Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “u-shaped”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Metal shearing energy absorber

A metal shearing energy absorber is described. The absorber is composed of a flat thin strip of metal which is pulled through a slot in a cutter member of a metal, harder than the metal of the strip. The slot's length, in the direction perpendicular to the pull direction, is less than the strip's width so that as the strip is pulled through the slot, its edges are sheared off, thereby absorbing some of the pulling energy. In one embodiment the cutter member is a flat plate of steel, while in another embodiment the cutter member is U-shaped with the slot at its base.

Fay, R. J.↗
NASA NTRS1976

Catheter tip force transducer for cardiovascular research

A force transducer for measuring dynamic force activity within the heart of a subject essentially consists of a U-shaped beam of low elastic compliance material. Two lines extend from the beams's legs and a long coil spring is attached to the beam. A strain gauge is coupled to one of the beam's legs to sense deflections thereof. The beam with the tines and most of the spring are surrounded by a flexible tube, defining a catheter, which is insertable into a subject's heart through an appropriate artery. The tines are extractable from the catheter for implantation into the myocardium by pushing on the end of the spring which extends beyond the external end of the catheter.

Feldstein, C.↗
NASA NTRS1976

The development of large diameter, high pressure, cryogenic radial static seals

Two configurations of radial static seals are developed for high-pressure 773 kg per sq cm cryogenic applications: a U-shaped fluorocarbon seal and a delta-shaped PTFE seal. The U-seal is a common commercial design consisting of a spring-loaded cup-shaped jacket; the basic principle is that the soft plastic jacket provides the interface between the piston and the bore, the jacket being held in place by a metal spring. The delta seal is based on the principle that the soft plastic delta cross section furnishes the interface at the metal face and circumferential face of the gland and cylinder. Test results indicate that both the plastic U-seal and the delta seal designs are sufficiently flexible to accommodate assembly in bore or piston grooves. Of these two configurations, the delta seal is found to be superior as it meets all the design requirements for proof pressure testing the turbopump components of the main engine in the Space Shuttle.

Burr, M. E.↗
NASA NTRS1977

A high Reynolds number numerical solution of the Navier-Stokes equations in stream function-vorticity form

Problems encoutered in investigations of high Reynolds number, incompressible flow are reviewed. A numerical solution computer program was modified to solve the stream function-vorticity form of the Navier-Stokes equations. Using a body fitted coordinate system with a U-shaped outer boundary, a simulation of incompressible flow at a Reynolds number of one million and a body angle of attack of zero was achieved.

Bearden, J. H.↗
NASA NTRS1979

Metallic thermal seal

Thermal barrier, constructed of U-shaped metal strips and room temperature-vulcanized silicon rubber, prevents hot gas from escaping through gaps. In application metallic barrier could be used to prevent heat from escaping through gaps around door, windows, partitions, and similar structures.

Bellavia, J.↗
NASA NTRS1978

Variable-temperature cryogenic trap for the separation of gas mixtures

The paper describes a continuous variable-temperature U-shaped cold trap which can both purify vacuum-line combustion products for subsequent stable isotopic analysis and isolate the methane and ethane constituents of natural gases. The canister containing the trap is submerged in liquid nitrogen, and, as the gas cools, the gas mixture components condense sequentially according to their relative vapor pressures. After the about 12 min required for the bottom of the trap to reach the liquid-nitrogen temperature, passage of electric current through the resistance wire wrapped around the tubing covering the U-trap permits distillation of successive gas components at optimal temperatures. Data on the separation achieved for two mixtures, the first being typical vacuum-line combustion products of geochemical samples such as rocks and the second being natural gas, are presented, and the thermal behavior and power consumption are reported.

Des Marais, D. J.↗
NASA NTRS1980

Strain relief for power-cable connectors

Easily fabricated grommet composed of polytetrafluoroethylene cylinder, containing U-shaped channels equally spaced around periphery, is used in power cable connectors to relieve strain on cables. Utilization of grommets provides more ease in cable insertion and removal. Potential applications include wiring in large residential and commercial buildings.

Dean, W. T., III↗
NASA NTRS1978

Heat exchanger

A heat exchanger, as exemplified by a rocket combustion chamber, is constructed by stacking thin metal rings having microsized openings therein at selective locations to form cooling passages defined by an inner wall, an outer wall and fins. Suitable manifolds are provided at each end of the rocket chamber. In addition to the cooling channel openings, coolant feed openings may be formed in each of rings. The coolant feed openings may be nested or positioned within generally U-shaped cooling channel openings. Compression on the stacked rings may be maintained by welds or the like or by bolts extending through the stacked rings.

Sokolowski, D. E.↗
NASA NTRS1980

Improved characterization of the Si-SiO2 interface

Refined quasi-static and conductance methods, based on effectively thin composite insulating layers, low-carrier-concentration bulk semiconductors, and low-level illumination, have been applied to an improved characterization of the (100) Si-SiO2 interface. Accurate measurement of both the total density of interface states and its major components as a function of energy in the forbidden gap have been made over four decades (10-billion to 100-trillion states/eV sq cm) on a single sample. The normal U-shaped density of states is resolved into separate valence- and conduction-band-derived contributions as well as impurity-derived contributions corresponding to concentrations on the order of 20 ppm at the interface.

Su, P.↗
NASA NTRS1980

On the distribution of radio emission in the X-ray cluster of galaxies Abell 401

The study deals with 4885-MHz very large array (VLA) observations of four galaxies in the rich cluster Abell 401. High-resolution VLA maps reveal several new features in the radion galaxies, e.g., 4C13.17A is unusually highly polarized near the galaxy nucleus unlike other head-tail sources. 4C13.17B is shown for the first time to have characteristics similar to the U-shaped source NGC 1265. From these maps models are produced that required the hot ICM that has been detected by X-ray observations. It is noted that there should be a correlation between the radio and X-ray emission from massive galaxies in clusters.

Burns, J. O.↗
NASA NTRS1982

EMR Gage Would Measure Coal Thickness Accurately

Laboratory tests indicate electron magnetic resonance (EMR) would be effective in measuring thickness of coal overlying rock substrate. In prototype dual-frequency EMR system, Sample is irradiated by two radio frequencies. Signals are mixed, producing sum and difference output frequencies that are detected by receiver. Magnetic field is varied to scan resonant spot through sample. In system designed for field use, electromagnet is U-shaped, so that sample can be adjacent to, rather than inside the probe. Same coil is used for transmitting and receiving.

King, J. D.↗
NASA NTRS1982

High-Temperature Captive Nut Assembly

High-temperature captive-nut assembly consists of removable nut element that snaps into loose-fitting recesses in shell. Replacement of nut element is easily accomplished with simple handtools. Old nut is pried out and new one pushed into position. Removal is easily accomplished with help of U-shaped tool.

Marke, M. L.↗
NASA NTRS1982

Ice sculpture in the Martian outflow channels

Viking Orbiter and terrestrial satellite images are examined at similar resolution to compare features of the Martian outflow channels with features produced by the movement of ice on earth, and many resemblances are found. These include the anastomoses, sinuosities, and U-shaped cross profiles of valleys; hanging valleys; linear scour marks on valley walls; grooves and ridges on valley floors; and the streamlining of bedrock highs. Attention is given to the question whether ice could have moved in the Martian environment. It is envisaged that springs or small catastrophic outbursts discharged fluids from structural outlets or chaotic terrains. These fluids built icings that may have grown into substantial masses and eventually flowed like glaciers down preexisting valleys. An alternative is that the fluids formed rivers or floods that in turn formed ice jams and consolidated into icy masses in places where obstacles blocked their flow.

Lucchitta, B. K.↗
NASA NTRS1985

Flexible Liquid-Transport Tube

Flexible tube with zipper type arrangements of U-shaped side ribs and top plates allows liquids both transported and removed.

Collins, E. R., Jr.↗
NASA NTRS1984

Curved cap corrugated sheet

The report describes a structure for a strong, lightweight corrugated sheet. The sheet is planar or curved and includes a plurality of corrugation segments, each segment being comprised of a generally U-shaped corrugation with a part-cylindrical crown and cap strip, and straight side walls and with secondary corrugations oriented at right angles to said side walls. The cap strip is bonded to the crown and the longitudinal edge of said cap strip extends beyond edge at the intersection between said crown and said side walls. The high strength relative to weight of the structure makes it desirable for use in aircraft or spacecraft.

Davis, R. C.↗
NASA NTRS1984

Aminoacyl-nucleotide reactions - Studies related to the origin of the genetic code and protein synthesis

In the present paper, a report is presented on the effect of pH and carbonate on the hydrolysis rate constants of N-blocked and free aminoacyl adenylate anhydrides. Whereas the hydrolysis of free aminoacyl adenylates seems principally catalyzed by OH(-), the hydrolysis of the N-blocked species is also catalyzed by H(+), giving this compound a U-shaped hydrolysis vs. pH curve. Furthermore, at pH's less than 8, carbonate has an extreme catalytic effect on the hydrolysis of free aminoacyl-AMP anhydride, but essentially no effect on the hydrolysis of N-blocked aminoacyl-AMP anhydride. Furthermore, the N-blocked aminoacyl-AMP anhydride is a very efficient generator of peptides using free glycine as acceptor. The possible significance of the observations to prebiological peptide synthesis is discussed.

Mullins, D. W., Jr.↗
NASA NTRS1985

Electrical characterization of plasma-grown oxides on gallium arsenide

Plasma-grown GaAs oxides and their interfaces have been characterized by measuring the electrical properties of metal-oxide-semiconductor capacitors and of Schottky junctions. The current transport mechanism in the oxide at high electrical field was found to be Frankel-Poole emission, with an electron trap center at 0.47 eV below the conduction band of the oxide. The interface-state density, evaluated from capacitance and conductance measurements, exhibits a U-shaped interface-state continuum extending over the entire band gap. Two discrete deep states with high concentration are superimposed on this continuum at 0.40 and 0.70 eV below the conduction band. The results obtained from measurements on Schottky junctions have excluded the possibility that these two deep states originate from plasma damage. Possible origins of these states are discussed in this paper.

Hshieh, F. I.↗
NASA NTRS1979

Circuit Connectors

The U-shaped wire devices in the upper photo are Digi-Klipsm; aids to compact packaging of electrical and electronic devices. They serve as connectors linking the circuitry of one circuit board with another in multi-board systems. Digi-Klips were originally developed for Goddard Space Flight Center to meet a need for lightweight, reliable connectors to replace hand-wired connections formerly used in spacecraft. They are made of beryllium copper wire, noted for its excellent conductivity and its spring-like properties, which assure solid electrical contact over a long period of time.

Source record↗