Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “two-photon processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Radiative cooling of a low-density plasma

The paper extends and improves the radiative cooling coefficient calculations of Cox and Tucker (1969) and Cox and Daltabuit (1971) for a low-density optically thin plasma with no molecules or dust, of cosmic abundances in the range from 10,000 to 100,000,000 K. Earlier rates applied to a plasma containing H, He, C, N, O, Ne, Mg, Si, and S; the present study added Ca, Fe, and Ni. For the elements included, many individual lines are calculated which previously has been averaged together. The cooling processes considered are permitted, forbidden, and semiforbidden line transitions, including contributions from dielectronic recombination and bremsstrahlung, radiative recombination, and two-photon continua. The ionization balance is calculated in collisional equilibrium using an approximate auto-ionization following inner-shell excitation and the low-density limit for the dielectronic recombination rate. Cooling in various observational bands in the soft X-ray region is determined.

Raymond, J. C.↗
NASA NTRS1980

Pair annihilation in superstrong magnetic fields

The kinematical and dynamical aspects of the annihilation processes in superstrong magnetic fields are studied. The feasibility and potential significance of detecting from magnetic neutron stars are discussed. The discussion proceeds from the derivation of the fully relativistic differential cross sections and annihilation rates for both one- and two-photon emission from a ground-state gas of electrons and positrons in a static, uniform magnetic field.

Daugherty, J. K.↗
NASA NTRS1985

Theoretical study relating the two-photon absorption cross section to the susceptibility controlling four-wave mixing

A theory that it is necessary to extract a two-photon absorption cross section from a mixing signal is developed. The dependence of the cross section on the third-order susceptibility is shown and both the mixing signal and reference signal dependences on the susceptibility are given. Techniques to process the measured value of the susceptibility and relate it to the cross section are developed and limits of validity are established. Finally, a comparison is made between the expression for the cross section presently reported and values given elsewhere.

Burris, J.↗
DOE OSTI2025

Ultra-high Information-content Chemical Imaging with Broadband Coherent Anti-Stokes Raman and Two-photon Fluorescence Lifetime Microscopy

Raman fingerprint spectroscopy and fluorescence lifetime imaging are emerging tools for studying metabolic profiles of biological specimens. While Raman fingerprint spectroscopy detects intrinsic molecular vibrations that reflect the molecular composition and chemical environment of a sample, fluorescence lifetime imaging measures changes in the excited-state lifetime of fluorophores that are sensitive to their microenvironments. Here, we present a multimodal imaging platform combining broadband coherent anti-Stokes Raman scattering (BCARS) and two-photon fluorescence lifetime imaging (2p-FLIM) microscopy that can acquire biologically relevant Raman fingerprint spectra and fluorescence lifetime signals in vivo and simultaneously. The tremendous chemical information obtained from spatially co-registered BCARS and 2p-FLIM images allows us to characterize the subtle differences between sub-cellular compartments and verify the potential false-positive results generated by fluorescence imaging alone. This is demonstrated by directly comparing the BCARS, 2p-FLIM, and two-photon excitation fluorescence(TPEF) signals simultaneously obtained from the same dye-stained organelle in the live, intact C. elegans expressing a green fluorescent protein (GFP) marker. In this work, we introduce the BCARS/2p-FLIM/TPEF setup scheme, the image acquisition steps, data processing, and representative results showing that the cross-modality imaging method enables rigorous characterization and in vivo detection at sub-cellular resolution. Furthermore, this protocol provides a framework for simultaneous chemical and fluorescence lifetime imaging to improve the accuracy of biological interpretation in complex living systems.

Xu, Haoyu [Georgia Institute of Technology, Atlant↗
DOE OSTI2026

Fully Additively Manufactured Wetted Foam Capsules for Inertial Confinement Fusion

In the pursuit of realizing reliable clean energy generation via inertial confinement fusion (ICF), wetted foam (WF) capsule targets have long been coveted due to their potential to simplify the target fielding process and suppress hydrodynamic instabilities and material mixing that limit achievable energy output, yet producing and deploying a WF target has proven challenging. Here, in this work, we demonstrate the design, fabrication, metrology, and testing of fully additively manufactured (AM) foam-lined capsules using two-photon polymerization (2PP) for ICF. We successfully fielded an AM polymeric foam capsule with a 3-mm outer diameter, a nominally 15-µm-thick solid outer layer, a 120-µm-thick inner foam layer, and a 250-µm outer diameter copper fill tube on the National Ignition Facility for a polar direct-drive shot, and we showcase deuterium wetting of the capsule foam layer inside an ignition target proofing station. Our exploration showed that 2PP can produce fieldable targets with complex geometries and potentially shorten the design iteration turnaround time and the overall target fabrication time.

Target↗
DOE OSTI2025

3D-printed micro ion trap technology for quantum information applications

Trapped-ion applications, such as in quantum information processing1, precision measurements, optical clocks and mass spectrometry, rely on specialized high-performance ion traps. The last three of these applications typically use traditional machining to customize macroscopic 3D Paul traps, whereas quantum information processing experiments usually rely on photolithographic techniques to miniaturize the traps and meet scalability requirements. Using photolithography, however, it is challenging to fabricate the complex 3D electrode structures required for optimal confinement. Here, in this work, we demonstrate a high-resolution 3D printing technology based on two-photon polymerization (2PP) that is capable of fabricating large arrays of high-performance miniaturized 3D traps. We show that 3D-printed ion traps combine the advantages, such as strong radial confinement, of traditionally machined 3D traps with on-chip miniaturization. We trap calcium ions in 3D-printed ion traps with radial trap frequencies ranging from 2 MHz to 24 MHz. The tight confinement eases ion cooling requirements and allows us to implement high-quality Rabi oscillations with Doppler cooling only. Also, we demonstrate a two-qubit gate with a Bell-state fidelity of 0.978 ± 0.012. With 3D printing technology, the design freedom is greatly expanded without sacrificing scalability and precision, so that ion trap geometries can be optimized for higher performance and better functionality.

quantum information↗
DOE OSTI2025

3D nanolithography with metalens arrays and spatially adaptive illumination

The growing demand for advanced materials, miniaturized devices and integrated microsystems calls for the reliable fabrication of complex, multiscale, three-dimensional (3D) architectures, a need increasingly addressed through light-based and laser-based processes. However, owing to the field-of-view (FOV) limitations of conventional imaging optics, existing 3D laser nanofabrication techniques face fundamental challenges in throughput, proximity error and stitching defects on the path to scaling. Here, in this study, we present a scalable 3D nanofabrication platform that uses a metalens-generated focal spot array to parallelize two-photon lithography (TPL) beyond centimetre-scale write field areas. Metalenses are ideally suited for producing submicron-scale focal spots for high-throughput nanolithography, as they uniquely feature large numerical apertures (NAs), immersion media compatibility and large-scale manufacturability. We experimentally demonstrate a printing system that uses a 12-cm 2 metalens array to produce more than 120,000 cooperative focal spots, corresponding to a throughput exceeding 10 8 voxels s −1 . By programmatically patterning the focal spot array using a spatial light modulator (SLM), an adaptive parallel printing strategy is developed for precise greyscale linewidth modulation and choreographed printing of semiperiodic and fully aperiodic 3D geometries. We demonstrate parallel printing of replicated microstructures (>50 M microparticles per day), centimetre-scale 3D architectures with feature sizes down to 113 nm, and photonic and mechanical metamaterials. This work demonstrates the potential of 3D nanolithography towards wafer-scale production, showing how TPL could be used at scale for applications in microelectronics, biomedicine, quantum technology and high-energy laser targets.

Materials science↗
DOE OSTI2026

New correlated numerical methods for attosecond molecular single and double ionization

This project resulted in the development of ASTRA, a new molecular ionization code capable of describing single and double ionization processes in polyatomic molecules with correlated electrons and time-dependent fields. Key achievements include: (i) the development of the PRISM hybrid-integral library enabling core-ionization and high-angular-momentum convergence; (ii) implementation of time-dependent Schrödinger equation solvers for pump–probe spectroscopies; (iii) validation against experimental and theoretical benchmarks for atoms and molecules; and (iv) extension to two-photon double ionization using the finite-pulse virtual-sequential model. These developments establish ASTRA as a versatile platform for attosecond molecular dynamics.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Coupling to rotational manifolds to improve gas-phase pump–probe spectroscopic models

The physical picture of gas-phase optical transitions is normally presented as an isolated two-level system balanced by upward and downward processes. Isolated models assume a phenomenological treatment of collisional dephasing but do not strictly account for collisional population exchange with the rotational baths. While this assumption is valid under low-intensity conditions, where excitation is rate-limiting, isolated models can deviate from Beer’s Law at sufficient pressures and monochromatic intensities when both collisional broadening and power broadening are comparable to (or greater than) lifetime broadening, which are not uncommon conditions for cavity enhanced spectroscopies in the mid-IR spectral range. Although this problem has been addressed by rate-equation models for linear absorption measurements, a general treatment for multi-level quantum mechanical models suitable for non-linear absorption measurements (two-photon/two-color/pump–probe) is lacking. Isolated models require physical parameter inputs that disagree with expected values by at least an order of magnitude. These non-physical models undermine the ability to predict non-linear signal strengths under untested conditions and thereby limit the potential to optimize the sensitivity of non-linear spectroscopies and to expand their analytical applications (e.g., new analytes and/or buffer gases, changes in cavity free-spectral-range, changes in intracavity powers or wavelengths, and accurate investigation of physical phenomena). In this study, we derive bath-coupled models for gaseous pump–probe spectroscopy by application of the quantum Lindblad equation and detailed balance. Bath-coupled models are shown to fit data consistently across variations in intensity and agree with all physically expected values.

Cavity ring-down spectroscopy↗
NASA NTRS1985

Enhancement of intensity-dependent absorption in InP and GaAs at 1.9 microns by doping

It is pointed out that the study of intensity-dependent absorption (IDA) in general, and two-photon absorption (TPA), in particular, has suffered from experimental difficulties and inadequate theoretical models. Bass et al. (1979) could improve the experimental situation by making use of laser calorimetry to obtain directly the TPA coefficient of a medium with a high degree of sensitivity. In the present investigation, the employed technique has been used to study the effect of deep level dopants on IDA in InP and GaAs. It is found that the coefficient for IDA is strongly dependent on the presence of Fe in InP and Cr in GaAs. The conducted investigation had the objective to examine the effect of deep level impurities on IDA processes in InP and GaAs. Fe-doped InP and Cr-doped GaAs were compared with undoped crystals.

Li, N.-L.↗
DOE OSTI2025

Photoionization of seeded combustion products as a method of enhancing the efficiency of magnetohydrodynamic power generators

Here, in this study, we performed an experimental and computational investigation into the feasibility of utilizing photoionization to enhance the electrical conductivity of seeded oxy-fuel combustion products and improve the performance of magnetohydrodynamic (MHD) power generators. We applied a variety of optical and microwave diagnostics to study the ionization and recombination processes of potassium excited by an excimer laser in a high-velocity oxy-fuel free jet. Computational fluid dynamic (CFD) simulations were performed to model the thermophysical properties and species densities of the free jet. The CFD results were validated with position-dependent potassium concentration measurements. Electron recombination exponential lifetimes were measured through time-resolved microwave transmission. The experimental electron lifetimes were compared with lifetimes calculated from CFD-predicted species densities and literature recombination rates. It was determined that K + or O 2 are the most likely recombination partners for photoionized electrons. Time-resolved fluorescence measurements provided evidence of an ionization pathway involving a two-photon ionization of KOH . Finally, a zero-dimensional chemical kinetic model was developed to assess the fundamental viability of inducing a non-equilibrium electron population to provide a net energy return in combustion-driven MHD power generators. We determined that a high energy return is feasible for targeting electrode boundary layers with ultraviolet photoionization. We also found that photoionization could potentially lower the required temperature of the bulk gas flow.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2026

Suppressing proximity effects during rapid serial two-photon lithography through tuning of reaction–diffusion kinetics

The ability of two-photon lithography (TPL) to print deterministic nanoporous 3D structures is highly valuable for many applications. However, it is challenging to print such structures rapidly due to the proximity effects that cause closely spaced features to enlarge and merge. A key challenge is the limited understanding of the origins and spatiotemporal dynamics of the long-range proximity effects that extend beyond the optical focal spot. Here, we empirically investigate these proximity effects in serial TPL using custom-made acrylate-based photoresists. We demonstrate that the complex spatiotemporal dynamics of the proximity effects can be explained through the kinetics of the reaction–diffusion photopolymerization mechanisms that underlie the curing process. Specifically, we show that the proximity effects arise due to comparable timescales of reaction and diffusion of oxygen. Furthermore, we demonstrate that long-range proximity effects can be suppressed by introducing phenolic inhibitors, which reduce oxygen consumption through non-inhibiting side reactions and promote faster termination of curing reactions. These insights enabled improving the linewidths from >400 to 260 nm during printing of nanoporous 3D woodpiles at scanning speeds of 50 mm s −1 . Thus, the knowledge generated here can be applied to deterministically tune the proximity effects and enable rapid printing of high-resolution nanoporous 3D structures.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Grayscale projection two-photon lithography using sub-diffraction motifs for ultrafast and precise nanoscale 3D printing

Rapid and high-fidelity nanoscale 3D printing is highly desirable, but it is difficult due to the tradeoff between speed and accuracy. Although optical projection techniques can massively scale up printing, fidelity is compromised due to the difficulty in precisely controlling the light dosage over the entire field. This challenge is typically addressed by using multiple projections, but it slows down printing. Here, we present grayscale projection two-photon lithography to overcome this tradeoff. Despite using a binary mask, it enables projecting more than 15,000 focal spots, each with independently tunable intensity. It advantageously leverages constraints imposed by optical diffraction to achieve grayscale tuning over the entire field at once. By directly tuning the focal spot intensities, we demonstrate suppression of proximity effects, compensation of non-uniform illumination, compensation of stitching artefacts, and rapid 3D printing with a single femtosecond pulse per layer. We demonstrate printing of nanowires as thin as 55 nm and achieve rates of 1.7 billion voxels/s and 215 mm 3 /hr.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quantum optical classifier with superexponential speedup

Abstract Classification is a central task in deep learning algorithms. Usually, images are first captured and then processed by a sequence of operations, of which the artificial neuron represents one of the fundamental units. This paradigm requires significant resources that scale (at least) linearly in the image resolution, both in terms of photons and computational operations. Here, we present a quantum optical pattern recognition method for binary classification tasks. It classifies objects without reconstructing their images, using the rate of two-photon coincidences at the output of a Hong-Ou-Mandel interferometer, where both the input and the classifier parameters are encoded into single-photon states. Our method exhibits the behaviour of a classical neuron of unit depth. Once trained, it shows a constant $${{\mathcal{O}}}(1)$$ O ( 1 ) complexity in the number of computational operations and photons required by a single classification. This is a superexponential advantage over a classical artificial neuron.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Universal control in bosonic systems with weak Kerr nonlinearities

Resonators with weak single-photon self-Kerr nonlinearities can theoretically be used to prepare Fock states in the presence of a loss much larger than their nonlinearities. Two necessary ingredients are large displacements and a two-photon (parametric) drive. Here, in this study, we find that these systems can be controlled to achieve any desired gate operation in a finite-dimensional subspace (whose dimensionality can be chosen at will). Moreover, we show that the two-photon driving requirement can be relaxed and that full controllability is achievable with only one-photon (linear) drives. We make use of both Trotter-Suzuki decompositions and gradient-based optimization to find control pulses for a desired gate, which reduces the computational overhead by using a small blockaded subspace. We also discuss the infidelity arising from input power limitations in realistic settings, as well as from corrections to the rotating-wave approximation. Our universal control protocol opens the possibility for quantum information processing using a wide range of lossy systems with weak nonlinearities.

Yuan, Ming [Univ. of Chicago, IL (United States)] ↗
DOE OSTI2024

Quantum Imaging with X-rays

Quantum imaging encompasses a broad range of methods that exploit the quantum properties of light to capture information about an object. One such approach involves using a two-photon quantum state, where only one photon interacts with the object being imaged while its entangled partner carries spatial or temporal information. To implement this technique, it is necessary to generate specific quantum states of light and detect photons at the single-photon level. While this method has been successfully demonstrated in the visible electromagnetic spectrum, extending it to X-rays has faced significant challenges due to the difficulties in producing a sufficient rate of X-ray photon pairs and detecting them with adequate resolution. Here, we demonstrate record high rates of correlated X-ray photon pairs produced via a spontaneous parametric down-conversion process and we employ these photons to perform quantum correlation imaging of several objects, including a biological sample (E. cardamomum seedpod). Notably, we report an unprecedented detection rate of about 6,300 pairs per hour and the observation of energy anti-correlation for the X-ray photon pairs. We also present a detailed analysis of the properties of the down-converted X-ray photons, as well as a comprehensive study of the correlation imaging formation, including a study of distortions and corrections. These results mark a substantial advancement in X-ray quantum imaging, expanding the possibilities of X-ray quantum optical technologies, and illustrating the pathway towards enhancing biological imaging with reduced radiation doses.

Gofron, Kaz [ORNL] (ORCID:0000000314415736)↗
NASA NTRS1983

Equilibria in Strongly Magnetized Pair Plasmas

Positron-electron pair densities for a thermal plasma in the steady-state equilibrium where pair production balances pair annihilation are found as a function of temperature kT / mc(2) approx. 1, source size R and magnetic field strength B. When the plasma is strongly magnetized, B 10(12) G, the important processes are synchrotron radiation, one-photon (magnetic) pair production and two-photon pair annihilation. An analytic solution for the equilibrium pair density, found under certain simplifying assumptions, shows that optically thin equilibria exist only for sufficiently small source sizes.

Harding, A. K.↗
NASA NTRS1984

Pair production rates in mildly relativistic, magnetized plasmas

Electron-positron pairs may be produced by either one or two photons in the presence of a strong magnetic field. In magnetized plasmas with temperatures kT approximately sq mc, both of these processes may be important and could be competitive. The rates of one-photon and two-photon pair production by photons with Maxwellian, thermal bremsstrahlung, thermal synchrotron and power law spectra are calculated as a function of temperature or power law index and field strength. This allows a comparison of the two rates and a determination of the conditions under which each process may be a significant source of pairs in astrophysical plasmas. It is found that for photon densities n(gamma) or = 10 to the 25th power/cu cm and magnetic field strengths B or = 10 to the 12th power G, one-photon pair production dominates at kT approximately sq mc for a Maxwellian, at kT approximately 2 sq mc for a thermal bremsstrahlung spectrum, at all temperatures for a thermal synchrotron spectrum, and for power law spectra with indices s approximately 4.

Burns, M. L.↗