Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thermal striping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Localizing the non-thermal X-ray emission of PSR J2229+6114 from its multi-wavelength pulse profiles

Context.Pulsars are detected over the whole electromagnetic spectrum, from radio wavelengths up to very high energies, in the GeV-TeV range. While the radio emission site for young pulsars is well constrained to occur at altitudes about several percent of the light-cylinder radius andγ-ray emission is believed to be produced in the striped wind, outside the light cylinder, the non-thermal X-ray production site remains unknown. Aims.The aim of this Letter is to localize the non-thermal X-ray emission region based on a multi-wavelength pulse profile fitting for PSR J2229+6114, which stands as a particularly good candidate given its high X-ray brightness. Methods.Based on the geometry deduced from the joint radio andγ-ray pulse profiles, we fixed the magnetic axis inclination angle and the line-of-sight (LoS) inclination angle. However, we left the region of X-ray emission unlocalized, setting it somewhere between the surface and the light cylinder. We localized this region and its extension by fitting the X-ray pulse profile as observed by the NICER,NuSTAR, and RXTE telescopes in the ranges of 2–7 keV, 3–10 keV, and 9.4–22.4 keV, respectively. Results.We constrained the non-thermal X-ray emission to arise from altitudes between 0.2 r L and 0.55 r L wherer L is the light-cylinder radius. The magnetic obliquity is approximatelyα ≈ 45° −50° and the LoS inclination angle isζ ≈ 32° −48°. Conclusions.This Letter is among the first works to offer a tight constraint on the location of non-thermal X-ray emission from pulsars. We plan to apply this procedure to several other promising candidates to confirm this new result.

Astronomy & Astrophysics↗
DOE OSTI2020

Structural, magnetic, and electronic evolution of the spin-ladder system BaFe 2 S 3-x Se x with isoelectronic substitution

We reWe report experimental studies of a series of BaF e 2 S 3 - x Se x ( 0 ≤ $x$ ≤ 3 ) single crystals and powder specimens using x-ray diffraction, neutron-diffraction, muon-spin-relaxation, and electrical transport measurements. A structural transformation from $C$ $mcm$ ( BaFe 2 Se 3 ) to $P$ $nma$ ( BaFe 2 Se 3 ) was identified around $x$ = 0.7 - 1 . Neutron-diffraction measurements on the samples with $x$ = 0.2, 0.4, and 0.7 reveal that the Néel temperature of the stripe antiferromagnetic order is gradually suppressed from ~120 to 85 K, while the magnitude of the ordered Fe 2+ moments shows very little variation. Similarly, the block antiferromagnetic order in BaFe 2 Se 3 remains robust for 1.5 ≤ $x$ ≤ 3 with negligible variation in the ordered moment and a slight decrease of the Néel temperature from 250 K ( $x$ = 3 ) to 225 K ( $x$ = 1.5 ). The sample with $x$ = 1 near the $C$ $mcm$ and $P$ $nma$ border shows coexisting, two-dimensional, short-range stripe- and block-type antiferromagnetic correlations. The system remains insulating for all $x$ , but the thermal activation gap shows an abrupt increase when traversing the boundary from the $C$ $mcm$ stripe phase to the $P$ $nma$ block phase. The results demonstrate that the crystal structure, magnetic order, and electronic properties are strongly coupled in the BaFe 2 S 3-x Se x system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Charge Condensation and Lattice Coupling Drives Stripe Formation in Nickelates

Revealing the predominant driving force behind symmetry breaking in correlated materials is sometimes a formidable task due to the intertwined nature of different degrees of freedom. This is the case for La 2–x Sr x NiO 4+δ , in which coupled incommensurate charge and spin stripes form at low temperatures. Here, we use resonant x-ray photon correlation spectroscopy to study the temporal stability and domain memory of the charge and spin stripes in La 2–x Sr x NiO 4+δ . Although spin stripes are more spatially correlated, charge stripes maintain a better temporal stability against temperature change. More intriguingly, charge order shows robust domain memory with thermal cycling up to 250 K, far above the ordering temperature. Furthermore, these results demonstrate the pinning of charge stripes to the lattice and that charge condensation is the predominant factor in the formation of stripe orders in nickelates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

MURR LEU structural and thermal hydraulics analyses: Part I – Preliminary irradiation thermo-mechanical behavior

The University of Missouri Research Reactor (MURR) is expected to be converted from highly enriched uranium (HEU, ≥ 20 wt% U-235) U-Al x dispersion fuel to low-enriched uranium (LEU, < 20 wt% U-235) with U-10Mo monolithic fuel. This work introduces high-fidelity irradiation thermo–mechanical (T-M) analysis of the MURR LEU focusing on changes in coolant channel gap thickness. Three-dimensional (3D) finite element (FE) models were developed to simulate the irradiation T-M behavior of the MURR LEU element with all 23 curved fuel plates, the two side plates, and the combs. It was shown that channel gap thickness changes were influenced not only by plate thickness variations due to fuel swelling and creep but also by the radial displacement of consecutive MURR LEU plates. Modeling the fuel element assembly captured side plate displacements, which were shown to reduce radial fuel plate displacements towards the convex side. The maximum local radial displacement in the element was predicted at the end of life (EOL) as 23.7 mil (602.0 µm) on the lateral centerline of plate 23 towards the convex side. The maximum stripe-averaged reduction in channel gap thickness, particularly relevant for thermal hydraulics (TH) safety analysis, was calculated as 15.9 mil (403.9 µm) in single-side heated channel 24 (the outermost channel). These results account for the thermal resistance from the oxide build-up on cladding surfaces which was shown to be up to 0.82 mil (20.8 µm) thick. It was demonstrated that accounting for oxide layer thermal resistance led to a 10 °C higher peak fuel temperature and a 4.4 mil (111.8 µm) greater maximum local radial displacement. The impact of the calculated channel gap thickness changes on the MURR LEU TH safety analysis is evaluated in Part II.

Irradiation thermo-mechanical analysis↗
NASA NTRS2017

Performance of an X-Ray Microcalorimeter with a 240 Micron Absorber and a 50 Micron TES Bilayer

We have been developing superconducting transition-edge sensor (TES) microcalorimeters for a variety of potential astrophysics missions, including Athena. The X-ray Integral Field Unit (X-IFU) instrument on this mission requires close-packed pixels on a 0.25 mm pitch, and high quantum efficiency between 0.2 and 12 keV. The traditional approach within our group has been to use square TES bilayers on molybdenum and gold that are between 100 and 140 microns in size, deposited on silicon nitride membranes to provide a weak thermal conductance to a 50 mK heat bath temperature. It has been shown that normal metal stripes on top of the bilayer are needed to keep the unexplained noise at a level consistent with the expected based upon estimates for the non-equilibrium non-linear Johnson noise.In this work we describe a new approach in which we use a square TES bilayer that is 50 microns in size. While the weak link effect is much stronger in this size of TES, we have found that excellent spectral performance can be achieved without the need for any normal metal strips on top of the TES. A spectral performance of 1.58 eV at 6 KeV has been achieved, the best resolution seen in any of our devices with this pixel size. The absence of normal metal stripes has led to more uniform transition shapes, and more reliable excellent spectral performance. The smaller TES size has meant that that the thermal conductance to the heat bath, determined by the perimeter length of the TES and the membrane thickness, is lower than on previous devices, and thus has a lower count rate capability. This is an advantage for low count-rate applications where the slower speed enables easier multiplexing in the read-out, thus potential higher multiplexing factors. In order to recover the higher count rate capabilities, a potential path exits using thicker silicon nitride membranes to increase the thermal conductance to the heat bath.

Miniussi, Antoine R.↗
DOE OSTI2024

Strain-modulated intercalated phases of Pb monolayer with dual periodicity in SiC(0001)-graphene interface

Intercalation of metal atoms at the SiC(0001)-graphene (Gr) interface can provide confined 2D metal layers with interesting electronic properties. The intercalated Pb monolayer (ML) has shown the coexistence of the Gr(10 x 10)-moiré and a stripe phase, which still lacks understanding. Using density functional theory calculation and thermal annealing with ab initio molecular dynamics as motivated by experiment, we have studied the formation energy of Gr/Pb/SiC(0001) for different Pb coverages. Near the coverage of a Pb(111)-like ML mimicking the (10 x 10)-moiré, we find a slightly more stable stripe structure, where one half of the structure has compressive strain with Pb occupying the Si-top sites and the other half has tensile strain with Pb off the Si-top sites. This stripe structure along the Gr zigzag direction has a periodicity of 2.3 nm across the [1$\overline{2}$10] direction agreeing with the previous observations using scanning tunneling microscopy. Analysis with electron density difference and density of states show the tensile region has a more metallic character than the compressive region, while both are dominated by charge transfer from Pb ML to SiC(0001). As a result, the small energy difference between the stripe and Pb(111)-like structures means the two phases are almost degenerate and can coexist, which explains the experimental observations.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of Lateral Conduction in a Rectangular Fuel Plate and Optimum Stripe Widths for the OPAL Reactor

The impetus for this work is the Proliferation Resistance Optimization (PRO-X) program, which was created by the National Nuclear Security Administration (NNSA) of the US Department of Energy (DOE) to provide a framework for developing reactor designs that minimize the production of special nuclear materials while maximizing performance for peaceful uses. The Argentine company INVAP and Argonne National Laboratory collaborated to share knowledge and expertise regarding the thermal analysis of research reactors. Working together, they designed a series of test problems based on the Open Pool Australian Light Water (OPAL) reactor, whose fuel is in the form of flat plates cooled by water flowing through narrow rectangular channels. ANL used their PLTEMP/ANL code. INVAP used their TERMIC code (and its new multi-plate version, TERMIC-MP). Then, INVAP and ANL compared the two sets of results. 1-D models were used during the collaboration since for research reactor analysis, largely 1-D thermal-hydraulics models are commonly used because they are simple to apply and technically defendable. The collaboration between the two organizations aims for improvements in thermal-hydraulic models. Improvements to methods and models can reduce modeling uncertainties and excessive conservatism, allowing greater reactor performance without reducing predicted safety margins. Therefore, these improvements potentially expand the design space, making additional designs feasible, which, in turn, may achieve better fuel utilization and proliferation resistance in the designs. This report provides justification for the lateral node size (stripe width) chosen for the 1-D computer models during the collaboration. The lateral heat conduction in OPAL fuel plates is evaluated using the two-dimensional conduction capability of PLTEMP/ANL to determine a representative hot-stripe width that can be conservatively used for one-dimensional steady-state thermal-hydraulic analysis. Basically, a representative hot-stripe width needs to be selected so that the actual heat flux averaged over this stripe width is greater than or equal to the maximum heat flux obtained by the two-dimensional analysis. Detailed results in this report show that a hot-stripe width of 8.125 mm can be conservatively used for the one-dimensional thermal-hydraulics analysis of all plates. Therefore, eight equal stripes (8.125 mm each) are recommended to be modeled in the MCNP and PLTEMP/ANL full core models of the OPAL reactor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Simultaneous Observations of Localized and Global Drift Resonance

In this study, we present Van Allen Probe observations showing that seed (hundreds of keV) and core ( ≳ 1 MeV) electrons can resonate with ultra-low-frequency (ULF) wave modes with distinctive m values simultaneously. An unusual electron energy spectrogram with double-banded resonant structure was recorded by energetic particle, composition, and thermal plasma (ECT)-magnetic electron ion spectrometer (MagEIS) and, meanwhile, boomerang stripes in pitch angle spectrogram appeared at the lower energy band. A localized drift resonance with m = 10 wave component was responsible for the resonant band peaked at ~200 keV while a global drift resonance with m = 3 component gave rise to the upper band resonance peaked at ~1 MeV. Time-Of-Flight on boomerang stripes suggested that the localized drift resonance with ~200 keV electrons was confined within the plasmaspheric plume. Electron flux modulations were reproduced by numerical simulations in good consistency with the observations, supporting the scenario that localized and global drift resonance could coexist in the outer belt electron dynamics simultaneously.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Magnetic Phase Diagram of 2D Magnet Fe 5– x GeTe 2 Revealed by Cryogenic Lorentz 4D-STEM

A two-dimensional van der Waals ferromagnet Fe 5–x GeTe 2 (F5GT) exhibits room-temperature magnetic transition and magnetic anisotropy. Studies have identified diverse magnetic states, including stripe domains, skyrmionic type-I and topologically trivial type-II bubbles, depending on the magnetic and thermal history. Yet, the underlying micromagnetic energetics driving these states remains unclear. Here, we establish the magnetic phase diagram of bulk F5GT using cryogenic Lorentz four-dimensional scanning transmission electron microscopy. We reveal that stripe domains spontaneously form upon zero-field cooling, while metastable magnetic bubbles are stabilized by external fields. Transitions from type-I to type-II bubbles are driven by an oblique external field. Micromagnetic simulations confirm that these transitions arise from the interplay of uniaxial anisotropy, dipolar interactions, and external fields, without requiring significant Dzyaloshinskii–Moriya Interaction (DMI). In conclusion, these findings clarify the micromagnetic origin of spin textures of F5GT and establish it as a tunable platform for nanoscale topological magnetism.

2D Magnets↗
NASA NTRS2016

Weak-Lensing Mass Calibration of the Atacama Cosmology Telescope Equatorial Sunyaev-Zeldovich Cluster Sample with the Canada-France-Hawaii Telescope Stripe 82 Survey

Mass calibration uncertainty is the largest systematic effect for using clustersof galaxies to constrain cosmological parameters. We present weak lensing mass measurements from the Canada-France-Hawaii Telescope Stripe 82 Survey for galaxy clusters selected through their high signal-to-noise thermal Sunyaev-Zeldovich (tSZ) signal measured with the Atacama Cosmology Telescope (ACT). For a sample of 9 ACT clusters with a tSZ signal-to-noise greater than five, the average weak lensing mass is (4.8 plus or minus 0.8) times 10 (sup 14) solar mass, consistent with the tSZ mass estimate of (4.7 plus or minus 1.0) times 10 (sup 14) solar mass, which assumes a universal pressure profile for the cluster gas. Our results are consistent with previous weak-lensing measurements of tSZ-detected clusters from the Planck satellite. When comparing our results, we estimate the Eddington bias correction for the sample intersection of Planck and weak-lensing clusters which was previously excluded.

Battaglia, N.↗
NASA NTRS2018

Performance of an X-ray Microcalorimeter with a 240 μm Absorber and a 50 μm TES Bilayer

Superconducting transition-edge sensor (TES) microcalorimeters are being developed for a variety of potential astrophysics missions, including Athena. The X-ray integral field unit instrument on this mission requires close-packed pixels on a 0.25 mm pitch, and high quantum efficiency between 0.2 and 12 keV. In this work, we describe a new approach with 50 μm square TESs consisting of a Mo/Au bilayer, deposited on silicon nitride membranes to provide a weak thermal conductance to a ~50 mK heat bath. Larger TESs usually have additional normal metal stripes on top of the bilayer to reduce the noise. However, we have found that excellent spectral performance can be achieved without the need for any normal metal stripes on top of the TES. A spectral performance of 1.58+/-0.12 eV at 5.9 keV has been achieved, the best resolution seen in any of our devices with this pixel size.

Miniussi, Antoine R.↗
NASA NTRS1990

Magnetically striped relativistic magnetohydrodynamic winds - The Crab Nebula revisited

Previous relativistic pair plasma MHD wind models of the Crab Nebula indicate that the ratio of the wind's Poynting flux to particle kinetic energy flux must be very small. However, many current theories of pulsar magnetospheres and pulsar observations suggest that the spin-down luminosity should be primarily electromagnetic in origin and outward transport. For an oblique rotator, the asymptotic wind magnetic field near the rotational equator should consist of stripes of alternating toroidal field. A simple model of an initially high-sigma striped MHD wind is developed which describes the reconnection annihilation of the opposite polarity stripes as the wind flows radially outward. The initially dominant Poynting flux is converted into particle thermal and directed kinetic energy well within the inner standing shock which terminates the superfast wind.

Coroniti, F. V.↗
NASA NTRS2017

Electronic Crosstalk Impact Assessment in the Terra MODIS Mid-Wave Infrared Bands

The Moderate Resolution Imaging Spectroradiometer (MODIS) on board the Terra spacecraft is one of thekey instruments in NASA's Earth Observing System. Since 2000, MODIS has collected continuous data in 36spectral bands ranging in wavelength between 0.4 µm and 14.2 µm. Since before launch, signal contamination inthe form of electronic crosstalk has been observed in many of the MODIS thermal emissive bands, particularlyfor bands 27 30, a correction for which has been applied to the current Collection 6 algorithm. The mid-waveinfrared bands in Terra MODIS, 20 25, also show signs of electronic crosstalk contamination, which can beseen clearly during observations of the Moon. In this paper, we'll present an impact assessment of electroniccrosstalk on the mid-wave infrared bands in Terra MODIS. We will also derive correction coefficients from thelunar observations, which can be applied to correct the calibrated radiance in the MODIS Level-1B product. Wewill provide an analysis of these results and potential improvements to the MODIS Level-1B product.

calibration↗
DOE OSTI2022

Anisotropic Thermally Conductive Composites Enabled by Acoustophoresis and Stereolithography

Opportunities to improve thermal management in electronic devices are currently hindered by processing constraints that limit thermal conductivity in polymer-matrix composites. Active patterning of filler particles is a promising route to improve conductivity while retaining processability by improving particle contact density and directing heat along optimized pathways. Here, we employ acoustic patterning to align and compact filler particles into stripes during stereolithographic 3D printing. This approach produces polymer-based composite materials with highly efficient embedded heat transport pathways which reach 95 vol% particle utilization (relative to the parallel conduction upper limit). These composites exhibit anisotropic thermal conductivity up to 300% higher than unpatterned composites, with in-plane anisotropy ratios of up to 350%. Combining this high conductivity with 3D printing enables materials with engineered heat networks that optimize transport from hot spots to heatsinks while maintaining low viscosity for fast particle patterning and for infiltration around electronic components. Finally, numerical simulations of acoustic assembly of particles with varied geometry, when compared to experimentally characterized particle packing, illuminate pathways for further improving conductivity by optimizing particle geometry for alignment and stacking of particles with maximum contact surface area.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Emergence of a Spin Microemulsion in Spin-Orbit Coupled Bose-Einstein Condensates

We report the first numerical prediction of a “spin microemulsion”—a phase with undulating spin domains resembling classical bicontinuous oil-water-surfactant emulsions—in two-dimensional systems of spinor Bose-Einstein condensates with isotropic Rashba spin-orbit coupling. Using field-theoretic numerical simulations, we investigated the melting of a low-temperature stripe phase with supersolid character and find that the stripes lose their superfluidity at elevated temperature and undergo a Kosterlitz-Thouless-like transition into a spin microemulsion. Momentum distribution calculations highlight a thermally broadened occupation of the Rashba circle of low-energy states with macroscopic and isotropic occupation around the ring. Here, we provide a finite-temperature phase diagram that positions the emulsion as an intermediate, structured isotropic phase with residual quantum character before transitioning at higher temperature into a structureless normal fluid.

Finite temperature field theory↗
NASA NTRS1970

Linear geologic structure and magic rock discrimination as determined from infrared data

Color infrared photographs of the Beartooth Mountains, Montana show the distribution of mafic dikes and amphibolite bodies. Lineaments that cross grassy plateaus can be identified as dikes by the marked constrast between the dark rocks and the red vegetation. Some amphibolite bodies in granitic terrain can also be detected by infrared photography and their contacts can be accurately drawn due to enchanced contrast of the two types of rock in the near infrared. Reflectance measurements made in the field for amphibolite and granite show that the granite is 25% to 50% more reflective in the near infrared than in the visible region. Further enhancement is due to less atmospheric scattering than in the visible region. Thermal infrared images of the Mill Creek, Oklahoma test site provided information on geologic faults and fracture systems not obtainable from photographs. Subtle stripes that cross outcrop and intervening soil areas and which probably record water distribution are also shown on infrared photographs.

Offield, T. W.↗
NASA NTRS1984

Evaluation of Landsat-4 Thematic Mapper and multispectral scanner data quality

Landsat-4 image data quality was evaluated for test sites in Iowa and Illinois. Radiometric and geometric quality was tested and an applications evaluation was carried out using a cooling-pond thermal-mapping example. Geometric quality was found to be generally very good. Small errors were found in registration of the middle IR bands of the TM and the thermal IR band was found to be misregistered by one 120-meter pixel. Radiometric quality of the TM is excellent with only minor striping effects.

Bartolucci, L. A.↗
DOE OSTI2024

Power Electronics Materials and Bonded Interfaces - Reliability and Lifetime

The need for reliable bonded interface materials is critical to realize the performance benefits of wide-bandgap devices in power electronic modules, especially in operating temperatures greater than 150 degrees Celsius. In this paper, we investigate the thermomechanical performance of sintered copper (Cu) as a large-area attachment, bonded between Cu baseplates and active-metal-bonded substrates, under accelerated thermal shock (-40 degrees Celsius to 200 degrees Celsius) conditions. In the fabrication phase of the samples, we used different stencil patterns and found out that the grid and stripe patterns resulted in a better outgassing of the residual organics during the sintering process, thereby ensuring a substantially improved bond quality than a full-area print. The paste consisted of Cu microflakes and we performed sintering using a Budatec SP300 sintering press at 275 degrees Celsius with 15 MPa of bonding pressure for 5 minutes in a nitrogen atmosphere. Under accelerated experiments, we monitored the degradation of the sintered Cu bond in the samples through C-mode scanning acoustic microscope (C-SAM) images. To quantify the defect percentage in C-SAM images, we investigated image denoising techniques to exclude the pattern prints. Finally, we cross-sectioned a sample and obtained digital microscope images, which revealed adhesive fracture as the dominant failure mechanism.

ADVANCED PROPULSION SYSTEMS↗