences of coincident high-quality observations oats and Visible Infrared Imaging Radi-ometer Suite (VIIRS). The oat estimates of remote sensing reectance are similar to the satellite estimates, with disagreement of a few percent in most wavelengths. The variability of the oatsatellite comparisons is similar to the variability of in situsatellite comparisons using a validation dataset from the Marine Optical Buoy (MOBY). This, combined with the agreement of oat-based and satellite-based quantities, suggests that oats are likely a good platform for validation of satellite-based estimates of remote sensing reectance.

In Situ Oceanic Observations↗
DOE OSTI2021

Bias Characterization, Vertical Interpolation, and Horizontal Interpolation for Distributed Wind Siting Using Mesoscale Wind Resource Estimates

Much like their counterparts in utility-scale wind energy, developers of industrial, small-scale and distributed wind turbine deployments need to understand and accurately characterize the wind resource to properly assess the power generation and financial ramifications during siting and planning. National Renewable Energy Laboratory’s WIND (Wind Integration National Dataset) Toolkit (WTK) provides a best-in-class wind resource dataset generated using the Weather Research and Forecasting (WRF) model. This dataset includes parameters such as the wind speed, wind direction, and temperature at various heights, plus atmospheric stability near the surface. This data is available at 2-km spatial resolution and five-minute temporal resolution across 7 years, from 2007 to 2013 through a publicly accessible API interface. The Tools Assessing Performance (TAP) project seeks to extend this dataset to allow long term resource estimates and leverage it to better equip distributed wind equipment manufacturers, owner-operators, and installation professionals with better tools for practical siting applications. In this report, we present the results from our investigation within the TAP project focused on characterization of bias in WTK-based wind speed estimates and evaluation of vertical and horizontal interpolation techniques. We discuss the tradeoffs between different techniques and their combinations, as well as describe the lower bounds we determine for the studied validation errors. While the specific estimates we present are specific to WTK and the validation dataset we have chosen for this investigation (NREL's Wind Resource Meteorological Database), the overall analysis and the studied techniques are general enough to be applied to a broader set of wind datasets, both simulation-based and observational.

17 WIND ENERGY↗
DOE OSTI2023

MnEdgeNet for accurate decomposition of mixed oxidation states for Mn XAS and EELS L2,3 edges without reference and calibration

Accurate decomposition of the mixed Mn oxidation states is highly important for characterizing the electronic structures, charge transfer and redox centers for electronic, and electrocatalytic and energy storage materials that contain Mn. Electron energy loss spectroscopy (EELS) and soft X-ray absorption spectroscopy (XAS) measurements of the Mn L2,3 edges are widely used for this purpose. To date, although the measurements of the Mn L2,3 edges are straightforward given the sample is prepared properly, an accurate decomposition of the mix valence states of Mn remains non-trivial. For both EELS and XAS, 2+, 3+, and 4+ reference spectra need to be taken on the same instrument/beamline and preferably in the same experimental session because the instrumental resolution and the energy axis offset could vary from one session to another. To circumvent this hurdle, in this study, we adopted a deep learning approach and developed a calibration-free and reference-free method to decompose the oxidation state of Mn L2,3 edges for both EELS and XAS. A deep learning regression model is trained to accurately predict the composition of the mix valence state of Mn. To synthesize physics-informed and ground-truth labeled training datasets, we created a forward model that takes into account plural scattering, instrumentation broadening, noise, and energy axis offset. With that, we created a 1.2 million-spectrum database with 1-by-3 oxidation state composition ground truth vectors. The library includes a sufficient variety of data including both EELS and XAS spectra. By training on this large database, our convolutional neural network achieves 85% accuracy on the validation dataset. We tested the model and found it is robust against noise (down to PSNR of 10) and plural scattering (up to t/λ = 1). We further validated the model against spectral data that were not used in training. In particular, the model shows high accuracy and high sensitivity for the decomposition of Mn 3 O 4 , MnO, Mn 2 O 3 , and MnO 2 . The accurate decomposition of Mn 3 O 4 experimental data shows the model is quantitatively correct and can be deployed for real experimental data. Our model will not only be a valuable tool to researchers and material scientists but also can assist experienced electron microscopists and synchrotron scientists in the automated analysis of Mn L edge data.

25 ENERGY STORAGE↗
NASA NTRS1993

Validated environmental and physiological data from the CELSS Breadboard Projects Biomass Production Chamber. BWT931 (Wheat cv. Yecora Rojo)

This KSC database is being made available to the scientific research community to facilitate the development of crop development models, to test monitoring and control strategies, and to identify environmental limitations in crop production systems. The KSC validated dataset consists of 17 parameters necessary to maintain bioregenerative life support functions: water purification, CO2 removal, O2 production, and biomass production. The data are available on disk as either a DATABASE SUBSET (one week of 5-minute data) or DATABASE SUMMARY (daily averages of parameters). Online access to the VALIDATED DATABASE will be made available to institutions with specific programmatic requirements. Availability and access to the KSC validated database are subject to approval and limitations implicit in KSC computer security policies.

Stutte, G. W.↗
NASA NTRS2011

The NASA CloudSat/GPM Light Precipitation Validation Experiment (LPVEx)

Ground-based measurements of cool-season precipitation at mid and high latitudes (e.g., above 45 deg N/S) suggest that a significant fraction of the total precipitation volume falls in the form of light rain, i.e., at rates less than or equal to a few mm/h. These cool-season light rainfall events often originate in situations of a low-altitude (e.g., lower than 2 km) melting level and pose a significant challenge to the fidelity of all satellite-based precipitation measurements, especially those relying on the use of multifrequency passive microwave (PMW) radiometers. As a result, significant disagreements exist between satellite estimates of rainfall accumulation poleward of 45 deg. Ongoing efforts to develop, improve, and ultimately evaluate physically-based algorithms designed to detect and accurately quantify high latitude rainfall, however, suffer from a general lack of detailed, observationally-based ground validation datasets. These datasets serve as a physically consistent framework from which to test and refine algorithm assumptions, and as a means to build the library of algorithm retrieval databases in higher latitude cold-season light precipitation regimes. These databases are especially relevant to NASA's CloudSat and Global Precipitation Measurement (GPM) ground validation programs that are collecting high-latitude precipitation measurements in meteorological systems associated with frequent coolseason light precipitation events. In an effort to improve the inventory of cool-season high-latitude light precipitation databases and advance the physical process assumptions made in satellite-based precipitation retrieval algorithm development, the CloudSat and GPM mission ground validation programs collaborated with the Finnish Meteorological Institute (FMI), the University of Helsinki (UH), and Environment Canada (EC) to conduct the Light Precipitation Validation Experiment (LPVEx). The LPVEx field campaign was designed to make detailed measurements of cool-season light precipitation by leveraging existing infrastructure in the Helsinki Precipitation Testbed. LPVEx was conducted during the months of September--October, 2010 and featured coordinated ground and airborne remote sensing components designed to observe and quantify the precipitation physics associated with light rain in low-altitude melting layer environments over the Gulf of Finland and neighboring land mass surrounding Helsinki, Finland.

Petersen, Walter A.↗
NASA NTRSDate not supplied

Fundamental Test of a Hovering Rotor: Comprehensive Measurements for CFD Validation

A model-scale hover test of a 4-bladed, 11.08-ft diameter rotor was recently completed inside the National Full-Scale Aerodynamics Complex 80- by 120-Foot Wind Tunnel test section. The primary objective of the test was to acquire key experimental data for a hovering rotor of sufficient quality and quantity to allow validation of state-of-the-art analysis codes. A comprehensive measurement set has been acquired, including rotor performance, blade airloads, flow transition locations, blade deflections, and wake geometry for a range of tip Mach numbers and collective settings. The present paper provides an overview of the test, including detailed descriptions of the hardware, instrumentation, and measurement systems. In addition, the specific test objectives, approach, and sample results are presented. The full test database, as well as detailed rotor geometry information, will ultimately be shared openly on a NASA-sponsored website to serve as a benchmark validation dataset.

Hover↗