Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transient event”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Single Event Transient Analysis of an SOI Operational Amplifier for Use in Low-Temperature Martian Exploration

The next generation of Martian rover#s to be launched by JPL are to examine polar regions where temperatures are extremely low and the absence of an earth-like atmosphere results in high levels of cosmic radiation at ground level. Cosmic rays lead to a plethora of radiation effects including Single Event Transients (SET) which can severely degrade microelectronic functionality. As such, a radiation-hardened, temperature compensated CMOS Single-On-Insulator (SOI) Operational Amplifier has been designed for JPL by the University of Tennessee and fabricated by Honeywell using the SOI V process. SOI technology has been shownto be far less sensitive to transient effects than both bulk and epilayer Si. Broad beam heavy-ion tests at the University of Texas A&M using Kr and Xebeams of energy 25MeV/amu were performed to ascertain the duration and severity of the SET for the op-amp configured for a low and high gain application. However, some ambiguity regarding the location of transient formation required the use of a focused MeV ion microbeam. A 36MeV O6(+) microbeam. the Sandia National Laboratory (SNL) was used to image and verify regions of particular concern. This is a viewgraph presentation

operational amplifier↗
NASA NTRS1996

Heavy Ion and Proton Induced Single Event Transients in Linear Devices

This paper presents a display of heavy-ion and proton-induced single event transients for selected linear devices. The transient vital signs are serious; low LET threshold, high voltage amplitude and extended pulse duration (microsecs.).

heavy ions ions transients linear devices LET thre↗
NASA NTRS2017

Compendium of Single Event Transient (SET) and Total Ionizing Dose (TID) Test Results for Commonly Used Voltage Comparators

This data compendium reports single event transient (SET) and total ionizing dose (TID) test results for commonly used commercial-off-the-shelf (COTS) and radiation hardened voltage comparators targeted for possible use in space-based missions. Interesting trends in the variability of the radiation performance of these devices due to differences in lot date codes, manufacturers, circuit design, and test conditions are analyzed herein.

Bozovich, Amanda↗
NASA NTRS2011

Towards an Automated Classification of Transient Events in Synoptic Sky Surveys

We describe the development of a system for an automated, iterative, real-time classification of transient events discovered in synoptic sky surveys. The system under development incorporates a number of Machine Learning techniques, mostly using Bayesian approaches, due to the sparse nature, heterogeneity, and variable incompleteness of the available data. The classifications are improved iteratively as the new measurements are obtained. One novel featrue is the development of an automated follow-up recommendation engine, that suggest those measruements that would be the most advantageous in terms of resolving classification ambiguities and/or characterization of the astrophysically most interesting objects, given a set of available follow-up assets and their cost funcations. This illustrates the symbiotic relationship of astronomy and applied computer science through the emerging disciplne of AstroInformatics.

classification↗
DOE OSTI2022

Characterizing Flow Instabilities During Transient Events in the Turbine Rim Seal Cavity

Abstract Gas turbine engine design requires considerations not only for long-term steady operation but also for critical transient events. Aircraft engines undergo significant stress during takeoff and landing, while power generation turbines must be flexible for hot restarts as renewable energy sources come online and offline. During these transient cycles, engines sustain wear and degradation that can lead to a reduction in the lifespan of their components and more frequent, costly maintenance. Cooling flows are often used to mitigate these effects, but can lead to complex and problematic flow interactions. This study uses high-frequency response pressure probes and heat flux gauges in the rim seal cavity of a one-stage research turbine to characterize the properties of large-scale flow structures during transient operation. A continuous-duration turbine testing facility provides the ability to assess the importance of these transients by first reaching steady-state operation before imposing transient behaviors. Although previous studies have conducted similar measurements for steady purge flows and wheel speeds, varying these parameters to simulate transient effects revealed several unique phenomena not identifiable with discrete steady measurements. The measurement approach connects the varied transient parameter to the behavior of the flow structures to enable a better understanding of the type of instability observed and the root cause of its formation. In particular, a relationship between instability cell formation and rim sealing effectiveness was identified using experimental data and was supported through computational simulations.

Engineering↗
NASA NTRS2006

Single Event Transients in Voltage Regulators for FPGA Power Supply Applications

As with other bipolar analog devices, voltage regulators are known to be sensitive to single event transients (SET). In typical applications, large output capacitors are used to provide noise immunity. Therefore, since SET amplitude and duration are generally small, they are often of secondary importance due to this capacitance filtering. In low voltage applications, however, even small SET are a concern. Over-voltages may cause destructive conditions. Under-voltages may cause functional interrupts and may also trigger electrical latchup conditions. In addition, internal protection circuits which are affected by load as well as internal thermal effects can also be triggered from heavy ions, causing dropouts or shutdown ranging from milliseconds to seconds. In the case of FPGA power supplies applications, SETS are critical. For example, in the case of Actel FPGA RTAX family, core power supply voltage is 1.5V. Manufacturer specifies an absolute maximum rating of 1.6V and recommended operating conditions between 1.425V and 1.575V. Therefore, according to the manufacturer, any transient of amplitude greater than 75 mV can disrupt normal circuit functions, and overvoltages greater than 100 mV may damage the FPGA. We tested five low dropout voltage regulators for SET sensitivity under a large range of circuit application conditions.

Poivey, Christian↗
DOE OSTI2026

The effect of high-power transient events on tungsten and tungsten coatings used for radio frequency launcher applications

High-temperature plasma-facing material coatings used for radio frequency (RF) launchers need to be robust enough to survive RF breakdown arcing or other transient events from the plasma (e.g., an edge localized mode) without causing a catastrophic failure of the coating. High-power transient effects are being explored by using an RF-induced vacuum arc to determine the robustness of tungsten coatings made by a variety of manufacturing methods. A 1/4-wavelength resonant section of vacuum transmission line terminated with an open circuit electrode structure with a well-defined electric field (30-60 kV/mm) produces repeatable arcing conditions. The initial focus is on tungsten as a plasma-facing material, including sintered tungsten, tungsten coatings on steel produced via physical vapor deposition (PVD), and functionally graded tungsten/steel coatings deposited by low-pressure plasma-spraying (LPPS). Thin PVD coatings (1-2 microns) fail catastrophically from an arc and result in severe delamination of the coating. The arc-induced damage of thicker coatings, such as those made via LPPS, tend to be restricted to the top few microns of the surface. Arcing often initiates on sharp surface microstructures and causes localized melting of tungsten at the surface of all the materials studied and results in resolidified melt pools with surface cracks. The resolidified surface results in a reduction in overall deuterium retention when exposed to typical RF plasma sheath conditions.

Caughman, John [ORNL] (ORCID:0000000206091164)↗
NASA NTRSDate not supplied

Transient Events in the Chromosphere and Corona with IBIS, ALMA, IRIS, and XRT

The connection between the photosphere, chromosphere, and corona is essential for understanding energy flow throughout the solar atmosphere. Recent work shows strong correlations between observations of the chromospheric mm-continuum (e.g., ALMA) and the low chromospheric H alpha (e.g., IBIS), and also between mm-continuum and the upper chromosphere and corona, such as SDO and XRT. However, the features which correlate between ALMA and IBIS are not those that correlate between ALMA and observations higher in the atmosphere. In this work, we examine transient features observed from the photosphere to the corona, and determine when and where the atmospheric features agree, and when they diverge. In particular, we show that the established IBIS line-width and ALMA Band 3 relationships break down during transient events (such as blue-wing excursions), though the ALMA and the H-alpha blue wing transients appear related. We also explore features of these transients that appear to foreshadow coronal signatures and find consistent connections and time-lags between transients observed in ALMA and features seen in the upper atmosphere.

A.R. Kobelski↗
NASA NTRS1995

A case study of transient event motion in the magnetosphere and in the ionosphere

We present a case study of the magnetospheric and ionospheric response to a series of repetitive (7-8 min) solar wind dynamic pressure and interplanetary magnetic field (IMF) strength variations generated at the bow shock. During a period of duskward and antisunward IMF orientation, the magnetospheric and ionospheric observations indicate transient events moving dawnward and duskward away from a point of origin at or after local noon. In contrast, during a subsequent period of dawnward and antisunward IMF orientation, the observations indicate events moving duskward away from a point of origin at or prior to 0900 LT. We consider explanations in terms of pressure pulse driven riplets on the magnetopause or directly driven bursts of antiparallel merging.

Korotova, G. I.↗
NASA NTRS1977

Summary of the CTS Transient Event Counter data after one year of operation

The environmental charging of satellite surfaces during geomagnetic substorms is the apparent cause of a significant number of anomalous events occurring on geosynchronous satellites since the early 1970's. Electromagnetic pulses produced in connection with the differential charging of insulators can couple into the spacecraft harness and cause electronic switching anomalies. An investigation conducted to determine the response of the spacecraft surfaces to substorm particle fluxes makes use of a harness transient detector. The harness transient detector, called the Transient Event Counter (TEC) was built and integrated into the Canadian-American Communications Technology Satellite (CTS). A description of the TEC and its operational characteristics is given and the obtained data are discussed. The data show that the satellite surfaces appear to be charged to the point that discharges occur and that the discharge-induced transients couple into the wire harnesses.

Stevens, N. J.↗
NASA NTRS1995

Interplanetary magnetic field orientation for transient events in the outer magnetosphere

It is generally believed that flux transfer events (FTEs) in the outer dayside magneosphere, usually identified by transient (approximately 1 min) bipolar magneitc field perturbations in the direction normal to the nominal magnetopause, occur when the magnetosheath magetic field has a southward component. We compare the results of three methods for determining the magnetosheath magnetic field orientationat the times of previously identified UKS/IRM events: (1) the average magnetosheath magnetic field orientation in the 30-min period adjacent to the nearest magnetopause crossing, (2) the magnetosheath magnetic field orientation observed just outside the magnetopause, and (3) the lagged interplanetary magnetic field (IMF) orientation at the time of the transient events. Whereas the results of method 2 indicate that the events tend to occur for a southward magnetosheath magnetic field, the results of methods 1 and 3 show no such tnedency. The fact that the three methods yield significantly diffeent results emphasizes the need for caution in future studies.

Sibeck, D. G.↗
NASA NTRS1978

SAS 3 observations of two X-ray transient events with precursors

SAS 3 has observed two unusual fast transient X-ray events from different sources, one lasting about 150 s and one, approximately 1500 s. Both events were preceded by precursor pulses which lasted a few seconds and which rose and fell in less than 0.4 s. The precursors were separated from the 'main' events by several seconds, during which no X-rays were detected. There are similarities between the two main events and X-ray bursts in both their temporal and spectral evolution. The spectra of the main events started out much softer than the spectra of the precursors, became harder as they approached maximum intensity, and softened as they decayed. In the 1500-s event, X-rays with energies greater than 10 keV were delayed by about 80 s compared with 1.5-6-keV X-rays. A blackbody fit to the spectral data of the main event of approximately 1500-s duration gives a maximum temperature of 29 million K and a radius for the emitting region of at least about 9 km (at a distance of 10 kpc); this is similar to the temperature and sizes found for several X-ray burst sources.

Hoffman, J. A.↗
NASA NTRS2022

Mechanisms of Heavy Ion-, Focused X-Ray-, and Pulsed Laser-Induced Single Event Transients in an Epitaxial Silicon Diode

Heavy ion-, focused X ray-, and pulsed laser induced single event effects in an epitaxial silicon diode were simulated using Sentaurus Technology Computer Aided Design (TCAD). The variation of the potential with time in simulation agrees with previous experimental data, which suggests that the different radiation sources result in different amounts of potential modulation. The charge generation spatial profile strongly affects the potential modulation. The longitudinal range and starting location of generated charge most strongly impacts the amount of potential modulation, while the radial width has a slight effect, and the temporal duration of charge injection has negligible impact on potential modulation

Kaitlyn L. Ryder↗
DOE OSTI2022

SNAD transient miner: Finding missed transient events in ZTF DR4 using k-D trees

Here we report the automatic detection of 11 transients (7 possible supernovae and 4 active galactic nuclei candidates) within the Zwicky Transient Facility fourth data release (ZTF DR4), all of them observed in 2018 and absent from public catalogs. Among these, three were not part of the ZTF alert stream. Our transient mining strategy employs 41 physically motivated features extracted from both real light curves and four simulated light curve models (SN Ia, SN II, TDE, SLSN-I). These features are input to a k-D tree algorithm, from which we calculate the 15 nearest neighbors. After pre-processing and selection cuts, our dataset contained approximately a million objects among which we visually inspected the 105 closest neighbors from seven of our brightest, most well-sampled simulations, comprising 89 unique ZTF DR4 sources. Our result illustrates the potential of coherently incorporating domain knowledge and automatic learning algorithms, which is one of the guiding principles directing the SNAD team. It also demonstrates that the ZTF DR is a suitable testing ground for data mining algorithms aiming to prepare for the next generation of astronomical data.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1995

Composition of transient events in the solar wind: Ulysses/SWICS observations

The Ulysses mission covers an extensive data base which includes an in-ecliptic phase (Oct 1990 - Feb 1992), a southern hemisphere polar pass (with a southernmost point of 80 deg S heliographic latitude reached in Sept 1994). and a south to north transit passing through the ecliptic plane (March 1995). The Solar Wind Ion Composition Spectrometer measures solar wind ion composition, including charge state composition. for all types of solar wind flows. In-ecliptic measurements of the charge states of solar wind heavy ions in transient-related solar wind. such as solar wind associated with coronal mass c ejections (CMEs), typically indicate hotter than normal coronal temperatures. This distinction is not as prevalent for higher latitude observations. In this paper, we present temporal and latitudinal variations in the charge state composition of Oxygen, Silicon, and Iron for several transient-related solar wind events.

Galvin, A. B.↗